The sounds randomly going deaf

Similar Questions

• Distortion of the sound randomly on the dv7 - 4073ca.

  Not sure what is the problem but every few minutes, I get this thing weird sound distortion, where I'm sure that the same sound loops quickly for a second or two. It is very random and it occurs at any time; When I listen to music, watch a video of youtube, play a video game, etc.. It happens one second at a time and I can't confirm this, but I think the videos that I look at the time/music I listen to on the shelves in time for the amount of time (or less) of sound distortion.

  Thanks if anyone can help out me.

  EDIT: If it helps, I've heard that several devices (speakers or headphones)

  It is a firmware issue, and you must update the BIOS on your computer. This problem has been fixed in one of the most recent firmware (vF.23) available for this model here.

  Also, audio drivers updated for your laptop that can be downloaded from here

• HP Pavilion x 360-P1F10UA #ABA: short Popping noise through headphones before playing them all the sounds (brand new HP 13-s128nr with Realtek)

  Hello

  I hear a sound of pop via helmet whenever I play music or even he plays Windows system sounds.

  The noise is short, it is as if once you plug in your headphones.

  I believe that it has something to do with power management, because it seems that the sound system goes offline when nothing is done and once it turns to play something it makes noise.

  I found similar questions that people have had to face, but none of the worked for me.

  For example:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio/HP-Pavilion-G6-2240sq-strange-sound-speaker...

  and

  http://Rog.ASUS.com/Forum/archive/index.php/t-35046.html?s=927083fd01c9f0ec873b7e9e8da8d47e.

  I did the online conversations with HP Media, but they were not able to find a solution. What they were doing was to uninstall/reinstall the drivers who did not work for me.

  In my view, that it is a software problem.

  I didn't expect that from HP, but I feel a little disappointed in my choice. I hope I can fix and not return.

  I would be grateful any suggesion.

  Thank you

  Bijan

  Hi, I have been looking for a solution to this problem and found that not using the Realtek HD Audio Manager/B & O stop audio popping. The problem with this driver is that it makes the card its close after 10-20 seconds of no audio output in order to save battery power and to our advantage, there is no way to disable this "feature". What you mean, its break-up, is similar to the helmet being handed over to since the restart of the sound card. I see that the audio is not as great after this fix. To do a choice so audio sacraficing a little quality to not burst or better audio quality and popping. I found these steps of the forums hp here, thanks to SteveCT99.

  1. Go to the Windows Device Manager > sound, video and game controllers section.
  2. In the list of the audio device drivers, look for Realtek High Definition Audio.
  3. Right-click and select disable. Down arrow on this driver, indicating it is disabled. (NOTE: at this point, you will not be able to play music files.)
  4. Right click and select Update driver software.
  5. Select Browse my computer for driver software.
  6. Select Let me pick from a list of drivers for devices on my computer.
  7. You should see a window that says Select the driver to install for this hardware device. NOTE: If you see a window that says something like This is the best driver for this device, close the window and repeat steps 4, 5 and 6.
  8. In the scheme box, select Audio device high definition (this is the device driver audio substitute) and click Next.
  9. In the Update driver warning window, click Yes. You should see a confirmation with thehigh definition Audio Device display window. Click on Close.
  10. In the list of drivers of audio device in the section audio, video and game controllers, you will notice that the high definition Audio device now displays instead ofHigh Definition Audio Realtek.
  11. When prompted to restart, click Yes

  I hope this helps!

• I have a problem with the sounds playing on their own despite the sounds stopped.

  Original title: don't stop sounds

  On my WIndows 7 machine when sounds play everything that they don't stop. The last piece of the sound keeps going. It does not drag the last piece, but the last tone just keeps going. I tried different speakers. Any ideas?

  Thank you!

  Hi, John.

  Your answer made me restart the system, I always advise my clients to do, but had not done myself! Naturally, this seems to have solved the problem.
  The answers to your questions are:
  1. all sounds
  2, system sounds and sounds of programs
  3. I did not try it.
  4. Yes.
  5. well, he stopped at Windows startup (re)!
  Thank you!

• Stop the sound on mouseout/mouseouthandler() - how/where add code

  I read through several threads, but I can't figure out how or where to add the code for the sound to stop on mouseout/mouseouthandler(). I read the messages that buzz.js might be able to help, but I need advice to apply it.

  The project is included in the download. The US Landmarks each have an animation that starts a stopover on mouseover and mouseout/mouseouthandler(). I need the sound that goes with each animation to do the same.

  Firefox handles its OK at first but then seems to get glichy. Chrome keeps all the loop sounds whenever I mouseover.

  https://www.dropbox.com/s/x2iih9sgqff316i/SummerTips_052114_0430.zip  I apologize for the large file. I am looking for an alternative to a single sound file that is larger than 6 MB.

  It is my first project in environmental assessment. I learned EA as I build it (conversion of project Flash that someone else did a few years ago). I'm sure that there are more effective ways to do a lot of what I have here, but it works in the way he needs, except for the sound.

  I am open to any suggestion. Thanks in advance for the help.

  Lynn

  Hello

  There are some errors in your code above:

  In the mouseenter event:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ("enter");

  There's no label "enter" for the audio element. It should be:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ();

  The biggest problem is in the mouseleave event:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .stop ("exit");

  The audio element is not a stop method. You must use the break and with no label in there, like this:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] () .pause;

  HTH,

  Joe

• Imported while first without the sound? Strange update or fault?

  I missed something 'new '. Today I learned that no matter what I do - if I export a sequence in the timeline and imported it into the project it does matter as the film, but without any noise. With some codec I can play the clip as it should be in the windows 7 ultimate explore but sometimes I also automatically get a HD file and audio files like wav as a separte thing. I never had this before. In fact, what I want to do is to create a sequence of my calendar and have as a separat HD-file to be used as much as in the project. Especially if the sound is not the original one but he added by myself. I've done it before and I just get my HD file and he could play in preview WITH sound. Now all I get is the photo, but... as I said: without noise. This is not normal. So, who is a rather useless update or a failure in the program?

  And how can I copy a sequence in a timeline and place anywhere on the timeline. Used to be so easy in a previous version of first. Now copy and paste doesn't work any more. And whenever I want to add a clip on a layer, I have to close all layers used, because otherwise the sound is going anywhere, but where it should and could be placed just within another sound layer.

  Used to be all much better and simpler in past editions.

  So, who is a rather useless update or a failure in the program?

  It's very probably operator error.

  Several images and sounds separately export formats.  This is normal and due to these formats, such as DVD and Blu - ray.

  Be sure to know what you are doing with exports and choose appropriately.

  You can copy the clips with the CTL + C standard 'copy' command and paste anywhere else in any sequence with the CTL + V standard "Paste" command.  (Be sure to set track targeting first).

• Why my iTunes library sound randomly cut during the use of my new macbook pro and the old Bose speakers?

  Why my iTunes library sound randomly cut during playback on my new Macbook Pro and the old Bose speakers?

  The speakers connect through a USB port, instead of by means of the mini plug stereo audio output (headphone)?

  If it uses the standard audio out Jack, try to plug ordinary headphones instead.  The problem goes away or still occur?

• L70-A-K5S - Sound satellite goes only to the helmet

  Just Bough Satellite L70-A-K5S.
  Sound is only going through a headset. When plugged headphones, his (music, Skype) can be heard through speakers for a few seconds, then silence.
  I checked all the options - mute, levels, effects. Everything looks ok. I have updated driver for conexant.
  Did not help.

  Music/voice plays for a few seconds then stops (so that meters in the mixer shows it goes again).

  Hello

  and the sound is still visible using the headset?
  Well, for me it looks like a malfunction of speaker since returning to factory settings should solve all possible software problems. So I think that its hardware problem.

  However, I recommend to check some display settings.
  First go to Panel of-> sound-> the Read tab
  Here, you must make sure that the speakers are marked as the default device.

  It would also be interesting to remove the following devices in Device Manager:
  -in audio, video, game controller uninstall Conexant audio driver
  -devices to remove the High Definition Audio Controller

  Finally, reboot and retest the sound.

• Toshiba satellite C655-S5128 and the sound goes in and out

  I have a toshiba satellite C655-S5128 and the sound goes in and out, I have to click the button on the lower right side speaker so that he works for a very short minutes the out again once and I have to repeat this if I want sound, iv tried all the troubleshoting there can anyone help?

  
  
  
  
  Please write me help * address email is removed from the privacy *.
  
  
  Thank you, Laurie

  Hi jthoodrat,

  Run the difficulty in this document to resolve common sound problems in Windows.

  Let us know if that helps.

• I'll randomly hear the sound "budunk" as I am connect or disconnect a device, and the screen turns off for a second. Why is this happening?

  I am running Vista Home Premium 32 bit and I use my LCD TV as a monitor, connected via RGB connection.

  If I happen to watch a video in full screen, it will kick of the full screen mode and sometimes, but not always, a window will open on Microsoft Silverlight.  I've updated to the latest version of Silverlight yesterday, and now when I go full screen, audio and video do not always match.

  In fact, the problem has been resolved.  The problem was that I had chose the tv as my monitor, but that he had unconsciously chosen to extend the desktop on the monitor to the laptop, so that the two pilots of the monitor were not cooperating for some reason any.  When I chose to just disable the monitor laptop in settings, since I was not using it at all, the problem is completely resolved itself, and now there is only an entry for a monitor in Device Manager.  The sound was done when I opened up the laptop monitor tried to kick, as if I'd opened the cover, which I think has not been closed firmly, so he thinks randomly there.

• How can I stop randomly ding-* the sounds coming from my computer?

  Help! Every two hours, I get a random ringing * sound of my desktop computer, if there is a web page open or not. The sound comes from speakers but is not related to the speakers themselves. The sound is the "notify" windows wave sound, like a "ding *.»  It happens totally randomly, without warning and without apparent reason. Can someone help me remove it? I use Windows 7. Thank you!

  Look in the event viewer for event occurring at that time there

• My iPhone screen 6 is black but the phone still works as the sound goes in and out. I can't restart and have tried several times and cannot reset on iTunes because need to unlock my phone.

  I dropped my phone in a short distance and when I picked it up it the screen was black. However, the sound still works as I changed the switch works for her and he made noises. I also slightly see the apple logo when I turn on my phone and you can see the switch when I try to turn it off, but it is not entirely displayed, I can't see it in very dark rooms. I tried to reset the phone several times using the Lock and Home buttons at the same time and we have tried to connect it to iTunes to reset, but it does not connect due to having unlock my phone, I can not do. Any help would be appreciated.

  Hello CaffNutt,

  Thank you for using communities of Apple Support.

  I see that you get a black on your iPhone screen, even if it is enabled. I would recommend that you take a look at the following article:

  Get help with the screen on your iPhone, iPad or iPod touch

  The first two sections seem more relevant.

  Best regards.

• The program monitor randomly goes black

  First Pro CC uses for months and no problem.  All of a sudden, the program monitor goes black, then back over video transitions between clips, then goes black again.

  I have a HP workstation, with a processor of xenon 12-core, 32 GB RAM, 9 TB of disk storage hard (the first 1 TB flash), blazing fast dedicated with a ton of video memory video card.  It's worked wonders for 12 months and with all the other products Adobe (Photoshop, Lightroom) and hundreds of other programs.  I have NOT changed any video card or video processing settings.   I don't have a hardware problem - it is a problem with Adobe first Pro CC.

  I spent the maximum money on the hardware and the software more later/better (even though I hate paying a subscription for software).  And now this...   Moreover, I understand now and still not a bug, but when the screen goes black in a video software - well, it's like losing your direction while on the highway - it's sort of IMPORTANT - wouldn't you say Adobe?

  I'll scream at Adobe on Monday, but have a serious work that must be done this weekend.

  Is there any help that works?

  You use the latest versions (which numbers?) of Adobe CC?

  Try resetting the workspace.

  Try to update or restore your video driver.

  Try to remove the media cache files.

  Try resetting preferences.

• Change the sounds in Sierra?

  Hello good people who hopefully know more than me on these things:

  In operating system, we could change the sounds of trash going to Finder & to find your way to coreaudio, etc., but now it seems that one cannot add or remove sounds in or out of this folder.

  I do something wrong or Apple has indeed taken something away from us once again (for example, the ablity to customize certain sounds)?

  Please if anyone has figured this out in the new system, help a brother.

  Also would like to change the sounds iMesage & error as well on the Sierra, if you know the trick!

  Thank you very much!

  So I solved my problem by simply reminding you must clear the SIP first, then you can access and modify all that many good things to the desire of the heart of yer.

  Woo - hoo!

• The sound system preference and Callnote

  I installed Callnote to record Skype sessions, but I found that it was interfering with the audio system so I uninstalled using AppCleaner. However, I have always had a rest of Callnote in the input and output peripheral windows from the Sound System Preferences: How can I get rid of him?

  Also (in the spirit of BOGOF - buy one get one free), it's annoying that my startup to open Safari, it starts but does not show a window - I always click on the Safari icon in the Dock. This started to happen with Yosemite, I think; until a window appears automatically. I presume that it does not show because "Hide Safari" is an inalterable permanent choice in the Safari drop-down menu, but why is this so when no other application has this selected permanently?

  Don't know about the first part, but for Safari, try going to system preferences/general and uncheck the narrow windows when you exit an application.