HP Deskjet 1015

Similar Questions

• DeskJet 1015 of the driver installation is not open

  Printers: Deskjet 1015

  OS: OSX 10.9.3 Mavericks (Macbook air 11 inches, mid-2012)

  Hello.

  I just bought Deskjet1015 and have tried to install the driver that I downloaded from here .

  Given that my OS is OSX 10.9.3, I followed the instructions in this article .

  My problem is that install driver named "HP Deskjet 1010 series' in file image with the same name doesn't open, even with 'the touch' and clicking on 'open '.

  Here is the screenshot when you try to open it.

  

  Help, please!

  Welcome to the Hirocg forums,

  I saw your message about your installation with your Deskjet Mavericks 1015 problem. I have some suggestions that might help!

  1 try again to download and save the file to your desktop and run it from there to see if it works.

  2. If #1 fails, try to repair disk permissions and try the installation again.

  Good luck!

• HP deskjet 1015, do not install it

  Nice day.

  Have problems with HP Deskjet 1015. System can not detect the printer.

  I already read topics about the problems with this model, so.

  (1) Pic.1 printer is connected correctly, but the installation program does not respond to this topic.

  

  (2) HP Print and doctor Scan does not detect printer as well.

  (3) printer worked on win XP, after the migration to win 7 system cannot detect.

  (4) in USB devices listed as "unknown device".

  Waiting for help!

  Hello @Skatuser and welcome to the Forums of HP, I hope you enjoy your experience!

  I see you are having problems installing USB.  I would like to help.

  I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I would recommend also following USB Printer Installation troubleshooting.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP deskjet 1015: My Hp deskjet 1015 prints word documents, but not of PDF files

  I just bought a new Hp deskjet all in a single 1015. It can print word documents, but not file... PDF .Please help

  Hi @AmalTalaat and welcome to the Forums of HP!

  I see you are having problems printing of PDF files.  I would like to help!

  I suggest you perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I recommend also to download and run the HP print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP deskjet 1015 will not work on windows 10

  Hi I have recently updated my Windows Windows 8 to 10. I also downloaded the new driver (but really not sure if this driver is for Windows 10). And now my printer cannot be detected by my laptop. Pls help thanks

  The software complete solution includes everything you need to install and use your HP printer. This collection of software includes all of the drivers, the installation program and optional software.

  File name: DJ1010_188.exe

  Alternatively, the HP printer install wizard for Windows was created to help Windows 7, Windows 8/8.1, and 10 Windows users download and install the most recent and most appropriate HP software solution for their HP printer.
  
  Simply run the tool and follow the on-screen instructions.

  File name: HPPIW.exe

• DeskJet 1015: deskjet 1015 does not print envelopes

  When using Word 2013 and I go to the envelope printing feature, the printer does not print the envelope.  I had no problem before printing envelopes, but the issue has been observed only yesterday, I don't know it's because I've upgraded to Windows 10.

  Pleased to meet you @rawlemars,

  I see that you try us feature envelopes in Microsoft Word, and I may have some information for you.

  You can check your settings by using this support document; Print an envelope.

  Did you that your computer has all its windows updates?  How can I tell if my computer is up to date?

  You can try fix the Office application.

  You could also join Microsoft on the Microsoft community to see if there are any suggestions.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Deskjet Ink Advantage 1015: a4 paper print problem

  Hello!

  I have a HP Deskjet Ink Advantage 1015. The problem is that when I print using A4 size paper, printing (text/image) will be resized to fit in a size letter paper. But if I print on a legal (8.5x14) size or custom size paper (8.5x13), printing will not be reduced.

  I don't know what is the issue and I hope that someone can help me since our office uses the format A4.

  Thank you!

  @tadz731
  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand correctly the printer prints the customer size and legal size as it should be, but resizes printing A4 to letter size.
  Don't worry because I have a few steps to solve this problem.

  Although the header can contain a different printer name, the article should solve the problem
  Please click here for details.

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• hp deskjet 990cse printer driver

  I have an old HP Deskjet 990cse printer which needs a new driver.  I've recently updated for MacOS Sierra, and now the printer does not work.  I can't find an updated driver on the HP site.  Disappointment because the printer still works fine.

  Someone at - it a similar problem?

  Thank you.

  I managed to make it work.  I went into system preferences and deleted and then added the printer.  He now uses a generic driver.

• Deskjet 710/720/810/820/1000 Series printers - Patch for 64 bit Vista and Windows 7

  There is a problem with the 64-bit, Vista, Windows 7 and Windows 8 or 8.1 drivers which causes the spooler crash with the following HP Deskjet printers:

  DeskJet 710

  DeskJet 712

  DeskJet 720

  DeskJet 722

  DeskJet 810

  DeskJet 812

  Deskjet 820

  DeskJet 822

  DeskJet 1000

  The attachment contains a fix for this problem for Vista and Windows 7.

  [The patch does not work for Windows 8, 8.1, or 10 x 64 systems.  There are efforts to this address, if a solution is developed it will be shown here.  [{Edit - I did not progress by getting the patch to run in Windows 8 x 64.}]

  First of all make sure that the driver for the installed printer.  If the driver has not been installed go to start devices and printers, add printer, the local printer, choose the appropriate port (for the converters, USB-parallel, the port likely USB001: or maybe USB002 :), then click Windows Update then choose HP for the manufacturer and select the appropriate printer.)

  Apply the patch as follows: log in to the computer with an administrator account.  Download the patch by clicking on this link or on the trombone at the end of this post.  Save the hotfix on your computer, then unzip it.  Then, copy the three DLL files in the following directory: %windir%\system32\spool\drivers\x64\3

  Note that %windir%\System32 is a system variable that points to the location of the Windows directory. For most systems it will be C:\Windows.  You can click Start, computer, and type %windir%\system32\spool\drivers\x64\3 in the address bar and it is in the right place.

  This can be done from a DOS command prompt if BACK is opened with the "run as Administrator" command or to explore with a copy and paste.  Depending on your UAC settings, you may need to provide confirmation.  Also allow existing files to be replaced if you are prompted.

  This patch is not necessary and should not be applied to a 32-bit version of Vista or Windows 7.

  Thanks to extraordinary Microsoft engineer Alan Morris forguidelines for patch.

  Update - here is that of the more detailed installation instructions:

  Download the patch on the DJ_Patch.zip at the bottom of the page and save it on your computer.  Now click on the file and open it, and then extract the fix in a directory that is easy to find. (I use c:\temp. If this directory does not exist you can create it as follows: open the administrative BACK prompts by clicking Start, all programs, accessories, and then right-click on CMD. EXE and select run as administrator. Click in the DOS window, and then type the following command:

  MD c:\temp

  CD \temp

  Now extract the patch files in the c:\temp directory (all, extract c:\temp chose as a destination).

  [Update - Windows security settings can prevent these files from being used, please open computer, type c:\temp in the address bar and then right click on each of the dll files and select Properties.]  If there is a message indicating the properties file has been downloaded from the internet and can be blocked and then unlock the file before continuing.]

  Then, click back to the administrative DOS prompt and type the following: (the green stuff are comments, do not type them...)

  *. DLL DIR (just to check that the files are there, it should list hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll and perhaps others).

  Net stop spooler (ensures that the files are not in use.)

  Copy hpvdb720.dll C:\windows\system32\spool\drivers\x64\3 (this is for the Deskjet 710/712/720/722)

  Copy hpvdb820.dll c:\windows\system32\spool\drivers\x64\3 (this covers the Deskjet 820 and 822)

  Hpwm5db1.dll c:\windows\system32\spool\drivers\x64\3(this covers the Deskjet 1000 copy)

  NET Start Spooler

  Output

  [Edit - note that these DLL files will already be in the directory.  You will get a warning asking if it's OK to replace the files, say "Yes".]

  At this point, the patch is installed and ready to print.

  Note that here printers do not support USB connections, they have only the parallel ports. [Edit - if your printer has a parallel port to use, it will be probably much less problematic than the use of a converter USB / parallel].   If you use a make you converter USB / parallel it is supported in your operating system.  The following messages are reported by cables USB-parallel that are supposed to work in Windows 7.   A driver is required for the converter USB / parallel besides the driver of the printer.  For converters supported, it is usually provided automatically in Windows 7.  Note: the appropriate to select for USB-parallel converter port is often USB001:.  I've heard of cases where the port was USB002: or LPT3: as well.  If the port you are using is unable (after applying the fix) try to change the port by going to start, devices and printers, right-click on your printer and select printer properties, then click the Ports tab.

  Mick4 wrote: the problem is that I only could unzip the 3 dll files but don't know how to replace the bad dll files. Mick 4

  If you use Windows 7 do the following: log in as a user with the administrater properties.  [The following assumes that you are using IE as your browser] Click on the here link and select "Save".   Once the download is complete, select "Open folder", then right-click on the DJ_patch.zip file and select extract all.   If extract all is not an option, then click on "Open with" and select Windows Explorer.

  

  Leave the default directory and check the box "Show extracted files when you are finished", excerpt.   Click Start, computer, and type % windir%\system32\spool\drivers\x64\3.  Arrange the windows so that you can access the two parts of the window.  Go in the first pane and select the three files dll, hpvdb720.dll, hpvdb820.dll and hpwm5db1.dll.  Now drag and drop them to the % windir%\system32\spool\drivers\x64\3 window, select copy and answer to 'replace' in the dialog box.

  Note: %windir%\System32 is a system variable that points to the Windows directory.  For most systems it will be C:\Windows, but it can vary depending on the configuration of NDO of hardware configuration of the computer.  If you type %windir%\SysWoW64\cmd.exe in the address bar in Explorer or in start, search programs and files, it will find the right directory.

• HP deskjet 3540 series (D142AF: print validation error)

  I am trying to print from my computer hp laptop on my wireless printer and I got valedating of the printer... Please can you help me now?

  Welcome to the HP Forums!
  I hope you're well @denden2-_bé

  I read about the error you see when you try to print from your system from Windows 7 to your Deskjet 3540, and I hope to help.

  Please try using Print and doctor Scan for Windows to help troubleshoot printer problems

  If the tool does not help, try to print from other programs, uninstall and reinstall the printer.

  If the problem persists, let me know the details.

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Have a nice day

• HP Deskjet 2640 Jet advantage: printing without margins

  I would like to know if it is possible to print borderless with the advantage of Jet HP printer jet 2640 engineering.
  If possible, I would like to know how to set up the printer for such an impression.
  Thanks for the help

  Hello

  Your ptintrt doed does not support borderless printing. Full stop. The best you can get for border is round 3.2 mm for L & r 1.5 mm for Top and 14.5 mm for the bottom.

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-2640-all-in-one-printer-series/5357278/document/c03802179/

  Kind regards.

• HP Deskjet 3512 e-all-in-one Deskjet of HP P: 3512 e-all-in-one printer does not "standby mode"

  Printer will not wake from sleep mode.

  It has a static IP address. Works very well once he wakes up to the top. Doctor of Scan cannot even find it when he's asleep. 2 computers on home network have the same problems. Is there a way to disable the mode 'sleep'?

  Hi @tedd1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 3512 does not wake from sleep mode. I'm happy to help with this problem!

  Please make sure that the auto power off feature is not turned on. As when it is off, you manually turn on the printer after 2 hours.

  Automatic stop function

• DeskJet F2180 + Vista 64-bit

  Hello

  I am currently in the situation that I need to print something, in the case of witch, I decided to use a HP Deskjet F2180 I had laying around. I use Windows Vista Ultimate 64-bit so I thought I was good off to download this file. Appearently that was not the case. It fails during step 3 of 4 of the installation process.

  The error States:

  SourceFile was not "C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\Toolbox\Toolbox1030.cab".

  And then it pops up with another error, a word on ""C:\users\***\AppData\Local\Temp\7zSA5E7.tmp\setup\hpzmsi01.exe " "

  Then it analyzes the log, and this is what is said:

  Error code: 193060200

  Now Launching = x: \hpzmsi01.exe - aioproduct_min l - XXX the list f
  X:\DIVins?. DAT
  Error message received: Sourcefile not found: X:\Toolbox1030.cab
  Make sure that the file exists and that you have access to it. -I am sure that I run the installer as administrator and I have access

  X:\Toolbox.msi failed with return code 1603
  MSIInstall() failed with 1603 for MSI Toolbox
  Exit code = 1603

  I hope that's enough for you give me a way to fix this detailed

  Sincere greetings

  its

  Message edited by its on 2008-11-23 14:46

  Try to download the software from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-64285-1 & LC = on & DLC = in & CC = US & Product = 3177562 & os = 2100 & lang = in

  Save your desktop and run it from there...

  Keep us abreast of the concerns

• DeskJet 3632: Installing the software with the IPad

  Hi all, I just bought a deskjet 3632, I do not have a PC or laptop, so I can't install the software on the disk.

  I have an iPad,

  Please could you guide me through the steps of the installation (if possible) I've done a major boo boo, I bought the HP1512, not even give it a second thought that it would not be wireless.

  Thanks in advance

  Kee

  Hi kee,.

  Download and use the HP AiO Printer application to set up your printer on your wireless network If you have router:

  http://support.HP.com/RS-en/document/c03561640

  Open the app and click Add a new printer, and then follow the instructions on the screen.

  Note: f you can't find the name of the printer with the "setup" from the list of WiFi from your iPad, reset the printer settings by pressing on and now the buttons cancel and wireless on your printer for 3 seconds, then turn on the printer and make sure the WiFi switch on the printer flashes, otherwise press the WiFi button, and it starts flashing.

  Then follow the steps in the article to print and scan, so you can use AirPrint to print from your iPad:

  http://support.HP.com/us-en/document/c02623193

  If you have a router, connect directly to the printer using WiFi Direct, as shown below:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-4510-e-all-in-one-printer-series/5285997/model/5383027/document/c04090221/

  If you need to find the WiFi Direct password, press the Information (i) and the WiFi Direct () buttons to print a sheet with WiFi Direct name and the password, the same steps apply to print using AirPrint and scan using HP AIO remote.

  Kind regards

  Shlomi

• HP DESKJET 3545 e all-in-one: I want to know that what type of ink cartridge of contains in HP deskjet 3545 e ink advantage all-in-one

  ink used in the cartridge (dye or Pigment)

  Hello

  HP Deskjet Ink Advantaje 3545 uses cartridges HP 650 as example (or a different number of ink for different regions) - so that the black ink is pigment-based, the tricolor ink is tinted.

  Kind regards

  Shlomi