The 'Other' training event

Similar Questions

• We have two iPhones, two iPads, two MacBooks. On each calendar events are synchronized via iCloud, except the inscriptions on the iPhone 6 +. They don't publish to other devices if the phone receives entries from all of the other devices. Help?

  We have two iPhones, two iPads, two MacBooks. On all the calendar events synchronize correctly via iCloud except the inscriptions on the iPhone 6 +. They don't publish to other devices even if the phone receives entries from all of the other devices. All the settings on the iPhone 6 + match those on other devices. All iOS and OS 10 software is up-to-date. Anyone have any ideas on what could be the problem?

  Hi there, therex!

  It seems that you have done your inquiry very well and it seems you have reduced to the iPhone 6 Plus. But, since you need see events sent from the phone on all your devices, I'll be happy to help you.

  Archive or make Copies of your Calendar (s) -as you work with live data, be sure to not skip this step to protect the information already there.

  Get help using iCloud calendars - test all the steps, but it has been my experience that I forgot to put this particular calendar as my default calendar.

  Thank you for using communities of Apple Support and have a great day!

• I want to generate a pulse of a meter train and count the pulses with the other counter on a USB NI DAQmx 6259.

  
  

  Salvation;

  Here is the solution for your problem.

  The cause is that "Gen dig Pulse Train-Finite" uses Ctr0 both Ctr1.

  Please refer to:

  "When you do a finite pulse train generation, a counter generates pulse train, and the other counter generates an impulse that acts as a barrier to the first counter. If you change the pulse train to generate continuously or

  only generate a pulse, you can run two tasks of meter at the same time without error. »

  http://digital.NI.com/public.nsf/allkb/04BEDD9E9E91ED3486256D180048116D

  I used Ctr0 and Ctr2, jumping Ctr1 as it is reserved by "" Gen dig Pulse Train-Finite ". I works very well.

  Kizito.

• Pinting/sharing, error 2114. The printer cannot be used by others on the network. Event ID: 315

  In my event log, I get the message "the print spooler could not share printer HP Deskject F2200 series with the HP Deskjet F2200 shared resource name.

  series. Error 2114. The printer cannot be used by others on the network.  Event ID: 315. "I have only one printer, and I'm not on a network share.  I only turn

  It's on when I need to use it.  Why I get this error?  It would cause my computer to freeze?

  BJB

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-2114/b87aa4ed-b4fb-43E0-9080-e3a7d7ffeaa3

  It will be useful.

• How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

  How the other drive app option to calculate calories? I did 45 minutes yoga with him and he showed the 260 callus which is high of 45 mins of yoga session.

  ISuspect that is not correct.

  Hello

  Saving workouts through the app to drive using others as the type of activity, active calories are estimated at a rate equivalent to a brisk walk or based on the data recorded by the heart rate sensor, according to what is higher.

  The following steps can help to improve the accuracy of the estimates made by your watch:

  • Estimates for calories and other results depend, in part, your personal information. To verify that it is accurate:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > health > Edit (top-right).
  • While training, to optimize the performance of the heart rate sensor (data from which is used when estimating calories), make sure you wear your watch fits on top of your wrist. Apple suggests that consider you the clamping Strip before starting a workout and it loosen again thereafter.
    • Note that the heart rate sensor is likely to give better results for the workouts that involve rhythmic (such as running) rather than the irregular movements.
  • Calibrate your watch can improve the accuracy of various estimates related to the activity, including estimates of calorie. To calibrate your watch, follow the instructions in the link below support article. You can reset your calibration data and start the process:
    • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness > tap reset Calibration data.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• I can set the number of events in the calendar to display in the Page Notifications?

  I have many calendar events every day (15-25), but only the following event appears in my display of notifications.   Is it possible for me to set the number I see?  As perhaps the next 3 or 5?  And then they are updated as events will expire?  iPhone 6 s

  No, it isn't. There are other calendar applications, for example schedule 5 of Readdle, that display more complete information, but it does not include the events 'expired' or has a Setup for the number of events displayed in the Notifications. I don't know either, but you can always check the App store. But to be honest, I doubt you will find one that handles what you are looking for in the notifications. The sight of Notifications is not really designed for the complete management of the content of the app.

• Control does not after the exit of the loop of event handler

  My application brings together several controls user input.  When the user presses the OK button, it exits the event handler and the treatment.  During the treatment, it is not able to read the new values of the controls.  And in fact is no longer meets the stop button.

  When executing the attached VI, you will find that you can press the button of the switch and the LED indicates the status of the switch (this is my input from the user).  Now, press the OK button.  If you press the switch button, you will see that it works only once.  In addition, the stop button unresponsive to user input.  If you do not press the button, the stop button will cause the 2nd loop exit.

  Why the 2nd loop is unresponsive to the switch?

  It is a simplified version of my application in which two loops are separate from the States of my state machine.  There are several other States as well.

  The case of the event of the "change value" event has the property set to lock the Panel before the VI when the event is raised until the case of the event is over.

  Because the left while the loop is running not but the structuer event is always active FP everything is locked.

  Uncheck this option in the "edit event".

  Tone

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• Shared management of the Variable - spurious events events

  It is more of a nuisance than anything:

  Thanks to the module DSC to join with variable events shared, the structure of the event fires once for each variable recorded for always. For example, if I sign up for shared variables 'Var2', and 'Var1' entering into the structure of the event [in a loop], I'll immediately see two events [one for Var1] and the other for Var2 even if the values of Var1 and Var2 have not changed.

  Initially, I thought this is intentional - it seems impossible to use the events of the OAS without this "feature" - except that's not switch mode "highlight execution", which I find confusing.

  Why it exist, and is there a magical way to turn it off? Or is this a bug? Anyone ever used SV events no doubt has any means to deal with this. At the moment I just burn the first manifestations of N, where N is the number of shared variables, I am registered for. But who is unwanted additional schema and really, it should not be necessary.

  
  

• My doubt is if I press a button, it will redirect you to the other side...

  For a single application I need if I press a button, it will redirect you to the other side, how it is possible in LABVIEW

  Thank you.

  Place your Subvi inside your main diagram of vi.  Use a Structure of the event to capture the key event.

  more information here:

  http://forums.NI.com/T5/LabVIEW/how-to-open-a-subVI-on-a-click-of-a-button/TD-p/1082660

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• Windows Live Mail crashes on the update of the calendar of events

  Windows Live Mail broken

  When I hit update just as it hangs on the update of the calendar of events.

  Don't send mail in the Outbox.

  I'm on a live time alwaya DSL on connection.
  Incoming mail is not in.
  I have to click stop to do and download.

  How can I activate the update schedule.  I do not use this calendar.
  There is no items checked on the schedule up-to-date anywayy.

  Windows Live Mail is BROKEN!  like many other products Ms.

  Hello

  Post your request in the forums 'Windows Live events' and Toolbar for better assistance. Visit the following link to send your request: http://social.answers.microsoft.com/Forums/en-US/wlevents/threads

  All the best and hope the issue is resolved as soon as possible.

  Thank you, and in what concerns:
  Syed V - Microsoft Support

• The viewer error event

  Hello

  If this question was already posted please let me know.

  I have a worm WRT54GS router. 6. my PC is connected to the router. Whenever I start my computer, I see the following in Event Viewer:

  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x00271383D876 address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  I have access to the internet and my home network works, but I'm just curious to know if this error is anything.

  Am on Windows 7 Pro 64 bit. I just upgraded the firm dishes at 1.52.8

  Any other information that you may need to help me please do me know. Any info you can provide would be great.

  Thank you

  So sound on the motherboard, you can always install the driver.  Just disable IPv6 as it is no use as it right now.  You can always go back and turn it back on.

• Several errors blue screen (sequel to the other a similar tittled)

  Hello I seemed to have a problem in my PC desktop, Compaq Presario SR5275AP, OS: Windows Vista Home Basic, 1 GB RAM, 80 GB HDD, using Intel (r) 82945 G Express Chipset Family display adapter.

  This post is a continuation of the other similar tittled: SEVERAL ERRORS SCREEN BLUE, which was also released by me a few days ago Jiaxiong, after Auggy answer to my questions.

  Here is the description of my problem, once again, with more details:
  It all started on 2010-10-28 21:44, when my pc started having the video hardware error (i.e. screen freezes, erased and then had a message that appears in the taskbar, saying something like: "display driver stopped responding & recovered".). This happened all the way until the 28/01/2011 10:28, which was also the day when my pc shutted down unexpectedly... (may be caused the blocking or blue screen...). This means that so far, both the video hardware error & close unexpectedly arrived the same day & looked like at the time when two of them happened to be close between them. After that day, video material error is no longer, but all close unexpectedly (shown in my reports window & Solutions of the problem), which could also be both blue screens. But I wasn't very sure that if there are other hidden errors / crashes my pc was in the window reports & Solution of problem.

  Then I let my pc only (not turned it use for about 3 months) until June 2 so I have about it once again, no more blue screens has occurred. Then a few weeks as well as on this sea, 15/06/11, blue screens returned. I think that something is strange here...

  (From the previous post):
  I said that I already bought my pc to my shop pc reformat (can say is set) that is to erase all the data on my hard drive. But this same problem (BSOD) kept repeat again & again. I even scanned my pc with my up-to-date anti-virus software (I don't know how many times already) & nothing. (no viruses or other unwanted software found) What seemed so caused all these problems? Can it be caused by defective video material? or defective video card?

  (From the previous post: answers from Auggy):
  Auggy suggested I have minidump files in a compressed zip file & put it on Windows Live Skydrive or similar site so that he could look to see what might be causing these issues. But I can't seem to compress the minidump files. When I tried to do, I got an error message saying "compressed (zipped) folders error: file not found or no read permission.»

  Previous post: another response that is not reflected on my pg posted but on my email:
  Another person suggested that I looked in the event viewer to see if I can find something. But when I looked through it, I could not understand that we (i.e. not very safe either)... when I clicked on the more information on an event (go to the Microsoft website), it was found as not...

  So I knew that my video adapter/card may be defective because it doesn't seem to be a virus problem, after many of my pc scanning everything... but actually I wasn't very sure what had caused all these problems occur...

  If other suggestions to solve this problem?

  Yes, there is a good chance, the problem is the RAM.

  RAM can go wrong with time as the motherboard.

• When I opened e-mails. doc or pdf, this message appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  Original title: side-by-side configuration is incorrect

  When I opened, try opening some emails. doc or pdf, this msg appears: "the application failed to start because its side-by-side configuration is incorect. Check the log of events applications for more details. »

  I'm going to log events, but how to solve the problem by putting the RIGHT configuration to?

  Thanks in advance

  Hello

  1. when the question is is produced?

  2. you remember of any change to your computer before the problem?

  3. are you using a 32-bit operating system or a 64-bit?

  Please visit: What are the information in the event logs? (Event Viewer)

  In the meantime, follow these steps and check if they help.

  Step 1:

  I suggest you install the Visual C ++ 2005 Sp1 Runtime and check if the problem persists:

  Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=200b2fd9-AE1A-4a14-984d-389c36f85647&displaylang=en

  Step 2:

  If this does not resolve the issue, I would have you done SFC scan on your machine to check if the problem is related to missing or corrupted system files.
   
  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]