the service has failed to demand launch or timely and well control even more!

Similar Questions

• Printers are lost after installing updates and could not start get error 1053 service print spooler service message has failed to demand launch or control in a timely

  Original title: print spooler does not - error 1053 - Windows 7

  I have a HP Pavilion dv4-511 with Windows 7.  2 weeks ago I ran a Windows Update and all my printers installed have disappeared after a reboot.  I did a system restore and they were all back.  Yesterday, I installed an update to a software (Soonr) and it's the same thing.  I clicked on the print spooler service to see if I was able to restart and got the error 1053 saying "service did not respond to demand launch or control in a timely." If I click on "Add a printer" in the menu devices and printers, I get the following message: "Windows can't open add printer."  The local print spooler service is not running.  Please restart the spooler or restart the machine. "I rebooted the computer and the same thing continues to happen.  I did a system restore and the printers are all back.  It seems that every time there is a change to any software, it creates this problem.  Help, please! Thank you.

  Hello

  Welcome to the Microsoft community!

   

  When the updates are installed, the printers will be lost and when you try to start the print spooler service, you get the service saying error 1053 has failed to demand launch or timely control.

   

  The problem may occur if some system files are corrupted or because of malicious content.

   

  I suggest you follow the steps mentioned below:

   

  Method 1: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: Scan the computer to remove all possible malicious content

   

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• Windows could not start the service on Local computer print spooler. Error 1053: The service did not demand launch or timely control.

  My printer was working fine and then today I received this message. Tried to strat as the spooler services but is unresponsive to start and I can stop him either. Heeeelp.

  Hi Slobodan,

  Thank you for posting.

  1 is connected to the domain of the computer?

  Please see the link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

• "Window cannot start service on Local computer print spooler. Error 1053: the service is not responding to demand launch or timely control. »

  I was going to print something my Professor downloaded on the school Web site, but after I click Enable editing button, the printer could not print. I mean, I could not find my printer. He went, and when I try to add a printer, it gave me an error message. I tried troubleshooting of the printer, and I got was that the print spooler was not working. I used office.com and tried to restart the print spooler in the services.msc, and he gave me this: "window on computer Local Print Spooler service cannot be started. Error 1053: the service is not responding to demand launch or timely control. "Help, please!

  Hello

  I suggest you try the steps from the following link:

  Spooler printer Forum FAQ:A error was received while trying to use printer
  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/2b618d54-854A-4CFD-84F5-f069aad75a9f/

  Method 2
  I suggest you try the steps from the following link:

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• Windows 8 error «the service did not demand launch or timely control»

  Hey,.

  I upgraded my pc Windows 8 but when I just downloaded a program it tells me "service did not demand launch or timely control.

  What should I do

  Help, please!

  Hi Alaaahed,

  1. what happens when you try to log in to other accounts?

  2. have you made any recent hardware or software changes to the computer before the show?

  I suggest to refer to the suggestion of Babu V from the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/i-am-facing-problem-with-Windows-8-apps-in/b9484cc7-617d-4ED3-982B-920013cc3197?msgId=3bab3eef-3cfc-41ff-8b33-8b328c965682

  If the problem persists, you can also refer to the suggestion of Romaric Khan in the following link and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/the-service-did-not-respond-to-the-start-or/0fed2a0b-a6c8-4CAE-8DF6-97c60c4450b4

  If you are still having the same problem, I suggest you to send us the logs from the event viewer.

  You can follow the procedure to get the event viewer on Windows 8:

  (a) go to the splash screen .
  Type b) in the event Viewer.
  (c) this will bring up the box of event viewer. Click to open Event Viewer.
  (d) in the left pane, expand Windows logs.
  (e) click to the application log. Select the first event in the log, and then use the arrow keys to scroll down.
  (f) most of your event will be Information. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

  Please post back with the necessary information if the problem persists and we will be happy to help you further.

• Error message: the application has failed to start because its side-by-side configuration is incorrect and can not enter in the email and save records

  I get a message that says that the application has failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details.   I used this link to email for 2 years and NOW I can't in my email and all my saved folders.

  Hi KathyHendges,

  1. What mail client do you use?

  Step 1:

  You can try clicking with the right button on the link and select run as administrator and check.

  Step 2:

  This error code can occur due to corrupted Microsoft Visual c++ installation.

  To resolve this problem, you can install the latest version of visual C++ according to the version of Windows installed on your computer (32-bit or 64-bit) and check:

  Download and install Microsoft visual C++ from the below mentioned link:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  For more information, you can consult the following link:

  http://blogs.msdn.com/b/developingfordynamicsgp/archive/2010/08/20/side-by-side-configuration-is-incorrect-error-message-given-launching-Dynamics-GP.aspx

  Hope this information is useful.

• I bought the upgrade to windows 7 proffessional, but told it that the upgrade has failed. what I'm doing.

  It just says: the upgrade has failed.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Problem installation AutoVue - deployment of application in the field has failed;

  Full of the error:

  Deployment of application in the field has failed; Deployment error - Exception has occurred in the javax.xml.ws.WebServiceException of wsgen process: cannot create JAXBContext deployment error - Exception has occurred in the javax.xml.ws.WebServiceException of wsgen process: cannot create JAXBContext.

  Sun GlassFish Enterprise Server v2.1.1

  This error occurs when == > http://localhost:4848 / | Console mgt GlassFish 2.1.1 | Web applications | Deploy | Web application, AutoVueWS.war

  
  

  Background:

  I am an Adobe Flex coder threw in a Silverlight project, trying to get a JavaBean to work.

  My task is to get a DGN file to display in my Silverlight application. I tried to fix this using AutoVue as a web service returns an image and displaying this image on my control. This, of course works fine on the last machine of developers. However, I've been totally failed to install on the client server. I have no real idea of what I'm doing with the GlassFish/Java/AutoVue for this project section. Any help would be greatly appreciated

  
  

  -I have have Glassfish installed v2.1.1 and seems to work correctly.

  -I used it C:\Program Files (x86)\Java\jdk1.7.0_21\bin\jar.exe' cvf - AutoVueWS.war - C AutoVueWS.

  to compile the war file.

  -Server = Pro, 2 GB, Windows 7 64-bit * Virtual Machine
  

  Post edited by: 6bf38c5b-5aea-4186-9e77-bf1326cfd283

  New "6bf38c5b-5aea-4186-9e77-bf1326cfd283," Hi

  If all you need to AutoVue for is the conversion of an input format (for example, DGN) in a PNG image format, so yes, it's a case of using the AutoVue Web Services API (more precisely "convert it" Web Service). In this case, you should proceed with the question of GlassFish forums so they can help solve the deployment problem.

  However, depending on how you obtained your Silverlight solution implemented, it might be even more efficient/transparent to avoid the conversion completely process and simply stir the applet AutoVue in the interface of your solution. In this case, users would see their files (in whatever format or DGN) directly within the AutoVue applet, and you can customize the user interface of applet according to the needs (in terms of menus/toolbars tools/etc). If this is of interest to you, check out the Guide of AutoVue API at http://docs.oracle.com/cd/E37436_01/otn/pdf/E37455_01.pdf

  And to answer your last question - no, there is no way to communicate directly with the server of AutoVue. The AutoVue API and the API of Services Web AutoVue are the two APIs on the client side.

  Thank you

  Graham

• The transaction has failed, but the MONEY has been collected.

  I buy the standard on adobe cs6 online.

  the transaction has failed, but the money was successfully transfer.

  Can any who advised what to do and who should I contact with?

  Thank you.

  Contact adobe - http://helpx.adobe.com/x-productkb/global/service-b.html

• the application has failed to start because its side by side configuration is incorrect

  I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect

  Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
  
  You can try to use the sxstrace tool to see if you can find which files are missing or damaged.

  • http://www.Vistax64.com/software/245768-side-side-configuration-incorrect.html

• the application has failed to start because its side-by-side configuration is incorrect for windows live messenger

  Wen I Conect live windows Messenger tray I have this massege and I can't conect to the programe

  the application has failed to start because its side-by-side configuration is incorrect

  Hello Pecky,

  Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Solution Center Messenger Portal community. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/product.aspx?ProductID=2

  Thank you

• I am able to receive emails, when you send emails I get the following message: the connection to the server has failed.

  When sending emails, I get follow-up messages:

  The connection to the server has failed.

  Object "try again"
  Server: 'smtp.comcast.net '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 25
  Secure (SSL): Yes
  Socket error: 10013

  Comcast e-mail settings (note the reference to port 25)

  http://forums.Comcast.com/T5/E-mail-and-Xfinity-connect-help/E-mail-client-settings-customer-generated/TD-p/778889

• Windows XP Outlook Express 6... the connection to the server has failed.

  I have Windows XP. When you attempt to send emails from my Outlook Express 6, I get this message...

  The connection to the server has failed.

  Account: 'pop3.live.com '.

  Server: 'smtp.live.com '.

  Protocol: SMTP

  Port: 25, secure (SSL): Yes

  Socket error: 10013

  Error number: 0x800CCCOE

  Probably your ISP blocks port 25 for access to the SMTP servers other than their own. Go to tools > accounts > {account} > properties > advanced. Change the port to 587 and try again.

• logon error: Hphmon06.exe could not be located. the application has failed to start because hpzjrd01.dll is not found.

  Original title : I get... suite msg on logon: Hphmon06.exe not found in windows xp.  the application has failed to start because hpzjrd01.dll be found.

  Someone else already has this nagging and ongoing problem?  How to solve this?

  glenkelly,

  If you are just wanting to get rid of the annoying popup, try the following steps:

  -Click on the Start button
  -Click on run...
  -In the "Run" dialog box... ", type: msconfig
  -It will jump to the top of the window "System Configuration"
  -In the window "System Configuration", select the tab "start".
  -In the first column (startup item), Ahmed to the bottom of the list and search for "Hphmon06.exe."
  -(Ex: «Startup Item»---«Hphmon06»)
  -If you are unable to locate this name, expand the column "order."
  -In respect of the 'Command' column, scroll down and look for the path 'Hphmon06.exe '.
  -(Ex: «Command»---«C:\Program Files\Fichiers Files\HP\hphmon06.exe»)
  -Uncheck the question to the left of the box, and then click 'OK '.
  -More than likely, a box will appear asking if you want to "Reboot now" or "restart later".
  -Click "Restart now" and see if the popup box boring will disappear when you connect!

  -Riley

• My outlook express has stopped working and I get this error message, "the connection to the server has failed..." »

  My outlook express no longer works and I get this error: the connection to the server has failed. Account: 'pop-server', server: 'pop-server', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E. Can someone tell what to do?

  Make sure that you can access your e-mail via webmail, if you have this option to ensure that it is not a problem on the server.  Then locate the antivirus interference and ensure that the analysis of the electronic mail is disabled (see www.oehelp.com/OETips.aspx#3).  Try to remove your e-mail account and then close OE and then add it back again and then see if it works.

  Steve