Similar Questions

• VSA does virtual vCenter Appliance support

  We are setting up a remote site with VSA running on both nodes ESX with a third ESX Server built to manage the instance of vCenter.  We run vCenter device for our main campus and would like to remain consistent, but I read her you need to run on a Windows Server vCenter.  Someone at - it care to confirm or deny?

  VSA is and add-on for vCenter for Windows.

  Some clues:

  • "vsphere Storage Appliance Planning Checklist" (http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsa.doc_10/GUID-2F776546-FAFD-4C07-8588-DD87CCFC186F.html#GUID-2F776546-FAFD-4C07-8588-DD87CCFC186F). It is said to istall vCenter on a virtual or physical machine (vCenter Server Appliance is virtual ony)
  • the "Install vCenter Server for VSA ' (http://pubs.vmware.com/vsphere-50/topic/com.vmware.vsa.doc_10/GUID-045C6534-66AA-4034-BC53-59F2FE40A1AC.html) vCenter Server requires Microsoft .NET 3.5 SP1 Framework. (so Windows)
  • "Yellow brick - vCenter device" (http://www.yellow-bricks.com/2011/08/10/vcenter-appliance/)

  My 2 cents

  Sam

• Preparation of deep security virtual ESXi Appliance

  Hello

  I'm not sure that this is the best place to ask this question. But, I tried to install the Virtual Appliance of deep security, but when I try to prepare the ESXi in deep Security Manager (Deep Security Manager is a VM virtualized in my computer) I get the following error: "unable to download .zip bundle in offline mode. Ensure that the ESX Server can connect to XXXXXXXXX on port 4119. "I turned off the Windows Firewall on the virtual machine and the physical machine that hosts it. Someone has already worked with deep security? No idea how I can fix this problem? Any help would be appreciated.

  You should also ensure that the ESX Server can communicate with the deep Security Manager. During the process of preparation, the DSM gives the vCenter a temporary URL for the filter driver. vCenter then passes this information to the ESX Server that is responsible for downloading the driver himself.

  Ping the DSM of the ESX command line and see if you can get there by train.

• Acronyms of virtual Security Appliances

  It is more a question of coherence, rather than starting a new thread.

  But the acronym/abbreviation that will be used for the Web Cisco Security Appliance.  I saw vWSA and WSAv.  I would like just a bit of clarity, for reviewing products with my management.

  According to the official Cisco Data Sheet for Web Security Appliance below:

  http://www.Cisco.com/c/en/us/products/collateral/security/content-Securi...

  It's using WSAv, then maybe go with it.

• Center virtual server appliance 5.1 and 5.1 view composer

  Espero esta ultima sea mi pregunta

  VMware virtual center server device works con con vmware view y en con especial composer? No encuentro eso still acerca information

  Saludos,

  Hola

  Probe vcax 5. 0 b y composer 3. Not to speak, por lo, tras not find information, supongo than no work. Tampoco el appears matrix promotion device en el

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

  Saludos

• upgrade windows vcenter 5.1 with oracle external to the appliance database virtual 6

  Hey people,

  We have a Windows external Vcenter 5.1 with an oracle database server. We would like to upgrade to an appliance Vcenter virtual v6 with an external oracle database. I was not able to find much info on this since most posts and blogs are based or sql.

  Is it as simple as deploying a new installation of a Vcenter virtuall device v6 and then connect it with our database current oracle and move virtual machines and turn from the old Server 5.1?

  GR,

  Michiel

  Welcome to the community,

  You can not skip vcenter windows 5.1 with oracle external to the appliance database virtual 6. You can improve windows vcenter 5.1 with oracle database external to vCenter windows 6.0 with external oracle database.

  From now officially VMware does not support migration from Windows to vCSA. But it is adventure, you can explore more

  https://labs.VMware.com/flings/VCs-to-VCVA-converter

  Concerning

• Is there a mechanism to prevent the Virtual Appliances Cisco to be cloned or exported in the form of the OVF/EGGS?

  I am very confused why Cisco has no mechanism to prevent its virtual appliances are cloned or copied, for example I can install ACS 5.6, buy a license and deploy it, then I can export the virtual as appliance and the OVA file and deploy it elsewhere in other licenses without the need to buy another license, after the deployment of file EGGS I can even change the IP address , Default Gateway, NTP server or any settings that I want but license is valid in steel...

  Why the hell is happening?

  Not a bug, it's how ACS works now, it's your ethical standards if you break this system of 'trust' that Cisco has implemented. It is actually as most of the Cisco product was working at the time, and some products are back for this model (ASA APEX ex.)

• Oracle cloud virtual image, I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud... But could please at least use us dbconsole?

  On oracle cloud virtual, image I was able to create the database using DBCA (virtual image) oracle cloud. I understand with the virtual image, we won't have a lot of tools like on DAAS cloud. But could please at least use us dbconsole?

  
  I tried to start dbconsole, and it did not work:

  [oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  
  

  According to the oracle help doc center - "creating a database on an instance of virtual image service" (http://docs.oracle.com/cloud/latest/dbcs_dbaas/CSDBI/GUID-29290A81-8798-4988-848E-77A1BE0CF08A.htm#GUID-4851560B-D4B6-42...)

  database was created with the option as:

  emConfiguration - NONE - storageType FS

  
  

  I guess we have to manually configure the em console, but when I tried to create it, he told me that "' Dbcontrol repository already exists." "

  When I try to start it, it exports the error

  [Oracle@ltutest ~] $ emctl start dbconsole

  OC4J Configuration problem. /U01/app/Oracle/product/11.2.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_ltutest.compute-aulatrobeu83140.oraclecloud.internal_ORCL not found.

  Could someone could give me help with this problem?

  
  

  Thanks Brian. I tried your command, and it works. Now I've encountered another problem, how can I browse the URL?

  I created the access rule for access remote on port 1521 and 1158. but when I try to browse the EM console URL, it does not work. all the configurations that I need to do?

• Impossible to install oracle 10g on windows XP (Virtual Box)

  Hi all

  I have installed windows XP in Virtual Box, trying to install Oracle 10 g in it. It does not start the installation... no idea about it.  I installed winrar (as the installation of 10g in rar format, due check out it).

  no problem winrar got installed, where as Oracle 10 g just don't settle... no error message is thrown...

  in fact, I installed 10g on a XP PC last week... not sure where what Miss me

  I use 'Briged adapter' network

  If anyone has experienced the same problem, please let me know...

  Florent

  Hi Srini,

  Thank you for helping me with the link to be honest, I had looked into it long back...

  Yes, the software worked just yesterday, I had installed on XP(different machine).

  I've added my PC to the domain, logged in as administrator & double clicked, even... no response.

  Finally, I used "command prompt" and it worked!   don't know how or why... but worked.

  Now my database is created successfully

  Yes would like to know why this happened... and how things worked via the command prompt & not by double clicking... would be very happy if someone can help me on this.

• Access to Oracle Press VirtualBox virtual host

  Hello

  I have a windows host system 8, install the Virtual Box last edition.

  The guest operating system is Linux oracle that came with the selection of pre-designed developer programs Oracle's VM.

  The virtual machine is set to HOST ONLY the network settings.

  Now, the thing is I want to access the Oracle in the guest from my windows host computer.

  the guest operating system indicates the IP 192.168.56.101. I can ping the IP address of the HOST machine, but cannot connect to the

  Developer SQL to oracle in the guest to the host OS. He goes on to say that impossible to connect the network card.

  Please I need help, now please do not say that to install the oracle in the window itself. In fact, I want to do the same on my macbook pro since it is my main machine.

  Hello guys,.

  Thanks for the responses you provided really appreciate it.

  I made this connection and access between the host and the guest, and to access the oracle on the guest database.

  System information:

  • MacBook Pro - OS X 10.8.4
  • RAM 4 GB [go to 8 GB]
  • Package VM: Oracle Virtual Box
  • Guest VM: Oracle VM [ http://goo.gl/dtbzO ] developer pre-designed program selection
  • Network connection: host only

  Steps to connect the host to host

  1. If you see the "ifconfig", you will see a network card named 'vboxnet0' [created after the installation of VB]
  2. Check the address allocated to the virtual machine [MAC]-> preferences-> network: copy the beginning or between address, which in my case has been 192.168.56.101 [start a]
  3. Assign the address to the vboxnet0 adepter by terminal: sudo ifconfig vboxnet0 alias 192.168.56.101 to the top
  4. Change the virtual machine network affecting "Host," only
  5. Select the vboxnet0 virtual adapter in the adapter list, apply the configurations, click ok
  6. Start the guest operating system and login
  7. Check the IP configuration it by ifconfig, you will find the map eth0 with the same IP address that you assigned to the vboxnet0 on the host machine.
  8. Sql Developer on the host machine fire
  9. Make a new connection and "Hostname" as even as the vboxnet0 IE. 192.168.56.101, fill in the other details of the connection details Oracle needed comments
  10. Test the connection
  11. Woollaaaa you are finished

• Looking for advice reg Oracle 12 c installation on Ubuntu

  Hi gurus,

  I need your advice on the installation of Oracle 12 c.

  Background:

  Our application uses the Hibernate Java framework and its works well on Oracle 11 g.

  Our customer wants to use Oracle 12 c for good.

  I just need to confirm if my application runs on Oracle 12 c with existing configurations.

  My problem:

  I'm pondering different options to quickly install Oracle 12 c on my Ubuntu. My network speed and bandwidth are not great, I prefer download as less as possible as my intention is simply to check the compatibility of my application. I was able to install Oracle 11 g 2 on my system which took a lot of effort, and I don't want to disturb this facility.

  Here are the options I'm considering. Please guide me what is the possible choice and better quality. (As now I have not downloaded any software expect Oracle VM Virtual Machine for Ubuntu which is a 90 MB size)

  (1) I have vmware installed, download image for Oracle for Linux and Oracle 12 c database for Oracle for Linux. Create a virtual OS for Oracle for Linux, run Oracle 12 c

  (2) Download Oracle VM Virtual Machine for Ubuntu, download image for Oracle for Linux and Oracle 12 c database for Oracle for Linux. Create a virtual OS for Oracle for Linux and run Oracle 12 c. Installation of Oracle VM Virtual Machine for Ubuntu is to give a few problems that need to be sorted

  (3) download a Redhat Linux image and run it from VMware. Since Oracle 12 c is certified for Redhat, install on Redhat on Virtual Machine

  (4) install Oracle 12 c on Ubuntu itself through guides available on the web.

  My config system as follows:

  Ubuntu

  12.04 precision 64-bit output

  Kernel Linux 3.8.0 - 42-generic

  GNOME 3.4.2

  Memory: 7.7 G

  Processor: CPU i5 - 3230M @ 2.6 Ghz x 4

  Available disk space: 55.le GB

  [in case it is the best place for the question, please direct me to the same.]

  pvvdp wrote:

  Hi gurus,

  I need your advice on the installation of Oracle 12 c.

  Background:

  Our application uses the Hibernate Java framework and its works well on Oracle 11 g.

  Our customer wants to use Oracle 12 c for good.

  I just need to confirm if my application runs on Oracle 12 c with existing configurations.

  My problem:

  I'm pondering different options to quickly install Oracle 12 c on my Ubuntu. My network speed and bandwidth are not great, I prefer download as less as possible as my intention is simply to check the compatibility of my application. I was able to install Oracle 11 g 2 on my system which took a lot of effort, and I don't want to disturb this facility.

  Here are the options I'm considering. Please guide me what is the possible choice and better quality. (As now I have not downloaded any software expect Oracle VM Virtual Machine for Ubuntu which is a 90 MB size)

  (1) I have vmware installed, download image for Oracle for Linux and Oracle 12 c database for Oracle for Linux. Create a virtual OS for Oracle for Linux, run Oracle 12 c

  OK, it looks like your reference to 'Oracle for Linux' is in fact 'Oracle' - Oracle Linux version of the Linux operating system, built out of Red Hat Linux.

  If this is what you mean - create a virtual machine that is running Oracle Linux... then, running Oracle RDBMS on this virtual machine, and then you run on an operating system taken supported Oracle.  It doesn't really matter what the host's OS.

  Mind you, you would be probably hard pressed to actually get support in the form of an SR, but it does not appear that's really your concern, and it doesn't seem to me, the way I read your post, it should be a matter of concern.  You just want to run oracle on an OS that will be easy to install and have a justified expectation that thing will work as documented.

  (2) Download Oracle VM Virtual Machine for Ubuntu, download image for Oracle for Linux and Oracle 12 c database for Oracle for Linux. Create a virtual OS for Oracle for Linux and run Oracle 12 c. Installation of Oracle VM Virtual Machine for Ubuntu is to give a few problems that need to be sorted

  (3) download a Redhat Linux image and run it from VMware. Since Oracle 12 c is certified for Redhat, install on Redhat on Virtual Machine

  My previous comment seems to also apply to the #2 and #3 elements.

  (4) install Oracle 12 c on Ubuntu itself through guides available on the web.

  Bad idea.

  My config system as follows:

  Ubuntu

  12.04 precision 64-bit output

  Kernel Linux 3.8.0 - 42-generic

  GNOME 3.4.2

  Memory: 7.7 G

  Processor: CPU i5 - 3230M @ 2.6 Ghz x 4

  Available disk space: 55.le GB

  55g available disk could be things short cut.  If you cannot release everything, you could get an external drive for a very reasonable cost and put your entire VM installation on it.  See other comments about the CPU for virtualization products.

• Where to download the sample database for Siebel Innovation Pack delivery Oracle Cloud 2015?

  Hello

  Where to download the example for Siebel Innovation Pack 2015 database?

  I downloaded the complete packages for Siebel Innovation Pack 2015 for Windows 64 - bit Oracle Cloud delivery, but I can't find the sample database installation folder after downloading all available components.

  Please help, thanks.

  Hello

  DB sample installer are no longer available on Oracle Cloud delivery. To get the sample DB, you need to download the Group of hotfixes 5 of Siebel 15 "Patches and updates" section of the portal My Oracle Support (Patch Id: 22081062) and extract the image from the network using SNIC as usual. You may notice that SNIC now offers local ORACLE XE and sample database.

  Also if you select ORACLE XE options while creating the network image and inspect the network image files, you will miss the separate installers. This is because the sample for Oracle XE database Installer is included in the Web Client of Siebel (Mobile/Developer) and the local database setup is included in the Siebel tools.

  So when you run Setup of the Siebel Web Client for the installation of the patch group, you can choose to include the database, which is installed in quiet mode. Please try to install web client and let us know if it gives you the opportunity to choose to include the example database.

  For more details, please visit virtual library:

  http://docs.Oracle.com/CD/E63029_01/books/SiebInstWIN/SiebInstCOM_Image2.html#wp1995894 http://docs.Oracle.com/CD/E63029_01/Books/SiebInstWIN/SiebInstCOM_Image2.html#wp1995894

  Hope this information helps.

  Thank you best regards &,.

  Jean Arpit

• Installation of Oracle Database Release 1 12 c in laptop

  I intend to install

  Database Oracle 12 c Release 1 in some windows 64 laptop 8.1 (book Ultranote), with the below mentioned configuration and main use of this facility is to allow me to get hold of 12 c and prepare my TRAY and OCP. Do it me know this configuration will suffice or should I go for a normal laptop with Intel i7.

  Processor - Intel® Core™ M-5Y70 processor 1.1 Ghz, Max Turbofrequenz 2.6 GHz

  RAM - 8 GB OF DDR3 MEMORY

  Hard disk: SSD 512 GB

  I suggest to install VirtualBox and create a virtual machine from comments running Oracle Linux 6.6 for x86_64. Both products are free. Such a configuration will allow you to easily recover from any mistakes that you do without jeopardizing your host operating system and also allow you to create multiple virtual storage devices to experiment with Oracle ASM. Simply create a virtual machine with bridged network or host-only layout and make sure hardware assisted virtualization (VT - x) is enabled in the Bios of your PC. Assigning the 4 GB of RAM to your virtual machine will be sufficient to run the server Oracle 12 c and ASM. 12 c Setup, follow https://docs.oracle.com/database/121/LADBI/toc.htm. That's what I used to prepare and pass 11g and 12 c OCP and Setup worked very well.

  Your hardware is sufficient. I used a Macbook Pro 7 years with an old dual core processor at 2.53 Ghz with 8 GB of RAM installed and had no problem of performance or installation with the above configuration.

• Oracle BI EE installed the database on Oracle 12 c

  Hi, Im trying to install Oracle BI EE, I started to run RCU on Oracle Database 12 c but I get this error:

  oracle.sysman.assistants.rcu.backend.validation.PrereqException: UCR-6083: impossible - check requirement prerequisites for the selected item: BIPLATFORM

  Refer to the journal of the RCUS to C:\Users\MCG\Downloads\ofm_rcu_win_11.1.1.6.0_disk1_1of1\rcuHome\rcu\log\logdir.2015-05-14_07-46\rcu.log for more details.

  at oracle.sysman.assistants.rcu.backend.validation.PrereqEvaluator.executePrereqTask(PrereqEvaluator.java:658)

  at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:68)

  at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)

  at java.lang.Thread.run(Thread.java:662)

  2015-05-14 07:47:42.214 rcu ERROR: oracle.sysman.assistants.rcu.backend.task.ActualTask::run: UCR failed

  oracle.sysman.assistants.common.task.TaskExecutionException: UCR-6083: impossible - check requirement prerequisites for the selected item: BIPLATFORM

  Refer to the journal of the RCUS to C:\Users\MCG\Downloads\ofm_rcu_win_11.1.1.6.0_disk1_1of1\rcuHome\rcu\log\logdir.2015-05-14_07-46\rcu.log for more details.

  ------------------------------------------------------------------------------

  Component: BIPLATFORM

  Error: Failed creating repository control.

  Cause: As SYSDBA to create the repository BIPLATFORM must connect.

  Action: Connect to the database as SYSDBA.  For example, you can connect

  to the database using the SYS account.

  -------------------------------------------------------------------------------

  at oracle.sysman.assistants.rcu.backend.task.PrereqTask.execute(PrereqTask.java:76)

  at oracle.sysman.assistants.rcu.backend.task.ActualTask.run(TaskRunner.java:306)

  at java.lang.Thread.run(Thread.java:662)

  I have to confirm whether Oracle Business Intelligence Enterprise Edition can be supported on the basis of data Oracle 12 c.

  Thank you.

  OBIEE supports Oracle DB 12 c, you can check in the matrix of certification for details (google for the matrix).

  For a certified system, you need to upgrade from weblogic, if it's just to test or a certified system is not required you can also use it directly.

  In case your 12 c is configured as multitenant you must specify a connection to a PDB file and not the CDB (but still using a SYS / SYSDBA account) in the RCI.

• Update Virtual Center 5.0 to 5.1 (using Cisco Nexus 1000V)

  Need advice on upgrading production please.

  current environment

  Race of Virtual Center 5.0 as a virtual machine to connect to oracle VM DB

  3 groups

  1: 8 blades of ESXI 5.0 IBM cluster, CLuster 2: 5 IBM 3850 x 5

  2 cisco Nexus 1000v of which cluster only 1 use.

  I know that the procedure of upgrading to 5.1

  1. create DB SSO, SSO of installation

  2 upgrading VC to 5.1

  3. install WEB CLient set up AD authentication

  IT IS:

  I have problems with the Nexus 1000? I hope the upgrade will treat them as he would a distributed switch and I should have no problem.

  He wj, treat the Nexus as a dVS.