The shock wave problem

Similar Questions

• Is there an alternative to the shock wave?

  It keeps crashing, I use Google chrome for my default browser.ty

  Hi Larry,

  You can check out the link and check if it helps.

  Adobe Shockwave plug-in

  I would say to contact Google chrome support for assistance.

  http://support.Google.com/chrome/?hl=en

  For alternatives to the shock wave, I suggest you to search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please report if you have any questions on Windows. We will be happy to help you.

• I tried to update the shock wave and it will not be updated.

  I tried to update the shock wave and it will not be updated.

  Original title: I have a lot of problems with my laptop

  Try to uninstall then reinstall Shockwave.

  More info on Shockwave here...

  http://www.Adobe.com/support/Shockwave/FAQ.html

• PC, vista... Adobe shock wave crashing, any other available?

  for several months the entire system has been crashing, wedging on and freeze completely. Micrsoft then found missing driver (what he knows) they have re-installed and things seemed fine for mth then really, things started to repeat itself. know while using Fb game with friends of the shock wave adobe (?) crashed has stopped working all together. deleted and reinstalled 3 times and there is 6 hours and know its slowdown and start stop again... follwed all the suggestions to allow but can't seem to make it work. IIS it appearance DEP kill or...   Rolanda

  Hello
  1 is it a problem when you play games on facebook?
  2. What is the exact error message?
  3. where have you installed shockwave?
  4 are you using Internet Explorer. If Yes, what version of IE are you using?
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

  Follow the suggestions and see that I won't help.
  You can install shockwave and flash player in a clean boot state.

  Step 1: Clean boot
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2: Download link for Shockwave.
  Adobe Shockwave Player
  http://get.Adobe.com/Shockwave/
  Adobe Flash Player

  http://get.Adobe.com/flashplayer/

  See also:
  Solve game problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-game-problems
  Optimize Windows Vista for better performance
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• I use Google chrome and shock wave crashes all the time

  I use Google chrome and shock wave crashes all the time

  Google Chrome and Adobe Shockwave aren't Microsoft products.

  Without a message from the error 'event', he probably does not have an answer that remove and re-install the latest versions of each.

• Simulate the sine wave using LabVIEW FPGA with NOR-myRIO and display in real time

  Hello

  I'm relatively new to LabVIEW FPGA. I am trying to test (and later apply) controllers high speed on myRIO.

  At this point, I'm trying to simulate the sine wave from 1 to 10 kHz using Sinewave generator VI express. I also intend to display the sine wave on the time real (RT) using FIFO. However, I had a bit of trouble to understaing various synchronization parameters.

  1. how to encode information about the sampling frequency generating sine wave? (The side FPGA vi requires only the frequency of the signal and possibly phase and does not rate update lines)

  2. how to estimate the number of items in a FIFO? (that is, the relationship between the rate of updates to loop (RT), the signal frequency, sampling frequency and the number of items in the FIFO)

  It would be great if we could share a very simple program (side host and target) that did something similar.

  Thank you

  MILIN

  Milot,

  I think the problem is the type of data in your FIFO. Your FIFO is configured to use a data type of I16. The problem is the number, it displays only ever will be-1, 0 or 1. To resolve this problem, you must send the sine wave as a fixed point data and convert it to a double on the side of the RT. This should significantly improve your resolution.

• On the audio recording problems

  Hi all

  I have a problem with regard to save audio files in Labview.

  In my program, I acquire the audio signals of the soundcard of the PC constantly and save them in a queue. After that certain prerequisites are activated, these audio signals in the queue is stored in a .wav file. This program works well, except a problem, which is the time lag in this .wav file. For example, I save a sound segment for about 30 seconds, but after the backup, this .wav file is just 21 long s. It contains all of the original recorded segment, but the time axis is compressed, which sounds like played fast. I searched all day and could not find any information about it.

  These sounds record and save functions are part of a comprehensive program, and I'm sorry that I can't give a single vi on it. I add the numbers below and I hope it helps. I am also willing to provide any additional information.

  PS: I have reviewed the incompatibility caused by approximation of the "t0" (published in http://forums.ni.com/t5/LabVIEW/Time-mismatch-with-Sound-Input-Read-VI/td-p/1385404 ) and compensate for that during the savings phase. (see figure 2)

  Thank you very much for the help!

  

  

  Hi, Vans,

  Thank you for your response.

  For your questions.

  1. I'm using Labview 2011 sp1 on Windows 7/Xp. I tested the program on desktop computers and laptops. I don't know about the types of sound card, but given that this problem occurs on several different computers, I think that this is not the problem of sound cards.

  2. for the sound card sampling frequency, in fact I checked that. I read signals of waveform of the 'read.vi of sound entry' and the term 'dt' is equal to 1 on the sampling frequency. So I think that the sampling rate of the sound card is correct.

  In fact I have just solved this problem by myself, but the solution is pretty weird. I think there are two reasons that caused this problem.

  1. when I receive tones of "read.vi of sound input", I first save them in a queue. Once the acquisition is completed, I save all the signals in the queue to a .wav file. But I'm going to do to overcome the overlapping sound and the gap caused by the "t0" reconciliation, a waveform signal re - organize before saving it, as below. According to my knowledge, I think that this 'dt' in the resulting waveform (indicated by the arrow) must be the same as before, but in fact it is not, and it becomes 1.

  

  2. Thus, to solve the first problem, I manually change the term "dt" once again as below. After the change, I'm sure that the "dt" is back to the correct value. But then is the strange thing is I saved the same signal waveform in two different ways, using "his write.vi file" and "file its writing simple.vi" respectively. The first method is the one I have used before and it caused the problem I posted here. The second works. In my program, I put as 16 kHz, 16 bits/sample, and 1-channel sampling rate. The file .wav from the first method has a strange flow 705 bps and the wave from the second method file has the right bitrate which is 256 bits/s.

  

  I tested the program of hundreds of times and each time he acted like I described above. I don't know if anyone has ever faced the same problem as me, but I hope that my solution can be useful for others. And I also hope to be useful to improve your LabView products.

  Thank you for your time.

  Best regards

  Sun87

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• The sine wave generation

  Hi guys,.

  Sorry I have a very simple problem. But it seems that I am too new to LabVIEW... and / or have no idea. I've tried a few things but nothing worked propperly.

  I need to generate a sine wave with the following of the flexible parameters.

  f = 0.02 Hz... 10 Hz

  Range = 0... 500

  Offset of 1500

  I would like to see a cursor moving and get off after the sine wave. The parameters should be changed at any time that the generation of the sine wave inside a While loop. If that would work I intend to integrate that in the code I wrote for an Arduino, Makerhub, slavery... The values already referring...

  I tried allmost all the generation of singnal live that I could find but nothing has worked. Calendar completely proven on a waiting insid the while...

  Frequencies below 1 Hz is the fast cursor again... WTF...

  A sinusoidal 1 Hz signal should make the cursor up and down 1 times per second... or am I totally wrong.

  Ah... Perhaps another question. If possible, I want to count the period. For example, after 4 times of the sine wave stop all programs.

  Any help apprechiated... I work with LabVIEW 2012SP1

  First of all, please understand this waveform generating function works. You specify a waveform (amplitude, frequency, etc.) and whenever you call the function, it returns all the wave specified points.

  You can set the number of points with the #s of the info of sampling pole control. As you put the function in a loop, each itaration gives you #s number of points (1000 in your case). You always get a sine wave on your cursor because each iteration returns a different set of 1000 points (this is because of the method, the function calculates the waveform).

  The easiest way to create a sine wave is using the sinus (mathematics, primary, Tigonometric, sine) function. You must use the iteration of the I of the loop counter so that the entry of the sine function. Note that the entry is in radians.

  With a little math, you can easily produce and display a sinusoid at 1 Hz.

  

  Kind regards

  Adam Boros

• Droid can't take the heat (wave)?

  Everyone knows repetitive reboots of their droids during the heat wave in the Northeast?

  Some friends and I shared a House Beach in recent days.  Today (2010-07-06) was the hottest day of a heat wave in the Northeast.  Two of my friends and I have the droids.  During the heat wave, our devices would randomly restart.  My two friends had today a handful of restarts.  But my Droid over and over again re-initialization.  A battery pull did not help.

  We returned to the Manhattan afternoon (it was 103F).   I spent about an hour in my air-con apt for about an hour and stopped phone to re-boot. I decided to visit my local VZW in any case.

  The technician said that she would have to perform a hard reset of the device.  And she said that sometimes a misapplication can cause this problem.  I informed her that my friends have experienced the same problem. She replied that she could only do a hard reset at this time.  And if the problem persists after that, she could discuss other things.

  Well, well.  But I've been to the a/c since then.

  Someone else has the same problem?

  -Phil

  I do not know the results of your diagnosis of safe mode, but if I had TO choose an application from the list which might be most likely to be a problem, I would choose Weather Channel.    -Dan

• IOException reading the client via the applet WAV

  I managed to activate an Applet allow playback of files from a client computer, using the JNLP API. The following code returns a diagnosis that indicates the selected file is readable.

      InputStream in = null;
  ...
      vsg.updateDiagnostic("about to try fos instantiation");
      FileOpenService fos = (FileOpenService) 
      ServiceManager.lookup("javax.jnlp.FileOpenService");
      FileContents contents = fos.openFileDialog(".", new String[] {"wav"});
      if (contents != null) 
      {
          in = contents.getInputStream();
          if (contents.canRead())
          {
              vsg.updateDiagnostic("can read");
          }
      }

  However, I throw an IOException when trying to instantiate an object of AudioFileFormat this InputStream as follows:

      AudioFileFormat aff = AudioSystem.getAudioFileFormat(in);

  The same WAV file loads very well when I run this program with the following code in the context of "application", where fs is a JFileChooser.

      File soundFile = fs.getSelectedFile().getAbsoluteFile();
      AudioiFileFormat aff = AudioSystem.getAudioFileFormat(soundFile);

  An InputStream is considered an argument for the getAudioFileFormat() method, Yes? And I've checked that the newly-created InputStream was readable.
  
  Any thoughts on what I might be dominant? I am so new JNLP I don't know if there are some aspects of the Applet context, which is a problem. I should post this question in the forum JNLP and WebStart?
  
  I write the Applet on a remote site via FTP, going to the site with a Mozilla Firefox browser and you try to play a file from "My Documents" from my computer area.
  
  Thank you for your time and help!
  
  Published by: 807197 on June 30, 2011 12:18 AM

  You could try to load all of the input stream provided by the FileContents in a ByteArrayOutputStream. Provide the byte [] than to the constructor of a ByteArrayInputStream & use the BAY for other operations.

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• After the upgrade to Firefox 5, I get a message: "Firefox is currently in offline mode and cannot browse the Web." IE 9 connects to the web without problem. Suggestions?

  This began immediately to FF5.0 installation after the upgrade to FF3.6.18. I uninstalled and reinstalled both 3.6.18 FF and FF 5.0: the old version connects to the web without problem, but FF5.0 never does. IE9 is able to connect properly.
  Thinking that my firewall software (McAfee) might get in the way of FF5.0, I uninstalled, but remained the connection problem.

  Check this setting:

  • File > [] work offline

• When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its id.

  When I updated the shock of the clans for my daughter on his iPad, it has its own apple ID. and iCloud, my ID apple came on his id for the update, where it has its own apple ID now. Please can someone tell me why the update came not through its ID thanks

  It seems that if the application has been downloaded on his iPad while it is connected to your Apple ID. If so, he'll always want to be updated with your Apple ID.

  You must remove the application from his iPad and then download it again while it is connected to its own code of Apple.

• Satellite A210 PSAFGC - Bios Update to get rid of the white screen problem

  I also have the white screen problem and I would like to update my bios to version 1.30, it came with.
  The problem I have is that I have a number of room A210 model PSAFGC.
  Support bulletin 98082422 for the update of the Bios does not have my room exactly number and I can not find something for my model.
  The 2 updates are at 1.70 and 1.90. I read the text of these two, and they seem quite different.
  Don't know what to do. Here is the info of the bulletin.

  Resolution:

  Update the BIOS of the computer to resolve this problem, by clicking on the link in the following list for your computer model.

  -Satellite A210 / A215, Ref. PSAFGU: BIOS version 1.70
  -Satellite A210 / A215, Ref. PSAEGU and PSAELU: BIOS version 1.90
  -Satellite Pro A210 / A215, Ref. PSAFHU: BIOS version 1.70
  -Satellite P200D / P205D, Ref. PSPBLU and PSPBQU: BIOS version 1.40

  REF. of the computer it is printed on a label on the underside of the case.

  Any help?

  Hello

  The Satellite * A210 PSAFGC * series seems to be a Toshiba * Canadian * series and I would recommend checking the Canadian driver Toshiba page if you want to download the compatible BIOS for your laptop.

  Here is the link to the page:
  http://support.Toshiba.ca/support/download/ln_bymodel.asp

  Best regards