The router WRT160N supports VDSL?

Similar Questions

• When you set the IP address of the router, WRT160N Inaccessible

  Hello

  I bought a WRT160N router yesterday and eagerly tried to connect my laptop to the internet (ADSL) modem using this router. As my ADSL modem is a router DHCP too, and I want to keep it like that, I have it plugged in ethernet cable form one of my ADSL modem/router, LAN ports in one of the LAN ports on the modem, Linksys have the Linksys operating as a bridge. However when I tried to specify an address of router static IP (192.168.1.254) in the basic parameters of configuration Linksys Panel, disabled the DHCP setting and saved, I could not connect to the router more using this new IP address - my browser tells me that the Web page doesn't seem to exist, but it cannot establish a connection with her. Then I have to reset the router in order to access configuration panels using the default address 192.168.1.1. Is there a reason why I cannot access the control panels of the router with the new IP address of the router that I've specified?

  Thanks for any help,

  Hello

  the problem is resolved, be it in a different way. I tried your trick to wait 30 seconds after the registration and the recycling of the modem, but this had no effect. What helped does not change the settings for address IP Routerl and the setting from the DHCP server on the router for the disabled at the same time. If I only changed the setting to the IP address of the router and recorded, the modem has been reset automatically and starts with the new correct router address. After that I changed the setting of DHCP server to the WRTN160 to off and then I was able to get the router working, like I wanted.

  I assume that when you connect the router to a computer reset (after taking out the IP address of the computer) with DHCP from the active router, the router assigns an IP address to the computer that somehow interferes with the local IP address parameter, if you define that at the same time.

  In any case, all work now, and I have excellent signal everywhere in the House. I guess that congratulations go to me :-) but still thanks to eliminate one possible cause of the problem

  Kind regards

  Gerard

• Wireless router WRT160N cable on the desk, I loose internet when the laptop is turned off.

  I have wrt160n v2 router wireless, it does not work for me.

  If my wireless XP laptop is only powered ON the Vista desktop internet wired connection works, I'm not wired or wireless using laptop computer, not on the internet, only power.

  If the laptop is turned off, I have no internet on the desktop, always connected via the router.

  The laptop is used and I didn't know if the without built-in thread was pretty new, so I bought a card to go in wireless.

  When everything is on everything is to play on the internet times two computers, but if you turn off the laptop I have to connect internet directly on the Office to continue in the internet.

  I started working with a tech support yesterday and they are difficult to understand. I had put in the new firmware and the problems persist.

  Can someone help me, I don't really have time to be on the phone for hours figure this all out.

  Thank you

  Jackie

  go to http://audipages.com/router/ and follow the instructions

• Router WRT160N v2 lose wired connections have to restart the router, then all is well again.

  Hi all...

  I'm having some trouble with my WRT160N v2 router, now I use it only to share the internet connection between wired PC.

  I have tride (with the help of live chat) to reduce the size of the MTU to 1300, with no success, also an update of the firmware was informed, but I can't find an update for the version "v2" of the WRT160N router.

  The behavior is really funny:

  -Get random msgs "cable network is disconnected" and "local network connection is now connected".

  * plugged direct cable from my modem to the PC then there is no problem, me makes me believe cables are ok

  -Some sites don't be loading not on two PCs connected to the router, Firefox and IE8 trough during live chat, confirmed the site is up, it's as if something is stuck in the cache of the router or something that prevents some loading sites, sites that happen are random, the browser are not even a real attempt to connect but go now empty.

  -Repair windows and hollow EasyLink advisor will have no effect, Easylink advisor indicates that the connection is good when it doesn't appear, restart the router is always fix the problems (for a while)

  Modem: Comcast Cable

  Router: WRT160N v2

  PC1: XP Pro SP3 connected cable trough using Avast 4 Pro Security

  PC2: XP Pro SP3 connected hollow cable using Outpost Security Suite Pro 2009

  It's very frustrating because you can imagen, I hope someone got some clues for me on this one...

  Thanks in advance...

  Martijn greating

  It should list version 1, 2 and 3, when you go to: http://www.linksysbycisco.com/US/en/support/WRT160N/download

  Here are the instructions to DOWNGRADE the WRT160N V2, DO NOT USE this on VERSION 1 or 3, it will turn your router into a door stop!

  http://audipages.com/router/

• WRT160N v2 site blocking to the router even after reset and upgrade firmware

  For some reason any my WRT160N v2 router blocks access to the following Web site: www.cngoons.com

  I can connect on the site if I connect to the modem directly, or using the connection to the internet of someone else. However computers that connect through the router is unable to access the site via a web browser (IE, FF or Chrome), cannot ping the site, and a tracert also fails.

  I have reset the router by default, but the site is still blocked. I've upgraded to the latest firmware (WRT160Nv2_v2.0.03.009_US_code.bin) and the problem persists.

  Any ideas on what's going on?

  And after a search even more, I found this old thread dealing with the same question:

  http://homecommunity.Cisco.com/T5/wireless-routers/Linksys-router-blocked-website/TD-p/12917

  A solution is given at the end to change the MAC address of the router (I cloned MAC address of my PC), and then restart the cable modem. It worked for me!

• Linksys Router WRT160N - Wireless does not connect to the cable modem

  I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

  I have configured the router N new for

  "Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

  I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

  I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

  Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

  If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses.  If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

  If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet.  To check this, follow these steps:

  (1) Please indicate addresses that use your cameras (IE before you take the test below).  If the addresses do not begin with 192.168, then erase the last half of each address.

  (2) Please indicate your ISP

  (3) Please indicate the make and exact model of your modem (not the WRT160N) number.

  (4) Please do the following test:

  Put your entire network.  Disconnect the switch (including cameras) to the modem.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT160N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

  Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

• The router RSV4000 does support multiple public IP addresses

  I have a client who has a RSV4000 router. The customer also bought a block of 5 usable public IP addresses. I need to be able to assign these public IP addresses for printers, either by configuring a static IP address on each printer directly or through mapping of intellectual property or any other method. Made support for RSV4000 using several treats public IP and if so what configuration is required in the router for printers to be seen by the outside world.

  Hi Winston,

  Thank you for posting. The functionality you need is one-to-one NAT, who does not have the RVS4000. Please watch the RV042 or RV220W for this feature.

• What is the level of support is available for SEO URL in the latest version of JET? Is it limited by what can done JET standard router?

  We support the following formats URLS

  < Store name > /store/ / s - < the base id > -

  Ex: / store/chicago-store/s-1234.

  It seems that the standard router supports following

  / store/s - < the base id > -

  Ex: / store/s-1234.

  
  

  Please advice.
  

  When you use the JET router, there is no limit on how many 'segment' of the URL can be supported.

  Each segment is managed by a router in the child, so for a URL as /store/s -, "store name" is a child of the root (store) router, and "store" is a child of "store name" router

  Regarding SEO, JET does not provide any special support because it's something that you'd install server-side.  Since there is no 'real' to the URL /store/s -resources, you need to add some server-side code to return the base URL of initial false URLS generated by the router. This can be done using a simple rule for a rewrite, as mode_rewrite module for Apache HTTP server engine or a rewrite as UrlRewriteFilter for servlets filter. For an example of a filter of rewriting, look at http://jet.us.oracle.com/1.2.0/uiComponents-router-child.htmland click on the "Demo button to launch with adapter for URL path.

• WRT160N v3: unable to connect to the page web configuration of the router with Firefox or IE

  Whenever I try to connect to my router's admin page, I get "the connection to the server was reset while the page is loading."  This happens with FIrefox 11 and started when I upgraded to 8 or 9.  A machine running FF 3.6 does not have this problem; I get right in.  Words IE 9 is "Internet Explorer cannot display the webpage" (after complaining about the certificate has expired).

  I ran Wireshark to see if I could learn something, but everything that I could understand was:

  https handshake was OK.

  First TLS packet is received by the router, which then immediately issues a reset and the connection is interrupted.  I don't know why.

  Has anyone seen this? or I have a setup that is screwed to the top (or router)?

  Then I did a full-on reset. I had tried to get in the Mode of administration, following an article in the FAQ, but the web page came in normal mode, default 192.168.1.1. From there on, I WAS able to make the success of downloading the new firmware from 2010 (v3.0.03). Unfortunately, once I've reconfigured the box to a similar to the previous configuration, I have the same problem: connection to https://10.244.122.1 of Firefox 3.6 works; 12 Firefox (now), it will fail, get the error "reset while page is loading". My last try will just disable the https - I just discovered where I can - and see if it will work. Because it's only on my home network, if traffic to the configuration page is not encrypted it really doesn't matter that much. (I had previously determined using Wireshark happened to reset during the TLS negotiation after the HTTPS had finished). And hell, that worked. So my problem is not resolved, but it is bypassed and I'll mark it closed.,.

• Application of Router WRT160N problem loading with LELA

  Bought router WRT160N downloaded software. everything works fine with the router. but when I tried to open LELA shortcut on my desktop, I have nothing. LELA will open in the taskbar. I went to the executable files and tried to open it y fron and nothing. I went to the Vista Task Manager and looked at my running applications, and it shows an easylink icon is labled ALERT POPUP that is running. and also the Linksys Easylink Advisor running. When I finish the task for the alert popup. I can now open with the shortcut.

  hope I have not confused.

  There is something called ALERT POPUP running in background. preventing me from opening my shortcut LELA.

  Try this McKieus

  I had exactly the same problems that you described with technical support. I found this link in a post by Basiltoo on 12/15/2008. It worked for me. Previously, I had the x 86 machine error when loading the software upgrade. I have a 64 bit system. There are still a few problems with some of the options, but most of the time it works.  The link is http://update.linksys.com/autoupdate/

  I also uninstalled LELA however add remove programs and restarted before I installed the new version. On the new version, he has a place where it asks if you have a 64 bit system. If you choose the download you receive will be correct and you should not get the 'x 86' mistake.'

  He seems also to stop correctly in this new version.

  Good luck.

  It worked for me.

  BRICS

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• HTTPS access to the router does not work with Firefox 33.0

  HTTPS access to the router Linksys wrt610n has worked so that Firefox 32.0.3 the dd - wrt software of this router is self-signed certificate with the public key RSA = 512 bits (Yes, it's too short today). From Firefox 33.0 and whose 34, 35, 36-access https does not work. It is desirable to restore https behavior as in Firefox 32.0.3 (with warning and ability to do security exception). Please see the attachment with a https query result in different versions of Firefox.
  Thank you.

  Hello, make suggestions to the https://support.mozilla.org/en-US/questions/1038487 help in your case?

• Old Airport Express lost after reset of the router, the connection cannot be seen/accessed

  the train:

  -Mid 2009 Macbook Pro, OS Yosemite airport 6.3.5 10.10.5, utility

  -Existing wifi network via a former Ubiquiti AC wifi or router which gets internet radio antenna on the roof of the local ISP.

  -old (1st gen.) A1084 Airport Express used only as a customer to listen to the music of the said Macbook.

  I am a musician who has been using my old AEX to listen to the music and the recording via Airplay and Airfoil for my Roland onstage for years without problem. I don't remember how I initially put in place, but I think it's as a customer only... IE, it broadcast as its own wireless network, or extend my network wifi etc, I just use it for listening to music.

  Well, a week earlier, a disgruntled rogue ex-my local ISP hacked their radio tower and all the customer routers turned into useless bricks (and also all our wifi network names changed to a name that begins with "mother" and ends by "-ers", but that's another story).

  Local ISP technicians have managed to get my router all re - set up and working, but I had to reconfigure my wireless devices (example: wifi printer) from scratch to be able to connect again.

  The tenacious hold on is this old Airport Express.

  I try to use the instructions found online to get connected again, but nothing does.

  Yes, I tried pressing the Reset button for 10 seconds, etc... He just goes at once orange flashing or sometimes solid orange light, and don't see the Airport utility. I tried to plug its ethernet port to the router's LAN port to see if the Airport utility, would see no change, Airport utility requires no base stations found. It has no Airport icon in my menu bar and no Airplay icon in any relevant application such as iTunes.

  Remember that in past I was able to reset/reconnect after network changes, it seems to me (I don't remember how). BTW, its location is located a few feet from the router, in order to hang it up through ethernet is easy if need be.

  Once again, I only want to not to listen to the music and the tracking records of my Macbook. Roland aren't in a convenient place for an electrician. As you can tell the age of my stuff, I'm a starving musician, don't want to have to buy something new.

  Help?

  Hello lisajoy,.

  Thank you for using communities of Apple Support. I see that you are having some connection problems with your AirPort Express Terminal. You did a great job trying to get this resolved on your own! I'm happy to help you.

  To solve problems, get connected Airport please try the steps in this link:

  AirPort Express: How to join an existing Wi - Fi network in client mode

  If you connect and are experiencing problems using AirPlay and iTunes heres some more information:

  Wi - Fi base stations: how to install and configure AirPort Express for AirPlay and iTunes

  Have a fantastic day!

• Why apple card app does not show the routes and directions between two places in India in an iphone 6 s more?

  map does not show the routes and directions

  This feature is not yet supported in India.

  http://www.Apple.com/in/iOS/feature-availability/#maps-directions

  In addition, your phone may be overheating for a number of reasons. The most common of which is low service area.

  Your attributes from battery to the majority of the production of heat, then adjust settings to put less load on the farm in general will help some.

  http://www.Apple.com/batteries/maximizing-performance/#iOS

• FF 15.01 cannot access the Admin Page of the router (Netgear WNDR3700)

  I can connect to the page, the page log, and it displays all forms on each page of settings, however, the current settings are not filled and I can't make changes.

  Error console shows a bunch of error messages like:

  Timestamp: 15/09/2012 20:35:32
  Error: Exhibitor chrome JS objects to the content without __exposedProps__ is fragile and obsolete. See https://developer.mozilla.org/en/XPConnect_wrappers for more information.
  Source file: resource://jid0-lmznvk7a82o8cufhdfb9dudfa2w-at-jetpack/api-utils/lib/cuddlefish.js-> resource://jid0-lmznvk7a82o8cufhdfb9dudfa2w-at-jetpack/api-utils/lib/sandbox.js-> resource://jid0-lmznvk7a82o8cufhdfb9dudfa2w-at-jetpack/api-utils/data/worker.js
  Online: 130

  whenever I have call the page.

  I chose to activate JavaScript and Java. It seems that a worsening of the problem associated with the list and to be able to run buttons in web messaging to my Web host company, Infoquest.com (indicated for FF4. and later, never addressed bee). Each new rev of FF also seems, to increase the number of existing web pages that FF can't manage properly, especially the script-based and interactive pages such as the Hewlett Packard Support Community Forums - you can type a message to all you want, but FF will leave you not to run the 'Post' button

  NOTE: this has just started in 15 FF. Until that moment, I had 'normal' access and control of the router. Now, I have to use IE 9.

  (Win 7 64-bit, sp1)

  Hello wmcole, the error message you quoted is triggered by one of the addons that you installed - although I don't know if this is the origin of the problems on the web interface of the router. Please, try to start firefox in safe mode once and see if the problem occurs here also.

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox