The scale of black rectangles product

Similar Questions

• The scale of "rounded" rectangle

  Hi, I have problems, identify ways to scale a rectangle rounded corners become distorted.  I've attached an example below, the smaller rectangle on top being the original, and the one below is the version "re-size" the same thing.  As you can see, the corners are not appropriate.

  Thank you.

  For your specific example, you can simply marquee - select the lower corners with the tool, direct Selection, and then shift-to slide down.

  

• Want 7640: HP Envy 7640 black Rectangles

  New printer. When I print documents (.) PDF's all I printed that day) the printer prints random black rectangles on the text. I ran the diagnostic tests and other tools.   Went to the HP page to download the drivers. Don't know how if I have the current drivers.  Reinstalled the software.  Black rectangles persist

  UPDATE: nothing I tried worked to get rid of rectangles black print on the top of the text.  In fact, I printed a .pdf today that print a huge black about7inches block 6, or larger.  Must have taken my full black ink cartridge. (Just pay $78 for 2 XL cartridges. Don't think that there are generics)

  So, I was forced to call the HP Technical Support for assistance.  I had to give up control of my computer technician. After a bunch of clicks and the bed, the technician asked me to print a .pdf file. When I printed the document .pdf even before default, it printed perfectly.  Don't know what the technician did, but it worked!

• Difference between the scale of gray and black and white adjustment

  Hello

  I just want to know the difference between black and white and grey adjustment of scale when printing text only, and which uses less ink. Thank you

  Hi jexee55,

  I see that you would like to know the difference between grey and printing b & w.
  I'll be happy to help you.

  Basically, it prints in shades of gray.

  Save on ink also.

  You can change the setting in the print in grayscale driver.

  You would go into the Printers folder.
  Right-click on the printer, on the left, click printer properties.
  Click the paper/quality tab.
  Click on the button to advance down.
  Select the characteristics of the printer and enable or disable this gray scale.

  If you want to print a black and white document using black ink only, do one of the following according to
  your operating system. Depending on which printer you have.
  On Windows: Open the printer software, click on set preferences. On the paper/quality tab, click
  Advanced. Select black ink only in printing in grayscale in the drop-down list under printer
  Features.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Have a great day.

• HP Envy 15-k111nl: a black rectangle on the start of the game

  Hi all

  I am writing here because I am having graphics problems during execution of any kind of games on my brand new HP Envy 15-k111nl. In particular, the games work with Dx9, while they never work in mode Dx11. immediately after I start the game, in fact, I have a black rectangle in the upper left of the screen (in the rest, I see the desktop). I can move the cursor, and I can hear the sound of the game play. Have you ever heard on this issue?

  Thank you in advance.

  Hi SDF15,

  Thank you for your help. The issue was due to the accident of my Nvidia drivers. I discovered that it was triggered by another pilot that I had installed a VGA on USB cable. Now, it's all ok!

  Roknar

• Black rectangle at the end of the Final Clip

  Hi all. When I arrive at the end of my last video, a black rectangle appears vertically on the right side. No matter where I cut this clip and what clip is in place, the rectangle is displayed at the end. Can you help me?

  This is a feature that Adobe added to show that it is the end of a sequence. It is not visible in the final export. This feature took everybody.

• black rectangle in flash

  Hello

  I am getting problem with flash swf files on my site.
  

  black rectangle Flash it show files.
  Click on these links.
  http://www.scraps99.com/Facebook2.aspx?pageNo=1 & categ = funny_facebook_flash
  http://www.scraps99.com/Facebook2.aspx?pageNo=1 & categ = teddy_day

  Please tell me solution as soon as possible.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Strange black rectangle top-right

  I have a strange black rectangle in the upper right corner of the office.

  It is above all the windows, which means that I can't use the close button, and it contains two or three numbers.

  Usually, they are 060 001, but sometimes it turns into 058 001

  All those who have an idea of what it is and how to get rid of?

  I executed Windowsn 8.1 on a Lenovo Y70 Touch

  Anders

  Hello Solid_Cruver,
  It is not possible to make a screenshot that will contain this rectangle.

  But I think that I thought about it. I just created my first application 'Metro' and when it crashes (who does...) don't let this rectangle. If I restart Visual Studio, it disappears.

  Will have to look for what it is to...

  Thank you for your answer!

  Anders

• The scale of the maps of intensity color ramp

  Hi all

  I use a graph of intensity to draw the characteristics of an ultrasonic field. The measured values expand a range between 3, 0e-6 up to 12, 0e + 0, then I need a very well detailed verry color scaling. I found a beautiful image (http://zone.ni.com/devzone/cda/tut/p/id/7664) joint as an image "colors ramp.jpg precise", where the band of colors is reduced by the black-> green-> white-> blue-> green-> red. But with the "color table generator.vi" caused by only three points of features for each of the colors red, green, blue, I get only a scale like on the second picture "rough color ramp.jpg. It is not possible to scale of the ramp from black to green to white, then again for blue, green, red.

  How can I get a color ramp as in "precise color ramp.jpg? I guess I need the possibillity of each of the red, green, blue nationally on more than three points.

  Thank you very much in advance.

  Hello...

  I found the solution in http://decibel.ni.com/content/docs/DOC-9294.

  The "Color Table" exit (U32 data type table) Create Gradient Color Ramp.vi can be connected to a node property graphic intensity with the property "color tbl".

  Now, the ramp can be fitted with various colors, for example now a color tone can be used twice on the bottom of the ramp and the middle or on the top of the ramp again.

  :-))

• I just bought my hp pc Pavilion g series, but many times not dΘmarre; the screen remains black or blue and must strive to market several times. What is going on?

  When I turn off my pc and that you want to turn it back on, it does not work and the screen remains black or blue, sometimes but nothing else and does not

  starts up, until I have try several times in pushing and disable the power button and suddenly starts working again. The pc is almost brand new (2 weeks)

  What is going on?  Thank you very much

  Hello

  I suggest you do the repair of the system startup and check if that helps resolve the issue.

  Check the link for more information on repair system below.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  You can also check the event viewer for more information on the error message.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  See also:

  Resolve stop (blue screen) errors
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• Audio event system has detected a device connection event audio location description of the Panel right-Black Jack

  I have no sound on my Dell inspiron 6400. Volume is not muted, sigmatel peripheral is enabled, hardware (speakers laptope) work, drivers have been updated and reinstalled.  Windows xp service pack 3.  The problem occurred after that children were playing a game of Dora on CD.  Above the popup of the event (System event Audio Audio System has detected a device connection event audio description location of the right panel Black Jack) appears.  Can get sound by using an external speaker.

  I note a number of comments suimilar on other sites but no resolution on these offers from

  If you go into Device Manager, you see a yellow fringe (!), which reports an error?

  To access the Device Manager in Windows XP:

   

  1. Click Start and then click Control Panel.

  2. Click the performance and Maintenance link.

     Note: If you see the Classic view of Control Panel, you will not see this link. Simple, double-click on the System icon and go to step 4.

  3. In the performance and Maintenance window, click the icon at the bottom of the window .

  4. In the System Properties window, click the hardware tab.

  5. The hardware tab selected, click the Device Manager button.

  Double-click sounds and game controllers.
  This will bring up a dialog box. From there you can update drivers, see the details of driver and driver rollback.

  If you uninstall CD Dora, you are able to get her back? It may be a conflict with the 3rd party product.

  Please let us know.

• HP2000 369wm: connected replacement screen, the screen remains black.

  Hi I'm new here, I tried to find the solution here, but I can't find what I'm looking for but anyway...

  My laptop had a broken screen so I used an external monitor via the vga input. One day I was messing around on the web and I got a virus that paralyzed the system that all frozen cuz then I thought that if I plugged in my phone that I could try to fix it, but eventually transmitting it to my phone, but luckily I could reset it. I thought that if I replaced my screen that I would be able to get the screen for boot sequence or something but the screen remains black and externally will not work. There is something lacking in me to use the primary monitor, I just put? Or is there a way I can format without being able to see? I'm sure that the virus all messed up my boot sequence, but without seeing the screen and unable to use external, I am at a loss.

  cruizer71 wrote:

  Sorry Ive had one hell of a record time on my account here. I couldn't find the PDF you were making reference to, could you post a link?

  regarding the laptop:

  model: hp2000-369WM

  series:

  product: QE339UA #ABA

  OS: WINDOWS VISTA 32-bit (I think, but its vista for sure)

  is there another number or anything I should post?

  Here is your model and it doesn't have a Vista operating system... it's a Windows 7 or Windows 8 double, so check again?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5171087&LC=en&cc=us&DLC=en&cc=us&lang=en

  And your billboard is the reference number corresponding to this HP part number:

  15.6-inch, HD, LED, display panel BrightView 645096-001

  It shows that a single panel comes with this laptop.

• How can I create a mixture of a black rectangle to transparent?

  Hello

  As the title suggests, how can I create a mixture of a black rectangle to transparent?

  Here is a link (http://b.1339.cf/qmdrqik.mp4) to my attempt, I'm sure I'm doing things.

  I copied the steps exactly by (https://youtu.be/Tm3ugB0vj-k?t=15m53s) to make sure I did it right.

  Is there something obvious I'm doing wrong?

  Josh

  Navigate to the object > blend > blend Options and smooth multi-step change and change that to something greater than 1.

• the photos are black when they are imported

  I imported the photos and they appear in black. I've selected all the photos and reset the settings and was able to see the pictures.  However, when I made changes and did a before and after comparison, the front is a black rectangle. I re - calibrate my settings and nothing works. Help, please. I've never had this problem.

  Hi cedric are

  Greetings!

  Sorry for the inconvenience.

  Please read this article: thumbnails appear black in Lightroom CC 2015.2/6.2

  Concerning

  Jitendra

• I want to achieve the effect darken black how accomplish this?

  I want to achieve the effect darken black how accomplish this?

  Choose the product in the Mode of merger on the transparency Panel menu (window > transparency).