The open end of the loop to stop file

Similar Questions

• PC counters each attempt to fix/repair and finally, the loop to stop/restart windows Explorer.

  So beyond, I'm done with this laptop. He started by run me windows update and the awakening of a BSOD. Now browse those tedious threads, I know that the next thing people want are the dumpfiles. Well, you cannot make them because it won't create dumpfiles. I checked everywhere for them and double-checked to make sure that when I got bsod it is correctly configured to do. It will not create them. So ok, the next thing people say is running scandisk Sfc. Nope, BSOD in the course. Chkdsk? Nope, BSOD. during the. This laptop has a coherent dpc latency problem where every 10-13 seconds it stings really high, distorting the audio. I tried to disable drivers, update drivers, pulling on the battery, and it won't go away. To * with it I say, I can deal with that, besides there is probably a hardware problem, it's an old inspiron 5040. The greatest success in fixing something comes sfc running in safe mode with cmd prompt. He got to 100% and has absolutely nothing more. All this stems from the windows updates failed. But this latest issue is the water drop. Before the windows explore stopped working/restart loop, which prevents me from running damn near all executable on ANY startup mode, I was getting semi-fonctionnalites off safe mode with network. I was inside my damndest to try to solve the problems without paying a penny for the repair (because it's my operating system from windows to the 3rd address I got incredibly frustrated with questions and I'm NOT GOING to sink more money into the purchase/solve this *) but after a month of countless BSOD and failed system restore (BSOD on those too) I decided to say the * with it , it can still be used for browsing with chrome at least, since I found a way to activate the sounds of the internet registry. I had used it for about a month and realized that internet Explorer was causing in fact a kind of conflicts, because all applications requiring an i.e worked incorrectly, display of white windows resources that need to be pulled with knowledge then I tried to reinstall that is and makes the mistake of restarting, forget the automatic Windows Update. Well, I is none of that with this time and tried to turn off the pc before it started with nothing else than a glorified blue screening method. To restart, I got "windows is the restoration of changes", another reboot, then a "Welcome" I get started in the regular office, (not safe mode or anything like that) and he gives me a small white window with "custom settings" on it and literally nothing else. No toolbar, no desktop shortcuts. Wait a few seconds and I get "Windows Explorer has stopped working" and the option to close the window. safemodes boot loop to stop/restart windows Explorer and I can't do anything appear the Task Manager which is pretty useless, because I can't really do anything here except close programs that are not accessible in the first place. Safe mode only I can enter is the one with the command prompt. I don't really know what else to do. Quite happy to take a hammer and break the laptop for parts. There are so many problems with this thing, I doubt that someone will be able to help in any way especially withouth minidumps the BSOD. But if there is something simple that I'm missing for at least the minimum functionality that I was getting out of it until windows update in ruins me, feel free to try to solve the problems. The code the most common bsod I get is 0xf4. I put my money on half of the problem with the hard drive itself and the rest of the question was any other defective hardware. But ill be doomed if I buy another harddrive just to have more questions.

  Hello

  Generally, this problem is caused due to hardware or software related issues. As you mentioned that you have completed the restoration of the system and sets the Explorer loo, I would like to know if the problem is resolved or not.

  Regarding performance related questions, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the procedure described in the following Microsoft Help article and check if that helps. This Microsoft Help article consists of the steps to optimize Windows to improve performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Method 2:

  Put the computer to boot and check if the problem persists. This troubleshooting will help you find what third-party program or the app is the cause of this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• Start the loop to stop

  I do apply to some light flashing led. I use a while different synchronization loop flashing led (each led a different flashing time) and Boolean buttons with their local variables to activate the leds to another loop. But I would use the Boolean variable instead of buttons. How can I do this

  
  

• Judgment of multiple while loop running at different rates to stop using the single Boolean stop button

  Hello

  I'm on the block diagram of 4 loops, do different tasks. They are independent of each other, but need to see the unique front panel - some of the wonders of labview!

  Now, I want to have a unique stop button which will in fact be a back button to return to the main screen by stopping all four loops on the block diagram. I used the stop button (switch released) with local variable to stop the three other loops. He stops the vi but it is not a good stop vi to stop properly and the grid on the performance of the front panel. Now all loops run also at different rates, so it is not necessary that all loops are stopped immediately when one of the loop is stopped. Can't really think of a better way. All the ideas!

  Kind regards

  Austin

  Variables local is ok in this case, but you will need to keep the control in switching mode (no lock).

  A better solution would be to have all the loops as a structure of event all listening value stop change. Or have the Stop value change event generate a user defined output event or similar.

  /Y

• conditional of the loop will not control read in a business event

  I made a simple conditional to the loop, with a timer and a generator of random numbers in the loop as a stop button attached to the conditional stop Terminal.  Everything works well and stop the loop when I click on the stop button. But I then wrap the conditional for the loop with a structure event and create an event to run the conditional for the loop.

  To my surprise, when I run this updated VI I can never get the loop to stop via the wired button until the conditional terminal stop.  How is what happens? And how to do this?

  change the case of the event > UNCHECK block façade up to the case of finishes (or whatever this text indicates actually in the lower left corner of the pop - up of the event edit)

  (~ ~ ~ oh-Magic 8-ball ~ ~ ~)

• How to stop a beep when the loop ends

  Hello

  I have a beep occurs inside a loop (which contains waves of data acquisition) to a certain threshold. I want the sound system for not introducing any delay in the execution of the loop.

  But I also have another beep when the loop ends. How to eliminate this noise?

  Your comments will be greatly appreciated. Thank you

  PI

  The obvious answer would be: remove the beep VI this is probably. Please show us your code.

• Stop the loops with a button

  I have an infinite loop is and display of data. How can I end the loop with a button or a keypress?

  Periodically perform a ProcessSystemEvents() call inside the loop. In a reminder of the STOP button, set a flag to indicate your loop to stop.

  stop unsigned int = 0;

  While (! stop) {}

  data getmeasured

  display the data

  ProcessSytemEvents()

  Sleep (250);   to be polite: it is impolite to spinlock, since you will monopolize the CPU and other threads can get hungry

  }

  then, in the reminder for a STOP button

  STOP the button callback routine

  stop = 1;

• Programming of a conditional FOR the timing of the STOP button on the loops

  I have a conditional FOR loop with a STOP button, however, the nature of LabVIEW data flow, the stop button is now being questioned at some point before the end of the loop. A control not having no entry, I can't connect to the last operation of a single iteration of the loop to trigger the vote on the STOP command, and I prefer not to use a flat sequence just for the power button if I can avoid it. I've considered using a structure of the event, but I don't want to force the loop to wait that the stop button to be pressed, I want just the loop to EXIT, * IF * the stop button is pressed... but I want the stop button to be questioned at the end of the loop, so if the user presses the button stop at any time in the loop , at the end of the iteration, the loop will end... that makes sense? At present, given that the stop button is called once at some arbitrary during the iteration of the loop time, if the user presses the stop button after he is questioned, the loop must run an extra iteration, and I don't want that to happen.

  ... in any case, I guess I'm looking for a more elegant way to implement that having to use a flat sequence just for the stop button.

  Sorry, but you'll have to use a sequence structure.  This is why they are there.  Sometimes they have their purposes.  Here is how I would handle it.

  

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• stop the loop inside while loop

  Hi all

  Is there a way to stop a loop within a while loop? Error-free program will stop running when you press the stop button, but I want to while loop continues to run in and only for the loop stops when the condition is met.

  Thank you!

  Hi TayAus 1.

  If you want to run the execution once? Maybe something like below? The code inside the structure of events can only run when the event source is triggered. For example, the code in the digital works only when it detects a change in the numerical value (just an example).

  

  When the button is selected, it should raise the event to stop as shown below:

  

  If you want to create the event source, create the structure of the event > right-click on the frame and select edit events dealing with this... > This should open Edit events.

  The example below is that I put the event source for the change in the value of x and x 2.

  

  So when x or x 2 value is changed, executes the code in the sous-schema event shown below.

  

  Warm greetings,

  Lennard.C

• Update Windows stuck in a loop. Keeps trying to download page 3 of 3, but never does, then restarts and is trying to download. Can't seem to put an end to the loop.

  Update Windows stuck in a loop. Keeps trying to download page 3 of 3, but never does, then restarts and is trying to download. Can't stop the loop to try something else.

  The operating system is Windows Vista.

  I found this as a solution and to share it here, I still have questions, but thinking might help someone.

  Windows Vista and 7 update Reboot Loop Fix

  Symptom: You have a update that is causing Windows Vista or Windows 7, stuck in an infinite loop. The problem usually manifests as a "step 3 of 3:0 % complete...". "followed by a restart which starts at the exact same message, not allowing you to get on your account of connection or a desktop at all. It's a pain, and he doesn't stop, even in Mode without failure or advanced trying last good known Configuration in the start menu.

  Here is the short version for people who know how to get to tools to do this and if run System Restore from the installation DVD does not work: DELETE files

  \Windows\WinSxS\cleanup.XML AND (as applicable)
  

  \Windows\WinSxS\pending.XML and the infinite loop update will be set.

  There are two ways to get the files, you need to delete. The easiest is to start your installation of Windows and the button 'Install now' DVD, click on the link located at the bottom left that says 'Repair your computer' open a command prompt and type:

  del C:\Windows\WinSxS\cleanup.xml

  del C:\Windows\WinSxS\pending.xml

  The other way is to download a live Linux distribution such as the System of Tritech Service (which, unlike Vista or 7 DVD, can be booted from a USB flash drive for computers with no CD/DVD drive such as netbooks), open a command prompt, mount the file system and deleting the files. Assuming that your Windows installation is the first partition on the first hard disk, the following commands in rxvt or a console in the Tritech Service system should work:

  Mount.NTFS - 3 g/dev/sda1/mnt/sda1

  RM /mnt/sda1/Windows/*/cleanup.xml /mnt/sda1/Windows/*/pending.xml

  umount/mnt/sda1

  discount to zero f

  Anyway you do it, this solution will stop the engine update loop reboot and let you return to your computer. You may need to make some corrections, additional or manual updates if you have problems, but unless your login screen and/or the Office should be accessible! Is a very annoying problem and I noticed that Google is looking for things like "stage of vista 3 3 restart" usually only provides information about how to run the system on a Vista DVD restore. Unfortunately, if there is a problem with an update, sometimes the system restore does not work and fail with obscure errors, so this info is vital.

  Maybe it's your last chance to avoid giving to the top and reinstalling Windows, and we always like avoiding relocations!

• The loops at the beginning reading: how to stop?

  I work far in PP CS6 and a little thing has slowly turned into a major annoyance today:

  I am building my sequence one at a time and when I play back the last Cup to check, playback on the timeline it will sometimes make a loop to first shot of the show, so I have to stop reading and click 'Finish' to retrieve my indicator from current position to the end of the timeline where it should be. It is not all the time, just sometimes, and it's driving me batsh * t crazy.

  Has anyone else has seen this, and if so, please, for the love of all that is holy, tell me how do to stop this behavior.

  Chris Conlee

  Mac Pro (4.1)

  OS X 10.7.4

  24 GB RAM

  nVidia GTX 285 (CUDA 4.2.10)

  Two monitors

  Mini Matrox Max

  PP 6.0.1

  Chris,

  That's what happens with zero entry of you?

  The reason I ask this is that many users have tried to hit the SPACEBAR to stop playback, but is a little late, and then the space bar started playing 00; 00; 00; 00.

  Good luck

  Hunt

• I want to stop the loop button shape 10g

  I want to stop a loop in the forms of pushbutton 10g it's like (SwingWorker() in java) (DoEvent() in .net)
  The problem in forms 10g that when you start a loop shape freezes and you are unable to broadcast any button on the form, I found the solution for this in form 6i by package d2kwutil * WIN_API_UTILITY. InterruptCheck (hButton) *.
  But in 10g I can't find a solution, Please help > > > > >
  
  
  declare
  hButton PLS_INTEGER;
  Start
  : interruptcheck.counter: = 0;
  hButton: = get_item_property('INTERRUPTCHECK.) PB_OFF', WINDOW_HANDLE);
  go_item ('interruptcheck.loopcount');
  set_item_property('INTERRUPTCHECK.) PB_OFF', ENABLED, PROPERTY_TRUE);
  set_item_property('INTERRUPTCHECK.) PB', ENABLED, PROPERTY_FALSE);
  set_application_property (CURSOR_STYLE, 'HELP');
  set_application_property (CURSOR_STYLE, 'WAIT < d2kwut60 >');
  I'm in 1.:interruptcheck.loopcount LOOP
  If WIN_API_UTILITY. InterruptCheck (hButton) then
  "exit";
  end if;
  : interruptcheck.counter: = i;
  synchronize;
  end loop;
  set_item_property('INTERRUPTCHECK.) PB_OFF', ENABLED, PROPERTY_FALSE);
  set_item_property('INTERRUPTCHECK.) PB', ENABLED, PROPERTY_TRUE);
  
  set_application_property (CURSOR_STYLE, 'DEFAULT');
  end;
  
  Published by: wael amar on May 1st, 2010 23:03

  OK, here's a unit test to work.

  The idea is taken from an article in oracle magazine (I don't have at hand, she, so I tried to restore it and "memory".) I remember the original was German doag-magazine and was written by Gerd Volberg).

  How to make the loop:

  PROCEDURE PR_DO_THE_LOOP IS
    nNumberInOneStep NUMBER:=2;
    tm               TIMER;
  BEGIN
       DEFAULT_VALUE(0, 'GLOBAL.INDEX');
    IF :GLOBAL.INDEX=0 THEN
         -- Didn't run yet, determine the max count
         :GLOBAL.MAX:=10000;
    END IF;
    LOOP
         -- Do the looping stuff
  
         -- Decrease counter
         nNumberInOneStep:=nNumberInOneStep-1;
         -- Increase globale counter
         :GLOBAL.INDEX:=:GLOBAL.INDEX+1;
         -- Exit conditions
         EXIT WHEN nNumberInOneStep=0;
         EXIT WHEN TO_NUMBER(:GLOBAL.INDEX)>=TO_NUMBER(:GLOBAL.MAX);
    END LOOP;
  
    -- reset index at end
    IF TO_NUMBER(:GLOBAL.INDEX)>=TO_NUMBER(:GLOBAL.MAX) THEN
         :GLOBAL.INDEX:=0;
    ELSE
         -- start timer for next iteration
         tm:=CREATE_TIMER('TM', 10, NO_REPEAT);
    END IF;
  END;
  

  The WHEN-TIMER-EXPIRED-trigger

  IF :GLOBAL.INTERRUPTED='Y' THEN
       MESSAGE('Interrupted at index ' || :GLOBAL.INDEX);
  ELSE
       PR_DO_THE_LOOP;
  END IF;
  

  The WHEN-button-PRESS-trigger the button stop

  :GLOBAL.INTERRUPTED:='Y';
  

  The WHEN-button-PRESS-trigger on 'start' - button

  :GLOBAL.INTERRUPTED:='N';
  PR_DO_THE_LOOP;
  

• Thunderbird is stuck in the loop. Can not stop in the Task Manager.

  links will not open in thunderbird. I followed the instructions in this link: http://www.ghacks.net/2013/01/20/fix-for-thunderbird-not-opening-links/.
  After you set the 3 True values, I left and restarted thunderbird.
  I then clicked on a link in an e-mail message and the LAUNCH APPLICATION box appeared.
  I accidentally entered "thunderbird" instead of "firefox".
  When I clicked on the link in the e-mail, it goes into a loop where the hourglass icon will flash constantly.
  I couldn't go back to the LAUNCH APPLICATION window to change.
  Then, I deleted the Thunderbird folder in program files and reinstalled thunderbird OK.
  Everything works fine until I click on a link in a message. He then goes into the loop, and I have to restart.
  Is there something in the registry that I can change to fix this?
  Thanks for any help you can offer.
  Kind regards
  Geoff Wight

  Go to the menu Tools (alt + T) > options > attachments and delete any reference to Thunderbird.

  Change the preferences to their default values. by https://support.mozilla.org/en-US/kb/Hyperlinks-in-Messages-Not-Working#w_check-for-an-incorrect-preference then you can read any article that the incorrect pref is usually only a question after using the Thunderbrowse add-on.

• the new firefox open my home page in addition to the start page of firefox, everytime I open firefox. How can I stop this and make sure ONLY my home page shows?

  the new firefox open my home page in addition to the start page of firefox, everytime I open firefox. How can I stop this and make sure ONLY my home page shows?

  Delete the USER. JS file if there is (some plug-ins create in addition to prefs.js).