The SG300 1.3.0.59 firmware bug

Similar Questions

• The SG300 1.3.5.58 firmware upgrade problem

  Hello

  We have two new switches SG300 managed. I updated the firmware of the stock to 1.3.5.58 without problem, but when I upgrade to the new firmware - 1.4.x I get the following error on the two switches:

  The files transferred: 7011840
  Status: Failed to copy
  Error message: copy: the code SW file size is more

  No idea what is the problem? I can't find any option to delete old images. Thank you

  Hello

  you do the upgrade via the web interface? I did the upgrade of 1.3.7.18 without any problem.

  What is your bootloader version? 'show Version' on the command line.

  Kind regards

  Lukasz

• Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you

  Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?

  When the same text is seen in another browser, it is displayed correctly as "two."

  The same question is displayed on another computer.

  Thank you.

  Sounds that you use a font that supports ligatures (Palatino?).

  • http://en.Wikipedia.org/wiki/Ligature_%28typography%29

• The SG300 can act as a DHCP server in L2 mode?

  Hello

  The SG300 can act as a DHCP server in L2 mode? I guess not, but the GUI allows the DHCP server to activate in L2 mode, so I wonder if thre is a way to do this.

  Thank you

  Bob

  Hi Robert, unfortunately he can't.

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• Can write us "PowerCLI Script" to get the details of card RAID HP (Firmware & Driver)?

  Can write us "PowerCLI Script" to get the details of card RAID HP (Firmware & Driver)

  For example: native ESX command below shows desired output for me.

  But we needed equality PowerCLI ESX command below script

  # cat/proc/driver/cciss/cciss0

  cciss0: HP Smart Array P400i controller

  Board ID: 0x3235103c

  Firmware version: 7.22# cat/proc/driver/hpsa/hpsa0

  hpsa0: HP Smart Array P410i controller

  Board ID: 0x3245103c

  Firmware version: 5,70

  Driver version: HP HPSA driver (v 5.0.0 - 17vmw)

  The extracted following PowerCLI you will get server and type of controller, firmware version and the hpsa/Smart Storage Array controllers driver version based of:

  Get-VMhost | Sort | Select Name, Model,@{N='Controller Type'; E={(Get-VMHostHba -VMHost $_ | ? {$_.Model -imatch '.*(hpsa|smart).*'}).Model}},@{N='Controller Firmware'; E={($_.ExtensionData.Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | ? {$_.Name -like '*hpsa*firmware*'}).Name}},@{N='hpsa Driver Version'; E={($_.ExtensionData.Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | ? {$_.Name -like '*scsi-hpsa*'}).Name}} | Format-Table -Autosize
  

  The sample output:

  
  Name                     Model                Controller Type   Controller Firmware                           hpsa Driver Version----                     -----                ---------------   -------------------                           -------------------esxihost1022.local    ProLiant DL380 G6    Smart Array P410i    HP Smart Array Controller HPSA1 Firmware 6.40    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1023.local    ProLiant DL380 G6    Smart Array P410i    HP Smart Array Controller HPSA1 Firmware 6.40    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1024.local    ProLiant DL380 G6    Smart Array P410i    HP Smart Array Controller HPSA1 Firmware 6.40    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1033.local    ProLiant DL360p Gen8    Smart Array P420i    HP Smart Array Controller HPSA1 Firmware 5.42    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1034.local    ProLiant DL360p Gen8    Smart Array P420i    HP Smart Array Controller HPSA1 Firmware 5.42    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1041.local    ProLiant DL380 G5    Smart Array P400    HP Smart Array Controller HPSA1 Firmware 7.24    VMware scsi-hpsa 5.0.0-17vmw.500.0.0.469512 2011-08-19 01:58:59.000esxihost1042.local    ProLiant DL380 G5    Smart Array P400    HP Smart Array Controller HPSA1 Firmware 7.24    VMware scsi-hpsa 5.0.0-17vmw.500.0.0.469512 2011-08-19 01:58:59.000esxihost1160.local    ProLiant BL460c Gen8    Smart Array P220i    HP Smart Array Controller HPSA1 Firmware 5.22    Hewlett-Packard scsi-hpsa 5.0.0-40OEM.500.0.0.472560 2012-08-24 21:04:51.000esxihost1161.local    ProLiant BL460c Gen8    Smart Array P220i    HP Smart Array Controller HPSA1 Firmware 5.22    Hewlett-Packard scsi-hpsa 5.0.0-40OEM.500.0.0.472560 2012-08-24 21:04:51.000
  

• I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  Note that iOS signature is only available on Mac. If you're on a Windows machine, you won't see the iOS tab.

  Neil

• Page setting for the Port SG200-26 1.4.0.88 corrupt firmware / Firmware Bug?

  Hello

  After the upgrade to 2 switches SG200-26 version 1.4.0.88 firmware, I am unable to set up the CONFIGURATION of the PORT page.

  See the attached images.

  Must be a bug in the firmware.

  Please notify for the solution!

  Hello Dimitris,

  According to the instructions mentioned in the release notes, the downgrade is possible. Please you have the boot updated as well (it is a part of the firmware package)? (answer to this question does not depend on possibility of downgrade).

  What about other browsers, don't know you the same problem with Firefox or Chrome?

• The SG300 - 28 p - Firmware upgrade error

  Greeting is I downloaded Sx300_FW_Boot_1.4.0.88 update of firmware for switch SG300 - 28 p. The MD5 of the file signature match as listed on Cisco, but when I'm the download of the firmware (file .ros) to the switch I get the error message:

  Bytes transferred: 7011840

  Status: Failed to copy
  Error message: copy: the code SW file size is more

  Anyone else having the same problem? No work around?

  Thank you!

  Parth.

  Hello

  I like to think to upgrade the bootloader file(sx300_boot-13506.rfb) first, before trying the firmware. Boot loader are on the same zip folder as the firmware.you can use TFTP server to upgrade the bootstrapper.

  Interface WEB SG300 Cisco > Administration > file management > TFTP... When you select TFTP option for the fw 'BOOT' button is now available. Just type the name of the file and it should load the boot firmware.

  concerning

  Deborah

• NETGEAR D6000 (Possible Firmware Bug)

  Hello

  About a week ago, I bought a Netgear D6000 - 100AUS ModemRouter. I have it configured manually and everything went well, I was online in 10 minutes. After completing the configuration, I noticed the Firmware update notification on the WebUI devices. I've updated, everything went well.

  Probably the next day, I got home to discover most (if not all) connected devices had issues. The DNS servers configured in the modemrouter were not meet. I think actually fairly quickly that it could be a problem with the firmware up-to-date mixed with the old configuration data saved in the device, so I restored the factory setting and set up again (this time with the Wizard). No problems.

  I get home today, same problem. I discovered that the DNS servers configured in the modem (Googles DNS 8.8.8.8 and 8.8.4.4) were not meet. I can work around this by assigning the DNS server on the computer or the device. DNS servers responded very well, so it was something to do with the modem.

  When this problem occurs, the routers WebUI responds very slowly. As I speak of ~ 5 minutes before I get a login prompt. And it's also across all devices. So this deffinately not a line problem, it seems more like a bug in the firmware. I was talking to a technician on the live chat and he advised me to post here. I hope that someone will see it and maybe work with me to resolve the issue.

  In addition, it is pretty weird. I have an old ISP Telstra has published ModemRouter, it is a Netgear DEVG2020 and looks like it is running similar firmware. That's what I had before, I got off a friend after my prior ModemRouter (TP-Link (A) has been damaged. I couldn't make it work like a ModemRouter and assumed that it was because I didn't have a Telstra business account (it is what it was for). So I got an old Telstra Modem, I have had and used the DEVG2020 just a router. And he was constantly the same f r e a k I n g question. For a long time, I had all devices in the House that is configured with its own DNS to work around him. So yes, I don't know if this information will help you. All I can think is a problem of firmware. But I have no idea. I intend on the Netgear to return next week, but I'm happy to stay with her a little more if a firmware update on the way.

  Thank you!

  I got it exchanged for a Technicolor. No problem now. Deffs a firmware issue.

• XF270HU Overdrive and firmware bugs

  I have a few things I need addressed.

  The XF270HU uses the same panel as the XB270HU, the AUO - M270DAN02.3. The equivalent G-Sync monitor has only a displayport.

  So why the XF270HU cannot use Overdrive when connected through DP. He can use it to HDMI, but I do not use HDMI for FreeSync.

  Bugs in the firmware:

  (1) the indicator number of B gain is not up-to-date. I just need what the value is in the gain G. It adjusts the actual color not only the indicator. See http://i.imgur.com/I3J3x6h.jpg

  (2) the settings that are saved in the slots of game Mode 1,2,3 are not saved when the monitor sleeps / turns off.

  erbury1983,

  Sorry if I wasn't clear. Overdrive is 'set' with Freesync enabled on the Displayport. This is the reason that overdrive is not configurable in the OSD menu. He was already working.

  Freesync does not work via HDMI, so Overdrive can be enabled/disabled with HDMI.

  Cory

• New Firmware Bug - 1.02.26

  To Sandisk...

  Have updated the new firmware and have found a bug. Earlier, I tried to delete a video. The video has been removed, but the entry (name) was still in the list. When I tried to play the deleted video once again the player has frozen. Had to do a hard reset to turn off the player. Only an update of media corrects this.

  For me it should have been found and corrected until the firmware has been released. Hope this can be fixed quickly. THX.

  oobergeek wrote:

  To Sandisk...

  Have updated the new firmware and have found a bug. Earlier, I tried to delete a video. The video has been removed, but the entry (name) was still in the list. When I tried to play the deleted video once again the player has frozen. Had to do a hard reset to turn off the player. Only an update of media corrects this.

  For me it should have been found and corrected until the firmware has been released. Hope this can be fixed quickly. THX.

  [SOLVED]

  Backup everything on your drive and format the drive again using the FORMAT command in the menu of settings on the "rocket". Put the content back on your rocket and the problems disappear.

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• The El Capitan Mail smart folders display bug?

  I upgraded from 10.10.5 to 10.11.6.

  Mail.app is having display problems in smart folders.

  When I click on a smart folder, it lists the previews/messages like this:

  

  As you can see, the content of the Panel overview/list more jammed to the left.

  The only way I found to restore it how it should be, is to adjust the width of this Board. As soon as I set (even by a just a pixel, so be it) messages are again occupy the entire width.

  But if I switch switch to another folder, and then return to a smart folder I "fixed", it will again appear incorrectly. If the "fix" lasts as long as I still watch one of this file.

  I restarted the post, and it has no effect.

  Is this a known bug?

  Is there a suggested way to try to resolve this? Basically, he made unusual Mail to me (or, at least, considerably annoying to use).

  If it's just the smart dance which gives bad try this.

  Exit the Mail.

  In the Finder, select go, then go to the folder and paste the path below into the box and click Go:

  ~/Library/Mail/v3/MailData/SmartMailboxesLocalProperties.plist

  In the window that opens, select the file SmartMailboxesLocalProperties.plist and move it to the trash, but do not delete it. Start Mail and see if it works now.

  In case of problem, you can always leave Mail, open the Recycle Bin, right-click on the file and choose put back to restore and replace the new file created.

  If the above does not work, try this:

  Exit the Mail.

  In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

  ~/Library/containers/com. Apple.mail

  Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

• The DVD of my Tecra A3 firmware update.

  I couldn't use the update of the current firmware on my drive UJ-830 s the program tell me that the "target drive is not connected", what should I do?

  Hello

  The update of the firmware is for the UJ-831, not the UJ-830. If you don't need it for the DVD player you have.

  Willow

• "Back" button does not when the link is opened in new tab Bug?

  Hi, whenever I open (FFox4 RC1) right mouse button link and "Open in new tab" I can't use the 'back' (top left) arrow in this new tab open. That's all just idle, regardless of how many new sites I open (by simple click, links). Is - this bug browser or my system?
  + There is a possibility to choose which site visited, I would like to return (with the forward/back arrows), is it still possible in FF4?

  I see that you can find the SOLUTION yourself, it was causing the problem McAffee Site Adviser