The rendering is really useful?

Similar Questions

• The rendering is really slow on my new rMBP

  Hello world!

  So I bought a new MacBook Pro of the retina with the following specifications: Intel Core i7, 8 GB of Ram, 256 SSD HD and NVIDIA GT 650 m 1 GB

  This is the first time I have a powerful machine and during the rendering of a twixtor animation in AE, rendered goes pretty slowly. I mean it ' s a laptop from £2000 with pretty good record, should not faster? In any case, I can accept this question to a certain level.

  But if I did slide my original clip in my composition (without any changes/effects applied) and try to scroll to see where to begin my effects, it does not play the video at its original fps. Is this normal?

  Are there software options I can choose to push for better performance?

  eatChocolat wrote:

  I'm just really supprised AE cant read a clip to its orignal speed setting when well even the clip has not been changed

  This is because you are pregnant AE behaves as a non-linear editing - which he isn't. A NLE is specifically designed for playback of a video stream. After Effects (and flame, Fusion, Shake, etc) all pixel-based image processing applications that behave very much like Photoshop. They calculate the values of each pixel in each image, came up with a new pixel and then read the pixels.

  AE and other applications of pixel-based composition, always work internally with the completely uncompressed pixel data. NLE relies on codecs, compression and, in some cases, hardware, playback of the video.

  This is a very simplified version of what's going on under the hood, but I hope it makes sense.

  There is some more information about the preview here.

• How to change the rendering used for video playback in Windows Media Center Version 6 engine

  I usually use other media players, but I would like to first of all using Windows Media Center. However for the moment video playback is not good because of the weird colors (everything is displayed in black and Red instead of normal colors). When you use other media players, I use the Haali rendering engine which gives good results for video playback.

  Can you tell me how to change the rendering used by Windows Media Center?

  Also, I noticed the same weird color effect in Windows Media Player 11.

  Hi Woobee,

  1. What is the brand and model of the computer?

  2. what graphics card use on the computer?

  If you are using an Nvidia graphics card on the computer, in the Nvidia Desktop Manager, you will find an option for saturation to ensure it is set to 100%.

  And if you are any other graphics card on the computer and search for a similar option for saturation.

  If the previous step fails in Windows media player, so be sure that the hue and Saturation are defined by default.

  1. click on the arrow on the tabplaying , point to enhancements, and then clickcolor picker.

  2. do one of the following:

  1. to return to the default color, click thereset link.

  Also, make sure that the video settings are set by default.

  1. start the playback of a file.

  2. click on the arrow on the tabplaying , point to improvements, and then clickvideo settings.

  3. click onreset.

  Check also in Windows Media Center if the

  1. on theStart screen, go to tasks, click settings, clickgeneral, then Visual and sound effects.

  2. undercolors ensure that Windows media center standard is enabled.

  Turn off Visual and sound effects in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-Visual-and-sound-effects-in-Windows-Media-Center

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to cancel my subscription to Adobe? I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  I am charged every month and I do not really use it enough to justify. I followed the instructions of tine for how to cancel at least, but it does not give me the "Cancel" button to click.

  Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

• Dear Sir/Madam I am writing about the suite Adobe Creative License peripheral non-profit in January of this year, we bought. It's been almost four months and we still have to successfully download the software on the computer, so we can really use it.

  Dear Sir/Madam

  I write about more Adobe non-profit instrument allowed Creative, we bought in January this year. It's been almost four months and we still have to successfully download the software on the computer, so we can really use it. It is completely UN acceptable. Despite many attempts and chat sessions with several of your support staff. We lost hours and hours of our precious time trying to get a working to our computer installation. The computer is a newer version than MacBook Pro bought new in January 2015. It's a sad testament to the stability of your SW if you can't creative SW runs on a Mac. I am confused with what I can do about it. Your Tech support staff clearly didn't have the knowledge to fix and the SW is defective and unusable. Is the problem of the license of the device? We can get this as another form. The last chat with one of our staff asked an email address to at least try to get additional contacts for help, but technology chat session refused to give their address. Four different Tech tried different solutions without success. What to do next? Please consult the transcript of what has past and let us know how to proceed. We are a non-profit organization. Our time and money is valuable to us. We want the use of the software that we paid for. We need a solution to this.

  Walter Wilson\

  Executive Director

  Hopesprings Corporation

  [email protected]

  It's our number of VIP

  Hopesprings Corporation

  07C5DAE501894FE5C0DA
  Date of renewal: February 10, 2016

  Try the chat support - for the still need help, click the link below? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)
  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• Retail price displayed only if the item is in stock by using the rendering engine liquid?

  Is there anyone who knows the liquid rendering engine? Customer Meluka.co.nz wish the price of sale displayed only if the item is in stock. LiveChat advised that this can be implemented using the rendering engine liquid if the stock is greater or equal to a sale price (reduced price) will be displayed. If no product in stock, the retail price is displayed. The announcement is tomorrow's paper so that the pressure is on--helps the developer urgently required please!

  Each product - large currently:

  < ul >

  < div id = "{tag_productid} rrpprice_" >

  < h10 > {tag_retailprice} < / h10 >

  < / div >

  < class li = 'price' > < {tag_saleprice} fort > < h9 >(inc. GST) < / h9 > < / strong > < /li >

  < class li 'quantity' = >

  Amount of < p5 >: < / p5 >

  {tag_addtocartinputfield} < /li >

  < class li = "instock-message instock-{tag_instock}" >

  < div >

  < p5 > in Stock: < / p5 >

  < p2 > please allow 2-3 days (plus delivery) < / p2 >

  < / div >

  < div class = "stock" >

  < p5 > made to order: < / p5 >

  < p2 > please allow 4-6 weeks for manufacturing (plus delivery) < / p2 >

  < / div >

  < /li >

  < br / >

  < class li 'quantity' = > {tag_addtocart, < img alt = "" src="/images/btn-add-cart.gif" / > "} < /li >

  < /ul >

  Of course

  You see where I am getting-"Can you do that for me for free" - I cringe.

  But its simple. Liquid you have if statements...

  http://docs.BusinessCatalyst.com/dev-assets/reference#! / liquid-reference/reference/logic-t ags.html

  And you have your liquid tags:

  The developer reference

  {% If isOnSale is true-%}

  TO DO THIS

  {%-%}

  DO THIS

  {endif %}

  You should check that the old tag returns 0 or 1 and the liquid must be good true or false, but do not know where BC got too much consistency yet, they have been quite on the updates recently. If this does not work with == true, then it will be == 1

• Problem with the rendering of the image in Photoshop CC2015

  Hi, I just bought PC especially for the Photoshop works (usually use Mac) and I have a serious problem with image rendering powered by the device driver (nvidia GTX980). Lines and other parts of my design are strongly serrated (it looks like the poor antialiasing) - even in an excerpt from 1:1 (100%), so it's really invisible before. Could you look at my screenshot and try to understand what is happening? In this State, it is totally useless to my job (I am perfect pixel). Help, please.

  On the screen:

  1 - view 300% of the severely affected hardware rendering (screenshot of view 100%) - on the left you see the battery icon?

  2. right - 300% view showing how it should look like in real life.

  

  OK, I just found the solution. It's pretty simple and obvious in some respects if PS is using OpenGL as a main renderer, setting 3D graphics card will have a significant impact. Sailing... I just need to disable antialiasting FXAA in NVidia Control Panel. Now everything looks good as is.

  Problem solved.

• (CPU overheating) Are there specific settings I should change before the rendering in Adobe Premiere?

  

  I chose a really small rendering option that my old laptop could return without overheating, so I was wondering if I hurt something else?

  Here are the specs of my computer (the one I'm trying to make with the screenshot):

  The high air 922 Cooler master cases, 3 fans and cable management that does not interfere with the air flow.
  

  Motherboard ASUS Maximus VII Ranger

  Core i7 4790 k (currently with the cpu comes with the processor fan)

  16 GB of ram

  NVIDIA GTX 970

  120GB SSD (to run windows)
  1 TB HD (for my files and programs)

  Windows 7 64 bit

  Care of my old laptop (that I used for rendering HD videos with it): And cpu would not go more than 60 ° C, but was using first 2.0 or something
  

  ASUS laptop
  

  Quad Core

  NVIDIA GT 240M

  500 GB HD

  Windows 7 64 bit

  With these render settings, my computer's CPU overheating 98 C, just as it begins rendering, he quickly degenerate, which at this stage, I cancel the rendering.

  I tried to see if other things would be couse of overheating as work on a 8 GB on photoshop file. It consumes all the ram, but the temperature of the cpu are not going more than 70 C.

  Is it possible he might just be the processor fan is not not able to bear the cpu with this kind of tasks? Or is it a setting I am missing that is eaten all 8 cores of CPU?

  I think that the cpu fan is running as it should be with an average of 1 140 RPM.

  If anyone has an idea of what is happening, please let me know. And please read this first!

  Slow down time that the CPU is fine and not thermal burn which would be the single CPU based question that pushes the heat very quickly outside the high heat sink. You must replace this cooler. The stocks for the Intel CPU heat sinks are really poor.

  Eric

  ADK

• Ray-Tracing on GPUS requires a graphics NVIDIA and CUDA 5.0 or later approved. For now, the ray-tracing will use the CPU.

  I just got my Macbook Pro w / retina delivered today 15 ".

  I installed CC After Effects and received this warning message:

  Ray-Tracing on GPUS requires a graphics NVIDIA and CUDA 5.0 or later approved.

  For now, the ray-tracing will use the CPU.

  After installing CUDA 5.0 or later, restart your computer.

  For more information, see: http://www.Adobe.com/go/aeraytracedgpu

  
  

  My mac spec is:

  Processor: 2.8 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Graphics card: AMD Radeon R9 M370X 2048 MB

  -

  I have absolutely no idea what the implications are for the AMD graphics card instead of the NVIDIA one card, no one knows what effect this will have on my mac when you use CC After Effects? I've never had this warning on my iMac 21.5 "...

  Is there something I can do?

  Thank you very much, Harry.

  The only thing THAT AE really use the GPU is obsolete ray-traced rendering engine. Very few people use the ray-traced rendering engine. I wouldn't worry about this at all.

  More info here: features GPU (CUDA, OpenGL) in After Effects and here: http://motionworks.net/after-effects-3d-future/

  Now, some third-party plugins (like element, 3D Invigorator, transmutation, etc..) Make use of the GPU, but they will work with the AMD cards and have nothing to do with this warning of CUDA, you want to come. Check that the requirements for all you plan to buy.

  You can confidently check the option do not show this message.

• Texturing the model of the project with the high texture layer of the page crashes the rendering queue

  Hello. I am trying to add an overall texture to the model of the whole project by adding a jpg with texture to the top of my diapers and affecting the overlay mode. However, when I try to exit out of the queue to render in format .mov, it hangs and will not be rendered. I use CS6 AE. 64 GB of RAM. Any help would be appreciated on how best to add an overall texture, if this isn't going to work. Thank you!

  

  I'm not really sure what version of AE, you're running; I'll guess CS6.  It is up-to-date, as in version 11.0.4?

  I see that you do NOT multiprocessing, which is good.

  And just as a workaround - just to get the project to the door - you could always rendering on the comp in a lossless codec, then just put the overlay on the imported file, recently visited a new comp.

• To reset the rendering limit to adapt automatically to the whole work area

  Hi friends

  I guess that it is a very basic command. My dad works with first to edit movies from birthdays and the weedings.

  But I do know it does or where it supports on the area of work... the rendering (highlithed in my picture) leave it s original position limit. So my father every time must manually drag in order to cover all the clips in the timeline.

  Sure, it might cancel the action but... My question is: is there a command that he could use for this come back and set the limit of rendering to automatically adjust the entire query in the timeline (the default behavior)?

  Thank you much for the help

  Best regards

  Gustavo.

  Jim is partially correct. It is certainly a heck of a lot easier and safer, to what he proposes.

  If you really want the techie answer to how to make the bar will behave once again, in the sequence where you have already, and you agree that you can't hold me responsible if you bumble, then read on...

  Step 1. Make a copy of the project file.

  Step 2. Close Premiere Pro

  Step 3. Find the copy of your project in Windows Explorer and open it with Wordpad if you're on a PC, or any Mac users allows to watch the XML code.

  Step 4. Do a search on "workbaradjusted" (without the quotes)

  Step 5. Change the 'true' to 'false' - it again and again until you have changed each sequence. Do it carefully please.

  Step 6. Save the file

  Step 7. Open the file in Premiere Pro

  TADA!

• Movement 5 quit unexpectedly in the rendering

  I use Motion 5 to create a 3D logo that is open. I took the customer logo and put it in a 4 k project. Used a Replicator to give it depth, then a camera movement to fly at the screen.  No background, just the logo and a 5 second move. He returns for a few minutes then quits. Several times. Help? Too expensive for this computer, maybe?

  If you speak a rendering of command-R (for faster playback), how many images actually get you will depend on the amount of RAM you have. Motion will attempt to make the frames as much as possible.

  You don't need a project of 4K to do a 3D text. Text is vector graphics, your project must "run" in FCPX at any resolution and always look as well. I do not recommend working in a project of 1080 but for the best screen for an asset size "workspace."  You should get 2-4 times more frames rendered by resizing to 1080. It is easy to change the size of your project (but not speed) by selecting the project 'sex' in the Inspector, select the Properties tab, then in the menu drop down preset, select Broadcast HD 1080.

  Movement can make the ProRes (422 Proxy is good enough) files of movies as fast as the rendering of command-R, so sometimes it's easier to simply create an external movie file. For every time that you make the file on the disk, just replace the same file over and over again. You can trash when you have finalized your project.

  HTH

• Just upgraded my iMac ' 09 end to 16 GB of memory and downloaded El Capitan. At the start, I can use my password very well. Then before he allows me to do anything, he wants the password in the Keychain for the 'local products' but refuses my login passwo

  Being given that I can't access anything ELSE all tips go into Keychain Access etc won't work. I tried to cancel it, but she and the other boxes of menu just POPs back up. It didn't happen when I upgraded my Mac mini to 2012. Please help me solve this problem. I need this computer to work from home, and I've updated because I was told it was compatible and it would read all of my files, Pages, and Numbers to the office where I use the Mac mini. I'm really upset that Apple wants me to pay for answering my questions, when it comes to THEIR PRODUCT! I used Apple machines since nearly 20 years and deserve better treatment!

  Connect password is not the same as the password for the keychain. Check your notes, if you have it written down somewhere. In addition, you can use your computer without any keychain. You just enter all other passwords and logins manually.

  If your Mac keeps asking for the password to keychain - Apple Support

• How to control the rendering of the tab character in a TXT file?

  When I browse a TXT file, the tab character is rendered in order to look a lot like 8 places. Is there a way to control the apparent number of spaces in the rendering? Yes, I know that things like

                 pre { tab-size: 4 }
  

  in CSS3 could control this number in the rendering of HTML elements, but I want a control similar to a TXT file.

  Or if you want to use CSS, this bookmarklet will insert the style rule on the page:

  javascript:var r="pre{-moz-tab-size:4;}"; var s=document.createElement("style"); s.type="text/css"; s.appendChild(document.createTextNode(r)); document.body.appendChild(s); void 0;
  

  (Note that at least for now, you must prefix-moz - on the size of tabs in Firefox.)

• By "delete private data", is the removal of really made history?

  Data gradually increase when I use firefox, and a response of "suppression of private data" extremely worsens.

  By "delete private data", is the removal of really made history?

  (I translated it into English in "Mail-Hon'yaku-Concierge".)

  Deletion of data? What data are you talking?