The system restore on Satellite C660

Similar Questions

• Problems of the system restore on Satellite L500

  Recovery disc Toshiba product to retrieve the system on the new hard drive in Toshiba L500 PSLS3A - 04M 002.

  During recovery, Windows has complained of "Windows cannot verify the digital signature for this file" - file is LPCFilter.sys.

  Also when you set the drivers, Windows made the same complaint about the Realtek High Definition Audio driver and a filter driver Virtual WiFi (from Microsoft Corp!).

  After the restoration, if I start Windows normally, the Windows Startup Repair automatically starts with a title "your computer was unable to start. Startup Repair takes a while and then comes up with a message "Startup Repair cannot repair this computer automatically.

  If I press F8 at startup and choose the option "Disable Driver Signature Enforcement", Windows starts without any problem.

  I thought that it might help to an update of Windows, but when I click on the "Check For Updates" button I get a message "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "When I look in the Services, I see that the service is running.

  I don't want to press F8 whenever I start and don't think it's a good idea to do it anyway and would like to be able to update Windows.

  I'd appreciate any help.

  You created this disc on your own or you are using the original disk from toshiba?
  Do you use it for the first time?

• I clicked "forget this site", I can cancel it by running the "System Restore" function to retrieve my story?

  I clicked "forget this site" and I am looking for a way to undo it. I have heard say there is no way to retrieve the history of a particular site, once it has been deleted, but surely, it leaves some kind of record in the system? I read an article that suggested running the "System Restore" feature which gives me the option to "restore my computer to an earlier time" before that some changes have been made. Would this work?

  Hello, windows system restore will not restore the file that contains the history of firefox unfortunately (it's called places.sqlite). you would need a backup of your firefox profile folder to retrieve such data.

  Please also update firefox - the version that you are currently using is outdated and affected by many security vulnerabilities.

  Update to the latest version of Firefox

• Pavilion 2000: Using the system restore

  I used the system restore in the past and I know it took a few hours to complete with good results, as it eliminated the problem. Last week, I used the restoration of the system, the screen turned blue and the restoration began however this continued for more than 3 days!  I was unable to use my laptop for so long. I saw a blue screen with an icon swirling in the Center. Miraculously, the day 4, he came back to life, but immediately began to update the apps I had checked to only not to do. It took an extra day. Actually, now it's back to normal. I am now afraid to use the restoration of the system again. What I've done wrong?

  Hello

  Thanks for posting in the HP Support forum.

  Could you provide your full computer model - information can be seen from the service tag sticker > > http://h30434.www3.hp.com/t5/Miscellaneous-Topics-Read-Only/Advice-for-asking-the-quot-Very-Best-Question-quot/td-p/83280 ?

  Could you confirm your OS - is this Windows 8/8.1 now?

  I see your previous thread in the attempt to upgrade to W10...

  I'm not sure about what you were wrong (if anything), but

  System Restore is a feature of Windows that usually takes minutes (30 minutes max) in full, not hours, not days. It restores the Windows registry, files/settings of the system to a previous state and is generally quick.

  Do you mean the system recovery or system reset/refresh?

  These are different things. These restore original Windows or format partitions on HARD drive - it can take an hour or 2-3 max but not days.

  If these (especially system restore) lasts days, there is indeed something wrong with the operating system.

  Looking forward to your confirmations.

• After the system restore, clock is located one hour before because of DST

  Because of a logon error, I had to perform a system restore.  After the system restore has completed, I noticed that my clock is set ahead one hour (DST).  I think that TimeZones eventually applied twice to the clock.  I can put back an hour, but I rather it would be correct.  I tried to re - download the patch for the DST, but that did not help.

  Have you tried to reset the clock -

  "With the time server Sychronising Internet?

  Have you checked your area etc

  TaurArian [MVP] 2005-2010 - Update Services

• Get failure catastrophic error when running the system restore

  Original title: System Restore

  When I try to use the system restore I get a message syaying that system restore did not complete - this error 0 x 80070057 and he SIAS catastrophic failure

  Anyone knoe what to do to fix?

  Thank you

  Maggie

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070057/0b8c7c81-3fe9-4D43-8369-1a41a5756171

  It will be useful.

• Impossible to access the system restore, getting the error "system restore has been disabled by group policy.

  Recently, I was hit by a virus that, among other problems, he blocked my access to the system restore to clear it. After having had my pc repaired I can not even access the system restore or my registry. I get a message from that system restore has been disabled by group policy. It's my own pc and I am the administrator. I've tried a few things without success. I hope someone can help me with this. I have the vista operating system.

  1. click on start, run and type regedit.exe , and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  • Delete the value DisableConfig
  • Delete the value DisableSR

  3. exit the registry editor.

  Other tips, tricks and support are available at: www.waltwachon.weebly.com

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• How to switch on the system restore? Repeat me domain administrator contact

  I need to turn the system restore, but I get the message administrator contact field

  Hi pietbotha,

  1. is the computer connected to any domain environment?

  2. did you of recent changes on the computer?

  If the computer belongs to any domain environment, then you need to contact the network administrator for assistance.

  Try the steps below if the computer is not connected to any domain environment and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  (a) click Start, run and type regedit.exe, and then press enter

  (b) navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  a. delete the value DisableConfig

  b. delete the value DisableSR

  c. exit the registry editor.

  d. restart.

  In Windows XP Professional, you can accomplish the above by using Group Policy Editor.

  (a) click Start, run and type GPEDIT. MSC

  (b) access this location:

  Computer configuration-> administrative templates-> system-> system restore

  (c) define disable unconfigured system restore

  (d) disable Configuration value not configured

  (e) to exit the Group Policy Editor

  (f) restart.

• Printer continues to stop & requires the system restore?

  We noticed a delay problem where printer stop printing.  What happens with XP and Windows7, but they show different symptoms:

  With XP, the printer also show online.  However, to get anything to print.  It affects all users, is not corrected by updated printer spooler restarts, restart, change USB port, cable changes or printer resets.  No errors in the logs.

  With Windows7, printers go offline or completely disappear and stop the spooler.  You can restart the spooler and printers reappear for a short period, but they disappear in a few seconds.  As noted above, nothing seems to correct the problem.  It's just generic elements in newspapers, but nothing specific.

  The only thing that solves the problem is a system restore?  We can link to problems individuals patch.

  Does anyone else know this?

  The only thing that helps for XP and Win 7 is the system restore?  Looks like corrupted printer drivers (even though it's a bit strange that you experience on the two operating systems).

  Simply download and install a fresh printer driver is not enough.  You have to clean the old one.

  For XP, see His Article.  The critical step is step 4.

  For Windows 7, replace step 4 with the following text:
  Restart the print spooler
  Open devices and printers
  Select a printer (click only)
  Click the print server properties in the toolbar at the top of the window
  Click the tab drivers
  Remove the suspect drivers

  If you can not do what the above because the print spooler is not running, after return and specify which version of Windows 7 you have.

• XP pro have two problems: the system restore will not work and rdpclip seems to work computer

  I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

  Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
  Since that time I have been unable to use system restore from windows system.   only restore I access is
  from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
  I used the restore before so I know it worked before the access help online.

  Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
  computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

  Former title changed, but explains the problem
  XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?

  Hello

   
  1. you receive an error message when running the system restore?
  2. which antivirus app do you use?
  3. what happened when you try to uninstall the program?

  4, are service packs installed on your computer?

   

  To uninstall the application:

  Method 1:

  Run the hotfix, restart the computer and try to uninstall

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2:

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost
   
  To solve the problem of system restore:
  I would sugggest you to go through the link following.
  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  http://support.Microsoft.com/kb/302796

   

• Is the system restore wiped XP Recovery disk space?

  I definitely OE deleted messages, and then wipe the hard drive.  I need to do a restore of the system because of an annoying popup Windows start happened after deleting some files after you uninstall an HP printer.  A system restore will cancel the changes on the hard disk, allowing thus the recovery of these messages permanently deleted using Recuva or another program recovery?  That I don't want to happen as I am to get rid of the computer (I bought a new).

  If you you debarrassez of your PC anyway, why not simply wipe the hard drive with a program of format-based security (Google can help)? Even if the system restore does not return emails, there is still a lot of information on this computer, so that you can not someone else access using a different type of deleted file recovery program. Never made a purchase online? Access your bank account? May make changes to your social security account or 401k? It's all there somewhere.

  If this a brand like HP or Dell PC, you should have a recovery or disk partition which will allow you to restore the first day.  Which will be enough to thwart the average snooper a little better than average.
  If it's not, and you have the OS disk, you can wipe it off yourself and do a clean install.

  SC Tom

• Undo system restore option is failed upwards in the system restore menu.

  Original title: Undo system restore?

  My sound doesn't work on my windows XPS, I did a system restore, but not to the point of restoration before the sounds stopped working because it didn't go that far back. but now, I want to cancel the system restore because it has messed up my computer, but undo system restore is not an option in the menu of system restore. What should I do?

  Hello

  1. were you running safe mode system restore?

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  I suggest you to refer the link below which will help you put the sound on your computer.

  No sound: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

  Hope this information is useful.

• I have Microsoft XP 3 package and some how I lost the ability to restore the system. How can I reinstall the system restore on my computer please?

  I have Microsoft XP Package3 and somehow, I lost the ability to restore the computer to an earlier date. How can I reinstall the system on my computer restore it please?

  Thank you.

  Santosh Mathur

  E-mail address is removed from the privacy *.

  Help us understand what "I lost the ability to restore the system" actually mean for you...

  Are you unable to launch/open the system restore?
  Are you unable to create a new Restore Point manually?
  Your system restore calendar is empty dates?
  You preform a restore and get a message that has failed or nothing has changed?

  If the restore in safe mode will not do, keep reading:

  It would be useful to know a few things about your system:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• After the system restore, previous my library of Documents found, just empty My Documents, which is renamed My Documents 2012

  System Restore was launched twice, then at an earlier date, where I was sure that my Documents were not be corrupted which was 02/11/11.  The first restoration

  has been much later.  I get most of the functions return, but I have lost a library under My Documents (which consisted of many legal documents and information)

  I renamed existing My Documents to My Documents 2012 so that if I find the original game, none should be lost.  Listing of those lost is a surprise

  Since the system restore should return up-to-date information.  A the original operating system installation would lead me to the day. IMicrosoft Fixit has

  reported that icons have changed in their search for files and folders.  Is there a way I can locate the original program of My Documents effective

  02/11/11. I also saw generic files, not as My Documents, but the existing replacement have been replaced.

  Hi RoseForbes,

  Follow the steps in the article.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  The system restore service does not work in Windows XP

  http://support.Microsoft.com/kb/841568