VM attached to the data store, but not in the config

Similar Questions

• VMWare Fusion Pro can see the ESXi data store but not VM on it.

  Hi all

  I have a MacPro 5.1 I am under ESXi on via a USB key. The MacPro has 4 SATA drives configured as stores of data with VM on some of them.

  When connecting to the ESX host through the 'connect to server' Fusion Pro I can see data banks but not the virtual machine.

  The virtual machine can be seen on the ESX host, when connecting via SFTP.

  Any ideas?

  & I thought about it... I need to register for the virtual machine

  as in: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1006160

• The snapshot files exist on the data store, but not in the Snapshot Manager

  I searched for a question of space on one of our virtual machines throughout the morning.  I finally found that the virtual machine has two snapshot files (total of 120 GB) on the data store.

  The problem is that these pictures are not in the snapshot

  Manager. How can I get rid of these files from snapshots, recover the 120 GB drive

  space and keep everything in tact?

  Thank you all.

  -Dave Claussen

  [email protected]

  Try to create the new snapshot, and then remove all the...

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• The data store could not be found.

  Hello!

  I have Esxi installed 4.0 on HP DL 380 G6. I have 2 x SAS (2x146GB) drives and I have also attached storage iSCSI (from HP MSA P2000 G3). on which I recorded a few servers. When I run the script ghettoVCB I get the result:

  /SKRIPTA #./ghettoVCB.sh f lista g /skripta/ghettoVCB.conf
  . / ghettoVCB.sh: /skripta/ghettoVCB.conf: line 14: not found
  Recording output to ' / tmp/ghettoVCB-2011-08-23_12-00-27.log '...
  2011-08-23 12:00:27 - info: = ghettoVCB NEWSPAPER BEGIN =.

  2011-08-23 12:00:27 - info: CONFIG - CONFIGURATION GLOBAL GHETTOVCB = /skripta/ghettoVCB.conf FILE using
  2011-08-23 12:00:27 - info: CONFIG - VERSION = 2011_06_28_1
  2011-08-23 12:00:27 - info: CONFIG - GHETTOVCB_PID = 33245431
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_VOLUME = VMFS/Synology.
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_ROTATION_COUNT = 2
  2011-08-23 12:00:27 - info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2011-08-23_12-00-27
  2011-08-23 12:00:27 - info: CONFIG - DISK_BACKUP_FORMAT = thin
  2011-08-23 12:00:27 - info: CONFIG - ADAPTER_FORMAT = buslogic
  2011-08-23 12:00:27 - info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
  2011-08-23 12:00:27 - info: CONFIG - ENABLE_HARD_POWER_OFF = 0
  2011-08-23 12:00:27 - info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
  2011-08-23 12:00:27 - info: CONFIG - POWER_DOWN_TIMEOUT = 5
  2011-08-23 12:00:27 - info: CONFIG - SNAPSHOT_TIMEOUT = 15
  2011-08-23 12:00:27 - info: CONFIG - LOG_LEVEL = info
  2011-08-23 12:00:27 - info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2011-08-23_12-00-27.log
  2011-08-23 12:00:27 - info: CONFIG - VM_SNAPSHOT_MEMORY = 1
  2011-08-23 12:00:27 - info: CONFIG - VM_SNAPSHOT_QUIESCE = 1
  2011-08-23 12:00:27 - info: CONFIG - VMDK_FILES_TO_BACKUP = all
  2011-08-23 12:00:27 - info: CONFIG - EMAIL_LOG = 0
  2011-08-23 12:00:27 - info:
  The data store could not be found.

  The data store could not be found.

  The data store could not be found.

  2011-08-23 12:00:36 - info: start backup for Windows 2008 R2 coaching
  2011-08-23 12:00:36 - info: creation of snapshot "ghettoVCB-snapshot-2011-08-23" for Windows 2008 R2 coaching

  2011-08-23 12:03:40 - info: ERROR: error in the backup of "/ vmfs/volumes/4d5ed225-cdb17961-51bb-d8d385ac2800/Windows 2008 R2 coaching / Windows 2008 R2 Podpora_1.vmdk" for Windows 2008 R2 coaching

  2011-08-23 12:03:40 - info: ERROR: error in the backup of "/ vmfs/volumes/iSCSI/Windows 2008 R2 coaching / Windows 2008 R2 Podpora.vmdk" for Windows 2008 R2 coaching
  2011-08-23 12:03:42 - info: Instant withdrawal of Windows 2008 R2 coaching...
  2011-08-23 12:03:47 - Info: backup duration: 3.18 Minutes
  2011-08-23 12:03:47 - info: ERROR: unable to backup Windows 2008 R2 coaching because of the error in VMDK backup!

  2011-08-23 12:03:47 - info: # final status: ERROR: No. VMs saved! ######

  2011-08-23 12:03:47 - info: = ghettoVCB JOURNAL END =.

  I also do backups on iSCSI NAS storage.

  First ghetto script does not detect the data stores that are local disks where I run few servers and secondly I get error of backup server located on iSCSI for HP MSA.

  Thank you.

  Your destination data store is set incorrectly

  VM_BACKUP_VOLUME = VMFS/Synology.

  It should be

  VM_BACKUP_VOLUME = / vmfs/volumes/Synology.

• data store is not big as the player

  Hello

  I just install ESXi 4.1 update 3 on my fujitsu rx300 S3 with 6x500GB ground mounted in a RAID5 configuration, 2 x 1.6 Ghz XEON 5110 and 8 GB of memory.

  The ESX has been successfully installed except the data store: space it is not as big as the player: capacity data store 274 GB then as drive capacity 2, 5 TB.

  The VMWARE KB to extend the data store does not work: it did not drive LUN.

  I don't know how to extend the data store OR create a second, which will be accessible to another ESX.

  Thank you

  Limit is 2 TB less 512 bytes for ESXi 4.1, trying to remove a 500 GB drive in RAID 5 configuration and try to create the data store.

• "boot configuration data store could not be opened" when starting bcdedit.

  "boot configuration data store could not be opened" when starting bcdedit. Boot config-dual PREV XP Pro x 64 1st disk; XP Pro 32 on the 2nd disk.  Nuked 1st disk and installed Win 7.  It seems that Windows 7 has not identified the 2nd OS because it wasn't on a partition on the same drive?  All I can find is info on editing an existing data store. I don't see any information on how to create one from scratch, except there is a Create option and the different option, but not how to decide what the values should be. Any help is greatly appreciated.

  Boot from the installation DVD and run Recovery menu. Command prompt.

  bcdedit/export C:\BCD_Backup
  c:
  Boot CD
  BCD attrib s h - r
  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Empty data store will not be in Maintenance mode

  I have an empty data store, which is not in maintenance mode.

  It hangs on 'Waiting for all the virtual machine files be migrated from data store'... which is an expression that is not even appear in Google.

  

  Here are the contents of the data store

  

  I've migrated all guests who have been on it.  Disconnected the ISOs of the hosts that use and deleted all ISOs.

  The related strange thing is that some of the guests who were on the data store are still showing as being connected to it.

  

  Many assume that it is because she is always connected to an ISO image, but as you can see there is no ISO disk images and there is nothing to hide in these files.  I have not had no problem in removing the ISO images, and Yes, I have unplugged ISO images before fast vMotioning of customers.

  Why they always think that they are connected to something I don't understand, but I suspect that it is one of the reasons for my data store does not in maintenance mode.

  I'm under ESXi 5.1.0 799733 (custom build of IBM) on the BladeCenter HS22V blades.  Storage is connected by zFCP to a midsize v7000 IBM.

  I assume that this is a bug in the system.  Please let me know if I'm wrong.

  One of your virtual machines have the pictures that have been taken so that something (ISO, for example) was mounted on this data store?

• data store is not accessible vsphere 4.0

  data store unavailable on vsphere 4.0... We have a server with connection zFCP on hitachi ams2100 datastore and have 2 LUNs connected 4 days ago, I try to restart my host. and all of a sudden one of my lun is not accessible, I already try to Reanalyze the data store. and nothing happens, I always get the error data store can not accessible. any body can help me please...

  is this LUN presented on othe so hosts? If so, then remove the host in question and add it again

  to do a new analysis...

• List of virtual machines in the data store but is not registered in the inventory

  I have a perl script that can list all the virtual machines in a datasore given by using the HostDatastoreBrowser object.

  However this only back vms who are registered. I want to be able to find images that have 'removed from the inventory' users but not destroyed on the data store.

  I even reach this may by using the HostDatastorBrowser? If this is not the case, how can I achieve my goal?

  Thank you

  Hello

  You can, but you may need to put the data in a different format. It is actually more a matter of perl a matter of VI Toolkit.

  You must create the appropriate list, then use the PERL map function to evaluate an expr on the entire list. Personally I just use a foreach example statement.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro Articles
  Page top virtualization security links

• Visible data VMFS store on 3 of the 6 armies. 3 the remaining hosts see LUNS, status is mounted, but the data store is not visible.

  As the title suggests, all hosts see LUNS... can't understand the question. Here is a shot of the vmkernel.log captured from the server, as it was a new analysis (which translates into a loop of activity in the log file and hard + 10 minutes without change for storage).

  The SAN is preesnting LUN and successfully... so it must be on the host side. In an act of desperation, yesterday I reinstalled ESXi on a troubled host. He was able to see the data stores. Today, they were more visible.

  Thanks in advance for any help.

  VMkernel.log:

  (2013 06-26 T 13: 07:56.778Z cpu1:15038) score: 558: entered reading of TPG (hdrlba = 1) doesn't have the 'naa.600144f0f9e18d0000005160917e0001': i/o error

  (2013 06-26 T 13: 07:56.778Z cpu1:15038) Partition: 661: primary gpt table read failed on 'naa.600144f0f9e18d0000005160917e0001 '.

  (2013 06-26 T 13: 07:56.778Z cpu1:15038) ScsiDeviceIO: 2303: Cmd (0x4124003a4680) 0 x 88, CmdSN 0xabd of the world 0-dev 'naa.600144f0f9e18d0000005160917e0001' has no sense H:0 x 2 D:0 x 0 x 0 possible P:0-data: 0 x 6 0 29 x 0 x 0.

  (2013 06-26 T 13: 07:56.863Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.005Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.063Z cpu8:8776) iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410022110b10 network netsched.pools.persist.iscsi associated pool resource

  (2013 06-26 T 13: 07:57.063Z cpu8:8776) iscsi_vmk: iscsivmk_ConnNetRegister: 0x410022110b10 network Tracker id 1 tracker.iSCSI.192.168.70.10 associated with socket

  (2013 06-26 T 13: 07:57.091Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.234Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.378Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.520Z cpu1:8193) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 07:57.563Z cpu1:8193) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 07:57.568Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: vmhba38:CH:0 T: 0 CN:0: iSCSI connection is marked as "ONLINE."

  (2013 06-26 T 13: 07:57.568Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: Sess [ISID: 00023 000002 d TARGET: iqn.2012 - 11.com.rhineaux:nex70 TPGT: TSIH 2: 0]

  (2013 06-26 T 13: 07:57.568Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: Conn [CID: 192.168.70.50:49286 r L: 0: 192.168.70.10:3260]

  (2013 06-26 T 13: 07:57.578Z cpu8:8603) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' on the way 'vmhba38:C0:T0:L0' failed: H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 6 0 29 x 0 x 0. Bill: NO

  (2013 06-26 T 13: 07:57.578Z cpu8:8603) ScsiDeviceIO: 2303: Cmd (0x4124003a4680) 0 x 88, CmdSN 0xabd of the world 0-dev 'naa.600144f0f9e18d0000005160917e0001' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 6 0 29 x 0 x 0.

  (2013 06-26 T 13: 07:57.578Z cpu8:8603) ScsiCore: 1483: power - on delivery took place the naa.600144f0f9e18d0000005160917e0001

  (2013 06-26 T 13: 08:07.901Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StopConnection: vmhba38:CH:0 T: 0 CN:0: iSCSI connection is being marked "OFFLINE" (event: 4)

  (2013 06-26 T 13: 08:07.901Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StopConnection: Sess [ISID: 00023 000002 d TARGET: iqn.2012 - 11.com.rhineaux:nex70 TPGT: TSIH 2: 0]

  (2013 06-26 T 13: 08:07.901Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StopConnection: Conn [CID: 192.168.70.50:49286 r L: 0: 192.168.70.10:3260]

  (2013 06-26 T 13: 08:07.901Z cpu10:8778) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 08:07.901Z cpu10:8778) ScsiDeviceIO: 2303: Cmd (0x4124003a4680) 0 x 88, CmdSN 0xabe of the world 0-dev 'naa.600144f0f9e18d0000005160917e0001' has no sense H:0 x 2 D:0 x 0 x 0 possible P:0-data: 0 x 6 0 29 x 0 x 0.

  (2013 06-26 T 13: 08:07.988Z cpu10:13652) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.130Z cpu10:13652) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.273Z cpu10:13652) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.415Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.558Z cpu10:8805) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.558Z cpu10:8805) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 08:08.696Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.837Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:08.980Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.123Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.265Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.409Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.551Z cpu10:8671) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.565Z cpu10:8202) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 08:09.694Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.838Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:09.980Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.123Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.265Z cpu10:8778) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.409Z cpu10:8778) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.551Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.551Z cpu10:8202) WARNING: NMP: nmp_DeviceRequestFastDeviceProbe:237:NMP State of 'naa.600144f0f9e18d0000005160917e0001' of the device in case of doubt; asked the State of the fast path update...

  (2013 06-26 T 13: 08:10.673Z cpu8:8776) iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x410022110b10 network netsched.pools.persist.iscsi associated pool resource

  (2013 06-26 T 13: 08:10.673Z cpu8:8776) iscsi_vmk: iscsivmk_ConnNetRegister: 0x410022110b10 network Tracker id 1 tracker.iSCSI.192.168.70.10 associated with socket

  (2013 06-26 T 13: 08:10.694Z cpu10:8778) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.838Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:10.979Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:11.123Z cpu10:8202) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' the path 'vmhba38:C0:T0:L0' Failed: H:0 x 2 D:0 x 0 P:0 x 0 Possible sense data: 0 x 6 0 29 x 0 x 0. Law: EVAL

  (2013 06-26 T 13: 08:11.178Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: vmhba38:CH:0 T: 0 CN:0: iSCSI connection is marked as "ONLINE."

  (2013 06-26 T 13: 08:11.178Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: Sess [ISID: 00023 000002 d TARGET: iqn.2012 - 11.com.rhineaux:nex70 TPGT: TSIH 2: 0]

  (2013 06-26 T 13: 08:11.178Z cpu8:8776) WARNING: iscsi_vmk: iscsivmk_StartConnection: Conn [CID: 192.168.70.50:59905 r L: 0: 192.168.70.10:3260]

  (2013 06-26 T 13: 08:11.191Z cpu12:8204) NMP: nmp_ThrottleLogForDevice:2319: Cmd 0 x 88 (0x4124003a4680, 0) dev 'naa.600144f0f9e18d0000005160917e0001' on the way 'vmhba38:C0:T0:L0' failed: H:0 x 0 D:0 x 2 P:0 x 0 valid sense data: 0 x 6 0 29 x 0 x 0. Bill: NO

  (2013 06-26 T 13: 08:11.191Z cpu12:8204) ScsiDeviceIO: 2303: Cmd (0x4124003a4680) 0 x 88, CmdSN 0xabe of the world 0-dev 'naa.600144f0f9e18d0000005160917e0001' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 6 0 29 x 0 x 0.

  (2013 06-26 T 13: 08:11.191Z cpu12:8204) ScsiCore: 1483: power - on delivery took place the naa.600144f0f9e18d0000005160917e0001

  volumes/vmfs / #.

  Finally I thought of her. The switches have been on a MTU of 9000. I ran each port to the max 9216 and everything works perfectly. A little shocked by him but I'm just glad it is resolved.

• Displacement of the VM attached to several data stores

  ESX 5.1.  I'm moving from one SAN to another.  I have a Windows VM file server that is attached to the "OS" data store which is 100 GB (for the OS, program installation, etc.) and the data store 'Data' that is 500 GB (where the file real stock data is stored).  On the new San, I created new warehouses of data, "New_OS" and "See you."

  What is the best way to move my data to the new data warehouses?  I know that I can use storage VMotion to move the virtual computer, but who will attempt to move the 'BONES' and 'Data' to 'New_OS' correct?  (Which of course will not work, since there is not enough space.)  I think that I have to remove 'Data' of the existing virtual computer, move it to 'See you' via a browser data store, move the computer virtual using VMotion, then add "you see?"  This sounds more complicated than it should be.  Am I missing something here?

  Thank you.

  Am I missing something here?

  Yes, it lacks the 'Advanced' option in Storage vMotion which will allow that move you each hard to a data store different... to do this, just follow the screens of Storage vMotion and select the data store, click on advanced and for each virtual hard disk and virtual machine configuration file, select the data store you want.

  Take a look at the documentation: http://pubs.vmware.com/vsphere-51/index.jsp#com.vmware.vsphere.vcenterhost.doc/GUID-A15EE2F6-AAF5-40DC-98B7-0DF72E166888.html

  Store the configuration of virtual machines and disks files in different places.

  one Click Advanced. b For the virtual machine for each virtual disk configuration file, select Browse and select a data store or cluster storage DRS. c (Optional) If you selected a cluster DRS for storage and do not use Storage DRS to this virtual machine, select Disable DRS storage for this virtual machine and select a store of data within the storage DRS cluster. d Click Next.

• Storage DRS, move a virtual machine that is in the data store is not a member of DTS

  Dear all,

  If I've set up storage DRS that contains, for example, DS1 and DS2. I have another virtual machine that resides on DS that is not part of the cluster of DTS. Can I move this virtual machine to one of the (DS1, DS2) data store? OR will some disruptions?

  Thank you

  Jocelyn,

  Which is correct in both cases. You can leave DTS place it for you (which is my suggestion), but I thought you wanted it to go to a specific data store.  That being said you can reactivate the DTS for a virtual machine under the SDR change settings if you do not ever clear for a virtual machine

• updates to iOS app show filled in the App Store but not apps actually updates

  There's something strange happening very recently with the app on my iPhone and iPad updates. Two of them are on the latest version of iOS (9.3.2). Apps would show that they are updated in the App Store, but they are actually not updated. This is the second time that this has happened and I am writing this message I try to solve problems. The first time it happened I had to remove the app and reinstall it. I'm going...

  1. I opened the App Store.
  2. Press update of all.
  3. I saw the download of updates and the finish.
  4. Open the button is appeared next to the application in the list of updates.

  The problem:

  1. Applications will not open by typing open the button next to them.
  2. I went to the home screen and the applications in question are darker color.
  3. I typed on these applications and they changed the "Loading"... "which means that they have not actually completed the setting to.
  4. The apps started to download it again.
  5. Applications is is stuck in download.
  6. I turned both devices power off, then turn it back on.
  7. On my iPad: apps started to redownload and completed. Applications are now open.
  8. On my iPhone: applications made "Waiting."... "then"Loading"... "and have not finished downloading.

  I'll post this and continue to wait for applications to download. I don't want to remove them and reinstall because they are multiple applications I would you connect again and synchronizes again that I find annoying. I'll try to update this post after the completed download apps, if they end up actually or if I'll end up resettlement.

  I posted this at 09:00. It is now 16:45, and only one of the applications is completely downloaded. It is not a problem with the internet, because I can stream movies very well. Another application that has been "updated" this morning went dark. I typed it and it has been "Waiting."... "for 10 minutes now.

• How offer you a Mac application that is in the App Store, but not in iTunes?

  I found a Mac application, I want to buy a gift that is only sold on the App Store. Help Apple says we can do through the iTunes Store, but the only version for iOS, not for the Mac. I don't see anyway to gift an app on the App Store, and so for this Mac application, No. way to gift there.

  Any ideas?

  Yes, it has no function of gift in the Mac App Store. You can use the iTunes app to buy a gift certificate e-mail for an amount close to the price of the app. Or you can buy and send an iTunes Gift Card available in many stores the.

  By the end of 2012 mini Mac, OS X El Capitan 10.11.2; Apple Watch, 38 mm silver AL, Watch OS 2.1; iPad 2 & iPhone 6 + iOS 9.2 air

• Data store is not mounted automatically after updating the Firmware of the LSI

  I've recently updated the card RAID LSI firmware on my ESXi 5.5 system (patched and update top of page)

  When I rebooted, took place the following:

  1. the associated VMFS volume RAID was mounted

  2. the data on the volume store was not mounted

  I mounted the data store manually and restarted my VMs

  Do I have to re-signing the Volume and/or the data store to raise it properly.

  Steve

  The command should be ok and do the same thing as the command esxcli esxcli storage vmfs snapshot mount -l label|-u uuid (for details, see http://kb.vmware.com/kb/1011387).

  André