The same updates keep installation again and again.
Every time that the computer shuts down, the same updates keep installation again and again. They also create a new folder on drive C named as numbers only with the 2 files in each directory. These are difficult to remove. Previous updates of the same number succeeded. It is a bit of a pain!
Hi Papabear1001,
See the article after some troubleshooting for your question:
http://support.Microsoft.com/kb/910339
I hope this helps!
Tags: Windows
Similar Questions
-
I get the same update to install, again and again, when the original is installed at 4 or 5 times.
Hi stevie33
For the update are facing the issue?
If you have the update already installed on your computer and always offered several times the update then I suggest refer you to the Microsoft article provided below and follow the steps in resolution-
http://support.Microsoft.com/kb/910339/
I hope this helps.
-
C:\WINDOWS\Offline Web Pages
Hello
What version of the Windows operating system is installed on your computer?
I suggest you consult the steps described in the following Microsoft article and check if this may help.
Windows Update or Microsoft Update repeatedly offers the same update:
http://support.Microsoft.com/kb/910339
Hope the information is useful.
-
Why do I get the same update is keep coming for updating this kb 2538242 service pack 1 update
Thank you roy
This is because the update has failed.
It is a Ko http://support.microsoft.com/kb/2530477
But you really need to specify the err code in Windows Update > history for the update has failed.
If your PC is a large manufacturer, for example Dell/HP, you must make sure your drivers are updated since the support to the site
-
I get the same updates after installation.
Even updates too.
Hi BillMcWilliams,
Follow the troubleshooting steps in this document to resolve the issue with offered several times the same updates.
Let us know if that helps.
-
KB2604092 and 8 other updates keep installation time and again
A security update for the Microsoft.NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092) and eight others in the same way, never updated. A message appears saying that I have these updates to be downloaded and installed every day. I had the task of download and installation for about a year. I hope that someone would have a trick to solve this problem!
Original title: updates never updated.
Hello
Apologize for the delay in response. Please run the TI fix that appears in the following article, and check, if it helps:
http://support.Microsoft.com/kb/910339
You can also view the article provided for more information on fixing this problem. Back to us for assistance.
-
Why the same update keep self-install successfully every day
update of security for microsoft visual c ++ SP1 has repeatedly and successfully installed automatically from the last 60 days
Hello
Follow the steps from the link: how to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update: http://support.microsoft.com/kb/910339
-
Original title: KB 2393802 will not install and keeps back__
The windows above update keep coming back and will not be installed. If I check the update of victory it will tell me the update is available (no download, already installed on the machine), I so go ahead and install the update. About 2 or 3 minutes later the yellow flag appears indicating that KB2393802 is available. After the installation it tells me that it has been correctly installed. The event viewer also tells me it installed correctly. So far, in my history of editing, I have 32 incident KB2393802 cela being installed correctly.
Any suggestions please?
(the only thing I've done is to rename the Catroot2 folder and restart the system according to the instructions in MS for about 2 years for another machine)
Original title: KB 2393802 will not install and keeps back__
The windows above update keep coming back and will not be installed. If I check the update of victory it will tell me the update is available (no download, already installed on the machine), I so go ahead and install the update. About 2 or 3 minutes later the yellow flag appears indicating that KB2393802 is available.
Let me take you, you are under Windows XP SP3. If true, and only if it is true, the following might help you resolve the issue (which is common for all updates kernel on Windows XP computers):
KB2393802 (MS11-011) is an update of the kernel, and since these are released for Windows XP, MS is not those to install properly for years as soon as it is an OEM System (with OEM drivers) installed on which these kind of updates must be installed on.
To get these updates for Windows XP is installed correctly on these systems, you will need to download the update from download area:
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=a511d33a-9ae0-46EE-A225-9d97390de7d1
* Save * the file in a folder and run the EXE file with the parameter "/ o" (like "/ overwriteOEM"-seehttp://support.microsoft.com/kb/262841/en-us for more details on that and other parameters) subsequently.Suppose you downloaded the English version of KB2393802 in a "Downloads" folder that is located on your C: drive. In this case, please restart Windows Mode safe mode (hit the [F8] key after the BIOS screen occurred while starting your machine). Then enter the following information * including * all blanks and the signs of the quote in "Run" in the start menu and press [Enter] or click OK, then:
'C:\Downloads\WindowsXP-KB2393802-x86-ENU.exe' / o
After restarting Windows, the update should not be reaffirmed by WU/AU once again - at least after you visited Windows Update via IE and looked for new updates once more.
-
Windows Update continues to install the same update over and over again
Windows Update will continue to install the same update again and again for about a week now. He always says the update was installed successfully but in 2 minutes windows update wants to install the same update again. I went directly to Microsoft to check updates and it shows me who need the update even again in the history of the update, it shows the update installed successfully at least 10 times. Update for Microsoft security update
.NET framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708) (update 1 of 1)...
Hello
I had exactly the same problem and it resolved the response in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/security-update-for-microsoft-net-framework-4/f7c1fbbb-8c66-e011-8dfc-68b599b31bf5
Why don't give you it a try?
I hope that helps!
-
and I don't know how to find the updated info? Help! It takes 5-10 minutes every time I have shut down the computer. How to cancel this update which blocks my crt?
Thank you!
Julie
Hi jjackbcop,
Thanks for posting in the Microsoft Community.
I understand that you are facing the issue with windows updates offer several times over and over again.
Method 1:
I suggest you perform the clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow these steps to configure Windows to use a Normal startup of the link report section to return the computer to a Normal startup mode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfig and click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2:
I suggest you send the link and check (this also applies to windows XP).
Windows Update or Microsoft Update repeatedly offers the same update
-
Why am I getting the same update again and again and again
Why you continue to send me updates to install internet exp 9 when I have already installed and that you sent me the same update 8 times so far
Hello
It's not Microsoft '
These are public forums, only led by Microsoft
You can right click on the IE9 update - UAC prompt - hide
-
Creative Office Cloud | Apply the same updates, over and over again.
My CC application apply the same updates to 6 products almost every day. Even updates, same version number, exactly the same level of detail. I'm not one missing a revision.01 - they are all the same.
OS X Mavericks. Applied last CC Office today. Same question.
I really don't want to uninstall and reinstall the applications and plugins. Such things should work the box 50 PCM.
Please notify.
Hi QCM UK,
Please try the mentioned below as follows:
1. navigate to ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it.
Allow the user library: http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html.
2. activate the root account and place you ~/Library/Application Support/Adobe/AAMUpdater/1.0 and rename it.
Enable the root account: http://support.apple.com/kb/PH14281.
Launch desktop CC and let me know if still the same issue.
Kind regards
Romit Sinha
-
How can I stop auto-updates and keep UserAccounts asking if I was the same update
User accounts in W7 has no option to not be reminded about the same updates again [I won't need not and cannot use] every thirty minutes or more for a few days. If I click on Yes, I get a message saying that I don't need but 30 minutes later AU wonder again. I am a research student and I can't have important experiences, interrupted by updates in XP, I turned off and then automatic update make the updates when it is safe for me to do, but I can't find a way to do this in W7. I unchecked automatically updated in Java, Windows, Office and these programs I could access, but I still get notified.
Hello
Welcome to the Microsoft answers site.
You can try to disable automatic updates, the folloe as follows:
1. open Windows Update by clicking the Start button, all programs and then click Windows Update.
2. in the left pane, click on change settings.
3. Select the desired option.
Under recommended updates, select the include updates in downloading, installing or informs me of the box updated recommended, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Please see the link below:Activate the update or disable automatic
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off
About user accounts, please visit this link:
http://social.Microsoft.com/forums/en-us/whssoftware/thread/bedd7d54-c17a-49B2-B738-65b9b1c3b6db/You can also disable the notification from the center of the action, follow these steps:
1. click on the Start button to display the Start Menu. Then select Control Panel.
2. the Control Panel window opens now.Click on system and security of the Control Panel window.
3. the system and security of control panel section opens. Here you can see the center of the Action link.
4. click on the link the Action Center to open the Action Center window.
You can finish the first malware scan of this screen.5. click on the button scan now to open the window of Windows Defender scan
Enable / disable NotificationsNow to change the behavior of notification and enable or disable messages, the Action Center settings edit link can be used from the left pane of the window for Action Center.
From this window, change the checkboxes for messages from Action Center notification like Windows Update, Windows Firewall, Virus Protection etc. Click OK to save the settings.
Thank you and best regards,
Azam - Microsoft technical support. -
Windows Update keep repeating the same updates KB2676562 and KB270511
Original title: update for Windows XP (KB270511) security will not stop asking an installation!
Update for Windows XP (KB2676562) security and update for Windows XP (KB270511) security won't stop asking Installation, even after several installs!
Hello
Were there any changes (hardware or software) to the computer before the show?
I suggest you perform the steps mentioned in the link and checking.
Windows Update or Microsoft Update repeatedly offers the same update
http://support.Microsoft.com/kb/910339
You can run the automated FIXIT and check if this may help; If it isn't then you can perform other manual steps mentioned in the link.
Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.
You can also check:
MS12-034: Description of the update of security for Windows kernel-mode drivers: 8 may 2012
http://support.Microsoft.com/kb/2676562
Hope this helps and keep us informed if you need help.
-
installation of updates keep auto repeat the same updates although went thro necessary routine
I get updates for inputing. When I entered the updates. The message is displayed again the same updates. When ckecking the upde list the shield again appears with the same three updates. I'm going along in a circle without end! Can any body if you Please helpme. Albert.
Hi backtofront,
If you are referring to KB2633880, KB2572073 and KB251884, there was a known problem, install these updates. This problem has been resolved on 5/23. If you do not already have it, reinstall updates.
Maybe you are looking for
-
downloaded files more open automatically - I need to double click on it in the downloads window
In the past when I have they automatically open downloaded files. I use Windows Vista
-
Is there a tutorial on how to use control arrays in LabWindows? It is quite simple to create in IUR, but the coding is not what I was hoping. I tried this for (iLoop = 0; iLoop = iNumberofControls; iLoop ++) SetCtrlVal (Panel, CRTLARRAY [iLoop], valu
-
I have a D-610 from Dell with windows XP, when I turn on the computer, the printer Dell flash screen appears and then goes to a black screen with a flashing on corner top l/h. I tried to boot into safe mode, nothing works. I ran diagnostics, no help.
-
I just look something up in sitting position with the tv on, the Xbox game, then cut the video and audio. The red light indicating the power was still on. Now it just blinks 4 times on and on. I looked at this top and I saw it was a circuit problem a
-
1 error windows must now restart because the plug-and-play service terminated unexpectedlyerror 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly-every half an hour or 45 minutes such error comes an