The system on new hardware to restore image
I posted my question down in response to an old thread. I don't got no answer so I create a new thread to see if I get a response.
EFF Berg answered the
. Here's my situation. I have a very old laptop (7 years). at this point in time, I did a
full backup. When my car has a 'material' breakdown, I'll buy a newer pc, probably
with windows 8. I now have windows 7. I will not require a backup "image" as if I just wanted to
add my existing programs, etc. on my new pc, photos. I will not of course an "image."
backup I'll use another operating system. the 'image' backup is only good for your
existing PC;.
I hope I helped. It's confusing. even many of the so-called 'experts' could not explain
Why one on another, or why, perhaps, you only need a backup 'complete' and not a 'image '.
backup copy.
Kind regards
Rob
OK, what happens if my or your computer laptop "kick the bucket" & you buy a new laptop or desktop, but you prefer to run the old system with the previous versions of the software that you have already paid for without going through the cost & time to the upgrade of each simple software package already in use. You can restore the 'image' on the new computer?
I learned that WINDOWS license will somehow recognize the "new" hardware & does not allow the old image of system work. Is this true? This is a particular topic of interest to me because I have a system dual boot XP/WIN 7 & I'm fretting about the possibility of the failure of computer hardware & need to replace the computer itself can no longer have the ability to dual-boot.
You have always advised not if the license was OEM or retail.
If you transfer the license to a new machine do you a clean install, it is legal to do so.
Dual-boot system was originally XP & a DELL machine so I guess the OEM, but not sure because there is no OEM partition. I do not know the laptop that I experimented with is an OEM, because there is an OEM partition. If the PARAGON software circumvented OEM licenses?
I should add that the restoration of the laptop went to a DELL to a DELL, but they do not have the same model. First of all, I did the restore process & had to do a repair install so he can start, but there was a bunch of quirks with the system which actually behave enigmatically. However, when I used PARAGON I was able to start successfully on the 1st attempt & by all accounts seems to work well.
I covered amenities already and you cannot transfer to different Dell Dell and afterwards you will receive a message that it is not genuine
There are rules about whether if you can transfer licenses Windows.
If the computer/laptop comes with the preinstalled Windows operating system (Dell, HP, Acer, etc.) or is licensed to OEM System Builders, that the product key that came with the computer/laptop is preinstalled OEM license and is not transferable.
OEM license/product key (systems of operating pre-installed on Dell, HP, etc.) and the license OEM System Builders are related to the first machine it is installed on and dies when machine who dies.
Tags: Windows
Similar Questions
-
Separated from this thread.
My ACER Aspire 3100 died. I restored this Dell Optiplex 745 and want to run my old Windows7 Home Premium to my ACER on my current machine. Is it possible to transfer the license to new hardware? Here's the diagnosis:
Product key of Windows7 Home Premium for AcerAspire3100Windows 7 Home Premium migrated to Dell computer
Diagnostic report (1.9.0019.0):
-----------------------------------------
Given WGA-->
Validation status: invalid license
Validation code: 50Code of Validation caching: 0x0
Windows product key: *-* - 74XYM - BH4JX-XM76F
The Windows Product Key hash: KeYfcvXg/a1Q01x73 + f8IL/JC4Y =
Windows product ID: 00359-112-0000007-85999
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {3E137034-9496-4E30-B0A9-557B440CD2E3} (3)
Admin: Yes
TestCab: 0x0
WGA Version: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.140303 - 2144
TTS error:
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Enterprise 2007 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{3E137034-9496-4E30-B0A9-557B440CD2E3} 1.9.0019.0 6.1.7601.2.00010300.1.0.003 x 32 *-*-*-*-XM76F 00359-112-0000007-85999 5 S-1-5-21-144871190-1108465423-1748584281 Dell Inc. OptiPlex 745 Dell Inc. 2.3.1 FA803607018400FA 0409 0409 Mountain Standard Time(GMT-07:00) 0 3 DELL B8K 100 100 Microsoft Office Enterprise 2007 12 Y9u6AV6ROLix7muKCr67SHEI3 + 4 = 81599-872-5374781-65113 1 15FA07F43EF9ED0 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00170-112-000000-00-1033-7600.0000-1292014
Installation ID: 016760155910838136584500866031194393756542210431530004
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: XM76F
License status: Notification
Reason for the notification: 0xC004F009 (grace period expired).
Remaining Windows rearm count: 4
Trust time: 01/09/2014-21:49:48Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C532
Beyond: PASS
Event timestamp: 9:1:2014 21:48
WAT Activex: registered
WAT administration service: registered--> HWID data
Current HWID hash: MAAAAAEAAwABAAEAAAACAAAAAQABAAEA6GFW3JyFTmu2hi73wOvS6a5dQj32JyqFActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL APIC B8K
FACP DELL B8K
HPET DELL B8K
STARTING DELL B8K
MCFG DELL B8K
SSDT DELL st_ex
ASF! REFERENCE DELL B8K
TCPA DELL B8K
B8K DELL SLICIf the Windows 7 Home Premium pre-installed with Acer, the answer is no, you cannot transfer it.
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GBLicensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspxIf it is a license purchased in retail store, the answer is Yes, you can transfer, but you may need to reactivate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Recovery XP system with new hardware
Hello. I have problems with a virus on my HP Media Center m1070n and I think to do a system recovery to get rid of him. It has been really stubborn and nothing I've tried has been able to kill him. I would go ahead and do the system recovery, but after reading the instructions on the HP site, it is said to remove any new hardware that did not come into the PC. The only new material I have is a new video card and more RAM (the old RAM is still there, I just added 2 more sticks). I could get out of the RAM, but the video card is another story. I don't have the original map (it was flat when the computer has a problem of overheating a few years ago).
Is that going to cause a problem if I do a system restore? Do I have other options?
Thanks for your help.
There is no car for this motherboard video. The video card will work fine. When you are recovering make sure you select this option to perform a DESTRUCTIVE RESTORE or the virus will remain.
The D: partition is still intact?
"The only reason for time is so that everything does not happen at the same time"
-Albert Einstein -
Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive
Hello world
I need help here.
My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).
I am preparing a second HDD (NEW 320) as backup.
I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.
After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.
I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.
Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.
What can go wrong here in this case? Thank you very much for the help.
Concerning
John
OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.
If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.
Model No.: m7-j010dx
Product #: E0K83UA #ABA
Ships OS: Windows 8 (64-bit)
Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)
User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.
With the help of UCRDs sent media recovery media (SSRDs):
When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media. Consider this a snapshot of the current HW, the base drivers and software applications. If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.
A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work. I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented. I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered. The PC recovered and when the new Blu - ray showed I installed the unit and guess what? All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC. Applications were there but no Blu - ray capability.
Huh? It looks that I did not put any time at all.
I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.
After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.
The difference between UCRDs and SSRDs:
UCRDs provide a glimpse of what is installed and functional both disks are created.
Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):
SSRDs have all the drivers for all the HW and SW qualified for the unit. There may be several drivers for hard drives, different types/screen resolutions, sides, etc. Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't. After entering the recovery SDRD, the Notebook media boots to Recovery Manager. The first step is a raw copy of all the contents of the disc on a temporary partition. Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device. Drivers and the only successful applications are the features supported. And then, the new operating system and recovery partition is created. The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.
So, that being said, what could be the cause/solution?
Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.
The SSRDs are supported on the new HARD drive installed?
I don't know, I have an office boy, and I have not tried on this model of laptop.
If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works. It may or may not. I don't know what drives were qualified for this laptop.
If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.) I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit. He has worked on both units.
Conclusion:
I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation. I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.
But then again, I know.
I am an employee of HP...
-
How can I get rid of the screen of "Found New Hardware Wizzard: device modem on high definition audio bus" that kept appearing on my screen each time after I log on my computer? Thank you.
If uninstall you it, it will all come immediately the next time you reboot and start bugging again.
-
Re: Questino on the system Windows Vista drivers and restore
Configuration: vista sp1-norton internet security2007 Vista premium edition.
Yesterday I tried to update my drivers realtek as recommended by Toshiba notificaions.
Using Add and remove, he stated that there was a problem, but then on board, but they seem to be always installed, I checked etc Device Manager and I still have sound.
But there is now no record in Add or remove any listing of the realtek driver high definition.
For this I tried to use system sort restoration he goes through the motions, but he said then was unable to complete because of an error?
I disabled norton in the commissioning and config system etc, but this still does not work I even disabled everyting in the start, but it still does not.I'm happy to let the driver as they were, but I'm worried not being do not add delete my main concern is that system restore does not work thanks for any help.
Garbí
Hi Mick
You ad is a bit confusing to me
You ve removed the Realtek driver, but you cannot install a new. Am I wrong?
First of all, you must clean your registry using CCLeaner free software.
Then go to Device Manager and remove the sound card system devices and PCI devices high definition.
Reboot the laptop.
After the initialization of the short Vista should find a new device (sound card) and ask the driver installation.I think this should help because it has helped me too...
Good bye
-
In despair because of the constant failure of Windows updates, I resolved to follow the suggestion of Microsoft with an 'install-> Upgrade' from my original installation disk.
After a short so that I get a message that it is not possible because my version is newer than the one on the CD.
Issues related to the:
- Why Microsoft finally proposes an update (patch) procedure that works correctly?
- Why Microsoft suggests a repair procedure (the upgrade of the installation disk) that does not work?
- Is there a way to force the upgrade procedure to do its job properly?
- Win 10 will have the same function of shit update?
I am running MS Windows 7 pro/64 SP1
Thanks for any helpful info
Ed
Hello
It would seem that your original DVD came without Service Pack 1.
Over time, you installed SP1 that makes the operating system newer than the one on the DVD.
Uninstall SP1 > do the installation of upgrade repair > reinstall SP1.
See you soon.
-
original title: Windows activation problem.
I have windows vista 64-bit. I installed 2 or 3 years ago and wanted to reformat because I bought a few new parts. So I reformatted and reinstalled windows, but it's now, it tells me that my key is invalid for activation. Is my drive that I bought and it worked before, why now it does not work after reformatting?
How to activate Windows 7 or Vista manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not select/press options) and wait for a person to help you with the activation.
(6) clearly explain your problem to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.---------------------------- Alternatives -------------------------------------
Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxJ W Stuart: http://www.pagestart.com
-
on windows xp that my system restore to a previous restore point, I tried many restore points & created new ones but the system displays "could not be restored", any help out there.
Let see... What do we know about your system environment:
It's windows xp.
If we knew more, you would probably now.
What is the problem that you are experiencing this thing you System Restore will be remedied? System Restore is not a time machine.
The system restore already worked successfully in the past?
Thank you MS Answers, allowing the resolution of simple problems like frustrating and a lot of time as possible by asking only not for any information system when a new question is asked.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a working CD/DVD (internal or external) drive?
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
If the system works, what do you think might have changed since the last time it did not work properly?
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).Give these ideas some consideration if they apply to you.Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.No matter what you use for protection against malware, I do so and then only begin to solve any problems:Download, install, update and do a full scan with these free malware detection programs can solve any problems:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.The scans by operating clean, reboot, test and we can fix any other issues. -
Could not start the system image restore
I am running Windows 7 Enterprise 64-bit.
I want to try to create "system image" and then restore it. Where will it work for me I will use all my 20 PC.
My PC has a C: drive
I partitioned it and now I have C: and D: with an abundance of free space on each.
What I did:
1 created 'image system' and it stored on D: Finally I use the external drive for backups (currently I don't have it and I just want to test that I could save/restore)
2 created "Repair disk", then it I created a bootable USB key, because some of my PC doesn't have a CD ROM
3. start the machine from USB and select "Restore from system image". He acknowledged that the image is on D: but immediately restore failed with this message:
"Cannot restore the system selected in this recovery environment image."
Navigation on various forums, it seems that this message comes because of 32 bit and 64 bit OS repair disc.
Where my 2 questions:
1. maybe my question related to the fact that I'm not restoring external hard drive but another partition?
2. in case I have a problem with 32 bit vs 64 bit... and how it could happened? I used Win 7 Enterprise to create this disc, but I don't know if it defaults to 32-bit or 64-bit or he even gave me the opportunity to choose amongst...
Any suggestions?
Thank you
Windows 7 Enterprise is only available to corporate customers, so you should address your question to your IT Department. The proper forum for business clients is MSDN. No indication they provide is likely to result in the range commonly used business tools - network-wide.
-
Original title: System Restore problems
Hello, I am running Windows 7 Home Premium 64-bit classic mode. My system specs are listed under my signature.
Before installing a program today, I went to create a system restore point. In system properties > System Protection, I see that in the Protection settings > disks available there are two instances of the C: drive tagged like this:
HDD0 (C :) (System) Protection on (selected)
HDD0 (C :) (Missing) Protection onThis is probably due to having recently replaced my C: drive with a disk larger to help to restore from a System Image backup. The installation seems to succeed. (I use now!)
Note: other readers in Protection settings are showing off Protection.
When I clicked on "Set up" in system properties > System Protection, I have seen that in the restoration of settings, the box "Turn off active Protection" has been selected. I put the option button "restore system settings and previous versions of files. In space, the slider was set to 0. I put it to 1% (857,54 MB).
When I tried to leave the system of Protection for the dialog to HDD0 (c) I got this error:
There was an unexpected error in the property page:
The file name, directory name or volume label syntax is incorrect. (0x8007007B)
Close the property page and try again.I deleted all restore points, then created a new restore point. Current usage shows now 29,48 MB. I still get the error when I try to the OK from the dialog box. When I click on the system restore and start the Restore Wizard that I can see the restore point, I just created.
Any help to banish the fake player available and messages will be appreciated greatly.
-Dave
ASUS P7P55 Deluxe
PC power & cooling silent 750
Corsair CMX8GX3M4A1600C9 (x 2 4 GB DIMMS)
ZT-98GES3M-FSL ZOTAC GeForce 9800 GT 512 MB GDDR3 256-bit PCI Express 2.0 x 16
Drive0 (OS) SSD OCZ Agility 2 OCZSSD2-2AGTE90G 2.5 "90 GB SATA II
Reader1 (data) HITACHI UltraStar A7K2000 2 TB 7200 RPM 0F10452 / MIN 32 MB of Cache SATA 3.0 GB/s
Lecteur2 (Apps, pagefile, Misc) SSD OCZ Vertex 2 OCZSSD2-2VTX50G 50 GB
Drive3 (Web data, configuration files Pgm) OCZ SSD Vertex 2 OCZSSD2-2VTX50G 50 GBHey DaveMcKeen,The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
Set the path to the appropriate Windows 7 restore point.
To remove this error message, follow the following solution:Step 1:To set the path of the appropriate Windows 7, restore point as follows:a. Click Start.
The Start Menu appears.
b. type sysdm.cpl in the start search box and press.
The user account control window will prompt you for permission to run the program.
c. click on continue.
The System Properties window appears.
d. click on the System Protection tab.
e. under automatic restore points, uncheck all invalid location or duplicate
f. Click to check drive C: with the Windows Logo
g. click on apply, and then click OkStep 2:
Create a system manually restore point:a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
b. in the left pane, click System Protection, if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. click on the System Protection tab and then click on create.
d. in the System Protection dialog box, type a description, and then click on create.
Reference:create a System Restore Point:
http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-pointSystem Restore: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questionsThank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Error 15 with COLD LAKE in nisyscfg.lvlib:Set the System Image
Recently updated the code that worked for imaging cRIOs in LV and LV 2012 2011 should be replaced by the new and improved nisyscfg.lvlib screw: define a System Image, get a System Image, etc,...
I get the following error message when my installed executable tries to imagine a cRIO: ' 15 error occurred at the library function node call in nisyscfg.lvlib: Set the system (folder) .vi:1-> nisyscfg.lvlib Image: System to define Image (file) .vi:1-> GetSetSystemImage.vi'. Displays the possible reason: ' LabVIEW: resource not found. "
What products/installation packages are required for the system of screw configuration? I'm including NISysCfg_Runtime and NISysAPI_Framework.
Thanks for your time.
Problem solved! Correct installation packages are: NISysAPI_Framework, NISysCfg_Runtime, mDNS_Responder, NI_Curl, NI_SSL_Support, NI_TraceEngine, NI_RPC and the mxRmCfg.dll.
-
I have a Western Digital external backup drive. I get the wizard Found new hardware message whenever I start the system. The salesman says this means that the operating system does not have drivers for my device on the record, they made a correct installation of the devices, but it does not keep the computer, they suggest that there could be a problem with the operating system. Can you help me?
Good to hear it worked for you... Please mark this answer to the debate...
-
where did bookmark.htm located after the system backup and restore?
My drive hard was not so much the system windows vista backup and restore function told me to back up what I did on an external hard drive. Reference Dell comes to replace the hard drive, so now I want to recover my old internet favorite Solution Explorer (no, I never exported bookmarks to an html file - stupid, I know). were the bookmarks or somwhere bookmark.htm file on my external hard drive and can I somehow get back them?
Favorites are stored in files URL - a favorite in a file. Search for yourhard drive for them. Type in a command prompt (type in search of start commandMake the box then right click and choose Run as administrator)dir c:\*.url/a/s--..--"surfdude67" wrote in message news: bf66c6b5-714 b-40ae-93fb-0210bcedd95b...> my hard drive wasn't so much the windows vista backup and restore system> service told me to back up what I did for an external hard> by car. Reference Dell comes to replace the hard drive, so now I want to recover my> old favorites to the internet Explorer (no, I never exported bookmarks to a(> html file - stupid, I know). were the bookmarks or the bookmark.htm file> saved somwhere on my external hard drive and can I somehow get back them? -
After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Why can I receive my bank details on a Web site on Internet Explorer, but not FireFox
I can access my bb & t bank account on Internet Explorer but when I try to enter the site even on FireFox the following message is displayed: Service not available The server is temporarily unable to process your request. Explanation The server is un
-
the number of CT of my HP laptop battery can provide the serial number. my laptop lost
I was lost my Hp laptop, and I don't have the serial no, now I found the battery that came with it, this isn't a CT.6301604BBVX3AFThis no's take me to the serial No. to track my laptop?
-
How can I get a tab to open the display of my home page?
How do tabs open in my homepage?
-
All the above say:Before, when I typed an http address in my hotmail account, it could be highlighted; Since I have firefox, it is NOT highlighted. How can I get firefox to highlight an http address when I type it?
-
Wireless connection dropping on the Satellite C660-195
Hello I recently bought a new Toshiba Satellite C660-195.However, I have problems with the wireless connection. When I bought the laptop, it was full of all the annoying and resource hungry programs Toshiba install there. I have reinstalled Windows o