The prelude scripted sequence doesn't seem to be 'perfectly' editable in first Pro CC

Hello

Help, please.

I worked on a movie and created all the rough cut, using as well all the clips and video clips, in prelude CC. Once I sent the first fitting first Pro CC, I expected that I could 'seamless' (as advertised) continue the same sequence of clips for editing and under the video clips in Premiere Pro. When I drag and drop the raw file cuts that appear in Premiere Pro in the Premiere Pro timeline, it appears as a single block (which is what a 'nested sequence' is? is it possible for a nest a sequence?) rather than a sequence of clips and subclips.

What's worse, the subclips transfer to Premiere Pro, only the original whole clips. Although I had to recreate the sequence of clips, and video clips in Premiere Pro, it would at least better if I didn't have to redo all subclips. It's incredibly frustrating. I hope there is one solution (other than waiting to buy the next version of the same product).

I give up and assume that products have been designed just not what I expect them are designed for, except that in the video tutorials, both within Adobe and besides, both programs seem to work just as I expected to do (it is probably where I have this expectation in fact). When the guy in the video sends a rough-cut of prelude to Premiere Pro, he appears in Premiere Pro as an editable clips and video sequence.

Thank you.

Often when sequences itself as 'a piece' this box must be changed

Tags: Premiere

Similar Questions

  • The left side of my headphones is stronger than the right side, I tried the L and R slider in the settings, but it doesn't seem to work! Help, please

    On the side of my ear legt is stronger than the right side and I tried the L and R slider in the settings but it doesn't seem to work! Help, please!     BTW, I have the iphone 6 sec more

    Left *.

    earphone *.

  • [Can't press Ctrl +] to the telnet command, it doesn't seem to work?

    [Can't press Ctrl +] to the telnet command, it doesn't seem to work?

    Hello

    1. have you made changes on the computer before this problem?

    2. the computer is on a domain network?

    Follow these steps to escape the Telnet connection.

    a. to start a Telnet session
    b, click the Start button, click Run, and type command prompt.

    c. type telnet {destination or IP address}

    [(d) in order to escape the Telnet connection, type Ctrl +].

    Also, please provide an explanation more detailed of how you try to get the command works and what you expect to happen.

  • Dell Dimension CPU fan direction. Mine blew hot air pushing in from the cooler in the case. This doesn't seem fair to me.

    Dell Dimension 5150C CPU fan direction. Mine blew hot air pushing in from the cooler in the case. This doesn't seem fair to me. The fan surge frequently at high speed, even on light loads.

    mauread

    Dell Dimension 5150C CPU fan direction. Mine blew hot air pushing in from the cooler in the case. This doesn't seem fair to me. The fan surge frequently at high speed, even on light loads.

    mauread
        
    That's right, in a BTX chassis, air is pulled the intake flange and evacuated by the back panel.
    Did you clean any buildup of dust from the fins of the cooler cooling and the front air intake, recently?
          
    Bev.
  • export the extend script sequence

    Hello

    I want to export the sequence include the video and the title to extend script for adobe first pro

    The PProPanel example is this.

    Samples/PProPanel to master · Adobe-CEP/Samples · GitHub

  • Points square on the screen, but it doesn't seem to be a GPU failure

    Hello. When El Capitan (last) tried to wake up from its sleep it won't but I used the power button to wake him up, when he made these points there. The system froze. I hard rebooted the screen is split in two. I hard rebooted again, they were left, so I did the LANDAU and SMC restores the points place after a while came back (sometimes lines, sometimes the screen would split screen). I removed the adaptor for the second monitor. After doing all this when I started out on a disc USB external (Snow Leopard), the points appeared again a few minutes.

    I did a lot of tests and everything past that. All on their default test setting: on Windows 10: Prime95, GPUtest, sky, Speedfan for the hard drive. On OS x: AHT (the one by which you press D, which has been tested 3 times), Cinebench and disc utilities. Usually when the CPU or GPU, within minutes the points and the screen becomes scrambled in minutes, but there seems to be nothing wrong with the material (late 2009 iMac, make / batch of March 2010). On Windows, Boot Camp 10, everything was fine, no square points.

    This could be a software problem (corrupt kernel I read on some forums could lead the points). Now it has been hours after I did the test and resets, it's normal.

    Extensive tests show that the material is good:

    Thank you in advance. God bless you. Revelation 21:4

    Start in Safe Mode, Mac OS x: Safe Mode bootand see if you get the same problem there. If she does not repeat is to log on to another user on Mac account and check there.

    However, it looks like a GPU card failure.

  • How to transfer music from the PC to the ipod library. Everything has disappeared from the iPod and sync doesn't seem to work.

    iPod Touch ios 6.1.6.  Library and reading lists seem to be ok @ end of pc and I can listen to music. I don't know how to transfer or sync of the iPod to the PC.

    What exactly happens when you try to synchronize?

    ITunes sees the iPod?

    The previous iPod was synchronized to an another computer/iTunes library?

    Have synchronize you successfully from this computer/iTunes library before?

    If so you did anything like updating iTunes on the computer since it synchronized last successfully?

    Play the songs in iTunes?

    All the media he now syncs to iPod?

    You have the right boxes checked for synchronization?

    iTunes: synchronization of multimedia content for iPod and iOS devices

    Try the synchronization using the manual method

    Managing content manually on iPhone, iPad and iPod

    Finally, the restore feature

  • How can I get rid of the virus of the Nav Link, which DOESN'T seem to affect Firefox (not Safari)?

    This virus or malware presents itself as green underlined text in articles. If you click on it or select accidentally by moving your mouse over it, an add-in appears. Also, a new empty window opens indicating the following heading:

    http://rvzr-a.akamaihd.NET/SD/DW32.html?u=http%3A%2f%2Frvzr-a.akamaihd.NET%2Fsd%2Fapps%2Ffusionx%2F0.0.4.html%3Faff%3D1700-1024 & p = & a = & c = 1700-1024 & b = firefox & bv = 28 & t1 = 1396677616337 & tt = 1396677616337 & r = www.mozilla.org & au = 0 & n = yb_fusionx & sn = & mpa = 0 & mp = 0

    Hello evilelf, you have various present malicious addons. Please try resetting firefox (this will keep your bookmarks and passwords).

    Fix Firefox problems caused by malicious software

  • Am not able to install add-ons in Firefox 11 as well as the fixes suggested here doesn't seem to work. Any suggestions?

    Installed Firefox without add-on to display and 11. Tried to install Autofill Forms and I get the message "there was an error to install AutoFill Forms. Try Again"even for any other add-on. In addition, running Norton 360V6 and can't even see Norton Toolbar. Have uninstalled and reinstalled Firefox and 360 (the latter using Norton Removal Tool). Do not have this problem with Internet Explorer or Firefox 11 on my other computers. Just this one. An earlier version of Firefox plugins appears, but not no matter what Add-ons.

    It is possible that there is a problem with the files that store the registry extensions.

    Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

    New files will be created if necessary.

    See "extension corrupted files:

    If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to do a check of compatibility or to see if there is an available update compatibility.

  • The TCP Listen.vi doesn't seem to detect reliably all the elements on the network.

    I use a network dedicated to four devices. When I run the TCP Listen.vi it does not always detect all four of the devices. Sometimes, he gets all of them and in the worst case, a single device.  The question I have is to detect if it's the vi or if there is that something screwed up with the network, or with devices.  I bet on the devices, but the development engineers always tell me it perfect stuff. From time to time, I have a hard time to believe for some reason any.

    Someone has ideas how to analyze where is the problem?  I am a newbie with TCP stupid mistakes are not only possible, but likely.

    Thank you

    Dave

    Nathand,

    I think you have already revealed the possible source of the problem. I think that I do not use this thing correctly based on your information.  I'll go back and rewrite things and see where I get.  And thanks for the tip of Wireshark. Never heard before.

    Thank you!

  • Creative cloud is stuck on "The Update Installation". Doesn't seem to be something.

    CreativeCloud_stalled.jpg

    to uninstall, CC help | Uninstall the creative desktop application Cloud

    In addition, make sure you have no problem connecting with adobe servers course, sign, activation or connection errors. CS5.5 and later, Acrobat DC

  • Code of the software download cards "doesn't seem to be active.

    I bought this from the campus bookstore, a few days ago and want to install it.  can you help me solve this problem?

    Redemption code help

    Please check this box.

    Greetings

    Baudier

  • Save the attachment script gives error "Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000

    Hi all

    I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.

    This is the code:

    Tell application "Mail".

    theMessages set of selection

    Repeat with thisMessage in theMessages

    the value of the theAttachments attached to a letter of thisMessage

    Repeat with thisAttachment in theAttachments

    the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment

    Save thisAttachment in file theAttachmentFileName

    end repeat

    end repeat

    tell the end


    The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.

    The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.

    Any help would be greatly appreciated.

    Kind regards

    Beem

    If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:

    Try

    game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias

    on error - file does not exist

    return Beep 3

    end try

    say application "Mail".

    activate

    the value theMessages to the selection

    Repeat with thisMessage in theMessages

    thisMessage Open

    say application 'System events' to say process "Mail".

    click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1

    Repeat until sheet 1 window 1 is

    end Repeat

    key sequence "o" using { control down,shift down}

    key sequence "Nutty".

    click on button 'Save' of the sheet 1 of window 1

    Repeat while sheet 1 window 1 is

    end Repeat

    key sequence 'w', using {control down} - close this message

    end say

    end Repeat

    end say

  • Search for Windows 7 is not find, I know that the files are there and when I go into the control panel and select indexing options, it doesn't seem to work

    Windows 7 search is not finding I know that the files are there and when I go to the control panel and select the indexing options, it doesn't seem to work. I guess that's a place where the problem of index - what can I do?

    Microsoft has NO solution.

  • The optimizer script PDF

    Hi people

    I'm trying to find a way to generate scripts optimization PDF in Acrobat 9 Pro (Win), so called from JavaScript with the name (or the path, whatever) a profile to use during optimization.

    This feels like it should be a FAQ, but a search in the forums reveals no job and I had no luck with Google or the Acrobat script documentation. I can call it the UI script with

      app.execMenuItem("PDFOptimizer");
    
    

    ... but not select a profile or accept the dialogue. It doesn't seem to be a good API script for him. Am I just blind? Or y at - there no way to do this? It seems that this fundamental task of using Acrobat for.

    My use case is automate a weekly task of processing PDF time so it can be done in a few simple steps by staff without requiring ACLs errors. One of the requirements is to save both versions optimized with resolutions different resampling of image serving.

    --

    Craig Ringer

    POST newspapers

    It is not scriptable in Acrobat except by execution of the menu item.

Maybe you are looking for

  • Settings tab and options

    I am baffled by the sudden difficulty settings tabs options so windows is displayed correctly, and I don't understand all the explanations of the article. I noticed to use POGO who suddenly when you try to open a game in spades, the window does not o

  • files stored in the cache of application data

    Recently, my weekly virus scans took longer and longer. The number of scanned files is increased by tens of thousands every week. A search shows carefully files in the directory C:/Documents and Settings/userxxx/application data/Mozilla/Profiles/.../

  • Satellite A300 - I was electrocuted if I remove a CD

    I was just electrocuted by my laptop. I tried out the cd and it happened. I tried a voltage Creina and carried out the led. Now I swiched the cable into the socket and it's ok... I want just an opinion...

  • Unable to get GPRS settings!

    I am unable to get GPRS settings in my g2 moto... Help help...

  • AC adapter / CC does not charge

    My adapter cannot be determined and it does not, It just happened one day to another, it was working fine before, What can I do?