Router WRT160N v2 lose wired connections have to restart the router, then all is well again.

Similar Questions

• WMP 11 says connect burner and restart the computer

  WMP 11 has just started this problem when I click on the tab burn I it tells me to connect burner and restart the computer

  Hello

  1. do you get an error message when you try to download files?
  2. you have any third-party burning software installed on your computer?
  3. do you have Internet Explorer 8 is installed on your computer?

  Follow the steps mentioned below and check if it solves the problem with Media Player:

  Method 1: Run automated troubleshooting who diagnose and fix problems with your CD or DVD drive when trying to read or burn media automatically.

  See Your CD or DVD drive cannot read or write media

  Method 2: If the problem is new, run system restore to restore the computer to a point before the problem started.

  Refer to this article for help:
  http://support.Microsoft.com/kb/306084

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Media Player says connect burner and restart the player.

  My Windows Media Player says connect burner and restart the player and I have and still get the same results

  Hello rorro1661,

  What you try to do in Windows Media Player?
  We need more information to help you:
  http://support.Microsoft.com/kb/555375
  Maybe you try to burn a CD?
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

• Media Player when I click on a vidio clip it goes full screen, the cursor will therefore not then go back to the beginning to have to restart the computer

  When I clip media player goes full-screen cursor disapeers that I then have to restart the pc to return

  Hi KenHannam,

  ·         What version of the operating system is installed on the computer?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the windows media player settings Troubleshooter.

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.

  Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?

  Hello

  
  Method 1:
  You can run the fixit. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 2:
  You can run the fix provided in the link and check out them.
  Resolve security issues to protect and secure Windows automatically
  http://support.Microsoft.com/mats/windows_security_diagnostic/
  Method 3:
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
  Method 4:
  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
  See also:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
  It will be useful.

• When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to see the monitor

  When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to be able to see the screen.  I tried all turned on and on the screen but when I do it says monitor going to sleep

  I assume you are using a desktop computer you are referring to the monitor going to sleep rather than the course of PC to sleep.

  1 check the monitor power management & the display adapter in Control Panel, Manager of peripheral and during that control you the mouse power management and make sure that it is likely to be used for anything wake up.

  2 in case of failure, then check the monitor & display settings of the adapter to control panel, display.

  3 check manual site or the monitor stand, so the settings recommended.

  4 then check the settings of the Control Panel, power options, change plan settings change advanced power settings.  In particular, if it is a USB mouse, you may disable settings settings USB, USB selective suspend setting.

• I have to restart the agent when metric collection has been disabled?

  Hello
  I got SGD 10.2.0.4 and disabled some measures. I have to restart the agent to make him stop this metric collection.
  Kind regards.
  Greg

  Greg, I think that should do the trick.
  No need to restart the agent there.
  Concerning
  Rob

• Computer loses internet connection when I leave the room

  Please can any one help on what the problem with my computer loses its connection to the internet whenever I come out of the bathroom and it does not connect to the gaming sites only for war games all educational .and thing you think it's some technical problem maggot.or piracy which is demanding.  Need your help on this kids brake into tears... help!

  Original title: philip k653

  Hi Philippe,.

  Thanks for posting your query in Microsoft Community.

  a. what operating system use?

  b. is the Internet - wired or wireless?

  c. What is the brand and model number. your computer?

  d. don't you make changes to the computer before this problem?

  We need to know the version of the OS and the type of internet connection to provide targeted assistance. In the meantime, please visit the following links and tell us the results after following the steps proposed in the support links.

  • Why can't I find a wireless network?
  • Set up a wireless router
  • Wireless and wired network problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• WLAN is disconnected and I have to restart the Satellite A205

  I've had this * Toshiba Satellite A205 Intel Core 2 Duo T5300 32 Bit Vista Home Premium computer laptop * for almost 3 years and at least once and sometimes twice a day, I have to restart find my internet connection.

  It stops just for no apparent reason. I no longer receive e-mails via Outlook and get an error page in my browser window. It is extremely frustrating because I work from home. I have Wildblue satellite internet and have had since I bought this laptop.

  I also have a desktop XP computer that accesses to the * Wildblue satellite internet * with no issues at all. This leads me to think that there is a problem with Vista and internet Satellite work together.

  Does anyone have any ideas on how I can resolve this once and for all? I really do not have to restart my computer on a daily basis or will not be disturbed while he was working on something.

  Thank you so much in advance.

  Lynne

  Hello

  If I understand correctly you message the laptop worked for troubled 3years free and Wlan issue has developed now is it right?
  Have you thought about software? I mean the fact that the operating system has not been reinstalled long and that a confused OS could cause these issues?

  But before you to reinstall all the system I would recommend checking if an update of the WLan driver would help. In addition, you should check if you are using the latest version of the BIOS.
  While this updates will not help, reinstall (update player WLan after relocation) operating system and check if the problem still persists.

  Good luck

• Media Player 11 error: "connect burner and restart the player ' when trying to burn a CD

  Original title: Media player 11 on dell e510 in XP.

  When I try to burn a cd with media player, have a message 'connect burner and restart player' and burn is dimmed.  I have a sony crx310ee internal d ' training.  Media Player will play cd but does not recognize the burner.  Was able to burn with Roxio but uninstalled trying to get media player to work.  Have you tried to update the driver, but I'm told that nobody no more recent is (over 3 years).  Removed upper and lower filters.  Have not unhooked by car and restarted.  Do you have a regedit and changed the 3 to 2 Volume guid value.    This adds the record to the properties of the drive button.  Have run convenience store and it reports the device is not a burner, which is incorrect.

  Help!

  Yes!  Think my problem is resolved.  Had ignored a suggestion to uninstall the burner and reboot.  This seems to have solved the problem since I just burn a CD using media player.

• If I unplug my charger for my laptop will stop, and then I'll I have to reset the SMC to turn back once again and I can't seem to stop the fan noise.

  My MacBook Pro retina display suddenly stop today and I had to reset the SMC to make it work again (I had a few problems with the reset it) but now, if I unplug the charger it will stop and I have to reset the SMC to run it again and I can't seem to stop the noise of the fan th What should I do?

  With the operation of MBP, if you open information system (Option key down in the Apple Menu), what does say in material > Power?

• HAV detection fails after the closure of XP Mode until I have hard restart the computer on Win 7 Pro 64.

  I am running Win 7 Pro 64 bit, and I have a number of programs that are not compatible I have to run to work.  I installed XP mode, and the XP mode is running everything is fine.  When I stopped the XP mode, however, I can't reopen the XP Mode without making a hard my computer stop, as the detection of HAV told me that my BIOS is not correctly configured (note, have not changed the BIOS settings, and I've been able to open at this point).  Soft reboots do not seem to solve this problem, so I find myself in front make full tap downs and resets in order to get my settings of the BIOS to read again.  Is this a known problem or there at - it another way, I'm supposed to close out of the XP Mode so that I can still restart it without having to go through all that?

  Windows Update has nothing to do with this problem, even if you have upgraded to Win7. Try posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• You have to restart the computer to activate the keyboard.

  Original title: keyboard problems

  I have to start my computer and then restart it to activate the keyboard. my keyboard is plugged. It has benn going on for 2-3 months. I disconnected and then reconnected everthing.

  Hi David,

  1. what type of keyboard you use? What is a PS2 or USB?

  Step 1:

  You can try to use the keyboard on another computer and check if the problem occurs. You can also use a different keyboard on your computer and check for the issue.

  Step 2:

  If you are using a usb keyboard, you can try to reinstall the usb controllers and check for the issue.

  Step 2: Uninstall all USB device manager entries

  a. Click Start and typedevmgmt.msc in start search, and then click OK. Device Manager opens.

  b. expand Bus USB controllers.

  Note: You will need to scroll down to find this point.

  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works

  Hope this information is useful.

• My printer will only print one page, then I have to restart the computer to print another

  The printer was fine since purchase, but recently, it will print a page after be on, then if I try to print a different document, he goes as far as the document taking up and looks like it's ready to print, then stops.  I tried to cancel the print job, but he will not - delete it then repeat "delete" in the print queue (but never removes it).  UN-plugging the printer is not clearly the print job.  The only way I can get to print the next thing is completely restart my computer.

  I tried to uninstall and reinstall the printer.  I put on all the latest updates for the printer... I am at a loss :(

  Does anyone have a suggestion?

  In the latest batch of updates to Windows, Microsoft has installed Internet Explorer 11. IE11 caused printer problems.

  Open Internet Explorer, click on help, then click about words of Internet Explorer. It should show the version here. If you IE11, then go to control panel, Windows Update, updates installed, look for Internet Explorer 11. Click Internet Explorer 11, uninstall.

  Restart the computer when you are prompted. Then see if your printer works.

  Rick

• Explorer crashes randomly on windows 7 64 bit. Have to restart the computer to correct.

  Hi, I read the related discussions but don't know what the problem is or how to diagnose.

  Recently, windows Explorer crashes and the only solution is to completely restart my computer.

  It will work again for a while then crash.

  Ctrl alt del doesn't show windows Explorer, so I can't turn it off.

  Surfing the internet, some people say the shell extensions are the problem and to turn them off, but they all want allows you to download the software from their Web sites to show extensions... I am wary of downloading something from someone, I don't know if have not done this.

  Not sure that the problem is... computer is completely up to date.

  I think that the problem may have begun because the last windows update but I can't be sure.

  Any help would be appreciated... can't keep turning off my computer during the day!

  Thank you

  I think I have the answer.  Has taken ALL DAY!

  Malware.

  About four months ago, I downloaded something nasty. It was very obvious that the toolbar in internet explore was changed etc.

  Immediately contacted Symantec (I have Norton Internet Security): paid $100 to remove the offender to ensure. Did not see pictures weird or redirected to websites unwanted:

  Thought I'd hired a professional and the work was well done!

  Just pay a (larger) another sum to Lenovo. They took almost four hours to determine and correct the problem and the culprit was the remains of the VERY SAME malware, buried deep! I never had the problem of a virus.

  OK now I want only a little (okay, big) RANT.

  Things seem to be working very well now. Symantec and asked for a refund. Also to check why it is not removed correctly in the first place. He said probably, I downloaded the malware even once again and they only guarantee their work for 7 days. How was I supposed to know that the pieces have been buried deep into my computer, causing havoc, that nothing was visible?

  To have Microsoft hired but Lenovo at least offer a one year support plan. Apparently, Microsoft will sell only support plans to Americans, non-Canadian (said to me on the phone when they offered the package and discovered then I lived in the Canada and withdrew the offer, would NOT take my money).

  Thanks for trying to help, they offer honest help. This rant is not directed against you.

  I am of course not at all happy at hundreds of dollars and hours spent being at the other end of the "guilty client game" the supposed expert virus (Symantec) and apparently being the Canada excludes the purchase of a paid Microsoft support plan (Americans are of course welcome to spend their money with Microsoft).