The NVIDIA NVS 3100 m driver update

Similar Questions

• Impossible to get resolution of 2560 x 1440 on external monitor on T410 with Nvidia NVS 3100 M

  I have a T410 with Nvidia NVS 3100 M with the driver version 189.55 connected to the external Acer monitor capable of 2560 x 1440, connected with DisplayPort cable. But, I can't get higher than 1920 x 1080 resolution. What should I do?
  Thank you

  I was using DisplayPort, but it made no difference. Finally, when I've updated my driver Nvidia lenovos site, it worked perfectly. Thank you

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• Tecra M3 - questions about the RAM maximum and graphics driver update

  Hi people,

  I have a Tecra M3 (Variant FBCF with the Geforce 6600 w / 128 MB) and I have two questions that I hope someone here can help me with:

  (1) what is the maximum amount of RAM that I can install here? The manual says 2 GB (2 x 1 GB), but I do not see why the laptop would be paralyzed this necessary way, cause as far as I know the 915G chipset can handle 4 GB of RAM. If anyone knows definitively what?

  (2) the latest drivers from nvidia for XP are 2005. As most of you probably know, nvidia systematically more than past performance with versions driver and adds compatibility with some games that end up in trouble. The real driver from the nvidia site does not install because it says that it cannot find any compatible hardware. Can't Toshiba even a pilot updated annually? There is a driver of 2007 for Vista, I can't believe that if they did, they decide refresh the XP one while they were to him. Any chance of their audience on this here? I could force the nvidia.com driver to install, but I don't think that it's necessarily a great idea.

  Thank you!

  Hello

  the maximum amount specified for this machine memory is 2 GB and 4 GB not but you can try it with 2x2gb modules.

  With regard to your graphics: Don t use the nvidia driver since it is not suitable for mobile graphics chipsets and has no timing in the driver that is needed to run flawlessly.

  I'd rather you to view laptopvideo2go and download some drivers here. :)

  Welcome them

• Qosmio F10: nVidia GF Go 5700 - driver update fails

  I have a problem:

  I'm not able to update the driver for the nvidia card of the 6.14.10.6612 (which since 2004!)
  I tried on the nvidia homepage, but none of the driver works with my laptop... (I've read that this is not recommended on other post, but it was my only chanche!)
  I also tried to download, Toshiba, the drivers from nvidia F30... without success!

  I need to update this driver because when I try to install x9.c windows MCE direct give me an error, a this is due to the 6.14.10.6612 pilot who did not have WHQL certificate...

  Please give me an answer...
  I need to install it as soon as possible!

  Hello

  If you n t find any new drivers on the Toshiba page then I guess there are no updates.
  New laptops sometimes use the same graphics card. Therefore, you should check the books that could support the same graphics card. Then go into the areas of driver for the graphics drivers. But if you want to find anything so unfortunately, it updates of any pilot aren t.

  Optionally, you can find something useful on the omega driver page.

  But be aware that the Toshiba drivers are NOT similar with the manufacture of graphics cards drivers. Drivers Toshiba supports a card protection against overheating and regulates the temperature of production because the computers laptops don't use modules of cooling for as desktop graphics cards

• The NVIDIA NDIS IO Control Driver service failed to start

  NVIDIA NDIS IO Control Driver service failed to start due to the following error: the system cannot find the specified file.

  It's the correct driver.

  Ooohhh, you see in the event Log?

  I looked in the NVIDIA forums and found this:

  http://nvidia.custhelp.com/cgi-bin/nvidia.cfg/php/enduser/std_adp.php?p_faqid=262&p_created=1117061806&p_sid=qP2bKYVi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MiwyJnBfcHJvZHM9MCZwX2NhdHM9MCZwX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2VhcmNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9bmRpcw**&p_li=&p_topview=1

  I have some NVIDIA cards, but not this one, so I can't recreate and test the suggestion...

  If the RemoveNvNdis.exe does not work (I think he must disable or remove completely the service), looks like he's some NVIDIA service that tries to start when you reboot, it cannot be started for some reason any.  Looks like you don't need to start.

  If you can find it in the Services of XP, you could check the properties and set the startup type to disabled, restart and see what things look like.  (Do you know how?)

  If the mere presence of the Service in your list of Services, then you mind, you can also delete the Service entirely (I want to it later, just to be ordered if it is always hanging out).

• HP Elitebook 8440p Energy Star: HP Elitebook 8440p Energy Star with NVIDIA NVS 3100 M press 3 monitors

  Performs:

  Model: HP Elitebook 8440p Energy Star

  Video: NVIDIA NVS 3100M

  CPU: Intel (r) Core i5 CPU M 540 @ 2.53 GHz

  RAM: 4 GB

  Running: Windows 7 SP1 64-bit

  Support 3 monitors?

  I have a docking station with 2 monitors connected and I want to get my laptop screen works with the 2 monitors.

  Whenever I try to extend the screen to more than one of my other screens.

  Thank you

  Jesse

  No triple monitor supports, sorry to say. You can have 2 of the 3, but not all 3 at the same time. The only way to do it is to get something like a USB to HDMI adapter to add the third screen.

  http://www.Amazon.com/cable-matters%C2%AE-SuperSpeed-adapter-2560x1440/DP/B00BPEV1XK/ref=sr_1_2?ie=UTF8&QID=1432133221&SR=8-2&keywords=USB+to+HDMI

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• NVIDIA geforce GT 545 driver update

  Hi, I bought a product personalized Pavilion H8 - 1080t #: LP029AV #ABA. I opted to have a Nvidia Gforce GT545 with 3 GB of vram. Until recently, I have difficulties with all programs.

  Now Photoshop was crashing when you do heavy graphics manipulations. I was wondering where I can find a newer for my video card driver as others have said once they install newer drivers, photoshop has stopped crashing. It was also almost a year saince driver was last updated. last update was 14/03/12. Would apreciate any help. TIA

  Cyberwasp, welcome to the forum.

  Here is a link to the section of the driver from nVidia on their Web site.  You can also use their "Automatic Detection" function if you are uncomfortable with the manual process.

  If your problem is solved, please click "accept as a Solution.

• Why my computer keep stop inadvertently with this message: address a problem with the NVIDIA Graphics Driver__NVIDIA graphics driver has stopped working properly. ? __

  Recently my computer (laptop) was stopped when I put the command "sleep".  It displays a message about my NVIDIA Graphics Driver does not. I have check the driver to use and it shows like th emost current and NVIDIA hardware works correctly... who is not lying.

  A recent Microsoft update would be the cause of this problem suddenly?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  Read the info on sleep disorders in the tutorial above.

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Also read this tutorial; as well as the 'related links' at the bottom of the links above.

  See you soon.

  Mick Murphy - Microsoft partner

• Strange boxes around elements (NVidia NVS 3100 M)

  On Windows 8 Pro, I noticed strange extra boxes around elements. I downloaded the Windows 8 of the driver version for my videocard (Driver version 9.18.13.280). I have all the updates of Windows installed.

  I uploaded a screenshot, you can see that extra orange box around the 'File' button in MS Outlook 2010. I noticed this elsewhere, mainly in Office 2010 applications:
  www.markfinzel.com/temp/Random-Box.png

  I'm sorry, but I don't think that your seeing. I know that the menu "file" is orange, which is expected. But if you look closely, there is an orange square EXTRA outside the orange file menu. That was never there before.

  See this screenshot, the link you sent and my screenshot screen-by-side (the one on the left is from the link you sent, the right one is my computer):

  http://www.markfinzel.com/temp/sample2.PNG

  This screenshot, I blew it up bigger so you can see more easily:

  http://www.markfinzel.com/temp/sample3.PNG

  You know if you put them on the Internet, you can link to them here directly.  ;-)

  Comparison of left & right:
  

  

  I don't see that now.  If you can take a screenshot - this is really.  It is not an illusion of your monitor, or some blur caused by your video card.

  Is also present in other Office applications?  Word (except the blue color) and Excel (except Green) and PowerPoint (except the red color)?  Or is it always orange?  And what other programs appear in?

  If it is a fault of the driver - what could be - you need to get with nVidia.  Their product, their software.  I don't see on my Windows 7 or Windows 8 machines.  If restore you the driver, do they disappear?

• The Blu - ray disc reader driver update

  I get Tempro-messages that I should update my driver disc Blue-ray (bluraydp-20130117155646) drive.

  I tried to install it several times but each time I get this error message:

  "Patch Project - Install Shield Wizard:

  Build version of the source is not build target.

  What can I do?

  Please continue the discussion on http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=286803
  There is no reason to start two identical threads.

• The satellite L655-1john ATI driver update

  I can install the most recent driver is 2011 on the toshiba site! I tried the site AMD and says that it is not supported! Found a similar thread, mentioned a solution but I would like to know steps to do! Toshiba also plans to release an update by themselves?

  > Also Toshiba plans to release an update by themselves?
  This is a user forum and that is why these questions are wrong here because nobody knows who

  >! I tried the site AMD and says that it is not supported! Found a similar thread, mentioned a solution but I would like to know steps to do!

  I assume you mean on installation using the advanced through the Device Manager.
  It's easy.

  You must download the driver files that you want to use/install. Unzip the file somewhere on the desktop.
  Then go to Device Manager, choose graphics card, click Refresh, and then choose option 2 that allows you to search the drivers stored on the HARD drive.

  Now, you will get an option to point to the folder of the driver. You must point to the folder of the driver that you have unpacked above.

  All that s

• White screen after the Satellite Pro P200 display driver update

  I installed the latest display driver ATI Mobility Radeon HD2600 (8.432, on the site of Toshiba through Tempo) on my Satellite Pro P200 yesterday. Reboot, everything seems good as much as the screen "Please wait...". "Windows Vista professional, but instead of showing the page of connection I get an empty screen (with a mouse cursor that moves around as usual). All I can do at this point is to be able to, and I'm running out of ideas on how to move forward.

  Things I've tried:
  # start in safe mode, the video resolution or last known good configuration, result the same screen empty.
  # connect to the system using remote desktop (to disable the driver) is not possible because the system has not yet loaded the network drivers.
  # I can't go back to a restore point because Vista can't find (I did a manual after you install updates windows over a couple of days).
  I can run a system command line options of recovery and prefer to use it to disable the driver + if + I knew how before the use of the more radical options.

  A search on the web (http://www.google.co.uk/search?q=ati+catalyst+vista+blank+screen&hl=en&sa= N) reveals that this has happened on a wide range of laptops with
  previous versions of the driver, but none of the links I've looked at to give a solution which does not exist for me.

  I agree with Hairyfool, you who should solve problems using an external display. If no image appears, then something with the material might be.

  Please give some information about your situation...

  See you soon

• The display for Satellite A300 driver update

  Hi Forum,
  I need an updated driver for my ati mobility radeon hd3650.
  Can anywhere help me find it?

  Thank you and best regards

  Cerade

  I put t know which operating system you use, but the drivers for supported operating systems you can find on Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Duplex option is no longer available after the Mac 10.8.3 driver update

  After an automatic update of the software which included an update of the HP printer driver, the print duplex option is no longer available (i.e. it is grayed) when you print my Officejet Pro K550.  This has happened on a BONE earlier too, wher ethe duplex option disappeared after an update of the driver.  The option was agin available when I went up to 10.8 but the new update he removed again.  Any advice would be appreciated.

  Hello

  Let us ensure that the duplexer is always enabled in the driver.  If you can open Sys Prefs, go to print, Scan, double-click the printer in the left window, click Ontario right driver tab and make sure that the check mark is in the option HP two-sided printing Acessory.