The snapshot files exist on the data store, but not in the Snapshot Manager

Similar Questions

• VMWare Fusion Pro can see the ESXi data store but not VM on it.

  Hi all

  I have a MacPro 5.1 I am under ESXi on via a USB key. The MacPro has 4 SATA drives configured as stores of data with VM on some of them.

  When connecting to the ESX host through the 'connect to server' Fusion Pro I can see data banks but not the virtual machine.

  The virtual machine can be seen on the ESX host, when connecting via SFTP.

  Any ideas?

  & I thought about it... I need to register for the virtual machine

  as in: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006160

• VM attached to the data store, but not in the config

  I have a few virtual machines that show that they are attached to a store data, but when you look at the parameters of the client both in the vmx file there is nothing that refers to this data store.  And, to top it off, the data store is just a deposit of file I only download iso files to mount for CD-ROMs.  I have made sure that the iso is not mounted on the machine (of course) and have paid through any other part of the config, but still it shows attached to that store of data, by the customer and by a powercli script.

  When you browse the data store, there is no folders or files on there that refer to this virtual machine.  I have about 10 machines all in this difficult situation.  Any ideas?

  Thank you!

  Hello..

  VM snapshots come with a .iso mounted for them? If so, that would explain it...

  / Rubeck

• The data store could not be found.

  Hello!

  I have Esxi installed 4.0 on HP DL 380 G6. I have 2 x SAS (2x146GB) drives and I have also attached storage iSCSI (from HP MSA P2000 G3). on which I recorded a few servers. When I run the script ghettoVCB I get the result:

  /SKRIPTA #./ghettoVCB.sh f lista g /skripta/ghettoVCB.conf
  . / ghettoVCB.sh: /skripta/ghettoVCB.conf: line 14: not found
  Recording output to ' / tmp/ghettoVCB-2011-08-23_12-00-27.log '...
  2011-08-23 12:00:27 - info: = ghettoVCB NEWSPAPER BEGIN =.

  2011-08-23 12:00:27 - info: CONFIG - CONFIGURATION GLOBAL GHETTOVCB = /skripta/ghettoVCB.conf FILE using
  2011-08-23 12:00:27 - info: CONFIG - VERSION = 2011_06_28_1
  2011-08-23 12:00:27 - info: CONFIG - GHETTOVCB_PID = 33245431
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_VOLUME = VMFS/Synology.
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_ROTATION_COUNT = 2
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-08-23_12-00-27
  2011-08-23 12:00:27 - info: CONFIG - DISK_BACKUP_FORMAT = thin
  2011-08-23 12:00:27 - info: CONFIG - ADAPTER_FORMAT = buslogic
  2011-08-23 12:00:27 - info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
  2011-08-23 12:00:27 - info: CONFIG - ENABLE_HARD_POWER_OFF = 0
  2011-08-23 12:00:27 - info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
  2011-08-23 12:00:27 - info: CONFIG - POWER_DOWN_TIMEOUT = 5
  2011-08-23 12:00:27 - info: CONFIG - SNAPSHOT_TIMEOUT = 15
  2011-08-23 12:00:27 - info: CONFIG - LOG_LEVEL = info
  2011-08-23 12:00:27 - info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-08-23_12-00-27.log
  2011-08-23 12:00:27 - info: CONFIG - VM_SNAPSHOT_MEMORY = 1
  2011-08-23 12:00:27 - info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
  2011-08-23 12:00:27 - info: CONFIG - VMDK_FILES_TO_BACKUP = all
  2011-08-23 12:00:27 - info: CONFIG - EMAIL_LOG = 0
  2011-08-23 12:00:27 - info:
  The data store could not be found.

  The data store could not be found.

  The data store could not be found.

  2011-08-23 12:00:36 - info: start backup for Windows 2008 R2 coaching
  2011-08-23 12:00:36 - info: creation of snapshot "ghettoVCB-snapshot-2011-08-23" for Windows 2008 R2 coaching

  2011-08-23 12:03:40 - info: ERROR: error in the backup of "/ vmfs/volumes/4d5ed225-cdb17961-51bb-d8d385ac2800/Windows 2008 R2 coaching / Windows 2008 R2 Podpora_1.vmdk" for Windows 2008 R2 coaching

  2011-08-23 12:03:40 - info: ERROR: error in the backup of "/ vmfs/volumes/iSCSI/Windows 2008 R2 coaching / Windows 2008 R2 Podpora.vmdk" for Windows 2008 R2 coaching
  2011-08-23 12:03:42 - info: Instant withdrawal of Windows 2008 R2 coaching...
  2011-08-23 12:03:47 - Info: backup duration: 3.18 Minutes
  2011-08-23 12:03:47 - info: ERROR: unable to backup Windows 2008 R2 coaching because of the error in VMDK backup!

  2011-08-23 12:03:47 - info: # final status: ERROR: No. VMs saved! ######

  2011-08-23 12:03:47 - info: = ghettoVCB JOURNAL END =.

  I also do backups on iSCSI NAS storage.

  First ghetto script does not detect the data stores that are local disks where I run few servers and secondly I get error of backup server located on iSCSI for HP MSA.

  Thank you.

  Your destination data store is set incorrectly

  VM_BACKUP_VOLUME = VMFS/Synology.

  It should be

  VM_BACKUP_VOLUME = / vmfs/volumes/Synology.

• data store is not big as the player

  Hello

  I just install ESXi 4.1 update 3 on my fujitsu rx300 S3 with 6x500GB ground mounted in a RAID5 configuration, 2 x 1.6 Ghz XEON 5110 and 8 GB of memory.

  The ESX has been successfully installed except the data store: space it is not as big as the player: capacity data store 274 GB then as drive capacity 2, 5 TB.

  The VMWARE KB to extend the data store does not work: it did not drive LUN.

  I don't know how to extend the data store OR create a second, which will be accessible to another ESX.

  Thank you

  Limit is 2 TB less 512 bytes for ESXi 4.1, trying to remove a 500 GB drive in RAID 5 configuration and try to create the data store.

• Download a file from a local data store

  Hi all

  I was wondering if it is possible to generate scripts downloading a file from a local data store on a Windows Server? Also, there are scripts available to perform such a task?

  Thank you

  Hello

  Just guessed myself using the cmdlet copy-datastoreitem - good KB article here

  After the connection to your vCenter server, connect to the data store and mount the source as a PSdrive data store, and then use the cmdlet.  It also works well download a data store and the downloading of a data store: just spent around objects in - point and - Destination.

  At first glance, it seems that you need to know the source path of the data store.

  $dstore = get-datastore "YourDatastoreName"
  
  New-PSDrive -location $dstore -name dStore -psprovider vimdatastore -root '\'
  
  copy-datastoreitem -item dStore:\VMFolder\VMConfig.vmx -Destination c:\SomeFolder\vmconfig.vmx
  

• On my iPad, can I move files from one folder to another, but not in the Preview file, why?

  When you manage files in iCloud, from an iPad, I can move to the files from one folder to another, but not in the Preview file. Secondly, when I check the file Preview to iCloud from Mac content is so different when you look at an iPad. Why is the gap between the iPad and the Mac?

  Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing.

• XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

  someone on this planet knows!

  XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

  Hello
  I recommend that you search/post this question on the link below:
  http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
  b Eddie

• "boot configuration data store could not be opened" when starting bcdedit.

  "boot configuration data store could not be opened" when starting bcdedit. Boot config-dual PREV XP Pro x 64 1st disk; XP Pro 32 on the 2nd disk.  Nuked 1st disk and installed Win 7.  It seems that Windows 7 has not identified the 2nd OS because it wasn't on a partition on the same drive?  All I can find is info on editing an existing data store. I don't see any information on how to create one from scratch, except there is a Create option and the different option, but not how to decide what the values should be. Any help is greatly appreciated.

  Boot from the installation DVD and run Recovery menu. Command prompt.

  bcdedit/export C:\BCD_Backup
  c:
  Boot CD
  BCD attrib s h - r
  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Empty data store will not be in Maintenance mode

  I have an empty data store, which is not in maintenance mode.

  It hangs on 'Waiting for all the virtual machine files be migrated from data store'... which is an expression that is not even appear in Google.

  

  Here are the contents of the data store

  

  I've migrated all guests who have been on it.  Disconnected the ISOs of the hosts that use and deleted all ISOs.

  The related strange thing is that some of the guests who were on the data store are still showing as being connected to it.

  

  Many assume that it is because she is always connected to an ISO image, but as you can see there is no ISO disk images and there is nothing to hide in these files.  I have not had no problem in removing the ISO images, and Yes, I have unplugged ISO images before fast vMotioning of customers.

  Why they always think that they are connected to something I don't understand, but I suspect that it is one of the reasons for my data store does not in maintenance mode.

  I'm under ESXi 5.1.0 799733 (custom build of IBM) on the BladeCenter HS22V blades.  Storage is connected by zFCP to a midsize v7000 IBM.

  I assume that this is a bug in the system.  Please let me know if I'm wrong.

  One of your virtual machines have the pictures that have been taken so that something (ISO, for example) was mounted on this data store?

• data store is not accessible vsphere 4.0

  data store unavailable on vsphere 4.0... We have a server with connection zFCP on hitachi ams2100 datastore and have 2 LUNs connected 4 days ago, I try to restart my host. and all of a sudden one of my lun is not accessible, I already try to Reanalyze the data store. and nothing happens, I always get the error data store can not accessible. any body can help me please...

  is this LUN presented on othe so hosts? If so, then remove the host in question and add it again

  to do a new analysis...

• I can't delete files to clean up existing files. I can my phone, but not my PC

  I can't delete files to clean up existing files. I can my phone, but not my PC

  Hi hugob,.

  You should still be able to delete the files in your Acrobat.com account (and receive a confirmation message "delete file" when you do. If this isn't the case, please clear the cache, and then open a session in https://cloud.acrobat.com/files. When you select a file to delete, you will see a list of options at the top of the list of files - on the far right, you will see the delete option.

  Best,

  Sara

• On windows 7, right click - new - * file * does not appear to create folders, I see other files word, excel etc. are appearing but not "folders".

  On windows 7, right click - new - *file* does not appear to create folders, I see other files word, excel etc. are appearing but not "folders".

  When I try to create Folders by right-click - New, it does not appear.

  Help, please.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
  
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   
   
  
   

• Data store is not mounted automatically after updating the Firmware of the LSI

  I've recently updated the card RAID LSI firmware on my ESXi 5.5 system (patched and update top of page)

  When I rebooted, took place the following:

  1. the associated VMFS volume RAID was mounted

  2. the data on the volume store was not mounted

  I mounted the data store manually and restarted my VMs

  Do I have to re-signing the Volume and/or the data store to raise it properly.

  Steve

  The command should be ok and do the same thing as the command esxcli esxcli storage vmfs snapshot mount -l label|-u uuid (for details, see http://kb.vmware.com/kb/1011387).

  André

• Visible data VMFS store on 3 of the 6 armies. 3 the remaining hosts see LUNS, status is mounted, but the data store is not visible.

  As the title suggests, all hosts see LUNS... can't understand the question. Here is a shot of the vmkernel.log captured from the server, as it was a new analysis (which translates into a loop of activity in the log file and hard + 10 minutes without change for storage).

  The SAN is preesnting LUN and successfully... so it must be on the host side. In an act of desperation, yesterday I reinstalled ESXi on a troubled host. He was able to see the data stores. Today, they were more visible.

  Thanks in advance for any help.

  VMkernel.log:

  (2013 06-26 T 13: 07:56.778Z cpu1:15038) score: 558: entered reading of TPG (hdrlba = 1) doesn't have the 'naa.600144f0f9e18d0000005160917e0001': i/o error

  (2013 06-26 T 13: 07:56.778Z cpu1:15038) Partition: 661: primary gpt table read failed on 'naa.600144f0f9e18d0000005160917e0001 '.

  (2013 06-26 T 13: 07:56.778Z cpu1:15038) ScsiDeviceIO: 2303: Cmd (0x4124003a4680) 0 x 88, CmdSN 0xabd of the world 0-dev 'naa.600144f0f9e18d0000005160917e0001' has no sense H:0 x 2 D:0 x 0 x 0 possible P:0-data: 0 x 6 0 29 x 0 x 0.

  (2013 06-26 T 13: 07:56.863Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.005Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.063Z cpu8:8776) iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410022110b10 network netsched.pools.persist.iscsi associated pool resource

  (2013 06-26 T 13: 07:57.063Z cpu8:8776) iscsi_vmk: iscsivmk_ConnNetRegister: 0x410022110b10 network Tracker id 1 tracker.iSCSI.192.168.70.10 associated with socket

  (2013 06-26 T 13: 07:57.091Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.234Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.378Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.520Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.563Z cpu1:8193) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 07:57.568Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: vmhba38:CH:0 T: 0 CN:0: iSCSI connection is marked as "ONLINE."

  (2013 06-26 T 13: 07:57.568Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: Sess [ISID: 00023 000002 d TARGET: iqn.2012 - 11.com.rhineaux:nex70 TPGT: TSIH 2: 0]

  (2013 06-26 T 13: 07:57.568Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: Conn [CID: 192.168.70.50:49286 r L: 0: 192.168.70.10:3260]

  (2013 06-26 T 13: 07:57.578Z cpu8:8603) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' on the way 'vmhba38:C0:T0:L0' failed: H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 6 0 29 x 0 x 0. Bill: NO

  (2013 06-26 T 13: 07:57.578Z cpu8:8603) ScsiDeviceIO: 2303: Cmd (0x4124003a4680) 0 x 88, CmdSN 0xabd of the world 0-dev 'naa.600144f0f9e18d0000005160917e0001' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 6 0 29 x 0 x 0.

  (2013 06-26 T 13: 07:57.578Z cpu8:8603) ScsiCore: 1483: power - on delivery took place the naa.600144f0f9e18d0000005160917e0001

  (2013 06-26 T 13: 08:07.901Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StopConnection: vmhba38:CH:0 T: 0 CN:0: iSCSI connection is being marked "OFFLINE" (event: 4)

  (2013 06-26 T 13: 08:07.901Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StopConnection: Sess [ISID: 00023 000002 d TARGET: iqn.2012 - 11.com.rhineaux:nex70 TPGT: TSIH 2: 0]

  (2013 06-26 T 13: 08:07.901Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StopConnection: Conn [CID: 192.168.70.50:49286 r L: 0: 192.168.70.10:3260]

  (2013 06-26 T 13: 08:07.901Z cpu10:8778) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 08:07.901Z cpu10:8778) ScsiDeviceIO: 2303: Cmd (0x4124003a4680) 0 x 88, CmdSN 0xabe of the world 0-dev 'naa.600144f0f9e18d0000005160917e0001' has no sense H:0 x 2 D:0 x 0 x 0 possible P:0-data: 0 x 6 0 29 x 0 x 0.

  (2013 06-26 T 13: 08:07.988Z cpu10:13652) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.130Z cpu10:13652) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.273Z cpu10:13652) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.415Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.558Z cpu10:8805) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.558Z cpu10:8805) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 08:08.696Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.837Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.980Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.123Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.265Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.409Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.551Z cpu10:8671) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.565Z cpu10:8202) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 08:09.694Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.838Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.980Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.123Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.265Z cpu10:8778) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.409Z cpu10:8778) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.551Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.551Z cpu10:8202) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 08:10.673Z cpu8:8776) iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410022110b10 network netsched.pools.persist.iscsi associated pool resource

  (2013 06-26 T 13: 08:10.673Z cpu8:8776) iscsi_vmk: iscsivmk_ConnNetRegister: 0x410022110b10 network Tracker id 1 tracker.iSCSI.192.168.70.10 associated with socket

  (2013 06-26 T 13: 08:10.694Z cpu10:8778) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.838Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.979Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:11.123Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:11.178Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: vmhba38:CH:0 T: 0 CN:0: iSCSI connection is marked as "ONLINE."

  (2013 06-26 T 13: 08:11.178Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: Sess [ISID: 00023 000002 d TARGET: iqn.2012 - 11.com.rhineaux:nex70 TPGT: TSIH 2: 0]

  (2013 06-26 T 13: 08:11.178Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: Conn [CID: 192.168.70.50:59905 r L: 0: 192.168.70.10:3260]

  (2013 06-26 T 13: 08:11.191Z cpu12:8204) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' on the way 'vmhba38:C0:T0:L0' failed: H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 6 0 29 x 0 x 0. Bill: NO

  (2013 06-26 T 13: 08:11.191Z cpu12:8204) ScsiDeviceIO: 2303: Cmd (0x4124003a4680) 0 x 88, CmdSN 0xabe of the world 0-dev 'naa.600144f0f9e18d0000005160917e0001' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 6 0 29 x 0 x 0.

  (2013 06-26 T 13: 08:11.191Z cpu12:8204) ScsiCore: 1483: power - on delivery took place the naa.600144f0f9e18d0000005160917e0001

  volumes/vmfs / #.

  Finally I thought of her. The switches have been on a MTU of 9000. I ran each port to the max 9216 and everything works perfectly. A little shocked by him but I'm just glad it is resolved.