The printer settings

Similar Questions

• do not save the print settings

  I am trying to print to a Zebra GK420d printer and firefox don't remember my paper size once a label is printed. Ideas on how to force a format of paper and do remember?

  I'm on windows 7 and have changed the size of my printer paper, preference and properties of the printer and it will print successfully in Notepad.

  Hi jpoeffel,

  Have you looked at the article Knowledge Base, solve the printing problems in Firefox? There is some good information in there troubleshooting. I suggest that you try to reset the print settings.

  If this does not work, you should look at article unsaved Preferences.

  Hope this helps!

• Cannot change the print settings

  I have a new printer, an Epson XP 430. My previous printer was also an Epson. With my old printer, when I chose to print (for a document, web page, etc.) the dialog always had an option to choose, black and white. I also could add to the presets and edit presets.

  With this printer, I can see the presets, but I can't make changes. When I click on view Presets, it is not an option for adding a new preset as it was with my old printer and remove and duplicate boxes are grayed out.

  I guess that this is due to the printer, not OS X, as I noticed the difference when I started using the new printer. Am I missing something somewhere? I rarely print in color, so I would have a preset that specifies black & white.

  Thank you.

  Sheri

  Since you have a new printer, you can create new presets. This is done through the printer with the selected printer dialog box, not through the page view Presets. When you select this option to print do the settings that you want to create a preset for and then click on the drop down preset menu. Select "Save current settings as preset" and enter a name for the new preset.

• OfficeJet Pro 8620: Locked out of the printer settings

  Good evening

  I was unable to print wireless so I did a network reset the unit. When I rebooted the machine, I proceeded to return to the network settings in order to capture the wireless information however I received the error "function has been locked by the administrator or the person who set up your printer".

  I'm not sure what is the problem with that I'm the one who created this printer. I assign a password to the machine, and with that, I have no option to enter in order to unlock all the features (there is usually an option under 'Tools'.).

  After some searching through the forums, I printed a wireless test and the results were a single FAILURE for Wireless on.

  Any help/suggestions would be greatly appreciated.

  Kind regards

  Mark

  He had a semi full reset, which once preformed resturned unit to its state of semi reset and allowed me to change the settings I made.

• OfficeJet Pro 8600 N911a: Change the 2 sides of the print settings by default on JO 8600 Pro using Mac El Capitan

  I can't find a way to change the default settings of my printer on 2-sided - I cannot change the print job, but not the default!  In addition, with the print order option page.

  Hello

  In any program, click on file > print to open the print dialog box.

  Once the selection of the required parameters, you should see the menu breast high Preset dialog box print himself.

  Kind regards

  Shlomi

• LaserJet Pro 200 M276nw: Changing the print settings

  I want to print in black only.  When the print dialog box appears, the ONLY option is standard. There is no color/quality Option or the Option advanced as indicated in the manual.  There is no manual control.

  When I open system preferences, as suggested, I get the screen which gives me once again NO parameters.

  

  Hello
  Follow the steps below to print using black ink only, these are accessible from the print itself, dialog not print & Fax:
  
  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to the product model to see all available parameters.
  
  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.
  
  3. Select Type/quality paper in the menu dropdown.
  
  4. you may need to click the triangle next to color Options of spending parameters, you will find the levels of gray or black in this dialog box.
  
  You can save the settings for later use by clicking preset > save current settings as preset... a used preset by default remains until you select any other preset.

  Shlomi

• C6280 Contradictoires Message the printer settings

  I get an error message when you start the computer that shows the conflicting settings of printer, paper size, paper. Gives you two choices, Fix automatically or on your own.  It doesn't matter that one you choose jumps always until next time I start my computer. This does not happen when my C6280 is cut, only when the.

  Did not find an answer to this anywhere.

  Any ideas? TY.

  Remember if you find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

• Define the print settings defaiult on Photosmart C309 using Mac

  When I installed the Photosmart C309 software on my Mac, I noticed that the HP Solution Center does not appear.  I used to use a pc, so I was familiar with the Solution Center.  I tried to reinstall the software, but still no Solution Center.  It seems that without it, I have no way to set the default print settings.  Does anyone have a solution (pun intended!) for this?

  OK, thanks for that.  default 10.8 work this way - for all applications which you print, your Mac, remembers the mode in which it last impression.  There is no universal default, for example.

  Try it and see if it behaves in this way.

• adjust the printer settings

  my printer has suddenly stopped printing in black ink, after installing a new cartledge. I can't find how to enter printer setting to possibly adjust the black ink. It prints in color.

  Any help would be appreciated.

  Hello

  ·         What is the brand and model of your printer?

  ·         What happens when you try to print in black?

  ·         Have you received an error message?

  Method 1: I suggest you try to print a black-and-white test page and find the issue.

  Method 2: Clean the print cartridge nozzle and check for the issue. To do so follow the steps below:

  (a) unplug the printer from its

  and remove the device print cartridges. Most printers contain at least two cartridges, one for black and one for the color.

  (b) locate the small holes in the printer where the toner cartridges are installed. Put 10 drops of isopropyl alcohol in each nozzle using a pipette.

  (c) use a soaked q-tip with alcohol to swab around the nozzles to loosen and remove dried ink that has accumulated on top. Let the alcohol evaporates.

  (d) run the printer cleaning and diagnostic test. Repeat steps 2 through 4 as required until the printer produces clean copy.

  Also check the settings of the printer.

  Reply back with more information, helping us to better understand the issue.

• Why the print settings will not save or new presets and why is same all presets and will not change

  recently updated cc current and in print settings of the title occurs.  Don

  Provide relevant information to get faster answers

  More information you provide about your situation, the better equipped with other community members will answer. Consider including the following in your question:

  • Product number and the version of Adobe
  • Operating system and version number
  • The full text of all error messages
  • What you were doing when the problem occurred
  • Screenshots of the problem
  • Computer hardware, such as CPU; GPU; amount of RAM; etc.

• Profiles of papers Gallery not available in the printer settings dialog box

  I have an Epson 3880, and I can't select fine art profiles in the Lightroom and PS CC printer settings dialog box. I don't have a problem with this PS6. I choose the profiles in the main screen under selection Photoshop manages colors, but they are greyed out in the settings dialog box. Same problem with Lightroom. I just sent to SP6 to print, but who's really bad at my productivity!

  What OS are you running and you install the profile in your system and accompany your 3880 printer.  Your case to your printer with Photoshop, the printer button may only be used to define profiles of him have been installed for your printer. Photoshop has nothing to do with the installation of the printer profiles.  It something you. Often when you install printer drivers in the installation process of the paper icc profiles are installed for you printer. If the profile of the paper you want to use is not you must download it from the web site of the printer maker or the web site of paper machine and install it in your operating system..

• Only one size of paper in the printer settings

  I have a printer OKI C5100 when I go into its properties it only shows the size of A4 paper.  I tried to do a custom papersize of 8.5 x 11, but it will not print to it and generates an error.   I use the same driver that uses another user on a similar computer and shows them all standard paper sizes.   I tried emailing help OKI, but got no response.

  Anyone have any ideas on how to get the printer to display all standard paper sizes.  Currently, I'll have to start Virtual XP and print it from there so he could work right.

  I downloaded the driver and installed. I can confirm that only one paper size appears in the list. As you said, there's a place to specify a size custom; However, I can neither confirm nor deny the generation of a printing error, when it is used because I don't actually have the connected printer.

  I checked the specifications of the printer that I could find online. The printer uses GDI (windows Graphics Device Interface) for printing. (These printers are sometimes called 'printers based on the host windows or "Windows printing system"). This makes it difficult to find a driver for a printer that is emulated. His language native printer is PCL or Postscript. On the other hand, the C5400 is 5th PCL compatible 5th HP PCL driver would be a good game - but not for the C5100.

  1-800-OKI-DATA
  (1-800-654-3282)

  E-mail address is removed from the privacy *.

  For the moment, I see no way I can be of further assistance. I'm sorry.

  Tom Ferguson

• where can I find the printer settings? How can I send the printer to the iPhone

  I'm frustrated with the printer not found from my iPhone / iPad.

  Hello

  First of all, please check if your printer in the list:

  http://support.Apple.com/kb/ht4356

  If YES, you can use these fix/install:

  iPad: http://www.Apple.com/support/iPad/Assistant/AirPrint/
  iPhone: http://www.apple.com/support/iphone/assistant/airprint/

  If NOT you must print using other applications (if applicable) such as

  http://iTunes.Apple.com/au/app/HP-eprint/id299531647?Mt=8

  More of this:

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/cloud-services-supported-printers-eprint-AirPrint-print-apps/TD-p/351574

  http://h30434.www3.HP.com/T5/eprint-print-apps-mobile/important-information-for-eprint-home-amp-biz-users-on-iPhone/m-p/1693011

  Kind regards.

• Problems with the print settings

  Hello everyone,

  I try to print a file from photoshop cs5 and want to evolve my media without resize my image. I made sure the appropriate size of media is not checked, but whenever I tried to change the paper size the image changes with it. Also how to untie the scale, height, width options? Here is the a screenshot of my situation advice?

  As Noel said, it would be more useful display the entire dialog box. Also what printer are you using? Dialog boxes change another manufacturer in photoshop based on the printer driver. Therefore, it is difficult to give advice.

  Sounds like you have a small document say, 4 "x 5" and you want to print it centered (I presume) on a sheet of 8.5 x 11 "

  Yet once, as Noel said, select you the paper size in your print to the Printers dialog box. The document does not change size.

• How can I become an administrator I can change the print settings

  my printer cannot print from the computer, so I downloaded a new player, but he said I had to be an administrator to install. How can I become one.

  Hello

  1. What is the operating system running on your computer?

  2. your computer is on a domain?

  3A this works much earlier? If so, remember you have changed your computer?

  You log on to the administrator account to have administrative rights, or to check with the administrator of the computer.

  In addition, if the computer is on a domain you must contact your system administrator.

  Refer to this link and check if it helps: http://windows.microsoft.com/en-US/windows7/Why-cant-I-print