The OID LDAP synchronization

Similar Questions

• Problem with the sync Ldap IOM in R2 PS2

  Hello

  We have set up between IOM and the OID LDAP synchronization. His works very well to create the user.

  I have configured the rule:

  < rule >

  < expression > = country IN < / expression >

  < container > cn = OU1, dc = xyz, dc = com < / container >

  < description / >

  < / rule >

  < rule >

  < expression > Country = en < / expression >

  < container > cn = or2, dc = xyz, dc = com < / container >

  < description / >

  < / rule >

  For create operation user, the user get born in their respective OUS defined in LDAPContainerRules.xml.

  But if I change the user IN U.S. country, user input is not get migrated to the new ORGANIZATIONAL unit.

  Can anyone suggest if using LDAP sync its possible?

  Thank you

  Thank you

  He worked after setting LDAPEvaluateContainerRulesForModify & referential integrity TRUE property.

• Doubt about the LDAP synchronization

  Hi all
  
  I have sync LDAP enabled on my server of IOM. I also installed OID connector. I installed it since I want a user to be able to see DIO user resource in service to him in the "resources" tab. Now, whenever I create a new user, the user is created successfully. Now I have an access policy that grants the user the user OID resource based on its role. Now, once the user is created, I see in the OID I use. Of course, it is placed in service in the cn = default user directory but I read here that it is configurable from the LDAP container rules xml file. Now this provisioning in OID arrives with LDAP synchronization, and so I do not see any resource under the tab "resources". Then I grants it the user the OID resource by attaching the role to him and now he gets put in service to the OID as well. Now I see that based on the pre fill out cards that I put in place, this user gets provisioned to the correct container in the OID. But the question is now I find myself with two users with the same name and details in the directory of the OID. I don't want that to happen. Is there some way I can cut the somehow OID LDAP synchronization over the create user operation? Commissioning product only when I apply the role and therefore in the correct container?
  
  Thank you
  $id

  This is where, with a solid knowledge of the IOM is required. Should be re-evaluated the connector. For example, if the user exists, you know that you can not use the default create the task from the user. You will need to put just a spot of AutoComplete, since you know that each user will exist. You must also remove all your form variables that are managed from the user profile of the IOM.

  I suggest the following:

  Change your form to include only the user ID, the common name and the OrclGUID and name of the organization. You can use a pre-fill adapter on all those who will come from the user profile, because they already exist. If you need to move them to a different OU, after execution of the AutoComplete that defines the status of provisioned, you could start an update task the organization name field, which then the user to the appropriate ORGANIZATIONAL unit.

  You really need to think about all the tasks, and what is involved and change the connector. When you implement two methods that accomplish the same thing, you need to remove a few pieces of one of them. If you need to look at all of the tasks that will be required and the actions which are carried out. Some of them will have to be autocomplété so you can always view the status of correct resource.

  -Kevin

• the weblogic 10.3 OID/ldap error

  Hello:
  
  We are migrating our application of OC4J to weblogic 10.3. The application has some problem to access the OID/LDAP. Here is the error when the application attempts to connect to LDAP:
  
  Exception in thread "Thread-13" java.lang.ArrayIndexOutOfBoundsException: 10
  to weblogic.rjvm.RJVMFinder. < init > (RJVMFinder.java:98)
  at weblogic.rjvm.ServerURL.getFinder(ServerURL.java:181)
  at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
  to weblogic.jndi.WLInitialContextFactoryDelegate$ 1.run(WLInitialContextFactoryDelegate.java:344)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at weblogic.security.service.SecurityManager.runAs (unknown Source)
  at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:339)
  at weblogic.jndi.Environment.getContext(Environment.java:315)
  at weblogic.jndi.Environment.getContext(Environment.java:285)
  at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
  at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
  at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
  at javax.naming.InitialContext.init(InitialContext.java:223)
  to javax.naming.ldap.InitialLdapContext. < init > (InitialLdapContext.java:134)
  at oracle.ldap.util.jndi.ConnectionThread.run(ConnectionThread.java:61)
  log4j:error no file or output stream is defined for the appender named "null".
  
  
  Us did not change any code and everything works find on our OC4J application server. It stops working on weblogic 10.3. Does anyone have a similar experience?
  
  Thank you
  
  Jack

  Hello

  It seems that the ConnectionUtil class is not supported with WLS. I managed to do work by creating the initial Ldap context manually:

  replace

  InitialLdapConetxt ldapCtx = ConnectionUtil.getDefaultDirCtx(ldapServerName, ldapServerPort, ldapUserDN, ldapUserPass);
  RootOracleContext roc = new RootOracleContext(ldapCtx);
  

  by

  Hashtable env = new Hashtable();
  env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
  env.put(Context.SECURITY_AUTHENTICATION, "simple");
  env.put(Context.SECURITY_PRINCIPAL, ldapUserDN);
  env.put(Context.SECURITY_CREDENTIALS, ldapUserPass);
  env.put(Context.PROVIDER_URL, "ldap://" + ldapServerName+ ":" + ldapServerPort + "/");
  env.put(Context.REFERRAL, "follow");
  
  InitialLdapConetxt ldapCtx = new InitialLdapContext(env, null);
  RootOracleContext roc = new RootOracleContext(ldapCtx);
  

  I hope this helps.

  Kind regards
  Friedrich

• Activate the LDAP SYNCHRONIZATION in IOM 12.1.2.2

  Activate the LDAP SYNCHRONIZATION in IOM.

  Guys, I need help to synchronize ldap for IOM.
  IOM 11.1.2.2
  OID 11.1.1.7

  TPM is not installed where you need adapters?
  I saw all the oracle training documents and they said 'we don't cover ldap Sync in this course.

  I need steps to perform ldap synchronization before the reconciliation... Help, please

  Follow this: https://oracleidm11g.wordpress.com/2014/02/19/80/

  The configuration steps additional pre is IOM + OAM for integration with ldapsync.

• Enabling LDAP synchronization after configuration of the IOM in R2

  Friends,
  
  Did anyone tried enabling the LDAP synchronization after configuration of the IOM in R2?
  
  I'm doing the steps the below url.
  
  http://docs.Oracle.com/CD/E27559_01/integration.1112/e27123/oid_oim.htm#IDMIG4357
  
  But I'm not finding below.
  
  / db/LDAPUser
  / db/LDAPRole
  / db/LDAPRoleHierarchy
  / db/LDAPRoleMembership
  / DB/RA_LDAPROLE. XML
  / DB/RA_LDAPROLEHIERARCHY. XML
  / DB/RA_LDAPROLEMEMBERSHIP. XML
  / DB/RA_LDAPUSER. XML
  / DB/RA_MLS_LDAPROLE. XML
  / DB/RA_MLS_LDAPUSER. XML
  
  Few of them exist in/metadata/iam-features-ldap-sync, but not all. I'm not find LDAPContrainerRules.xml anywhere at all.
  
  I do something wrong or this documentation is wrong.
  
  Please suggest.

  Another post, try the following
  I do not have the tiried yet, it seems ok. After your results/experiences, must also try.

  Find the detailed steps in the link below
  http://docs.Oracle.com/CD/E27559_01/install.1112/e27301/OIM.htm#CDDGJIBJ
  http://docs.Oracle.com/CD/E14571_01/install.1111/e12002/oidonly014.htm

• How to create a role in IOM so that he doesn't end up in the OID?

  Hello

  Is there a way to create a role that does not end in OID?

  I tried with the category of the roles of the IOM and the default category.  They all end up in OID.

  I just have to use the role aimed access to AD policy and do not want these roles being in the OID.  Is there a way to do this?

  I'm on 11 GR 2, PB07.

  Thank you

  Khanh

  I think that LDAP synchronization gives no option for the selective provision of (means we cannot define some roles to be synchronized and others do not). Here, I assume you have LDAP Synch enabled in IOM.

  For more details, consult this oracle support note: 1585915.1

  Thank you

  Pallavi Chaudhari

• The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  I use sync DIP at the end of migration of data from OID for target OUD. Everything seems great so far, I have found that pwdhistory being migrated is not being validated by OUD password policy

  I do import ldif for OUD and find this pwdhistory field is populated with the same OID value. When I reset password in OUD-DOHAD with the word in the history of password,.

  Expected Behavior: Error Message from the OUD "" LDAP: error code 20 - already the value of specified password exists in the user input " "

  Course Behavior: OUD is what allows to reset the password in the password history

  Also found that when I try again with the same password, then it throws the error 20 code. OUD replaces the old values in pwdhistory after the password resets and written new values with stamp of password.

  It is a Blocker for us for migration in the history of password, I would like to join the forum and check if someone had the same problem and how they managed it?

  Thank you

  Satya

  Support of Oracle confirmed that DIO history for the OUD password migration is not supported. The OID and OUD records and validates the pwdhistory differently

• OMSS and OID LDAP integration

  I am to evaluate the integration of the OMSS for my business.

  In our scenario, the LDAP protocol is OID: according to the installation guide OMSS can be integrated with databases, Microsoft AD, OUD or OAM. What the OID?

  Thank you

  Luca

  Yes - OID is supported Oracle Mobile Security suite which Frédéric Desbiens-Oracle is different from OAMMS!

  See - http://www.oracle.com/technetwork/middleware/id-mgmt/omss-technical-wp-2104766.pdf?ssSourceSiteId=ocomen (check text above Figure 5)

  Oracle Directory Services for direct access to mobile applications for users based on LDAP directories

  for example, Oracle Internet Directory (OID) or unified Oracle Directory (OUD)

  Nassima

  Sudipto Desmukh blog: Oracle Mobile Security Suite (OMSS)

• Create user IOM - LDAP synchronization error

  Hello world
  
  When I try to create a user of IOM on create screen of the user, an error occurs.
  
  Error:
  IAM-2050243: process of Orchestration with the id 296394, failed with error 3010201-IAM: LDAP create event failed: failed to get LDAP connection and the root cause is - cannot create the connection
  
  I guess that this error associated with the LDAP synchronization. But I do not want to synchronize any LDAP server. I want to create this user in a single database of IOM.
  
  How can I solve this problem?
  How can I cancel the LDAP synchronization?
  
  Thank you.
  Best regards.

  Visit this link to disable the LDAP synchronization.

  http://docs.Oracle.com/CD/E27559_01/integration.1112/e27123/oid_oim.htm#CHDDJAJA

• Error of the OID IOM Recon

  Hi all
  
  On a new installation of development of COLD, and IOM, I get the following error when trying to perform reconciliations of the user:
  
  LDAP: error 53 - search filter attribute modifytimestamp unimplemented function code is not indexed/cataloged
  
  How can I add the index appropriate to carry out these tasks?
  
  PS: I'm a newbie, so please explain in detail. Thanks in advance.

  You must attribute modifyTimeStamp OID index to make it searchable. After a command, you can use to index the same:
  Catalogue - connect - Add TRUE - modifytimestamp attribute

  Kind regards
  GP

• How oracle created by identification of the users and groups in the OID.

  Anyone know what LDAP search filters would give me only the OID users and groups created by the Oracle installation process itself?
  I want to write scripts to retrieve all users and groups that the developers have put in manually, as opposed to those created with installation or synchronized from the announcement.
  
  I tried things like ' (& (!)). (objectClass = orcladuser))) (& (objectclass = orcluserv2)(orclisenabled=ENABLED))) ' for users, but it's not quite restrictive. "
  
  Other ideas would be appreciated.
  
  Thank you!
  
  Published by: sherlihy on April 5, 2011 15:45

  There should be a date of creation. You could do a larger than the piece of timestamp in your query.

  -Kevin

• OID / AD synchronization does not work

  I am new to Oracle Fusion Middleware. I am facing a problem where synchronization between OID/AD does not work. I'm learning this process on my own. Can you please guide me on how to solve this problem. If you can direct me to a documentation of troubleshooting would be great as well. Thank you!
  
  Oracle Enterprise Manager 11g > Fusion Middleware control
  Farm Farm_IDMDomain
  
  Status of deployments and Fusion Middleware is 100%
  
  Identities and access > DIP (11.1.1.2.0)
  
  SOAK the component status
  Quartz Scheduler until
  MBeans Up
  
  Under execution summary > synchronization profiles
  
  Profile Name successful changes didn't change error
  
  Site_Import 0 0 error ModRDN run in directory
  Error Corporate_Import 0 2000 entry in the directory

  user6655099,

  I don't know if OIDDAS exists or he works at OID11g. I used only 11g OID and have never used OIDDAS (so far). To access the data, I use ODSSM and the only authorized connection at the moment of this component is "cn = orcladmin. This is a limitation of product as directed by oracle 11 g OID at the moment.

  You can test your identification of the oid information using a simple ldapbind. Also, sign up for one of the databases with the OID and create an account of EUS database to test also.

  Although you have progressed to this stage. You're still meets tons other issues :-). But, it's the pleasure of working with these products.

  Kind regards

  Shaji.

• Cloning of the OID connector

  Hello
  
  I am facing a problem of cloning OID connector. I describe in detail.
  What I expect: I want to use a connector available user CN = container users OID OID. "And the second connector (duplicated) available to a different node in OID).
  
  When I clone OID connector using oimOIDUser.xml, there are two options:
  
  1. I have replace after the entry of this file xml to my changed name because these are the things that are needed for a new connector if we just need a new connector from commissioning to cn = users of any other system of target (that we define our default container in Lookup.OID.Configuration):
  
  Name previous name of the object changed name
  COMPUTING resources Type OID Server IRS definition
  TI OID resource resource IRS
  Object OID user IRS resources
  OID, IRS group
  OID organization IRS organization unit
  OID, role of IRS
  Process forms (all attributes matching so) UD_OID_USR UD_IRS_USR
  UD_OID_ROLE OUD_ IRS _ROLE
  UD_OID_GR OUD_ IRS _GR
  UD_OID_GRP OUD_ IRS _GRP
  UD_OID_RL OUD_ IRS _RL
  UD_OID_OU OUD_ IRS _WHERE
  
  And when I try to start up using this connector IRS user, user's get placed in service at cn = Users in OID successfully.
  But I want available to the user from: testId = Apple1, or = Apple, or is APPLICATIONS USER, UO is OBJECTS of CONTEXT USER, dc = espappledev, dc = appledev, dc = Applecompany, dc = com, dc = nz
  
  So for this I tried to change:
  Lookup.OID.Configuration as Lookup.IRS.Configuration is not found, changing the value of KeyCode: ldapUserID & ldapUserDNPrefix to testId, ldapUserObjectClass top of page | Nobody | organizationalPerson. inetOrgPerson. orclUser | orclUserV2 | ObjAliasUser (my custom class with four required attributes: businessCategory, GlobalUid, testId and RoleId), default container cn = users in OU = Apple
  
  where under the specified name ou = APPLICATIONS USER, OU = OBJECTS of CONTEXT USER, dc = espappledev, dc = appledev, dc = Applecompany, dc = com, dc = nz in Root DN of IT Resource.
  
  User now not get configured in the OID and IRS thrown exception of naming users. I checked the DN of the root and it seems good. I think that Lookup.IRS.Configuration is not be created so that the cloning, so IRS user connector uses Lookup.OID.Configuration and when I make changes, provisoining user survey error.
  
  I tried cloning connector again, this time create Lookup.IRS.Configuration in addition to the items mentioned in the table above. Updated the Lookup.IRS.Configuration with my values. But it is still in error. Failed to create.
  
  2. the second option is totally replace the OID with TID (my name of connector) in all instances except where OID classes are mentioned as I have to use OIDProv.jar and OIDRecon.jar. This Provisioning business to the same cn = users throws exception:
  
  GetTargetAttributeMapping running
  GetProcessData running
  SHOULDUSEXLORG running
  Target class = java.lang.Boolean
  SHOULDUSESSL running
  Target class = java.lang.Boolean
  CREATEUSER running
  Target class = com.thortech.xl.integration.OID.tcUtilOIDUserOperations
  ERROR, June 23, 2010 11:15:35, 947, [XELLERATE. API], class/method: tcLookupOperationsBean/getLookupValuesFilteredData a few problems: the LookupCode 'null' does not exist.
  ERROR, June 23, 2010 11:15:35, 947, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 947, [XL_INTG. OID], Exception in OID:tcUtilAttributeNameMap:getIntegrationAttributes (null)
  ERROR, June 23, 2010 11:15:35, 947, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 948, [XELLERATE. API], class/method: tcLookupOperationsBean/getLookupValuesFilteredData a few problems: the LookupCode 'null' does not exist.
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID], com.thortech.XL.Integration.OID.util.tcUtilLDAPOperations: hashTableEnv(): null
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID,] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) generic Exception Exception:
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],
  ERROR, June 23, 2010 11:15:35, 948, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID], com.thortech.XL.Integration.OID.util.tcUtilLDAPOperations: disconnectFromLDAP(): cannot close the LDAP context. The context has been created probably not, since it is null
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID,] ERROR in com.thortech.xl.integration.OID.tcUtilOIDUserOperations:createUser(S,S,S,S,S) NoInitialContextExceptionError when connecting to the target
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID], com.thortech.XL.Integration.OID.util.tcUtilLDAPOperations: cannot close the LDAP context. The context has been created probably not, since it is null
  ERROR, June 23, 2010 11:15:35, 949, [XL_INTG. OID],====================================================
  
  
  Ahh... too long, can you please help to solve this. Thank you.
  Nitin
  
  Published by: Nitin@S on June 23, 2010 12:49

  what I wanted was you have same context root for both the procurement process or dc = espappledev, dc = appledev, dc = Applecompany, dc = com, dc is nz

  For the first, you can specify cn = users (or nothing since cn = users is the default) in the pDataOrg in the process definition and
  for the second, you can specify UO = Apple, or = APPLICATIONS USER, or = OBJECTS of USER CONTEXT in the pDataOrg in the process definition.

  In this way, you are able to users in different containers of the same resource.

  Hope this helps,
  Sagar

• How can I get rid of the parameter/folder synchronization and storage

  In our account settings, we have a parameter/folder synchronization & storage how do I get rid of it

  Why? This isn't a folder that you store emails in, its part of an IMAP accounts Setup.
  In IMAP e-mails are kept on the server and synchronization MUST intervene to allow you to delete, move, etc to have your file server and your T-bird records show the same mails.