The same windows poping continues to update to the top

Similar Questions

• How many times can I install Windows 7 on your PC even after I continue to update the hard drive SSD for a bigger?

  How many times can I install windows 7 on your PC even after I continue to update the hard drive SSD for a bigger? Unlimited?

  Mike

  There is no limit.

• laptop put in wrong code to "reg" when had key number how to change a battery bought windows pro disk and updated but now cannot find where the same register that help please

  2 years ago, I bought a dell to Wal - Mart 6 months to a year later started having problems I was sent to a disk hard was not then a cd rom drive was not so ok dell restore discs but started again said I had to buy the record of service for 139 + or wipe because I was not registered. Well, I thought that I was put a few oem in place number victory reg key code that I now know that, battery, think you said dell ordered all this in a year without now im stuck so decided to modernize a victory pro from amazon.com but again I can not save one of them and I continue to have started off any HELP im new on computers and cell phones and im frustrated will be totally leave for months and then try to new any help appriciated thanks

  Use the key in your battery compartment (as long as it matches the version of Windows you purchased at Amazon) and activate by phone.

  You can not use the key (if it is a key 'Upgrade') as he was expecting to find a previous version of Windows installed and activated.

  Need an installation DVD that corresponds to your Dell key, read on.

  Download Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• I can't open up a new tab in the same window when I click on the little + next to the first tab. How it works on FF4 for Windows Vista?

  I have a labtop Sony Vaio with Windows Vista, just updated for the new Firefox and now when I go to add a tab in the same window, it will not allow a new. I clicked on the + thing button/tab a bunch of times and nothing happens. What can I do to fix this? I'm not very computer so the step by step instructions would help a lot. Thanks for any help.

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Windows 7 wants to continually do updates everytime I turn on

  Windows 7 wants to continually do updates everytime I turn on the computer

  Hello

  1 did you change on your computer?

  2. What are the updates that are installed permanently once you restart your computer?

  3. What is the exact on the screen error message when you restart the computer

  4. are you able to boot to the desktop

  5. What are the updates which is installing?

  I suggest you follow the steps below and see that it works fine:

  Step 1

  Look for the updates failed and install it manually in a clean boot state.

  Click Start

  In the find what box, type type Windows Updates

  Click view update history

  In the State of this window column, locate the update could not be installed

  Once you have found the update failed including install updates in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Go to the website from Microsoft downloads.  Enter the duration of the update (KBxxxxxx) in the search box and press ENTER.  Click the link for the specific update, and then click the download button.  You will get the option to run or save the download, Save to your PC.  Once the download has completed, you will get a run option, open the folder or close.  Make sure that all other applications are closed and select the run option.  (If you close this window or need to try again to install, just go to the location of the file has been saved, and double-click the file.)  This will start the process of installing again.)

  Step 2

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Concerning

• I stop my new laptop with Windows 7, install new updates. But now my laptop won't charge. There only dark blue screen. He won't even have to sign on the screen. Someone at - it happen?

  I stop my new laptop with Windows 7, install new updates.  But now my laptop won't charge.  There only dark blue screen.  He won't even have to sign on the screen.  Someone at - it happen?

  Hi ctgreen

  Welcome to the Microsoft Answers site!

  You can try the following and link methods under each method for more information on the same and see if one of them solve the problem.

  Method 1: Start the computer in last good known Configuration

   

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the button start , click the arrow next to the button lock , then click on restart.

  1. Do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start, and then press F8.

  1. In the Advanced Boot Options screen, use the arrow keys to select last good known Configuration and press ENTER.
  2. If your computer has multiple operating systems installed, use the arrow keys to select the operating system that you want to start using the last good known Configuration, and then press ENTER. Windows will then resume starting normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: Start your computer in Mode safe

   

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click on the Start button , click the arrow next to the lock button , and then click restart.

  2. do one of the following:

  o If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  o If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode and press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you'll see the words Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to access the desktop in SafeMode I suggest you read the article in the link below for instructions on restoring the system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Windows Vista Home Premium update froze during the 'configuration' June 30, 2009.

  Received notification of five updates to install on my computer Windows Vista Home Premium, one of them being Internet Explorer 8.   All the downloaded slowly.   Each of them appeared to install, but slowly and I left the computer while he was installing the 3rd update.   When I came back it had evolved in the 'Configuration' screen (always see after there are updates and it restarts) and sat there for hours.   It reads "Configuring updates: stage 3 of 3, 0% complete.  The percentage of nevers turns off 0%.   I finally turned off the computer and when she started he said windows had not closed properly so I chose the Safe Mode option.   He immediately went the same configuration screen.  I left it again for 4 hours, but no change.   What should I do?

  The laptop is a HP tablet PC.

  Here's how to uninstall the ones you don't want.

  And how to change the settings of update and IE8 HIDE update!

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• After WSUS downloaded and installed the most recent Windows XP and 7 updates, we encountered the following error: page of the Intranet Web displayed in Internet Explorer (8 or 9) is on SERVER_A

  After that WSUS installed and downloaded the most recent Windows XP and 7 updates, we encountered the following error:

  The Web page of the Intranet being viewed in Internet Explorer (8 or 9) is on SERVER_A
  and the page contains a link to a file on a network share on the Serveur_B, making the href path something like
  'http://SERVER_B/myShare/myDocument.doc '.
  ... then it does NOT work.

  If the Intranet Web page being read in IE (8 or 9) SERVER_A on
  and the page contains a link to a file on SERVER_A, making the href path something like
  'http://IP..ADDRESS/myDocument.doc '.
  ... then it does not work.

  Before these updates, the system worked flawlessly.  We try to identify the update that caused this problem, but 28 of them fell on a Tuesday.  (22/11/2011).   These questions are the same with IE8 or IE9 and WindowsXP and Windows7.

  Has anyone seen this problem?

  Thanks, Jim

  It is a specific consumer support forum.

  You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads

  You will find support for Windows XP in an enterprise in this forum environment: http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

• How can I get windows to download an update continually reports error N0. 646 "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  How can I get windows to accept an update it continually indicates is available but does not download and an error message no. 00000646?

  "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  Hello

  It is a Microsoft Fixit who will help with this issue.

  You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
  Office updates
  http://support.Microsoft.com/kb/2258121

  Check this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• during the windows vista pack 2 update my antivirus will become obsolete?

  during the windows vista pack 2 update my antivirus will become obsolete?

  Hi victor,

  It would be useful to know the name and the version of the antivirus program that you use. However, in general (and frankly I can't think an exception) upgrade Vista SP1 to SP2 will not make your out-of-date antivirus.  In fact, it will improve the overall security of your system.  But just to be on the good side, I suggest that you update your AV software once you have completed the upgrade to SP2 and installed all the additional Windows updates which will become available once you do this (and you may need to run a few times to get everything as some may be presented until others have been installed).

  If you want suggestions of security software, please post your version of Vista (e.g., 32-bit Vista Business) as well as the names and versions of any software security you are currently using or have used or had installed even if you've never used (and when the definitions for the software in use have been updated).  These suggestions will be excellent and work well together (even if you can not install two AV programs at the same time, these are not all the AV programs but still aid in the detection and removal of malware, viruses and spyware.  And they are all completely FREE - nothing we suggest will not cost you even a penny and that they will be as good if not better that people pay money to get the bits.

  I hope this helps.

  Good luck!

• Open a folder in the same window

  Using Vista

  I had an about eighteen files Windows Update a couple of days.

  Since then, whenever I open a folder to load, it opens in a new window. I want to open it in the same window.

  Tools > Folder Options > Browse records has NO effect.

  Find the update cause your problem:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• My option "open in a new tab in the same window" has stopped working.

  After working for centuries without any problem, my option "open in a new tab in the same window" has stopped working.  Support suggested that I go to tools, select internet options and open tabs, and then select open in a new tab in the same window option.  I did as instructed and concluded that this option under the tabs was already selected and unchanged.  I changed this option, closed my browser and restarted my computer as instructed.

  As before you follow these instructions, and when viewing online and wish to open a link in a new tab in the same window I once again this desired option.   Internet does not take into account my instructions and opens my link in a new window.  This is extremely irritating.

  Does anyone have a solution?

  Hello

  What version of Internet Explorer work?

  You can try the following steps and check:

  Method 1:

  You can reset Internet Explorer 9 settings and check

  http://Windows.Microsoft.com/en-in/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Important note: ignore in place update from the above mentioned link.

• Lack of this option: "open documents as new tabs in the same window.

  I have Adobe Acrobat DC (Classic) Version 2015.006.30119.

  I saw that there is a feature in Edit > Preferences > General called "Open Documents as tabs in the same window," however, Miss me this option.

  It is not available in the Classic way?

  

  (Image taken from another post.)

  Are you sure, sukritd15, it appears in the traditional way? I heard that he said that tabs are certainly not in the classic version and will be unavailable to people with permanent license until the payment of the next update, subscription only. And according to Adobe - Acrobat: for Windows is the latest version.

• NavigateToURL doesn't open in the same window and refresh of infinity

  I have a project that requires a "skip" button and to go to a url specified in the same window once the animation is complete. The button works, however the navigatetourl in the last image does not.

  Here is the code that I placed in the last picture:

  addEventListener (Event.ENTER_FRAME, fl_EnterFrameHandler);

  function fl_EnterFrameHandler(event:Event):void

  {

  Start your custom code

  This code example displays the words "Framework of entry" in the output panel.

  navigateToURL (new URLRequest ("http://www.student.nvcc.edu/home/amlayne/ite170/dreamweaver/graded_assignments/index.html"), '_self');

  ;

  Stop();

  Complete your custom code

  }

  I tried to move it to a previous setting, placing a stop in the previous framework, displacement of the order after stop and so on. No matter what I do, the new url opens in a new window and is in a constant state of refreshment. I also disabled loop but the animation begins to load the first image again anyway.  Help, please. I tried several fixed listed in the forums which are built around the same with no different results.  You can view my animation here: http://www.student.nvcc.edu/home/amlayne/ite170/flash/graded%20assignments/myintro.html

  NOTE: You must close the browser to get the update to stop.

  I have worked on this issue in two days and I am at a total loss.

  the enterframe event is dispatched repeatedly several times per second (equal to your pace) and this isn't what you want.

  Replace all the code with:

  navigateToURL (new URLRequest ("http://www.student.nvcc.edu/home/amlayne/ite170/dreamweaver/graded _ * ignments/index.html"), "_self");

  Stop();

• Firefox does not restore the previous session in the same window?

  Hello

  Everytime I open Firefox and click on the button restore previous session inside that nothing happens. This is the first part of the problem. Then, when I click on my history and click on restore previous session, it does but they will open in a new window. Ago only 3-4 days it started to arrive. I would like to change what is causing this back to how it was such that it is quite annoying when I pinned tabs and I have to keep re pinning.
  I am running the developer version of Firefox.

  Thank you.

  Turns out after some updated, it resets some general settings include the opening to the top of the front legs "at the start of Firefox Developer Edition: