The relationship between workstation and domain fails approval

Similar Questions

• I get the message "Trust relationship between workstation and domain fails" on various computers on the domain, without warning or reason.

  I re - clone the machine to get rid of the problem, but can someone help me with what is the cause?

  7 Windows operating system on computers, Windows Server 2008 R2 for the server.

  As I said, it will happen without cause. We have a lot of laptops, it will affect one at random and it is not the same every time. In addition, it may be coincidental, but it seems to only affect laptop computers and laptops, desktop PC, which is connected with an RJ45 adapter No.

  Hello

  The question that you are running in suitable for the forum on the link below.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope it will be useful.

• What are the relationship between JPA and Hibernate, JPA and TopLink?

  What are the relationship between JPA and Hibernate, JPA and TopLink?
  Can APP instead of Hibernate and TopLink?

  The Java Persistence API (JPA) is the persistence of mapping relational object
  standard for Java. Hibernate and TopLink provide a Java Open source object-relational mapping framework.
  They provide an implementation for the Java Persistence API. In my opinion, Hibernate and TopLink support JPA
  and they can also be seen as complementary to APP.

  We will wait to see the opinions of the other person.

• How to set the time between workstations and Server 2008 R2

  Hello world

  I have problem with my Server 2008 R2

  all the workstations on my company doesn't synchronize the time on the domain controller

  I tried many ways to set up automatic synchronization via command prompt (Net time) and its does not work

  Please help me configure the time between the DC and the workstations

  Thank you

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• What is the relationship between gl_aloc_inp and gmf_xla_extract_headers?

  Hi experts,

  In the configuration of ALS, I want to use a custom source to get an account based in the code to a form of cost Allocation Maintenance award, but I can't determine the link between transaction_id (gmf_xla_extract_headers) and which column from table source.

  Please help me or give me a hint. Thank you very much.

  Best regards

  Cong

  Resolved in

  Pre-processor accounting OPM (Doc ID 1353054.1) debugging scripts

• architecture of the relationship between R and Oracl

  If I know, this will be the great success for Oracle. architecture of connection between oracle and R.
  R customer send it is SQL for Oracle server and Oracle perform the function of ore itself and send the results to R on the client. as ore.lm
  for other R packages as SNA, IGraph, Data mining in R code sending R Oracle to on server R and R on server run and send to Oracle. Oracle, send them to r. He connect through a single port and is secure. IS TRUE MY WRITING?
  
  I have another question. If we R 2 or more on the server, how oracle identifies correct R? for example, I install R2.13 and R2.15 on the server.
  tanks for your attention
  
  Published by: Nasiri Mahdi on 24 February 2013 22:42

  Nguyen,

  Architecture of ore, take a look at [url http://www.oracle.com/technetwork/database/options/advanced-analytics/r-enterprise/ore-trng1-gettingstarted-1501628.pdf] the first presentation in our learning of the R series.

  For your second question. ORE will use R who we found during installation. The installer will display the value of R_HOME before it proceeds with the installation. In general 1.3 ore we recommend R 2.15.1 and ORE 1.1 - R 2.13.1.

  Denis

• On the relationship between PDAnnot and fieldwork

  My application creates a lot of annots (subtype 'Widget', under the root/Pages/children/Annots.) successfully, but it does nothing on the fields (those under Root/AcroForm).

  Is there some high level coding to remedy the deciciency? Should I have the create/replicate the fields a Cos object at the same time? What is the order of the material of the fields?

  TIA,

  -RFH

  You don't replicate on-just refer to them.

• What are the relationships between the logging and IKM?

  What is the best method to use in the following scenario:
  I have about 20 tables with the large amount of data sources.
  I need to create interfaces that join the source tables in target tables.
  The tables are inserted every few seconds with about hundreds of thousands lines.
  There may be a gap of a few seconds between the insertion of different tables that could be attached.
  The source and target tables are on the same Oracle instance and schema.
  I want to understand the role of: 'Logging CDC' and "IKM - incremental" and
  How can I use it in my script?
  In general, what are the relationships between "Logging" and 'IKM '?
  Use both? Or maybe it's better deelte and insert the target tables?
  
  I want to understand what is the role of "Logging CDC"?
  Can 'IKM - incremental' work without "logging"?
  Must 'Logging' have PK on the tables?
  What should I do if I can't say PK (there may be several identical lines)?
  
  Yael thanks in advance

  user604062 wrote:
  Hello
  Thanks for your quick response!

  No probs - its still fresh in memory I did a major project on this topic last year (400 tables, millions of lines per day (inserts, updates, deletes), sup-5 minute latency). The problem is it isn't that well written on the web, that you have read the blog of the example I linked to in my first answer? See also here: http://odiexperts.com/changed-data-capture-cdc/

  Always on logging:
  My source table is inserted all the time.
  The interface to join the source table in the target table.

  In ODI, the correct term would be your source table "fits" in the table target, unless you mean literally that want to join the the source with the taget table table? My question if you want to do with the result of the join?

  What exactly the "journaling" CDC updates?
  It updates the model of ODI? interfaces? The source of data in the model of ODI? The target table?

  Logging CDC configures and deploys the data capture mechanism (Triggers or log based capture, IE Logminer/streams/Goldengate) - it is not updated the model as such, she pointed out the metadata of the model of ODI repositoty as a CDC data store, allowing you, the developer say ODI to use log data if you wish (reported in the interface) There is no change in the target table, you get an indicator of metadata (IND_UPD) against a line during the integration (in C$ and I have tables$) that tells you if its insertion (I) and update (U) or deletion (D). It had ' lines allow you to synchronize the deletions, but yoy say its inserts only then you probably used use this option. "
  So the only changes are the source table to your interface, another diary data (if you use logging) or the table of the actual source (if not using the logging).

  This is the main thing that I don't understand!

  I hope I made a little clearer.

  Try the following as a quick test:

  Reverse a source table an engineer and the target (at least) table.
  Import the update incremental LKM and IKM.
  Import of the JKM you want to use.

  Create an interface between the source and the target without any deployed JKM.
  Configure the options of JKM on the model, the "Start log" to start the process of capture - this is quite a complex stage and a lot of things to understand what is happening in the source database, better to check code ODI sends to the database and to review the documentation of Oracle database for a description of what his weight (instantiate Tables (, sets of creating change, creation of subscribers etc. establishment of newspaper groups, creating views Journalising etc.) -you will need to consult your Source DBA database initially as ODI wants to make many changes to the source DB (in mode Archivelog process max, parallelism, size, Java etc.)

  Now, edit your interface and mark the table source for use "Journalized data bank.
  Restart your interface
  Compare the difference in the generated code in the journal of the operator, see the differences of the operator.

  >

  Thank you, Yael

• Firefox is responsible for the liaison between eBay and Paypal failure?

  It's the third time recently that the link between eBay and Paypal failed. On each point, I tried to buy it, the "Pay now" button is, I click on it... and I'm 'time Out' ed. Over and over again. No matter if I click on the page of the article, MY EBay or "purchase history". The previous two points got finally adjusted and eBay implied that sellers had forgotten to complete a sequence to an end, I don't think. I have no trouble paying with Paypal on other sites and there is money in the account that you use to pay for. On the pages of 'Time Out' going up, it is suggested that Firefox may be responsible for somehow, so in desperation to this third moment of the break, I thought I'd ask, if I can hardly believe that it has nothing to do with you. If you can help, please do?

  Hi, just a guess here, but try to disable McAfee WebAdvisor in your extensions (Ctrl + Shift + A).

  If it is not, remove any reference to eBay and Paypal, as described under the heading "How to remove a single website to my story?" in this article - delete navigation, search and download history on Firefox, then try again (not related to an old favorite). Note: It may take a few minutes to complete the removal.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you!

• Relationship between users and roles OID

  Hi team,

  We have created users and roles in the IOM and the synchronization of these OID values. Users and roles create under different containers in OID.

  We have the relationship between users and roles of the IOM. How the relationship between users and roles are maintained in the OID.

  Could you please help me on this. Thanks in advance.

  Thank you and best regards,

  Narasimha Rao

  For 11 GR 2 IOM, roles map to the OID groups if there is a ldap synchronization (between IOM and the OID). I know that it works for IOM 11.1.2.2 and OID 11.1.1.7 (also 11.1.1.6 OID as well).

  Between the IOM and the OID ldap synchronization will automatically synchronize users of IOM in OID. So if you add a user to the IOM it will come in OID under the users container.  You create the role of IOM, you should see a group created under the OID. Similarly, if you add users to the IOM for a role of IOM, it will map/synchronization user in OID OID group.

  (Hope this helps, please indicate your answer as answered if it solved your query)

• Relationship between db_flashback_retention_target and fast_recovery_area

  Hi all
  
  I was doing a test on Flashback Database on my Oracle 11 g 2 and I would like to seek clarification on the relationship between db_flashback_retention_target and fast_recovery_area. Here is my current settings:
  
  
  SQL > show parameter db_flashback_retention
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  db_flashback_retention_target integer 60
  
  
  SQL > show parameter recovery_file_dest
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  db_recovery_file_dest string L:\app\amosleeyp\fast_recovery
  _area
  whole large db_recovery_file_dest_size 20G
  
  
  That is the question. I know that the db_flashback_retention_target parameter specifies the upper limit (in minutes) to how far back in time, the database can be flashed to the rear. I did a test and this is the sequence of events.
  
  REMOVE FROM SCOTT. EMP WHERE ename = 'KING '. -* 12:13
  FLASHBACK DATABASE IN TIME = ' TO_DATE ('2013-03-25 12:12 ',' YYYY-MM-DD HH24:MI:SS') "; -* 13:30
  Select count (*) Scott. EMP where ename = 'KING '. -* 13:31
  
  COUNT (*)
  ----------
  1
  
  This simple test, I have the database of flashback to more than 60 minutes there despite my window of retention being set at 60 minutes. That's the reason that I have a huge 20 G db_recovery_file_dest_size? So I can't go back in time for more than 60 minutes? Thanks for sharing.

  Hello

  So you mean that the target of retention may be about 59,60, 61minutes or more depending on the space of fast_recovery_area? So it actually fluctuates? ~

  No, it does not fluctuate. fast_recovery_area is just a storage area for versatile use for backup, backup, archived redo logs, and flashback logs etc, so do not confuse with retention of flashback.
  retention of flashback time is time that Oracle will always ensure you the flashback database. If set to 60 minutes, then you will certainly be able to flashback your database at least 60 minutes.
  If your fast recovery area is free, Oracle will not remove the flashback logs (and you might be able to flashback to even several days if flashback logs have not been removed from the quick recovery area). It removes only the flashback logs if fast recovery area a little space left in it.

  Only when I put guaranteed restore points, then it will store always on 60 minutes?

  See below for this concept

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/flashdb.htm#autoId8

  Salman

• Relationship between Per_all_people_f and fnd_user

  Hi frntz,
  Can I know the query of the relationship between Per_all_people_f and fnd_user.
  
  Thanks in advance

  What that has to do with SQL and PL/SQL?

  Please post to the right forum, which I think is one of the applications oracle ones.

• The trust relationship between this workstation primary domain failed

  During log on, I am faced with an error "of the trust relationship between this workstation primary domain failed. If I disconnect the connection to the local network, then I lon on. What is the permanent solution easily?

  Hi Laurent,.

  This error message can occur if the computer is not connected to the same domain (or is connected to a working group) which is connected to the server computer (or the field on which is connected to the computer that is running Active Directory). Additional assistance can be provided the forum TechNet Service directory.

  "The relationship between this workstation and the primary domain failed approval" error on a computer that is running Windows 7 or Windows Server 2008 R2

  https://support.Microsoft.com/kb/2914474/en-us?WA=wsignin1.0

  You can post the question on the TechNet link below.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverDS

  Let us know if you need assistance on our part.

• relationship bewteen workstation and the primary domain failed

  cannot connect to the workstation. has received the message from "trust relationship bewteen workstation and primary domain failed.

  Tried spruced up user and domain name and still get message

  Tried to use the user name and the name of the local computer and cannot logiin

  repressive restoration of a restore because of virus date

  This is because for domain authentication, s-channel is used. It is a password and a key attached to your machine account that renews every 30 days.

  You will need to connect using the local administrator and you ungroup, and then join the domain.

  This happens whenever you restore a backup at least 30 days or older.

• Explain the relationship between libraries, albums and photos in pictures.  Where are the images stored?

  Looking for info on the relationship between libraries, albums and photos in the Photos app.  I can create several libraries containing photos and unique albums.  Can I put the same photo in libraries and the different albums?  By making a copy it creates a link to the original or a new photo?  Where are located the photo files?  When scanning photo to my Mac Pro files are placed in a folder structure, copy these photos in an album Photos using the original file or he places a copy in a database?

  Bottomline, I'm frustrated by the method of collection, the albums, the place and date.  I want store related photos in a separate album.   Example: A library for a family, containing albums of members of their family. Maybe the photos have duplicate in different albums.

  Some of your questions are answered by Leonie contributor in this thread:

  Re: Too many libraries...

  More answers can be found by using help in Photos app, or in general to help the Viewer.

  Apple Support website has links to information in articles; a search on the web is sometimes useful

  to locate the Apple pages faster than the company's site. Others in line include:

  Photos for OS X FAQ:

  http://www.IMore.com/photos-OS-x-FAQ

  How to use the Photos for OS x:

  http://www.IMore.com/how-use-photos-OS-x-ultimate-guide

  Good luck!