The sideview app doesn't seem to be ompatible with my bravia kdl-60r550A. What can I do, ad I wou

Similar Questions

• I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install.

  Windows Easy Transfer of 64-bit to 32-bit, or vice versa

  Hello

  I'm trying to fix my settings my current machien to a W7 VM user to make sure that I have the transfer settings and I get all the information I want.  My machine is 64 bit, but the VM is 32-bit.  I can't seem to get the easy transfer Windows from Windows Vista to play with Windows 7 easy transfer and can't seem to install the transfer Windows 7 because it gives me only a 32-bit version to install...

  How I have a 64-bit Windows 7 Easy Transfer to install and if I get one to install and build a transfer saved the data file has there 'restore' on a 32-bit Windows?

  George George P Botuwell, programmer

  Hi George P Boutwell,.

  Thank you for using answers Forum.

  I think that VMware has a 64-bit/function version. You will need to contact them to verify this.
  64-bit to 32-bit is not supported by Windows Easy Transfer, as far as I know.

  I hope this helps.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• YouTube app does not save username and password on Sony Bravia KDL-55HX820

  Hi all.

  The youtube on my Bravia app always worked ok, but lately the app raises questions. I can connect ok but if I refresh or exit the application, the connection information is lost each time.

  Model: Sony Bravia KDL-55HX820
  Firmware: PKG4.021GAA - 01-04 (last)

  If anyone can help?

  Thank you

  my youtube app is not save username & password on Sony Bravia too! It happened only yesterday. Can someone please?

• I did a (destructive) system restore on my pc at home. When it comes to apps reloading section, it sticks to loading 0f 18 64 (wildtangent games) what can I do?

  I did a (destructive) system restore on my pc at home.  When it comes to apps reloading section, it sticks to loading 0f 18 64 (wildtangent games) what can I do?

  Contact the system manufacturer for assistance

• Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update

  Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from the pc. KB2698365 is 'important', so I tried to install it several times, but always failing with error code 80070570. I've been on a boring treasure hunt for to install this 'important' update, it seems to find no will to give helpful advice anywhere. I would appreciate help installation of this major update, and talk about normal advice, how to install it successfully without failure of the error code 80070570. What is the error code 80070570.? I use windows vista Home premium, service pack 2, 32-bit operating system. I'm using the essentials of security. Thank you for the consideration of this issue. NIC

  Hi, Grizzly7659,

  Follow the instructions given by Taurian & guenoun

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/a2df7d06-BE9B-4554-b796-c52fac838842

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/51c5b0d3-BFDD-4f69-bff7-623954866b59

• I bought the wrong update, I need a Mac Version but ordered a Windows Version. What can I do?

  I bought the wrong update, I need a Mac Version but ordered a Windows Version. What can I do?

  I did exactly the same thing and contacted their customer service on the live chat. It took about an hour before someone was available, but he did return to normal and they also send me a box version that allows the two platforms at the same price. They just canceled my purchase of Windows, placed a Mac purchase on their system, sent me a new serial number and published records canned.

• How can I remove the button from menu? The custom option doesn't seem to work for this.

  How can I remove the button from menu? [This IChing looking for three line on the toolbar icon].

  The tool bar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I would trade on the NoScript icon.

  Hi, I can not recommend that you do, but if you are really determined, this article can help.

• Genius app doesn't seem to work

  Hello

  I have a few drawings illustrator requiring Arab labels so I read about advertising on the apple store and bought the Arab genius, whose ads say will allow illustrator make correctly Arab.

  Two questions:

  (1) I cut and paste the labels in Illustrator drawing acrylic = آکریلیک is the word Arabic illustrator reverse. Arab engineering has not helped Adobe to render the words backwards. It seems that all the software on Earth has no qualms about right to left except Adobe. (I pay $2 800 upgrade Adobe illustrator for right to left fonts).

  (2) I paid for engineering on the Apple store, but never had an acknowledgment even if only one window says that I bought.

  Engineering actually works and why not purchase by credit card at apple is not displayed?

  Garrett

  Have you contacted the people who make the Arab genius?  What do say?  Another place to ask would be the forums Adobe Illustrator.  I doubt that someone here will be able to help with these issues of non-Apple.

  For the issue of the receipt, you will need to contact the store of the call.

• Change the stop character doesn't seem to work

  Hello world

  I hope that this will be a quick fix and I'm just on something stupid!

  In short, I'm doing a LabView program to control a pump syringe via RS - 232. I use a Keyspan USB serial adapter to connect my laptop to the device. After a repair on my own, I was able to download a program HyperTerminal and can communicate with my well pump (change of position, speed, during initialization, etc.). However, when I try to do the same thing with LabView, nothing happens.

  First of all, I can say that LabView sends my pump data, because the light on the USB-serial adapter flashes quickly once (its indication that it comes to Rx/Tx). The same thing happens when I communicate with him via the HyperTerminal program. He seems to be in working condition.

  After a lot of reading posts on this forum and developer of the examples, I think that the problem is to send a character of endpoint with my data string. For example, when I have the program HyperTerminal open, I can enter "/ 1ZR ', which will initialize the pump. That move the pump to its original position and prepares for further information. When I go into the properties of "stop character" in this software, it is said: '13,10"(with the quotes). As far as I know, 13 in decimal is a return carriage (or 0xD hex) and 10 is a line break. I don't know if it sends them both. The company says that my program does not work because my LabView program is probably not send the right stop character.

  I tried almost everything I can think of to change the stop character. I know that the VISA VI set up the Serial Port uses the same settings as my COM port shows when I open Control Panel (9600 baud rate, etc.). I had a big bang and thought that maybe I should check MAX and see what his settings are... they are the same. HOWEVER, when I open the "VISA test Panel" on MAX for my COM port, under "Settings/o", the stop character is set to line feed \n. I have change to \r carriage return, but when I click on "apply changes", I get this:

  SET to 0xD stop character
  No error

  And when I close the Panel test and re - open, always back to \n line break. I also tried to change the setting of "tank of termination" in the VISA set a Serial Port to a constant (as a 13) or control (which I tried like 0xD hex as well as 13 decimal).

  I'm fairly convinced it's the issue... If anyone has any idea on how I can force it to use a carriage return? I even tried to disable 'enable the separation tank' and manually compose a string with a \r at the end, but it does not work either...

  I have attached a photo of a simple VI which shows what I want to do (the 2000ms waiting was put there just so that he would not close the COM port before initialization completed... its useless I think).

  Thanks for your help in advance!

  B

  The stop character with the definition configuration function has absolutely nothing for adding a character of termination in writing. Look at the advanced example for how to do it. In addition, if you want to do with the string you enter, you must activate '-' code display. It is a right click option.

• How can I chat with Apple directly? On the homepage it doesn't seem to be access

  I have a few questions to start with. I am absolutely new to what Apple.

  First thing, I want to know if Apple supports its products via Chat for free or charge phone line/s? alone in only as long you have a product of theirs?

  2. I can't find a link to chat with their tech support on their main Webpage3.

  3. How would you recommend an absolutely new user to learn more about the features, basic use of the iPad 2 and iPhone 4S?  Where to start?

  What is the easiest way to learn the basics. Where?

  Thank you for having responded to this

  If you buy a new product you will have 90 days of free telephone support.

  https://www.Apple.com/support/complimentary/

  There is an online guide for

  iPad: http://help.apple.com/ipad/9/#/iPad9940e497

  iPhone: http://help.apple.com/iphone/9/#/iph9022b9b2f

• list objects all the vAPI tag doesn't seem to work.  Someone at - he accomplished this through the plugin vAPI successfully?

  I'm trying to make sense of the vAPI plugin and also reading books online and I saw no examples of the list of marked objects.  If I access the rest api directly and look at the definitions of resource for com/vmware/vapi/rest/navigation/resource/id:com.vmware.cis.tagging.Tag I see what looks like what I need:

  
  

  {

  'name': 'list_attached_objects ',.

  'documentation': 'from the list {@term} objects attached to the given tag. To call this operation of {@term}, you have the privilege of reading on the input tag. Will return only the objects for which you have read privileges. «,

  'service': 'com.vmware.cis.tagging.tag_association ',.

  'Links':]

  {

  'method': 'POST',

            "href": " https://server.example.com/rest/com/vmware/cis/tagging/tag-association/id: " {tag_id}? ~ action = list-home-objects '

  }

  ],

  'metadata': {}

  'method': 'GET ',.

          "href": " https:// Server.example.com/rest/com/vmware/vapi/metadata/metamodel/service/operation/id:com.vmware.cis.tagging.tag_association/id:list_attached_objects.

  }

  }

  When I try to run it I get an error from the api as follows:

  {

  'name': 'com.vmware.vapi.rest.httpNotFound ',.

  "localizableMessages":]

  {

  "defaultMessage": 'Not found.',

  'id': 'com.vmware.vapi.rest.httpNotFound '.

  }

  ],

  'majorErrorCode': 404

  }

  Anyone here know this api well enough to tell me if I make the correct call and if so can check you if it works?  eternallyfrustratedbyvmware how's this for a tag? hopeijustneededtortfm

  How did you run it? Using plugin HTTP-REST?

  vAPI plugin does not communicate with endpoint vAPI via REST. You can use script objects vAPI automatically generated when you imported vAPI metamodele.

  You can watch 'List all tags' workflow example that comes with vAPI plugin and modify it. The script code might look like the following (endpoint and tagid are input parameters)

  if (endpoint == null) {
    throw "'endpoint' parameter should not be null";
  }
  
  var client = endpoint.client();
  var tagging = new com_vmware_cis_tagging_tag__association(client);
  var result = tagging.list_attached_objects(tagid);
  
  System.log(result);
  

• Sync from the computer to the mobile - it doesn't seem to work?

  Hi all

  I'm sorry to ask something that probably has been asked several times - but I browsed the forum and I could not find the answer.

  I bought access to the creative cloud of Lightroom a week ago and has spent the last days to discover the software - I think I understand how it works now, but there was it still a thing I am unable to do:

  I would like to be able to access the photos I upload in the catalogue from my computer on my IPhone. But for now, it only works the other way around: I can see on the computer the photos that I uploaded from my phone, but when I synchronize my computer collections, they do not appear on my phone. In the cloud, I see only the pictures from my phone.

  How can I solve this?

  Thank you very much!

  Alexandra of France

  Hi alexandrab,

  Could you please check if you are able to see your desktop in the Web Lightroom.adobe.com page collection.

  How many Images your synchronized so far from your mobile to Lightroom?

  When you synchronize images of the version of office that you see a notification in the upper left corner saying "synchronization of the images?

  Concerning

  Sarika

• RoboHelp 2015 "Display the item" button doesn't seem to work

  Hello!

  Here's my problem: when a topic is opened in the design editor, by pressing the button 'Show element' in the Ribbon Edition does nothing. No new window is launched, nothing!

  I am completely new to RoboHelp software and my supervisor is puzzled. If anyone has experienced this problem or know a solution?

  Thank you!

  Hello

  After you click on "View item" and nothing is not displayed, try pressing and holding the key of the Windows logo + left arrow a couple of times.

  If nothing appears?

  See you soon... Rick

• Firefox 6 doesn't seem to work correctly with some Pogo games?

  Yesterday (17/08/11) Firefox automatically updated to 6.0 and now there are some games Pogo that doesn't load not right - it is as if the graphics are all faded and impossible to play the games. I went back to Firefox 5.0, and now there is no problem. I checked to make sure that my driver graphic and Java, Flash Player are all current and they are. I also made my temporary files and cache have been cleared. If some how Firefox 6 has a problem that is in conflict with Pogo

  Check out this list of compatible themes Firefox 6.0:

  • https://addons.Mozilla.org/en-us/Firefox/themes/?sort=updated

  Check and tell if its working.

  To help other users find solutions, please return to this Thread and log in to the forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• Scaling of object doesn't seem to work properly with objects that contain Bézier curves

  I created a closed object which had a Bezier curve as part of its definition. I wanted to scale of 110% and then to use this second object expanded to create a sort of background under the first object to create a sort of a shadow effect. But rather that the second purpose being uniformly superior to the first intersection with the original object in a way that does not make sense to me.

  Is there a more easy/different way to create an effect like that? I can do but have to manually adjust a large number of points in the new object so that they create a uniformly larger version of the original object, but it's a lot of effort for something that works very well for regular polygons with straight lines (for example, a star with 5 points).

  Thanks for any suggestions or ideas.

  -Bubba

  PS - I've attached a picture of what I get with this technique to create two examples of two objects, one a 110% of the other version. The first star shows the effect I'm trying to get, and the second shows the problem (the red border around not the black object evenly around the perimeter)

  

  Try to use a shift instead of trying to evolve.