"Window cannot start service on Local computer print spooler. Error 1053: the service is not responding to demand launch or timely control. »

Similar Questions

• Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

  Hi SimoneJ,

  Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

  I hope this helps.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Printer Spooler error 1068: the dependency service or group could not start

  Original title: the printer spooler error

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start
  
  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start

  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  need to update Printer Spooler service...

  Run the following as run as administrator...

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  Reset...

• Windows 8 error «the service did not demand launch or timely control»

  Hey,.

  I upgraded my pc Windows 8 but when I just downloaded a program it tells me "service did not demand launch or timely control.

  What should I do

  Help, please!

  Hi Alaaahed,

  1. what happens when you try to log in to other accounts?

  2. have you made any recent hardware or software changes to the computer before the show?

  I suggest to refer to the suggestion of Babu V from the following link and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/i-am-facing-problem-with-Windows-8-apps-in/b9484cc7-617d-4ED3-982B-920013cc3197?msgId=3bab3eef-3cfc-41ff-8b33-8b328c965682

  If the problem persists, you can also refer to the suggestion of Romaric Khan in the following link and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/the-service-did-not-respond-to-the-start-or/0fed2a0b-a6c8-4CAE-8DF6-97c60c4450b4

  If you are still having the same problem, I suggest you to send us the logs from the event viewer.

  You can follow the procedure to get the event viewer on Windows 8:

  (a) go to the splash screen .
  Type b) in the event Viewer.
  (c) this will bring up the box of event viewer. Click to open Event Viewer.
  (d) in the left pane, expand Windows logs.
  (e) click to the application log. Select the first event in the log, and then use the arrow keys to scroll down.
  (f) most of your event will be Information. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document.

  Please post back with the necessary information if the problem persists and we will be happy to help you further.

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• Windows could not start the service on Local computer print spooler. Error 1053: The service did not demand launch or timely control.

  My printer was working fine and then today I received this message. Tried to strat as the spooler services but is unresponsive to start and I can stop him either. Heeeelp.

  Hi Slobodan,

  Thank you for posting.

  1 is connected to the domain of the computer?

  Please see the link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

• Anyone know what is the price of Windows 7 Starter and Home Basic? I need to know the full version (not the cost of upgrade) price

  Anyone know what is the price of Windows 7 Starter and Home Basic? I need to know the price list of the full version (not the cost of upgrade)

  Windows 7 Starter is not available as a product of the retail. It only comes on new NetBook or Nettop computers.

  Windows 7 Home Basic Edition is only available in some markets, it will be difficult to find in the markets developed as the United States.

  Windows 7 price India

  Microsoft Store

  http://www.microsoftstore.co.in/Microsoft/38/ProductList/Windows.aspx

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Printers are lost after installing updates and could not start get error 1053 service print spooler service message has failed to demand launch or control in a timely

  Original title: print spooler does not - error 1053 - Windows 7

  I have a HP Pavilion dv4-511 with Windows 7.  2 weeks ago I ran a Windows Update and all my printers installed have disappeared after a reboot.  I did a system restore and they were all back.  Yesterday, I installed an update to a software (Soonr) and it's the same thing.  I clicked on the print spooler service to see if I was able to restart and got the error 1053 saying "service did not respond to demand launch or control in a timely." If I click on "Add a printer" in the menu devices and printers, I get the following message: "Windows can't open add printer."  The local print spooler service is not running.  Please restart the spooler or restart the machine. "I rebooted the computer and the same thing continues to happen.  I did a system restore and the printers are all back.  It seems that every time there is a change to any software, it creates this problem.  Help, please! Thank you.

  Hello

  Welcome to the Microsoft community!

   

  When the updates are installed, the printers will be lost and when you try to start the print spooler service, you get the service saying error 1053 has failed to demand launch or timely control.

   

  The problem may occur if some system files are corrupted or because of malicious content.

   

  I suggest you follow the steps mentioned below:

   

  Method 1: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: Scan the computer to remove all possible malicious content

   

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• During the restart of Vcenter Server - error 1053: the Service has not respond to the start or control

  Hi all

  I couldn't use the vSphere Client to enter in vCenter (from my office).

  I could not Remote Desktop on the server vCenter resides on.

  I could go on the console of the server vCenter resides on.     I couldn't use vSphere Client from there either.

  I tried rebooting vCenter and got this error message:

  Unable to stop the VMware VirtualCenter Server Service on Local computer.

  Error 1053: The service did not respond initially or control in a timely manner.

  Any ideas where to look for more clues or ideas on what might be the case?

  Thank you.

  I could not Remote Desktop on the server vCenter resides on.

  This is not vcenter Server.

  Check the configuration of Windows.

  Have you tried restarting your vCenter Server system?

  André

• Windows spooler printer 8 error 1068: the dependency service or group could start.

  Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

  I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
  But I get an error:

  "Windows failed to start the Service on local computer print spooler.
  Error 1068: The dependency service or group could start.

  "Okay, so I go into properties and see what are the dependencies.
  Attached image:
  

  RPC is running, however, no FAX.
  Go to Fax and just getting started. I get the error 1068
  Focus on dependencies here.
  Attached image:
  

  IM lost at the moment.
  Any help would be greatly appreciated.

  I ran sfc/scannow and found no problem.

  Please notify.

  I found this somewhere else and this fixed my problem

  I had the same problem and I have created a batch file that I have run as Administrator:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• Win7 print spooler error. Cannot install my printer.

  I bought a new Samsung Mini laptop with Win7 preinstalled.  I tried to install my normally (a fairly new Samsung CLP 315 Color Laser) and the system will not allow it.  I get the following error:

  Windows can't open add printer.  The
  local print spooler service is not running.
  Please restart the spooler or restart the
  machine.

  I rebooted the machine and got the same error.  I went to the services.msc file and attempted to start the spooler service to and I got the following error in the column "description":

  I tried to restart the spooler service to and I received the following error message:

  Windows could not start the spooler on Local computer service.

  Error 1053: The service did not demand launch or timely control.

  I tried to download the current driver more than Samsung.  I have read every thread repair throughout the web and tried a thousand different repair attempts.  I used http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html to analyze the files on my system.  I even bought the software UniBlue Registry Booster for $29.99 in order to eliminate the problem... and I'm here!

  I can't add a PictBridge compatible printer, not to mention my Samsung CLP 315, until the spooler service running.  I can't turn on the spooler service because Windows will not let me... I'm unable to print and I am unable to do anything.

  I'm a PC and I want to that I was a MAC right now!

  Can anyone help?

  most likely the spooler is a failure after install the driver.  Because the spooler is not running, you will need to check what drivers. print processors and language monitors that the spooler is trying to load.  Bruce has a few instructions.  I guess you ran the utility software troubleshooting print already.

  http://members.Shaw.ca/bsanders/CleanPrinterDrivers.htm
  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Cannot run .exe files error: service has not responded to the application launch or control in a timely

  Original title: Windows 8 download EXE files does not work... MSCONfig nor the desire even of the DOS command prompt

  Windows 8-files downloaded EXE will not run to message

  «the service did not demand launch or timely control»

  Windows Defender icon appears next to change the settings so I can't edit or run them even if I am administrator

  I have Norton Anti - virus question while running is probably NOT a virus. Repair and restore won't work either

  All the solutions for especially appreciated

  Hi John,.

  I suggest you follow the advice given by Anil Kumar B responded on January 17, 2013 in the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/unable-to-open-exe-files-with-Windows-8/61a4a39c-FAEF-46e7-BE80-9653cc3addda

  Please keep us informed on the status of the issue to help you further.

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period