The service start scripts found in 11, 1.2.2

Similar Questions

• laptop does not recognize the phone samsung S3 31 error: the Service starts

  Original title: error 31: Service starts
  I'm trying to get my laptop to recognize my phone of samsung S3.  I downloaded ' Microsoft_User-Mode_Driver_Framework_Install - v1.0 - WinXP.exe'... this driver is needed to get my laptop to recognize my phone. but, the service of this driver does not start... How can I get this service to start?

  Hello

  If resetting the phone does not help then you can contact samsung support.
  http://www.Samsung.com/SG/support/main/supportMain.do

• CiscoSecure ACS 4.2 could not start due to failure of the services start bit

  There are few services that wasn't able to restart, they are as follows:-

  (1) CSAuth

  Error:-"Windows could not start the csauth on local computer. For more information, see the system event log. If it is

  a non-Microsoft service, contact the service vendor and refer to service 1060 "specific error code

  (2) CSTacacs

  Error:-"Windows failed to start the cstacacs on the local computer. For more information, see the system event log. If it is

  a non-Microsoft service, contact the service vendor and refer to service 1066 "specific error code

  (3) CSRadius = start

  the rest of services like CSAdmin, CSDbSync, case were lit.

  Also I am not able to take the acs system backup of the System Configuration-> ACS Backup and pressing backup now. It shows the msg of error as

  : - CSAuth service must be running to start the backup

  I was referring to the snapshots of the OS itself, but I guess you checked now.

  Do not forget that the case works so you should see logs for services that do not work. Learn about the \CSAuth\logs folder for logs CSAuth and other records for other services that do not work.

  There is a located here very detailed troubleshooting guide:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  This guide should help you solve the question if there is no other software on the server to cause trouble. One thing it says who can apply to you is to ensure that the Windows Firewall as connection sharing Internet is not ongoing.

  Because I am familiar with your server, I think you should do the quick test below for if sure there are not taken, which may be crashing the authentication services that you mentioned. In the command line, type "netstat - ano | Findstr Listening-i"and see if or not he has taken open your ports Ganymede + and radius. He will probably return false, but it's worth a check.

  Worst case scenario, you may be able to use CSUtil to back up the database (I'm fairly certain you can back up services that work), install the ACS on a new Windows 2003 server, and then restore. You can use CSUtil to many types of exports and operations as well.

  If you manage to deal with the problem or not, you should speak with the person who is responsible for making backups of your servers and make sure that something like this was coming once again that you can have a quick fix during a maintenance window.

• Firewall service starts intermittently during the startup.

  Hey all,.

  I have been encountering a problem with the firewall service. It sometimes does not start when windows is started. Usually, this would not cause any problems, but it sets up and "Iron curtain" which will allow all incoming traffic (IE ping or VNC). I do a lot of business assistance level, so it starts to be a problem.
  The service starts very well if you start from services, everything works fine. But it will stop working for a period of days. I checked the other forums and tried several different patches, but is unable to isolate why his turn at random, or not.
  I increased the time to 2 minutes.
  I checked the firewall auth., its fine driver.
  I checked the "dependent" services, all are automatic and started.
  I saw that other people have had this problem, but that nobody has a solid solution for it. I am run on a machine to point of sale posiflex, but have seen others with her on the valleys, etc..
  I need to make sure that this will not be 'spread' when we deploy Win7 for several hundred other jobs in the company.
  Any help is appreciated.

  Hi Tom,

  -Is your computer connected to a network of area?

  -What security software is installed on the computer?

  A firewall is software or hardware that checks information coming from the Internet or a network, then it blocks or allows it to pass through your computer, depending on your firewall settings. Even if you think that there is nothing on your computer that interests everyone, a worm could completely disable your computer, or someone could use your computer to help spread worms or viruses to other computers without your knowledge.

  Let us try these methods.

  Method 1.

  You can run this Microsoft Fixit and check if that helps.

  Diagnose and automatically fix problems of Windows Firewall service: http://support.microsoft.com/mats/windows_firewall_diagnostic/

  See these articles for more information.

  Firewall: Frequently asked questions: http://windows.microsoft.com/en-us/windows7/firewall-frequently-asked-questions

  Understanding Windows Firewall settings: http://windows.microsoft.com/en-us/windows7/understanding-windows-firewall-settings

  Method 2.

  If you suspect a virus on the computer activity, and then run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  If your computer is on a domain network, you can view this issue in Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Response with the State of the question and we will be happy to offer you our help.

• After restarting the Services, service of the Foundation does not start

  Hi all

  Recently, I applied the patch and restarted services, later noted that the services of the Foundation does not start. I mentioned newspapers and show error below.

  < 29 April 2015 19:45:30 PDT > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 of Oracle Corporation >

  < 29 April 2015 19:45:31 PDT > < critical > < security > < BEA-090518 > < could not decrypt the username of {ESA} attribute value = 9e8e9w8ADkG/3Hx33gkE9Ukm29IxHIISKLeLw/FYfxTO0GcnA in the C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties file. If you copied an attribute costed boot.properties of another area in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties, replace the attribute encrypted by its value in clear text, and then restart the server. The attribute will be encrypted again. Otherwise, change all attributes encrypted values in clear text, and then restart the server. All the attributes of encryptable will be encrypted again. Decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException. >

  Enter the user name to start WebLogic server:

  I have connected to the Weblogic Server and checked, the service of the Foundation is not started.

  We do not have the backup of the installation folder.

  Manually, I have edited the user name and password and the services, started but no luck.

  Get an idea on processBootProperties.cmd, I'll set it off for the new boot.properties.

  Please suggest.

  Thank you

  Hi all

  I have manually enter the credentials for the logical server and services. It worked.

  I did the same thing first, but I made a few typo errors in credentials, he killed for more than 1 hour...) :

  Thank you

• The unit 3.1 (3) change of password for the Service account

  Hi all

  I am aware of the link and procedure on how to change the password of the service account of the unit 3.1 X here: http://www.cisco.com/en/US/customer/products/sw/voicesw/ps2237/products_tech_note09186a0080093f54.shtml#topic2

  My question is this. I have 5 unity servers that use this service account in any area, which includes Europe and the United States. If I change the password in AD all services will continue to work with the old password as long as they have not restarted with the old password? I know I need to change the password for each service that uses the account and then restart the unit, but since AD taking so long to reply, I was hoping to change the password of the account one day and then the next day or even longer when I have planned for my failure, I can then change the password for the services on each server and then restart the unit and make sure that replication is complete and the services start again with the new password.

  I think as long as I do not have to restart services can I change the password of the service account in AD a day or two before I schedule my outage can I change the password for all services, and then restart the unit. I know that I can force replication, but it would be nice to be able to change it in advance as long as it is not flexible, whatever it is. Even force the replication takes a lot of time in our environment and I want to be sure, can I change well in advance without having a negative impact.

  Thanks for your time!

  Keith

  If you change a password for a domain account, it should respond immediately through the Organization as AD treats this with the highest coastal.

• 11.1.2.1 upgrade to 11.1.2 existing - Services start

  Not a fun day world EMP for me...
  Windows 2008 SP1 three servers (web/app, DB, reporting)
  
  We did the upgrade implemented in 11.1.2 to 11.1.2.1 and was unsuccessful problems restarted however none of the services start (we did the upgrade only on the web/app and test to provide shared Services)
  
  Blow us the regedit (according to Oracle in a service request) and restart the Service install bat files. Are there services, reconfigure us via the Configurator everything is green... but the services do not always start
  
  OK looking for other avenues on this problem
  
  JTS

  VS C++ version incorrectly added 2008 caused havoc had to uninstall the 2008 version and then uninstall our EMP and reinstall and then we are fine...

  JTS

• Database service starts does not automatically

  I've set up a new service of database on a cluster of 3 nodes running 11.1.0.6 and I can start service manually without any problem, but if I bounce the database, the database service does not automatically start even if the database is running - what is the procedure to make sure that the service starts automatically with the database?
  
  Thank you

  short answer - service_name parameter. Longer answer as well as a very useful document is at http://www.ardentperf.com/pub/services-schneider07.pdf

  illustration

  SYS @ DB10G >SHOW PARAMETER SERVICE_NAMES
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  service_names                        string      db10g
  SYS @ DB10G >HOST LSNRCTL SERVICES
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:18
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "db10g" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10gXDB" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "D000" established:0 refused:0 current:0 max:1002 state:ready
           DISPATCHER 
           (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
  Service "db10g_XPT" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  SYS @ DB10G >ALTER SYSTEM SET SERVICE_NAMES=DB10G,MY_SERVICE
    2  ;
  
  System altered.
  
  SYS @ DB10G >ALTER SYSTEM REGISTER
    2  ;
  
  System altered.
  
  SYS @ DB10G >HOST LSNRCTL SERVICES
  
  LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 10-SEP-2008 13:41:48
  
  Copyright (c) 1991, 2007, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
  Services Summary...
  Service "MY_SERVICE" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10g" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  Service "db10gXDB" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "D000" established:0 refused:0 current:0 max:1002 state:ready
           DISPATCHER 
           (ADDRESS=(PROTOCOL=tcp)(HOST=XXXX)(PORT=4370))
  Service "db10g_XPT" has 1 instance(s).
    Instance "db10g", status READY, has 1 handler(s) for this service...
      Handler(s):
        "DEDICATED" established:0 refused:0 state:ready
           LOCAL SERVER
  The command completed successfully
  
  SYS @ DB10G >
  

  Niall Litchfield
  http://www.orawin.info/

  Published by: Niall Litchfield Sep 10, 2008 12:42 TO REMOVE the server name.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• McAfee file is not found when I try to start the services stopped in the Computer Management Console.

  McAfee services ceased.  When I go to Services and try to start I get an error 2, "the file is not found."  I look in the programs and the file seems to be there.  I believe that the services were stopped due to Game Booster (which has stopped some services when you are playing a game).  I had turned on Game Booster, then I shut down the system without return - turn off Game Booster I believe that some of my services won.

  Uninstall mcafee in any case, his despair. Or uninstall it then reinstall it

• How to create services start and stop the script of automation for different servers

  Hi all
  
  I want to create a file bat for automation object, start and stop services
  I have some services in 1 server and a server in 2nd and some servers in 3rd.
  has you all know that I have to follow the sequence to start and stop services can all help me in creating .bat combining 3 servers fo start and collapses of the services.
  
  Thanks in advance
  
  Concerning
  SM

  the location of your batch file should not matter

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 3

  During the installation of Microsoft Service Pack 3, I get the message "The expected Version of the product is not found on the system."

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Downloads of SP3: -.

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  How do you know if you are running a 32 bit / X 86 or 64-bit computer

  1. Click Start.

  2. Do right click my computer and then click Properties.

     • If you don't see "x 64 Edition" in the list, then you are running 32-bit Windows XP.

     • If "x 64 Edition" is listed under system, you are running the 64 bit version of Windows XP.

• View CD can't mistake of player Director, was not found in the object #getPropRef, Script error. Continue?, yes no

  OT: Error player Director, not found in the object #getPropRef, Script error. Continue?, Yes No. nursing student cannot run his CD CD practice to work on other laptops. but not on it!

  Nursing Student cannot carry out its practice CD which comes with Prentice Hall Nursing book: "medical and nursing care 2nd edition, comments & justifications surgical."  CD works on PC and a laptop running Windows XP, Vista and Windows 7 and on an iMac; but not on it!  She has a Toshiba laptop with Windows Vista Home Premium and it just doesn't work!  My wife has lent her one of its laptops with Windows Vista, but the CD works fine.  What is the problem? I called Prentice Hall and got no help from them!  They said it was a computer problem.  This student is an exchange student and she would really any help.  I tried to clean the system and even tried the Optimizer5.2 perfect for the correction of errors in Script, but it didn't work.  Help please!  My only recourse is to backup all files and wipe the disk clean and start again to do a reinstall of all applications.  Any other ideas?  She had the phone since 2005 and the hard drive has only about 30% free space left on 147 GB.

  Hello cobblestone47,

  1. What is the version of the steering drive you use on your computer?

  2. the other users who are able to play the CD using the Director or shockwave player player is

  Player de Macromedia Director is also known as the Shockwave Player. I suggest that you uninstall the Director player and install the latest version of Shockwave player, and check if you have the same problem.

  You can follow the link below to download and install the latest version of Shockwave player:

  http://get.Adobe.com/Shockwave/

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin