The render after timeout period value

Similar Questions

• USB 3.0 Port at random times out the error "semaphore timeout period has expired.

  My USB 3.0 port randomly shuts down completely. I sometimes get a message that says "the semaphore timeout period has expired." I disabled USB selective suspend and verified that the port is functional (Device Manager) and even used my drive hard/USB stick/mouse wireless mouse in the regular USB 2.0 ports. 2.0 ports both products I work very well. Moreover, the stop device, is not related to the volume or type of media, that I'm going through. Yes, any driver alone on my computer is 100% up-to-date (from validation). How can I change this? I feel that I lost all the money on my new USB 3.0 hard drive.

  Windows 7, 64-bit.

  I also had the same problem and host controller Renesas usb3.

  I went to the site intel and downloaded this driver

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=19880&lang=eng

  My driver usb3 was updated according to Microsoft and Lenovo.

  Former pilot was 2.0.32.0 according to Lenovo.

  My external drive USB3 now works correctly and not cut or hang PCs.

  No help on Microsoft or Lenovo websites regarding this issue, but it is a HUGE problem.

• HP OfficeJet 6500 (not wireless) times out on the network after various periods of inactivity

  Hello

  As the subject says, I have a HP 6500 from JO that will expire after a random period of inactivity on the network.  It will not respond to print jobs, pings, http for its Web page requests, or scan nmap.  Stop/restart the printer temporarily resolves the issue until it times out again.  I think it is not related to drivers, because there is no need of drivers installed on a machine on the network.  Anyone has any idea on what this could be?  Has anyone experience this problem?  I have no history of problems of auto-negotiation on my network (I am dealing with devices at work who do not play nice with auto-negotiation, and the only option for them was to put it to manual), but just in case, I changed the setting manually set to 100 Mbps Full.  Having just done this, I do not have yet to see if this changes what anyone, but I want to see if someone else has all possible solutions.

  Thank you.

  It seems that the static IP address has been resolved - it has not yet expired since I put it.  It seems that he fixed - lease DHCP renewal seems to give this printer problems.

• In case of failure of the computer virtual to define the topology of the display after a period of inactivity

  Hello, we are facing a problem with a small subset of our VM here full clones, Windows 7 workstations. We are connecting via Wyse P25 zero with firmware 4.1.2 customers. From time to time (not always, not always) the virtual machine will give a black screen after the user returns for time away from their office. When this happens, we see data such as the following in the PCoIP server log.

  15/10/2013, 13:26:19.827 > LVL:0 RC: 0 SERVER: == > WindowProc: event detected WM_DISPLAYCHANGE (1920 x 1200)

  15/10/2013, 13:26:21.576 > LVL:1 RC :-500 IMG_FRONTEND: set_display_topology: VMwareResolutionSet_SetDisplayTopology failed (result of topology = 0).

  15/10/2013, 13:26:21.578 > RC LVL:2: 0 IMG_FRONTEND: display device [0]: \\.\DISPLAY1 (VMware SVGA 3D)

  15/10/2013, 13:26:21.578 > RC LVL:2: 0 IMG_FRONTEND: display device [0]: States - DISPLAY_DEVICE_ATTACHED_TO_DESKTOP DISPLAY_DEVICE_ACTIVE DISPLAY_DEVICE_PRIMARY_DEVICE

  15/10/2013, 13:26:21.580 > RC LVL:2: 0 IMG_FRONTEND: display device [1]: \\.\DISPLAY2 (VMware SVGA 3D)

  15/10/2013, 13:26:21.580 > RC LVL:2: 0 IMG_FRONTEND: display device [1]: States - DISPLAY_DEVICE_ATTACHED_TO_DESKTOP DISPLAY_DEVICE_ACTIVE

  15/10/2013, 13:26:21.582 > RC LVL:2: 0 IMG_FRONTEND: display device [2]: \\.\DISPLAYV1 (JSDLP chained DD)

  15/10/2013, 13:26:21.582 > RC LVL:2: 0 IMG_FRONTEND: display device [2]: States - DISPLAY_DEVICE_MIRRORING_DRIVER

  15/10/2013, 13:26:21.584 > RC LVL:2: 0 IMG_FRONTEND: display device [3]: \\.\DISPLAYV2 (RDP Encoder Mirror Driver)

  15/10/2013, 13:26:21.585 > RC LVL:2: 0 IMG_FRONTEND: display device [3]: States - DISPLAY_DEVICE_MIRRORING_DRIVER

  15/10/2013, 13:26:21.586 > RC LVL:2: 0 IMG_FRONTEND: display device [4]: \\.\DISPLAYV3 (RDP reflector Display Driver)

  15/10/2013, 13:26:21.586 > RC LVL:2: 0 IMG_FRONTEND: display device [4]: States - DISPLAY_DEVICE_MIRRORING_DRIVER

  15/10/2013, 13:26:21.591 > LVL:2 RC :-500 IMG_FRONTEND: process_display_topology: Failed - 2 requested screens, 4 remaining trials.

  15/10/2013, 13:26:21.591 > LVL:0 RC: IMG_FRONTEND 3: open_displays(): display processed topology request: failed.

  15/10/2013, 13:26:21.946 > LVL:0 RC: IMG_FRONTEND 0: resync_windows_topology: new api called successfully

  15/10/2013, 13:26:21.946 > LVL:0 RC: IMG_FRONTEND 0: configure_displays: 4 views presented initially!

  15/10/2013, 13:26:21.946 > LVL:0 RC :-500 IMG_FRONTEND: configure_displays: warning - poster overlap: [LRTB]: [1920,3839, 0.1199] X [1920,3839, 0.1199]

  15/10/2013, 13:26:21.948 > LVL:0 RC: 0 SERVER: == > WindowProc: event detected WM_DISPLAYCHANGE (1920 x 1200)

  15/10/2013, 13:26:21.954 > LVL:0 RC: IMG_FRONTEND 0: resync_windows_topology: new api called successfully

  15/10/2013, 13:26:21.954 > LVL:0 RC :-500 IMG_FRONTEND: open_displays(): can't set screens, devtap reset.

  15/10/2013, 13:26:21.963 > LVL:0 RC: IMG_FRONTEND 0: resync_windows_topology: new api called successfully

  15/10/2013, 13:26:21.963 > RC LVL:3: 0 IMG_FRONTEND: reset_devtap: SVGADevTap reset

  15/10/2013, 13:26:21.963 > LVL:0 RC: MGMT_IMG-500: cSW_HOST_IPC::enable_frontend failed. 10 remaining attempts. Try again...

  15/10/2013, 13:26:21.963 > LVL:0 RC: 0 SERVER: == > WindowProc: event detected WM_DISPLAYCHANGE (1920 x 1200)

  15/10/2013, 13:26:21.976 > LVL:0 RC: IMG_FRONTEND 0: resync_windows_topology: new api called successfully

  15/10/2013, 13:26:21.981 > LVL:2 RC: 0 SERVER: Desktop power: EVENT_SYSTEM_DESKTOPSWITCH

  15/10/2013, 13:26:22.963 > LVL:0 RC: 0 IMG_FRONTEND: Calling open the display mode Tera2.

  15/10/2013, 13:26:23.562 > LVL:0 RC: 0 SERVER: == > WindowProc: event detected WM_DISPLAYCHANGE (1920 x 1200)

  15/10/2013, 13:26:23.881 > RC LVL:1: 0 IMG_FRONTEND: set_display_topology: VMwareResolutionSet_SetDisplayTopology succeeded (topology result = 1).

  15/10/2013, 13:26:23.881 > LVL:0 RC: 1 IMG_FRONTEND: open_displays(): display processed application topology: with success.

  15/10/2013, 13:26:23.884 > LVL:0 RC: IMG_FRONTEND 0: resync_windows_topology: new api called successfully

  15/10/2013, 13:26:23.884 > LVL:0 RC: IMG_FRONTEND 0: configure_displays: 4 views presented initially!

  15/10/2013, 13:26:23.884 > LVL:0 RC :-500 IMG_FRONTEND: configure_displays: warning - poster overlap: [LRTB]: [1920,3839, 0.1199] X [1920,3839, 0.1199]

  15/10/2013, 13:26:23.885 > LVL:0 RC: 0 SERVER: == > WindowProc: event detected WM_DISPLAYCHANGE (1920 x 1200)

  15/10/2013, 13:26:23.887 > LVL:0 RC: IMG_FRONTEND 0: resync_windows_topology: new api called successfully

  15/10/2013, 13:26:23.887 > LVL:0 RC :-500 IMG_FRONTEND: open_displays(): can't set screens, devtap reset.

  15/10/2013, 13:26:23.891 > LVL:0 RC: IMG_FRONTEND 0: resync_windows_topology: new api called successfully

  15/10/2013, 13:26:23.891 > RC LVL:3: 0 IMG_FRONTEND: reset_devtap: SVGADevTap reset

  15/10/2013, 13:26:23.891 > LVL:0 RC: MGMT_IMG-500: cSW_HOST_IPC::enable_frontend failed. 9 remaining attempts. Try again...

  15/10/2013, 13:26:24.891 > LVL:0 RC: 0 IMG_FRONTEND: Calling open the display mode Tera2.

  15/10/2013, 13:26:24.954 > LVL:0 RC: IMG_FRONTEND 0: configure_displays: 4 views presented initially!

  15/10/2013, 13:26:24.954 > LVL:0 RC :-500 IMG_FRONTEND: configure_displays: warning - poster overlap: [LRTB]: [1920,3839, 0.1199] X [1920,3839, 0.1199]

  and so on...

  On end-user behavior, is that they get a black screen, followed by a gap. View Connection Manager console reports as "connected". We have to reset their virtual machine or restart from vSphere in order to get them reconnected. We found a VMware KB here which indicated that it was a result of the computer, put the display to sleep (in power politics), so we put in place a group policy to configure this 'never' (said also the problem was resolved after view 5.0, while we are running 5.2). Issue still occurred. Recently, Teradici support (we have a case open with them as well as with VMware) suggested that disable us the accelerator of Shoretel desktop sharing, so we tried it. Problem occurred again today.

  So, no matter who in the community never encountered this and could you remedy this? Our users are extremely frustrated.

  We believe that we have solved this problem. It was related to client connections on the zero P25 and who monitor they were trendy. So if a user has his left monitor the value primary (as per normal), but the port number a display on the zero client goes to the right screen, then the 'primary' switching must occur in the software somewhere along the way. This leads to the poster of overlapping and sometimes, not every time the VM would fail to fix and would be left in a State where we had to reset it from the vSphere client. As we exchanged the range of cables to make sure that zero client a monitor port is connected to the main screen of users, this issue appeared (two weeks and counting, fingers...). We have a few users who prefer the right monitor being their main, so we put the cables in front of them.

• Cannot open the software after trial period has expired and I paid for a 1 year plan

  I use windows 10 and you have finished my trial period for indesign and photoshop. I then proceeded to pay it for the plan one year to have these programs and followed the steps that were sent to me to activate the software. Now, when I try to open either indesign or photoshop, I told myself my trial period is over and I need to buy the product. Can anyone help?

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• cancel the deployment or suspend VMs after a period of inactivity?

  In Lab Manager 4.0, is it possible to cancel the deployment or suspend the VMs after a period of inactivity? For example, if I want to have the VMS undeploy or suspend it after a user has not used for an hour or two?

  Thank you.

  is the closest you will get to this is a lease of deployment:

  The duration of a configuration or a VM template is deployed before Lab Manager is supposed to he cancel the deployment.

  This is because Lab Manager is not on 'activity or inactivity' as far as I remember, just how long he was out on an ESX host to.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Error 0 x 80070079: the semaphore timeout period has expired.

  Original title: error 0 x 80070079: the semaphore timeout period has expired.
  

  An unexpected error prevented the operation. "and the error code" error 0 x 80070079: the semaphore timeout period has expired. ".

  I have this message when I try to copy a file of 1.6 GB on an 8GB SanDisk SDHC card

  I tried to format the card, but it will be only quick format. I've tried NTSC and FAT32, but it does the same thing.

  I have Windows Vista Home Premium, 32-bit system

  Hi bumbed.

  You have active wireless network?

  There are many suggestions that fixed the issue of which two are listed below:

  O change router security

  Ø change setting antivirus/firewall

  Method 1: Change the router security setting.

  Router change of WPA - PSK (WiFi Protected Access, pre-shared Key) at Wired Equivalent Privacy (WEP). This seems to have contributed to this point.

  For more information about these security features, read:What are the different wireless network security methods?

  For more information on how to change the setting, see your router's manual or contact the manufacturer of the router.

  Method 2: Disable your firewall/antivirus

  Disable security software such as antivirus/firewalls see if it interferes with the transfer for test purposes.

  For more information about this issue, see:error 0 x 80070079: the semaphore timeout period has expired

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo

• A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  Hello

  I get the below error message while my windows application inserts data in SQL Server.

  A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  I use LINQ-to-SQL.  SQL Server is installed on Windows server 2003.

  We are using SQL server 2008 r2.

  When we insert large data base records, approximately 1 million we get this question.

  Please suggest.

  Hello

  When you use Windows server, we ask you to send the query in the link depending on whether they are the experts.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Thank you.

• How to activate Windows after the 3-day grace period?

  HOW TO ACTIVATE WINDOWS AFTER PRESCRIBED PERIOD AGAIN?

  I forgot to activate my windows again after only three days in advance?

  I use a dial connection using a USB plug. It's SmartBro, location Philippines. My number is * removed *.

  I could not activate using the internet because I couldn't connect my dial-up access. I got a prompt to automatically connect bur that he had failed.

  I don't have a landline.

  I tried the phone activation. I got yhis installation ID:

  Can I have the confirmation through your answer ID? Give your could give me, this activates my windows again, even without an internet connection yet.

  Without this activation, I couldn't connect to internet...

  My activation key is: * delete *.

  Currently, I'm in a café of inet, I would be grateful if you could give me a solution to my problem.

  My email is: * address email is removed from the privacy * or * address email is removed from the privacy *

  Hoping for your quick response.

  Thnak you.

  Chris Maypa

  Hello

  Check out the link and follow the steps.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• What is happening on your pc after the expiry of the "trial of activation period" of 30 days without activating it?

  I am hving problems with the installation of Windows XP Professional. I was not able to get any help yet in this forum to reformat my HARD drive in order to reinstall the operating system. What I want to know with this issue, this is what will happen to my PC after the end of the 30 day trial period and I hv not "active"? I guess I'll hv access to my bios but not the operating system. Will be my boot mgr restored b (it has "disappeared" from the bios when I tried to do the installation of the OS)? The operating system will still try to prevent me from doing a reformatting the drive HARD in preventing me from creating diskettes; I need to do a reformat with Seagate Diskwizard or via a command 'format' floppy worldwide BACK?  Also concerning 'activation '; Pc shud be built entirely (with all its components installed) before activation or can some components b added later... I put, t want to add my Creative Labs audio card and printer until after everthing else has updated drivers, etc.. ???  I read several of the MS solutions on "activating" HT, but none seem to answer these questions. Thanks for any help that can b gave me. Neil 70yroldnewbie

  Hi 70yroldnewbie,

  Thanks for posting. If you're using a genuine Windows, you can activate at any time when activation is up. If it cannot activate online, use the telephone option. The reprocutions of activation would not be some windows features will be locked down. You will always be able to boot, reinstall, backup files and other functions.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• desktop PC: after certain period of time reduced the brightness of the screen - cannot turn off

  Win 7 64 bit

  AMD hd 6870 connected via HDMI pn59d500 samsung plasma tv

  What is going on:

  If I am reading an article or by typing in a comment like this box, the screen turns off after a certain period of time.

  -mouse mobile, typing, scrolling window or motion/movement of the window (like firefox) on the desktop does not work for normal brightness screen.

  -resizing of the window will be brighten screen (also by clicking on the Start button or start another application or similar activities).

  What I've done and additional info:

  -My hdtv eco settings and and autobrightness are all off. I don't have the problem with other components related to this view. This is not the problem of the screen

  -my desktop pc power settings are not set to reduce brightness at any time. I even disabled the «turn off the display after...» "option. Anyway, same problem. I have the computer put to sleep after 20 minutes.

  -a ran the troubleshooting of windows power - I know how to click and read. There is nothing outside of the obvious and already known.

  As-i crossed all the parameters of the CCC (the suite software amd vid card). the only color/quality setting I use is deinterlacing with drop-down auto-detection. pixel format is set to RGB 4:4:4 limited. I have active treatment of ITC (will try not disabled, no idea what it affects). I use manual detection of displays... no setting under "desktop management", "my digital flat screens", and "video" seems to do anythign with dimming screen.

  I read through the first 5 pages of the "Sun Office" search results here... no related response.

  just thought to google the registry entries related to power... but always options this issue. I'll look into registry changes after.

  Hello

  Please update us on the issue. Office is different from the laptop, and because the screen is dimming as it does in a laptop, it is related to the power settings or the driver itself. These are the only two things that are responsible for the same in a laptop as well.

  Therefore, I recommend you try to create a new power plan or change the existing one to check. You can also refer to:

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Let us know the results when you try these methods.

  Thank you

• Desktop Windows 7 goes black after a period of inactivity and the user accesses their machine again

  Hello

  Wonder if anyone can offer help for an unusual problem?

  Users have Windows 7 machines that all have a background theme to display... Blue with a company Logo.

  User's for lunch and leave their posts after a period of time and/or powersaver screensaver comes in... all normal at this stage.

  After an hour, they return to their machine and they move the mouse/tap a key and bring the machine back (excuse my terminology :)) and the office went from the default theme for a black desktop computer... Icons/Applications behave very well.

  The temporary workaround is:

  1. open a session and on windows to restore the office back to normal.

  or...

  2. I do a restart of the "Desktop window Manager Session Manager" service that puts the office back to normal as well.

  Has anyone seen cela and worked a way how to make a permanent fix... have struggled on Google because the answers I find are around the screen savers that ISN'T the problem.

  See you soon,.

  Steve

  Hi Steve,.

  Thank you for the update. However, since these computers are connected to the domain, your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• On Windows 7, how to implementing automatic uppercase the first letter of the first book and the first letter after each period?

  I'm using Windows 7, how do I configure my system automatically capitalized the first letter of the first word and the first letter after each period?

  Thank you

  Lisa.

  Hello Lisa,.

  It's more to do with the word processor on Windows. You don't say what word processing software you use. If you use WordPad which comes free with Windows, it is impossible to do what you want to do. However, if you are using Microsoft Office Word (that you can buy) then the CAP is set by default.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com