The Phillips 170 monitor power indicator b blinks constantly.

Similar Questions

• When I change the battery on a power outlet, Firefox is empty, I close firefox, the "do you want to close" box is empty, too.

  I can't change current alternative to battery without incident. When I change the battery on a power outlet, Firefox blinks several times then turns off. To close the browser, I click on the 'X', which fortunately remains, and that the box "you want to close" is empty also. I hit enter and Firefox closes. I reopen and select restore previous... and I can continue. Just something I've ever known, do not know how to fix it. Sometimes, if I reduce the browser (""-"") at the top right before plugging in my diet, I can work around this problem. Sometimes he waits until I have maximize the browser, and again, it flashes and turns off anyway.

  Hello numberonejason, this is perhaps a problem with hardware acceleration. try updating your graphic driver, or in the case where this does not resolve the problem, disable hardware acceleration in firefox > options > advanced > General.

• ThinkPad E550: External monitor blinks constantly during the recharge of portable

  When I'm running my Thinkpad E550 and I connect it to any external monitor with a VGA cable, the external monitor blinks constantly as the external monitor can be used to do any significant work.

  However, when I remove the charger, the constant flashing stops and the external display could be used if the screen still flickers / flashes for about 4 seconds every 50 minutes or more.

  Unfortunately, using the laptop on battery power all the time is not healthy for the battery of the laptop but it is the choice that I have if I need to use an external monitor.

  I tried to use an adapter 2 components for connect the monitors but I still feel the flicker until I remove the charger.

  Does anyone have a solution? Thank you.

  
  

• the monitor can not display any image on the screen. CPU power button is lit orange instead of green.

  Original title: I have absolutely no idea of what is wrong with my Dell Dimension C521 Windows Vista (x 86)

  It is impossible to display an image on the screen. CPU power button is lit orange instead of green.

  See page 47 of the owner's manual

  http://support.Dell.com/support/eDOCS/systems/dimc521/en/OM_EN/RP333A00.PDF

• T410 doesn't start, white screen and the keyboard does not power on.

  Hi, my laptop Lenovo T410 does not start. I hit the power button and looks like it is about to start. The thinklight flashes on as normal, the cd drive is checked, the caps lock on, then nothing/button blinks. No display and the keyboard does not respond. Power led lights up; If I leave it awhile the fan turns on. Can I stop the machine using the power button, but the problem remains the next time I turn it on.

  I tried to remove power and battery, power 10 button time then with the power to 30 seconds, before replacing the power supply and the battery but nothing happens. I tried to use a different keyboard. I tried to plug in an external monitor. No change.

  This problem appeared after I left it on overnight. I have the feeling that it entered into hybernation mode, perhaps, and that it disturbed some important functions which he could not complete. Not sure if. Any help gratefully received.

  Thank you very much

  Pete

  It's the original configuration of your laptop:

  ThinkPad T410 2522BF1
  
  i5 - 520 M (2.4 GHz), 4 GB RAM, 160 GB 7200 RPM HD, 14.1 in. LCD 1280 x 800, Intel 5700MHD, DVD, Intel 802.11agn Wireless Modem, 1 Gb Ethernet, UltraNav smart, secure, camera, 6 c Li-ion, Win7 Pro 32

  I firstly the LCD cable or secondary LED could be damaged, but if you don't see anything on an external monitor I tend to think it's a motherboard problem.

  Last thing you could try putting running a Live Distro Linux from a CD/DVD or USB drive, using Ubuntu or Linux Mint, for example.

• Latitude E7450 processor and controller, E - 2, unstable configuration port of the U2715H - two monitors-

  I have two monitors U2715H connected via a CDM-> DP cable each to a docking station E-Port Plus (in fact an Advanced Port Replicator EURO2) in which sits a laptop Latitude E7450 processor and controller. All items are brand new. E7450 processor and controller is equipped with 16 GB of RAM and two graphics cards: Intel HD 5500 Graphics and NVIDIA GeForce 840 M; selection is automatic, which usually means that the 5500 is running. It runs Windows 7 Enterprise SP1 (64-bit). The docking station has apparently DP 1.2 a capacity (for chaining) but DP 1.2 is disabled in both monitors.

  I have correctly configured the system to have Windows desktop space both monitors at 2560 x 1440 resolution, even with screen internal latitude as a third request for an extension to its full resolution (1920 x 1080). The main screen can be set to one of the two (or three) and I can successfully move the sequence of monitors around (left, middle, right).

  There is therefore no doubt about the ability of the system to support the planned configuration. However, when I dock the Latitude (most with the lid closed) and start, most of the time he is unable to restore the configuration of the two external monitors. Some of the symptoms are: one or two monitors go black, indicating the cable connected but no signal from the docking station. If there is a picture on one of the monitors at startup, it may or may not contain the login screen. (I can still log in because I know which keystrokes to send.) If the login screen is visible, it is usually in low resolution. If I have several active screens, but one is black, I can move the mouse pointer (or an entire window) on the screen black (in the middle or on the side), but it is not visible here.

  Both monitors come right out of the box and the only change I made is to move from the DP to the mDP as input channel. I reinstalled the cables and exchanged the cables between the two DPs on the docking station. I turned the market monitors. I ran the self-test the requirements on both monitors. The connection of the laptop on the docking station is a little wobbly, but I use the spacer provided for the E7450 processor and controller and making sure the connection is correct and stable. I've updated all the drivers and BIOS of processors E7450 and controller. I recently saw a reference to a BIOS for the docking station; I didn't know it existed, but I'm not.

  The installation instructions provided with the monitors were a note on consulting the CD provided for the use of the screen to maximum resolution. E7450 processor and controller is not an optical drive, but I read all of the documentation for the monitor to Support technical without finding what whatsoever to shed light on the situation (in addition to ensure that the graphics card and drivers are up to the task).

  Once I connected, I can manage to make it all in order by randomly (?) lower the resolution of the screen, change the position of the main screen (left-center-right), deselection reselection CDM as entry way and forcing other changes. Once the two or all three screens in operation, I can put them all to maximum resolution and beginning of work. However, it is rather annoying and I would like to have a stable configuration.

  The configuration seems to survive power cycling of the laptop / station but not if I also disconnect the laptop. I should mention that when I detach the E7450 processor and controller, I can use it in other configurations, with or without other external monitors through other ports, before turning it off and later re - anchor as described. However, for the first month I had two old non-moniteurs Dell of any resolution (on DVI and VGA ports) connected to the docking station and the configuration is stable, and for years I used for my older Latitude with a docking station that is older, remembering his device between different hardware configurations.

  Please, someone - and Dell support staff in particular?

  (Editing/updating after transfer of the Forum/devices/Forum/computer laptop and video monitors)

  A brief update of the Denmark...

  We have experienced the issue for several months since the purchase of laptops E7450 processor and controller and docks of Port E II.
  (HDMI screens / black screens with flashing DisplayPort).

  But the new Dock firmware A07 21 v3.10.1. April seems to have solved all our problems.

  Here is the link VMM3320 STD HUB Firmware for E5250/E5450/E5550/E7250/processors E7450 and controller:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=FV9KP&FILEID=3535351776&osCode=WT64A&ProductCode=latitude-E7450-Ultrabook&LanguageCode=en&CategoryID=VI

  Best regards
  Martin

• Satelite L775 used high power - orange light blinks 5 times

  Greetings,

  I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

  This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

  My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

  I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

  A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

  I can't afford to send my Toshiba for 2 weeks, not immediately.

  Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

  Disconnect the battery and press power for 30 seconds
  Unplug the adapter and press power for 30 seconds
  Disconnect the battery and the adapter and press power for 30 seconds

  (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

  I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

  I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

  One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
  I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

  Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

  The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

  Thanks for the time and help!

  Hi a8000

  Looks like you already tried all possible solutions
  The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
  However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!

• My computer has stopped responding to the parameters in my power options tool.

  My computer has stopped responding to the parameters in my power options tool. "IE I settled on 'disable the monitor in 15 min', turn off hard drives in 20 minutes" and "mode standby in 25 minutes.  But it does not follow these parameters. He just continues to run.

  original title: Auto standby until the day before

  You can try to change the settings, see if they meet the new settings and then change back to your desired configuration.

  Please give some more information:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  Also this system to be free of infections:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  After return with results and INFORMATION.

• Intermittent operation (especially just a power indicator light flashes) on WRT-150N

  Anyone know if these symptoms mean that my router is dead all just please? It runs for about a week or two and then the power light flashes quickly. It is then assigns IPs constantly, whenever I have try refreshing the DNCP on my Mac (or Linux).

  I can get it to keep the constant power indicator by pressing reset while you insert the power supply plug, but then it sets itself simply IPs again.

  It broadcasts its radio very well at all times.

  Connect to it with a Mac just translates what OSX calls a 'time of connection' which seems to be MacSpeak for ' we tried connecting but your router is assigning its IP address, so we used to bother Cuatros "cos you will not be able to use this connection"

  If I leave it off for a few weeks, I can connect again, and sometimes it works fine but only for a week or two. Then the power light flashes and it will not assign an IP address most.

  It doesn't have the latest firmware, but it SEEMS a little more like a hardware problem than a firmware the firmware seems to be working fine when I connect it on the occasions where it runs correctly.

  It would seem that the problem is indeed with the router. Try to perform a 30-30-30 reset and then check if the router will have now a stable performance. In case the router still does not work, then you can either: contact technical support for assistance or to replace the router with a new one.

• Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  Why does take so long to load from the time wherever I power up until it takes to get to the login screen? help taking too long

  You should take a look at your startup programs and decide what is really necessary and what is nothing more than useless clutter. There is nothing wrong with the startup programs, some may be really useful or even necessary for your personal needs. But keep in mind that many programs build to start when you start the computer and that most of them must not start when the computer starts, all they do is slow down your boot time and clutter of things when you're trying to solve problems, and some are downright harmful!

  I mean, have you really need things like real Planner and Gadwin Print Screen running all the time? These programs will run very well, even if they are not started automatically every time that you start the computer. Go to these programs and change/disable their boot option. Some may be difficult to kill for public assistance services can be useful when you try to control startup programs. Try CodeStuff Starter, it's safe and easy to use, I think you'll like it, download it here:

  http://CodeStuff.tripod.com/products_starter.html>

  Use AutoRuns to check axis start, Richard:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

  Use Cclenar-> tools-> start

  http://www.CCleaner.com/download/builds.aspx>

  I can't tell you what to keep, startup items it is a personal preference, but pretty well all the startup items indicated by CodeStuff Starter are safe to disable, and changes are easy to reverse if you change your mind. Searches for items it shows you and decide whether or not these things are really useful or necessary. Some programs will be started at startup without your knowledge and over time, that list can expand to include useless parasites, part of good computer maintenance includes regular control of these startup items and the removal of the unnecessary.

  Suggest that you first spread malware as the cause of the problem by following these steps:

  I. - delete your temporary files

  Clean the system (compensation to all temp/tmp folders and included all the content offline, the tif browser, delete the cookies of compensation.)

  Do a disk cleanup. Click the Start button. in the search box, type disk cleanupand then in the list of results, click Disk Cleanup. Better and easier to use - ccleaner.

  Download the basic version (slim) via

  http://www.Piriform.com/CCleaner/builds>

  The basic version (slim) does not contain the toolbar disgusted

  DO NOT USE ANY cleaning of the advanced options. DO NOT TOUCH THE REGISTRY OR TOOLS. At least not for now.

  Reset

  II. - have your system scanned as a result of security/antivirus installed.

  III. - download, install, update and run both of these tools to a-squared free scans:

  MalwareBytes anti-malware (MBAM)

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware (SAS)

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  UTC/GMT is 18:16 on Wednesday, January 18, 2012

• A55 does not start; power indicator not now

  We have an A55 (8705/J3U) just out of warranty (exp. 1 June) that will not start. Feeding tests as good all around (Antec tester), confirming the green power LED 115V on the back. Fans and HD light and service HD LED lights up green in the face, but the front works indicator LED will glow. No beeps for diagnosis, without video to see the POST messages and no set rotation of CD/DVD to try to start like that.  Have replaced the range cables for power, electric, front power switch & led and HD set.

  After reviewing other threads, I see that "[i] f the power button is pressed and the light does not illuminate, then boot block recovery will not work."  If the USB and BBR idea floppy drive looks (and in any event it is did nothing for the PC recently that operating system Windows and usual Office patches: no update of the BIOS).  After you verify that the power supply is good, am I now backed up to no way out (1) new card system, or (2) new PC?  (Because the power switch itself will begin the HD & fans, and it taking four seconds will turn the fans and HD market back, I'm not inclined to think that a new power switch will work.)  But I am open to learn... TIA for any help Yes.)

  Motherboard, that's what I would try next also after reading all of the symptoms you mention.  Your food is really good and it seems that the switch works.  There is the possibility that the LEDs on the switch Assembly may be interrupted, but its doubtful.  A dead CPU could also cause the errors you mention, but it is the least likely to fail.

• HP vs17x monitor power light flashes

  After that I have wear my computer wakes my vs17x monitor power button/led flashes blue, with the sound of what I guess is power going to the speakers and continues unless I hold down to shoot or to pull the plug.

  After a waiting and clicking on that I can get it back to normal, but as far as I know it's just random clicks that make backup

  Diagnostics/suggestions?

  Thank you

  -Update-

  -This morning, I was able to get my screen upwards by pressing the power button on my keyboard, compaq (Crescent Moon, which puts Eve/displays start/stop/standby menu)

  Also all the icons on my desktop have been rearranged, put to the left/up, but I'm not sure if this is due to my clicking on random

  -This afternoon I after walking away for a bit (after that I turned it on) the screen came back to the top

  Message edited by J_Winn on 10/15/2009 03:52
  Message edited by J_Winn on 10/15/2009 12:48

  I managed to solve this problem by replacing a part burned capacitors in the monitor

  just over $ 3.00 to buy 2 new

  Incase anyone else has this problem

• Windows 7 power indicator problem

  Hello... I have a problem with my windows 7, whenever I use it for a long time and then it off via the start menu, the power light is still on and I hear again the fan running despite the display saying it is turned off and then blacj. In order to close it completely, I need to hold the power button and I know it will be bad for my laptop if I still force closure with button / stop. Curiously, it doesn't happen when I use my laptop for a long time, perhaps more than an hour... But if I use my laptop for a few minutes, there is no problem with power indicator. Can someone help me with this please?

  P.S. I am a newbie in this then I would be happy if you could explain it in the easy way

  Hello

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to shutdown of Windows problem. I will definitely help you.

  This problem may occur because of corrupted or incorrect power settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run troubleshooting of power utility and check.
  Reference:
  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  It checks things like settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  If this does not help, use method 2.

  Method 2:
  Create a new power plan and check the issue.
  Reference:
  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows/change-create-delete-power-plan-scheme#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• My iphone 6 does not light, I held the home button and power at the same time and no vibration or no sign of life, any suggestions as to what it could be would be appreciated

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Marley6921 wrote:

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.

• "Enter the password administrator or power on password"

  "Enter the password administrator or power on password"

  Hello

  Try to enter: 31762234

  Kind regards

  DP - K