The pen tool Photoshop: spot-welding?

Similar Questions

• has the pen tool Photoshop cs5

  I have suffered with elements 7 what is the best product of photoshop

  to buy that contains the tool pen.

  I do not know if CS5 features of a specific pen tool.

  You can get excellent help on the link below.

  http://forums.Adobe.com/index.jspa?promoid=JOPCT

  I am a member of the Adobe forums and help has always been good.

  I have items 6 and 10, and there is a tool of the stylus pressure.

  Once the editor is open and the Brush tool is selected, click on the small arrow beside the brushmark.

  In the menu you will find the pen pressure.

  You can also click with the right button on the Brush tool and click on the pencil tool.

  You may know this, but if you do not I hope it helps.

  fyip

• Photoshop CS4: Using the pen tool to add corner rather than the curved anchor anchors

  Hello people, I tried everything I could think about using different sentences, but have yet to find a way to do it or if it was possible. I'm working on a project that requires the addition of many corner anchors to paths. By default, using the feather of Photoshop CS4 adds curve anchors. Therefore I have to add the anchor and then convert it into a corner. Is there an easy way to make the PS to create corners instead of curves with the pen tool? Even using combos Shift-Ctrl-alt-click did not help? Would save me time and mental health!

  Thank you all,

  -DK

  Try adding points with the normal pen, hold down the ALT key and clicking twice.

  -Christmas

• How can I change the color of the pen tool path in Photoshop cs5 to contrast with the images?

  I have an extreme amount of traces of clipping in Photoshop. I used the pen tool with a grey path dull to try to cut the images correctly. How can I change the color of the path to contrast with the picture so I can see the path is better? I currently have Adobe cs5 and cs4 versions of Photoshop allowed me if that helps...

  http://kb2.Adobe.com/CPS/870/cpsid_87084.html

• The pen tool is rasterized in Photoshop CS3

  I am trying to trace an image and create a vector image, but when I am using the pen tool it seems already to be rasterized. I don't know what I'm doing wrong. I tried to check some parameter, but I still don't know what to look for. Any help will be greatly appreciated. Thank you. Here is a screenshot of what I'm working with.

  

  There is nothing wrong with your... monitor. Do not attempt to adjust the image. We are against the transmission.

  Vector traces in Photoshop are invisible, what you see is a pixel layer filled with a color United and defined by a vector path. This has all the benefits of the use of vectors with the exception that when you zoom in, you'll see smooth edges. This is only a display problem that Photoshop can display only the pixels, but your path will be smooth no matter how large or small make you.

• Features of the line of my mouse and the pen tool are thicker than my tablet.

  Hello, I have just built a new computer and tried drawing in Photoshop but it turns out that my features of line of my mouse and the pen tool appear to be twice as thick as my Tablet features. I am currently using the Wacom Intuos small Pen & Touch tablet. I messed with the settings and put sensitivity to pressure for setting low to make sure that I get a fixed size for each shot, so it's probably a sensitivity problems. I don't have this problem with my last computer when I used the same Tablet and the program Photoshop I use now. Does anyone have suggestions about how can I fix? Thank you for your time.

  Occam's razor would tell us that it is almost certainly a problem with spring pressure.

  Or the other of the two first round brushes by selecting in the brush Panel must ensure pencil and mouse identical brush sizes.

  

  The other thing to look at is the options bar.  The other icon highlighted in red, is the pressure change opacity.

  

  You can use both at the same time.

  

• copy and mirror of the pen tool path

  I am currently using Photoshop CS6 and trying unsuccessfully to reflect the way I created with the pen tool.

  So far, I've been able to create the way I need and fill it, but the challenge is to select, copy, paste, and reverse the trend.   Can someone please help.

  Thank you.

  CTRL + C, Ctrl + V to copy and paste, then Ctrl + T to transform, then enter '-100% ' in the areas either width or height.

• Help please with the pen tool! :)

  I'm trying to draw a building with the pen tool.

  I want that every surface (form?) to a new layer, but I want to use the angle of the previous shape to start and complete the new form so that they are distinct, but join perfectly.

  I tried to use the transform tool to create forms I need and align them next to another form, but I don't know how

  to make 'snap' to the shape on the other layer.

  I use Photoshop CC.

  I was trying to search online, but finding this difficult issue of Word correctly in google to be honest.

  Thanks in advance! I hope this makes sense.

  Ted

  tedats wrote:

  I must say I want the forms remain separated.

  Yes, they would be all on separate layers.  You would use only part of the last shape to start the next to ensure perfect alignment.

  Illustrator is a nod to the Point.  It always annoyed me that Photoshop does not handle the snap with the pen or free transform tool.  :-(

• The pen tool is delayed

  The pen tool is delayed on wacom tablet - is it a fault with upgrade photoshop?

  https://forums.Adobe.com/search.jspa?place=%2Fplaces%2F1413024&sort=updatedDesc&q=Wacom+la g

• PC shortcuts for the pen tool

  Does anyone have a cheat sheet for shortcuts for the pen tool or any detailed instruction starting for PC on Photoshop users essential? I don't have a MAC thank you.

  The main keyboard shortcuts are:

  SHIFT + P to select the pen tool

  Click to create a path with straight lines between points (hold down the SHIFT key to perfectly horizontal or vertical lines) or click and drag for curves by using levers extended to your desired shape.

  Press the Alt key (cursor changes in > when you hover over a point) and you can re - position for example to move one end of a lever regardless of the other end.

  Press Ctrl Key and cursor changes to the white pointer - click anywhere on the path to highlight all points while the Ctrl Key is pressed again to choose a single point. You can then refine this single point, for example by using the arrow keys on the keyboard.

  This video tutorial provides more information:

  http://Bitcast-r.v1.sjc1.BitGravity.com/InfiniteSkills/iSkills-media/photoshopcs6-demo/120 2.mp4

• How do reset the pen tool or change it back to normal? (Adobe HAVE)

  Hello everyone. I'm having a problem with the tool pen in Adobe Illustrator, and I don't know exactly how to reset or make it work like the pen tool in Adobe Photoshop.

  As you can see below, when I'm trying to draw the shadows of the face, hair and shoulders, it somehow fills aexpectswitches andunwant ed... I just draw the points first anchor and then fill it with black color... Just likAdob ee Photoshop CS6, see second image.

  Any suggestions? I've used Photoshop since more than 4 years, and I'm not really expert on Adobe Illustrator.

  Thank you in advance!
  

  
  

  • Adob Illustrator e CC

  The problem below.
  

  

  
  

  • Adob e Photoshop CS6

  That's exactly how I want to do the job below.
  

  
  

  Simply apply the fill color 'None' for the path.

  See manual on how apply fills and strokes.

• Beginner with the pen tool problem: not obvious on any shape layer

  I'm learning the pen tool. I made a line with the pen tool, but now I can't find out what layer it is on, and I can't caress as I wanted. All my layers are turned off and the form appears. However the research through the layers there is no vector layer that contains my line. In addition, I can't touch the line as the line options and filling are greyed out on my table of paths. I have attached a copy of Θcran to explain if all goes well I mean. I use CS2 on Windows 7.

  

  Your Layer palette capture you have no visible layer and targeted in order to trace the path would not be available and gray by Photoshop.  Target a layer visible and you should be able to stroke the path on this layer. Also, you should be able to add a shape layer by using this path of pen.

• I use CS6 and when I use the pen tool, it removes the Interior isn't the external image of the image

  I've been using photoshop cs5 and cs6 for some time, but I've never encountered this problem. Whenever I use the pen tool to draw an object and I close the outline object, it deletes the object I have traced him and not the bottom. It's really annoying and I can't change it. I have spentt a good amount of time to try to change but I don't know how. Can someone please help I also watched online, but there is nothing to help.
  Thank you Alex

  Hello

  This is probably the path setting operations.

  The default setting in photoshop cs6 is to exclude the shapes that overlap, and you can also use forms combine.

  

• Cannot complete the trajectory of the pen tool! Help. He fills out the way. NOT inside. ):

  Then, when I do a toolpath pen, like a box or something with it. When I right click and press "Way of filling", it does NOT have inside the box, it fills all outside. And Ctrl + Shift + I didn't do nothing, which doesn't help if im making a selection. How can I reverse this problem of pen tool? I really need help with that some projects im working on force me to use the pen tool

  Ah, now we see the thumbnail of the path that the Act of creating the path must be there that the rub...  Note that with my example, the small part closed is white on a dark background, while yours is dark on a lighter background.

  Once you have the pen tool selected, small buttons at the top of the main window of Photoshop do you have supported on?

  I bet that you have pressed the subtraction of path button.

  Try pressing the button Add to the path instead.

  

  Edit: MTSTUNER beat me to it.

  -Christmas

• Select a path of the pen tool

  I created a path around an object using the pen tool, how can I move this object on a different background? Sorry, so new to this :/

  The best way to do this in photoshop is first make the background layer in photoshop in a real layer or a sas of transparent layer, sometimes called him.

  Do you this by clicking on the name of the background layer in Photoshop and then give a name or leave the name by default when the dialog box options layer appears.

  Then erase the or remove the background of the image in PS

  then save it as a .psd not flatten it.

  Then place this .psd document in your document of AI and the transparent background will be honored by the AI.