The problem of Panel actions in Flash cc pro on mac

Similar Questions

• Cannot import the audio of any type in Flash CS6 Pro

  Hi all

  I have recorded voice over using hearing and try to import the audio files in Flash CS6 - the problem is that I get the error "one or more files were not imported because there was a problem to read the.

  I tried a multitude of various parameters during the recording of the hearing, including the types of alternative files, all with the same result.  To test yet, I tried to past audio recordings used in other flash videos and I get the same message.  Could someone post ideal settings so I can test that vs have to try each setting at random from there?  I'm running out of options (and sanity!) at this point.  Thank you

  RESOLVED - this issue has something to do with Windows 7.  I came across a thread where someone had a similar problem.

  Turns out that 64 - bit Windows 7 users MUST have Quicktime and iTunes installed for audio works correctly with hearing and Flash.  Flash gives constant problems without it.  Now if only Adobe would update their mistake so users understood what was happening and the resolution is as simple 20-minute download/installation of the e-mail software, life would be much easier for some of its user base.

  Hoping that it happens sooner rather than later.  Hope this post proves useful in the future

• Solution found to the problem of "BAD RTC BATTERY' on Satellite Pro 6100

  Hi, I'm from the Italy.

  I myself have solved this problem without changing the motherboard on my laptop second hand satellite pro 6100.

  for info: [email protected]

  Hello

  may I ask how you solved this? I have the same machine and this error pops up sometimes.

  Welcome them

• How to use the COM (RS-232) port to control the problem LED Panel in LabVIEW

  Hi all

  In my new project, we need display text using the RS232 type LED panel.

  1. is this love order LabVIEW support standard RS-232 Telnet Windows?

  2. my LED Panel does not support VISA, LabVIEW supports another way to send a command to the COM port?

  Thank you.

  Kind regards

  Robert

  
  

• OfficeJet Pro 8600 N911a: Change the 2 sides of the print settings by default on JO 8600 Pro using Mac El Capitan

  I can't find a way to change the default settings of my printer on 2-sided - I cannot change the print job, but not the default!  In addition, with the print order option page.

  Hello

  In any program, click on file > print to open the print dialog box.

  Once the selection of the required parameters, you should see the menu breast high Preset dialog box print himself.

  Kind regards

  Shlomi

• Behavior of cooling after only the BIOS Flash - Satellite Pro A300

  Hello everyone,

  I have two laptop computers, Satellite Pro A300 Satellite A300. Both have the same configuration, C2D E8300 2 GB, ATI 3650 512 MB and so on...

  Today I flashed BIOS to the latest version (from V3.90 to V4.20) on both of them. Version 3.90 cooling was OK, fan worked only when it was necessary. But now after that flashing the BIOS fan runs constantly, he does not stop.

  What I did in Vista under Toshiba Power Saver Power Options, I changed the cooling method of maximum Performance to optimised battery, reverse cooling operation, but coverage (keyboard area) has become a bit warmer.

  My question is, what is the problem with cooling in the new version (v4.20)? And how to fix this?
  Yet once again, the problem did not exist before flashing the BIOS and the problem is on both computers.

  Thank you very much for your help!

  Best regards
  Osman

  > What I did in Vista under Toshiba Power Saver Power Options, I changed the cooling method of maximum Performance to optimised battery, reverse cooling operation, but coverage (keyboard area) has become a bit warmer.

  I doubt that there could be something wrong, I want to say that you said that after changing the method in cooling Toshiba Power Saver, the fans don't run all the time
  Usually the cooling modules are controlled by energy savings and the BIOS contains only the table fan.

  Keyboard of my laptop or on the left side of the laptop becomes too hot because on this side, you find the cooling modules that blow hot air

  Nothing so unusual...

• Tablet draws a leak out of the screen directly to the left, whenever I have down Flash CC

  My TS-6608 Turcom / Oh P608N Tablet (people say that they are the same model and I tried both the original driver P608N installation and driver installation Turcom TS-6608 slightly modified for Windows 10 Turcomdrivers)

  draws a line from leaking out of the screen directly to the left whenever I have support with my pen pressure instead of my way of drawing. In Adobe Photoshop CC, it works perfectly fine. Why is this happening and how can I solve this problem?

  A line for every time I press. It is the only blue because that's the color of pen, I had chosen. This happens with the pencil tool and the Brush tool. I happen to run two monitors. Flash is open on the right monitor but I tried to swap around, drop down to a monitor, and it doesn't seem to change. I don't know if this is specific to my tablet or a problem with the program.

  

  It seems that there is a split second after the contact where it does not read my travels before putting in the left straight down.

  

  

  In Flash CS6, there seems to be a similar problem. When I press down, the first point shows but it stops to record the pressure down almost instantly even if I continue upward with the pen pressure. He holds the State pressed down but is not to follow the movement. With my mouse, I can then move around to draw the path, but it is not picking up the pen.

  

  Post edited by: Christopher Navarre

  Post edited by: Christopher Navarre 11:14 August 26, 2015

  In Flash CS3, it goes the same way as Flash CS5.5 where appears a point, it will not save the press which took place or release of the pen tip. If I move the mouse after pressing the pen, I can drag it around the same way. The problem seems to be that flash is not just reading presses pen continues but I don't know how to fix it. In other programs, it seems to work very well (Paint, Photoshop, etc.)

  Another thing I discovered is that if I have another program that is not selected in the active window flash but try to draw in flash using the Brush tool and then he reacts appropriately, but the second I drop the brush stroke and let Flash CC 2015 be the active window again it does not recognize my movements.

  I think it might be a simple driver issue.

  ANSWER:

  There seems to be a bug in the driver Turcom code. If you disconnect a monitor then you can normally draw in flash. What happens with two monitors, it's that the pen cursor position instantly repositioned correctly when you press down. Because I was drawing on my right monitor, it tended to be left (maybe because thought Flash that I worked on monitor 1 or something).

  I have an e-ticket with Turcom as a permanent solution, but for now, simply using a monitor works fine.

• Save the problem!

  I had a problem with the registration of the fla file in Flash CC.

  I edited my code-> Ctrl + s for save-> ctrl + enter for build-> close the swf file-> close the fla file-> re - open the file saved in fla-> my edited code disappears

  Here is my code:

  -Before editing: count = Number (getTimer () - startTime)

  -Once edited: count = totalTime - Number (getTimer () - startTime)

  After registration and reopen-> it displays as before slot management .

  It is not happen all the time, but it is really critical with these minor changes. Does anyone get the same problem?

  the problem I see with a flash document is the same as the one I described for a canvas document and has the same alternatives.  the best workaround is:

  1 change (add, delete, or modify) something onstage. (you can immediately cancel your changes, then save).
  

• Is it possible to reinstall photoshop CS6, to solve the problems?

  Is it possible to reinstall photoshop CS6, to solve the problems?

  I use a MacBook Pro with Yosemite 10.10.5. Since I updated to Yosemite, I have some problems with certain tools in PS CS6.

  I already reset PS, but it was not useful. Now I want to reinstall PS (this is a version of the student).

  Student versions can be installed on 2 computers. Will be that reinstall it affects it?

  When you uninstall, use the cleaning tool use the Adobe Creative Cloud cleaning tool to solve installation problems

  Configuration files are sometimes ignored and corrupt which means the problem is still there to reinstall.

  Use disk utility to check your Volume and run a permissions repair, then install.

  Gene OSX 10.10.5

• Firefox freezes - icon flashing task bar - seems the problems with flash - reinstalled both

  Using firefox 31.0 and uses the latest version of flash

  Often when visiting places such as youtube - firefox hangs with the firefox icon will blink in the taskbar - I have no open windows and it's a newish windows machine 7 - have reinstalled the two fire Fox and flash and still have the issue.

  Help / advice would be much appreciated

  Hello

  Some problems with Flash video playback can be resolved by disabling hardware acceleration in Flash Player settings. (See this article for more information on using the Flash plugin in Firefox).

  To turn off hardware acceleration in Flash Player:

  1. Go to the Adobe Flash Player help page.
  2. Right-click on the Flash Player logo on this page.
  3. Click settings on the shortcut menu. The Adobe Flash Player settings screen opens.
  4. Click the icon in the lower left of the Adobe Flash Player settings window to open the display panel.
     
     

     

  5. Remove the enable hardware accelerationcheck box.
  6. Click close to close the Adobe Flash Player settings window.
  7. Restart Firefox.

  This Flash Player help - display settings page contains more information about the Flash Player hardware acceleration, if you are interested.

  Does this solve the problem? Let us know.

• Monitor the problem flashing on the reactivation of the computer.

  Monitor the problem flashing on the reactivation of the computer.

  I have a new HP laptop G60 - 243 CL of Costco and a new HP W2207h monitor. The screen flashes when the laptop wakes fashion "sleep" with the HDMI cable connected. It works very well with the VGA cable. Any assistance in finding the cause would be much appreciated. Here is my hardware spes and a newspaper detailed observations.

  Thanks in advance,

  Paul

  --

  HP W2207h monitor

  680 x 1050 hz @60

  Laptop:

  HP G60 - 243 CL

  AMD Turion X 2 RM - 72 2.1 GHz

  3 GB RAM DDR2

  320 GB SATA, 5400 RPM HARD DRIVE,

  NVIDIA GeForce 8200 M G, with up to 1407 MB total graphics memory (shared).

  16 "16:9 1366 x 768 display

  Drive x drive LightScribe 8 with support double layer
  HDMI

  Here is my log.

  25/01/09

  1 unpack the monitor. With mobile connection cables on: HDMI, USB, power Turn on the monitor. It flashes. Black for about 2 seconds, then the light for a split second, repeat, ongoing. Turn off monitor, the driver of the CD W2207h monitor, restart. Monitor works normally.

  The monitor HP w2207h Readme says driver using driver Nvidia 10.65 or later version.

  The Control Panel on the computer laptop G60, NVIDIA GeForce 8200 M g: Device driver 7.15.11.7614, 11/07/2008 (this is the latest driver from the HP support page. See on 27-01-08 below).

  Install W2207h Monitor driver CD and restart the computer. Control Panel, device, Manager I see two monitors, the two "monitor PNP generic", first Hardware ID "MONITOR\HWP26A8", the second "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  2 put the laptop into sleep mode. Wake the portable computer and monitor flashes market, as described in (1). Image appears normally while the monitor is turned on for fraction of a second intervals. If reboot laptop, follow the work properly.

  Occasionally, flashing monitor heal without rebooting. Out of about 10-15 tent: once the monitor began to function properly while the computer shuts down. Once the monitor was OK on the reactivation of the laptop. Once, while the screen flashes, I removed the USB cable and the monitor started working. None of this is repeatable.

  3 removed the HDMI cable and started using the VGA cable and an audio cable. No more flashing on the reactivation of the computer. Very repeatable. About 7 7 times.

  01/26/09

  Control Panel, two monitors, Device Manager, the two "monitor PNP generic," first of all we have the Hardware ID "MONITOR\HWP26A8", second is "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  27/01/08

  Download NVIDIA drivers

  Downloaded from Nvidia support: Version 179,28, 2008-12-18, 179.28_notebook_winvista_32bit_beta.exe Beta (attention: are not supported by the laptop to the manufacturer.)

  HP support: Version 7.15.11.7614 has, 2008-09-08, sp40385.exe (same version that is installed.

  Version of the driver installed is the same that the one on HP support site, so did not not update driver.

  w2207h monitor download driver

  Download and install A Rev 2.0, 4.0.100.1189, 2008-10-16

  Version of the file now reads 6.0.6001.18000 (longhorn_rtm.080118 - 1840), I think it's the same as the driver already installed.

  Flashing problem is unchanged.

  –

  end

  It was the monitor! I brought my laptop and a HDMI cable at Staples where I bought the monitor and tried on the w2207h on set. It has worked well. Took the phone in and out of fashion 'sleep' several times. I'm in the store week return policy 2 stables will replace it. The seller was very accomodating to let me try different monitors with HDMI and VGA cables and my laptop while I was there. I even brought in a large piece of cardboard to protect the ceiling :).

• Installation problems using the .img download Microsoft Action Pack on DVD for Windows 2012 Server Standard x 64

  I tried to install Windows Server Standard edition 2012 x 64 who got burned on the delivery of download Microsoft Action Pack DVD.  Download of the ISO image is a file .img, site Web de Microsoft Action Pack.  I have downloaded several times and burned each image on a DVD.

  When I try to install Windows Server 2012, after that select install, I get a pop-up message indicating, "a media computer driver needs is missing."  It could be a driver DVD, USB or HDD.  If you have a CD, DVD or USB flash drive with the driver on this subject, please insert it now. »

  However, I don't know which driver it needs.  During my tests I initially wanted to install Windows Server 2012 on our VMware ESXi v5.1 environment, but got this error.  I then tried to install it on a physical server that I am able to install Windows Server 2008 x 64 and Windows 8 Pro on without no additional driver needed.  The system's hard drive is a standard IDE 120 GB drive and the DVD drive is an IDE drive as well.

  I called Microsoft Action Pack support and they wanted me to pay for support to get this resolved, which I do not think that I would have to evaluate the software at this point.  They guarantee me that the download available for Action Pack Subscription holders is the necessary "correct".img file.

  I also downloaded the eval FREE for Windows Server 2012 version, but not what I need for my tests.  This download version is a .iso file real vs file .img but won't install Windows Server 2012 Standard Evaluation (Server Core Installation), (with a GUI server) or data center evaluation edition.  This version will install, but isn't what I need and is very limited in functionality.

  Someone else has had problems like this with the Microsoft Action Pack Windows Server 2012 Standard multimedia software installation process and found a solution to this?

  THX.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• The problem "your current security settings do not allow this action" when I want to open the swf file in Windows Media Player.

  How to solve the problem when I want to open the swf file in windows media player? There, half year, when I click on a swf file, it could automatically play in Windows Media Player.

  Now when I want to open a SWF with Windows Media Player, it pops up a window "your current security settings do not allow this action".

  How to use watch the video in Windows Media Player swf?

  Hello

  SWF is a file format for multimedia, vector graphics and Action Script in the Adobe Flash environment. Origin with future Wave Software, then transferred to Macromedia and then coming under the control of Adobe, SWF files can contain animations or applets of varying degrees of interactivity and function.

  SWF functions as the dominant vector "animation" on the Web for graphics display format. It can also be used for programs, games by browser commonly, using ActionScript.

  Method 1:

  I suggest open he file in Internet Explorer and check to see if you encounter the same problem.

  Method 2:

  Step 1:

  You can also try reinstalling Flash Player on the system to fix the problem.

  To uninstall a program in Windows 7 refer to the link below

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

  Step 2:

  Once you uninstall Flash Player reinstall rear and check to see if you encounter the same issue.
  To download the latest version of Flash player refer to the link below

  http://get.Adobe.com/flashplayer/

  Once you download Flash Player see the link below to install a program downloaded in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• Emergency aid the problem of adobe flash cs4 animation

  I am working currently on the amimation project, after that I am referring to:

  
  

  http://www.pixelhivedesign.com/Tutorials/Flash+matrix+-+animated+code+effect/

  
  

  and successfully make an animated background matrix, then the problem, some object or symbol or animation I put on the background will automatically become 'transparent', who can see the word matrix pass through it, I am completely newbie on this software and any help is welcome

  BTW, I use adobe flash cs4
  

  You must manually create an empty movieclip and place it on the stage in the upper left corner on a background layer of the main timeline.  Then, assign it an instance name of "backgroundMC" This movieclip is where the code will place all the matrix elements to be created.

  To create an empty movieclip, in the toolbar at the top of the page, select Insert-> new symbol-> Movieclip... assign a symbol name as "Virgin mc" or something so that you know what it is to return to the main document choose edition--> the main Document, and then drag a copy of the new movieclip to the upper-left corner of the stage.

  When it is still selected, assign it an instance name "backgroundMC" in the properties panel, where it says "" (you can name it what you want, but I'm just using background MC for this example to work.

  If you did this correctly, the matrix will be limited now to be in this context movieclip and you can place another object above it in the other layers.

• Plugin Adobe Flash keeps crashing, and or refreshing it or Firefox solves the problem.

  I tried to update Adobe Flash and reload also Firefox but nothing has solved the problem.

  You have already disabled the functionality of the protected mode? This feature has the security benefits, but it seems to have serious compatibility problems on some systems. There is a hidden parameter to disable; I suggest to try it for a day to see if that helps you:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered

  (C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.

  It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.

  One of your crash signatures (_SEH_prolog4) reminded me of a thread where a user was very persistent problems with Flash on YouTube if Webroot and LastPass were both installed. It seems that you run Norton, so that the thread is probably not directly relevant.

  Would you consider trying the "Extended Support Release" of Flash version instead of the version 18? Adobe is now updated with security patches, but some recently added features Flash would be absent.

  If you want to try this, you will need to use Adobe uninstaller to remove the current version (link in: Flash Plugin - keep up-to-date and solve problems) and then get version 13.0.0.309 from this page (scroll down about 2/3 of the way):

  https://www.Adobe.com/products/flashplayer/distribution3.html

  Choose the EXE or MSI for 'plugin browsers.