The TMS Configuration backup

Similar Questions

• Z210: Bad support/problem with recovery of an Z210 system when changing the RAID configuration backup

  My Z210 accompanies stripped Bay RAID-0, which currently consists of 2 x 1 TB HDD where the OS partition. I want to change that in RAID-1 mirror, but as the application of TSRI does no such RAID level migration, I thought I would try another approach.

  As a solution, I'd do a backup using the Windows backup and restore application. Then, I would change the table using the Boot ROM TSRI before restoring the backup to this new array. But obviously backup 1.9 TB in a table of 932GB will not

  So, to make a backup, I firstly disabled 'System Protection' and the file 'Page '. This allowed me to reduce the OS partition to about 50 GB using disk management. Then I re - activate 'System Protection' and the 'Page file' before making the backup and the creation of a system recovery disk. This resulted in a backup of 35 GB that I stocked up on a USB external drive. And now a backup of 35 GB can fit on my reconfigured 932GB RAID - 1 mirror

  As such, I cold booted my system and during the boot process, I pressed CTRL-I to get the State of mind RAID Intel Boot ROM. you, CTRL-I've worked only if I started cold and the HP USB keyboard directly connected the first USB slot at the back of the system. The first USB slot is at the top left when you look at the back with the portrait of the tower. Connect the HP USB keyboard in USB port or in the hub of my Dell monitor does not allow me to access the ROM to Boot Intel RAID!

  HP should really study this fault

  In any case, when I could access the Intel RAID Boot ROM, I deleted the RAID-0 stripped existing and created a new RAID-1 mirror. Obviously, the process is destructive and wipe the BONES of the table but that's what my backup was to

  Then I started on the Windows system recovery disk, plugged the USB external drive and proceeded to recover my system.

  Everything worked as expected with the operating system partition uses about 50 GB. A simple trip to disk management enabled me to extend the volume to occupy the space allocated, as presented by the RAID-1 array. As such, I find myself with about 932 GB partition that appear in the windows disk management tool. After a check disk and reboot (which fixed some minor issues) all seemed well.

  But no, everything was fine

  Well that ROM boot RAID Intel sees that a mirror RAID-1 about 932 GB and the operating system sees a partition about 932 GB, both as expected, demand for Intel RST in windows States the following:

  

  I don't seem to have indication of what type of table, it is, an options to change the name of the table or an option to check the integrity of the array through the TSRI application in windows. If something is screwed

  But after the update for the application of iRST version 10.6.0.1002 Intel (the newest HP of) version 11.2.0.1006 (version Intel got very practice), the question seems to correct itself. Now the RAID, Windows boot ROM and the request of TSRI in Windows all agree that the table is indeed a mirror RAID-1 932 GB.

  

  I don't know what caused the problem, if it's related to something that was wrong with the process that I used, if she is simply resolved by reinstalling driver, or if this is a fix for a known issue that Intel has included in their questions later from the pilot.

  But what I know is that Intel has resolved a number of issues in the version 12.9.0.1001 driver (which is the latest version for the Cougar Point chipsets) compared to the old driver version 10.6.0.1002 HP has on its support page for the Z210.

  And HP seems unwavering in his lack of interest in the Intels 12.9.0.1001 test pilot and then make it available on its support page for what is a product still under warranty

  It is a mediocre service if you ask me...

  Some HP forum administrator or HP support person hide these forums should impose it in the HP management station and get it looked at. The Z210 is still under warranty for some customers and HP needs to pick up the latest drivers available to all suppliers, test them and then release them to their customers via the support page for this product. All the rest is little change us all.

  I was able to resolve the application problem Intel RST by updating to the latest v11.2.0.1006 Intel driver but it has highlighted a few points that HP should address, see linked post above.

  PS: Add this post so I can mark the thread as solved.

• Unable to save the current configuration (backup) - it is now resolved!

  Endpoint has expired. Check for IP, password, space or access related issues. #

  I ended up connecting to a laptop computer directly in the uplink switch to a virtual LAN management port. I'm using the correct user name and password. I have disabled the firewall on my laptop. Still no luck. The backup fails every time.

  I use a SolarWinds SCP server. For the remote directory, I just give: c:\SCP

  Can you suggest a different software of the SCP or report a possible solution, please?

  Hi Atle,

  Path you have given is not correct. C:\SCP that the installed application will understand.

  To the FI, you must provide the path to the linux format. For example if you have the ucsbackup under the C:\SCP folder, and then specify the name of the folder in the remote path.

  Otherwise you can leave it blank as well.

  . / Afonso

• TMS Configuration Dump

  Is there an equivalent of xconfig or xstatus TMS?

  I am creating a document as built to deliver to clients and operations, and I'll have to copy each field one at a time.

  Is there a better way to do it, maybe a way that I can get the TMS configuration in a spreadsheet or CSV any.

  If need be, I'll go into the SQL to get data, but I don't really know how to do either.

  Advice, tips or advice that someone wants to share?

  Hi michael

  There is no xstat xconf for tms. Everything is contained in the tmsng database.

  So, you can install sql Management studio, back up the database, restore it to another sql server. Then connevt the tms to her application.

  The db contains practically everything. Including the keys to unlocking and keys options. Telephone directories a config backups since endpoints etc. etc. The table in the db that speak you a little of the tms is the dbo.tmssetting. But I would not waste his time in there if your not comfortable with it.

  Sent by Cisco Support technique iPhone App

• How can I configure Time Capsule 3 to and Motorola NVG589 to access the Time Capsule backup drive?

  I have ATT Uverse service and am ok with the performance of the WiFi of the NVG589. I want to configure my Time Capsule 3 to extend the network and be able to access the drive for backups Time Machine. I think I am following the steps in Airport utility, but once installation is complete I can find is no longer the time Capsule.

  I want to configure my Time Capsule 3 to extend the network

  The time Capsule cannot "extend" the network Uverse using a wireless connection, if that's maybe what you're trying to do. The time Capsule can only wireless "extend" the signal of another router from Apple.

  The Capsule can be configured to extend the network to Uverse if it is connected permanently... anytime... to the Uverse router using a connection through wired Ethernet cable.

  Please specify on what you're trying to accomplish, so that we can provide the correct steps.

• How do I configure backup so it retains only the 3 most recent backup games?

  How do I configure backup so it retains only the 3 most recent backup games?

  > don

  Original title: Windows backup

  Hi Don,

  Welcome to the Microsoft community where you can find all the answers related to Windows.

  According to the description, you are having problems with Windows backup utility.

  Unfortunately, you cannot set a number for the amount of backup sets that you can keep. Once you perform a backup it will overwrite the existing backup.

  Meet us if you encounter problems with Windows backup or any Windows question, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Mac Air 1.3 Ghz i5, 4 GB ram end of 2013 everyone upgraded to El Capitan with the same configuration?

  worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive

  would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?

  FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.

• What exactly does the Time Machine backup?

  What exactly does the Time Machine backup?

  We have a Mac Pro towers (NOT for sale) and Mac mini with several hard drives installed internally.   Time Machine backup all internal disks or just the boot disk?   This can be configured?

  Time Machine backs up your default boot partition. However, if you have more than one drive or partition on your Mac (and it is formatted in "Mac OS extended (journaled)"), you can set the Time Machine to save these drives too. You can do this by removing these drives from the list of excluded items in System-> Time Machine-> Options... Preferences, so that the next backup will include all internal hard drives or partitions that you want to back up too.

• Adding the Polycom HDX to the TMS system

  How can I add a Polycom HDX system in TMS to manage?  What, if any configuration on the Polycom system must be made, or in the TMS?  Can't seem to find any documentation about it.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TMS/interoperability/Cisco_TMS_Product_Support.PDF

• WLC Configuration backup

  Is there a way to start a backup of a series of WLC 4400 of the CLI configuration?

  (1) connect controller cli.

  (2) enter transfer upload config datatype

  (3) If you want to encrypt the following

  (a) enter transfer encrypt enable

  (b) enter transfer encrypt whole-key

  (4) enter transfer upload Ipserver

  (5) enter the download transfer path

  (6) enter transfer download filename

  (7) enter the beginning of transfer download

  (8) to confirm the give 'y '.

• Problem with the commissioning of Web check-in and ASK when swicht to the TMS Provisioning extend mode

  Hi, I need help please, because I have no contract and I cannot open a TAC case.

  I have the following two issues:

  1. when I do the tms extension preparation mode switch as stop working sip calls, I get the following error of internal and internet scenarios for my internal network:

  VCS-e when the call is the Internet to the internal network

  2013-09 - 05T 11: 50:38 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="authorization not valid - insufficient privilege" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7449"Dst-alias-type ="H323"Dst-alias ="anthony_accardi"call-number ="1a069dfa-1647-11e3-86f9-0010f328943a"Tag ="1a069f44-1647-11e3-b22f-0010f328943a"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:20:38, 670"

  VCS - c when the call is internal network to the Internet:

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ="812a52e2-1647-11e3-93c9-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:31, 687"

  2013-09 - 05T 11: 53:31 - 04:30

  "" "" "TVCS: Event = 'research has attempted" Service ="H323" CBC-alias-type = "E164" CBC-alias ='7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="812a5198-1647-11e3-ba89-0010f325da04"Tag ='812a52e2-1647-11e3-93c9-0010f325da04" detail = "searchtype:ARQ" Level = "1" elements UTCTime ='2013-09-05 16:23:31, 680"

  2013-09 - 05T 11: 53:23 - 04:30

  "" "" "" "TVCS: event = 'Search is complete" reason ="prohibited" Service = "H323" type-aliases-Src ="E164" CBC-alias = '7429"Dst-alias-type ="H323"Dst-alias ="vianyfel_cordaro"call-number ="7c9181c4-1647-11e3-bda8-0010f325da04"Tag ="7c918304-1647-11e3-865b-0010f325da04"detail ="found: fake, searchtype:ARQ"Level ="1"elements UTCTime = '2013-09-05 16:23:23, 974"

  BUT WHEN THE MODE IS AGENT LEGACY TMS ALL THE CALL WORKS FINE

  2 when I switch I can tms mode of preparation I can do internal network equipment supply but not from the outside and this worries me more is the jabber that being Internet I get the following error:

  013 09 - 05 T 11: 07:42 - 04:30	"" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 263"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"
  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Dst - ip ="192.168.0.252"Dst-port ="25084"
  SIPMSG:
  | SIP/2.0 401 Unauthorized
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  To: ; tag = ba0e03ca2f6b3957
  Server: TANDBERG/4120 (X7.2.1)
  WWW-Authenticate: Digest realm = "TraversalZone", nonce = "b40cb8278b4a11da992154324161d566d2b57bac3d83c5c518c4528c790d", opaque = "AQAAAN1NC9IHdFS3kNJ3Q6UX2JiBXhut", stale = FALSE, algorithm = MD5, qop = "auth".
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Dst - ip ="192.168.0.252"Dst-port ="25084"detail ="sending = 401, method = OPTIONS, To = sip response Code: 192.168.0.250:7001, [email protected] / * /"

  2013-09 - 05T 11: 07:42 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level ="DEBUG": Src - ip ="192.168.0.252"Src-port ="25084"
  SIPMSG:
  | Sip OPTIONS: 192.168.0.250:7001; transport = tls SIP/2.0
  Via: SIP/2.0/TLS 192.168.0.252:5061; branch = z9hG4bK4de281330ed1277914e57a4bb98ac81416134; received = 192.168.0.252; rport = 25084
  Call ID: [email protected]/ * /.
  CSeq: 38570 OPTIONS
  Starting at: ; tag = 21e96c96b3f9a439
  TO:
  Max-Forwards: 0
  User-Agent: TANDBERG/4120 (X7.2.1)
  Support: com.tandberg.vcs.resourceusage
  Content-Type: text/xml
  Content-Length: 250

  25075024960|

  2013-09 - 05T 11: 07:42 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:42, 261"Module ="network.sip"Level = 'INFO': Src - ip ="192.168.0.252"Src-port ="25084"detail = 'receive the Request OPTIONS = method, Request-URI = sip: 192.168.0.250:7001; transport = tls, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" "TVCS: elements UTCTime = '2013-09-05 15:37:36, 757" Module ="network.tcp" Level = "DEBUG": Src - ip = "10.10.10.1" Src-port ="10191" Dst - ip = "10.10.10.10" Dst-port ='5060"detail = 'TCP connection is closed"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level ="DEBUG": Dst - ip ="10.10.10.1"Dst-port ="10191"
  SIPMSG:
  | SIP/2.0 404 not found
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191; DefaultZone = ingress-box
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />; tag = c4114db76ace49d8
  Server: TANDBERG/4120 (X7.2.1)
  WARNING: 200.11.230.253:5060 399 'political response '.
  Content-Length: 0

  |

  2013-09 - 05T 11: 07:36 - 04:30

  "" "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 641"Module ="network.sip"Level = 'INFO': Dst - ip ="10.10.10.1"Dst-port ="10191"detail = 'send = 404, method = SUBSCRIBE, To = sip response Code: [email protected] / * /, [email protected] / * /"

  2013-09 - 05T 11: 07:36 - 04:30

  "" TVCS: elements UTCTime = '2013-09-05 15:37:36, 638"Module ="network.sip"Level ="DEBUG": Src - ip ="10.10.10.1"Src-port ="10191"
  SIPMSG:
  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0
  Via: SIP/2.0/TCP 201.210.111.54:2379; branch = z9hG4bK5fc6a3c5021e3557216ef01c2434fb00.1; received = 10.10.10.1; rport = 10191
  Call ID: [email protected]/ * /.
  CSeq: 301 SUBSCRIBE
  Contact: <> [email protected]/ * /: 2379; transport = tcp >
  From: <> [email protected] / * />; tag = 2991aa56d191ede3
  To: <> [email protected] / * />
  Max-Forwards: 70
  Directions:
  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows
  Expires: 300
  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1
  Accept: application/pidf + xml
  Content-Length: 0

  The setup I have is:

  

  Configuration on VCS Expressway:

  TMS Agent Legacy mode

  Search rule:

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  Search for DNS zone rule

  Any

  AllZones

  NO.

  Alias matching

  Regex

  (?. *@%localdomains%.*$).*)

  Leave

  Continue

  DNSZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  Presence PUA - on

  Presence server - off

  CONTROL VCS:

  TMS Extension commissioning of fashion

  Search rule

  local area-no domain

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Replace

  Continue

  LocalZone.GetDaylightChanges

  local area full URL

  Any

  Any

  NO.

  Alias matching

  Regex

  (. +) @domain.com. *.

  Leave

  Continue

  LocalZone.GetDaylightChanges

  Search of covered area rule

  Any

  Any

  NO.

  Any alias

  Continue

  TraversalZone

  External IP address search rule

  Any

  Any

  NO.

  Any IP address

  Continue

  TraversalZone

  Transform

  Transform the alis destinations to URL

  ([^@]*)

  Regex

  Replace

  ------[email protected] / * /

  PUA - on

  presence server - on

  I do not have political appeal hace

  Please help me to see what I'm missing or what's wrong?

  Thankss

  Hello

  Ok. Are you saying that VCSe uses the IP address 10.10.10.10 in interface external, right? Of course, what the IP address of 200.x.x.x? It's your VCSe NAT IP address, right? What is this configured in VCSe?

  Well, reaally you have a problem of NAT. look at the SUBSCRIPTION message of jabber to VCSe:

  SIPMSG:

  | Sip SUBSCRIBE:[email protected] / * / SIP/2.0

  Via: SIP/2.0/TCP 201.210.116.201:3612; branch = z9hG4bK138dca6bf6cdd458588900dbaf7b45f4.1; received = 10.10.10.1; rport = 9368

  Call ID: [email protected]/ * /.

  CSeq: 301 SUBSCRIBE

  Contact:

  From: [email protected] / * />; tag = 1e82c817dc3224d5

  In: [email protected] / * />

  Max-Forwards: 70

  Directions:

  User-Agent: TANDBERG/774 (4.6.3.17194 PCS) - Windows

  Expires: 300

  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.6.3.17194;clientid="S-1-5-21-1078081533-484061587-725345543";connectivity=1

  Accept: application/pidf + xml

  Content-Length: 0

  Do you see? If the Red 192.168.41.205 IP address is the IP address of your router/nat, then you can come to the conclusion that your router is inspection/ALG, it puts its own IP address in the SIP headers. Your router/firewall device should not use any function ALG/inspection, otherwise you will have problems.

  I can say with great confidence, VCSe rejects the message SUBSCRIBE "404 not found" response because VCSE does not recognize this IP address in the field 'road', 192.168.41.205.

  In addition, the configuration of your NAT is not recommended. First, you use the port-based NAT (PAT), in fact, you must use a NAT. Second, when your NAT firewall allows VCSe, the source address is 10.10.10.1, which means that your firewall is NATing the source address and destination address not only. This type of NAT, it is not recommended for h.323/SIP applications.

  Well, don't be angry with me, I try to help, but I need to say, your deployment VCSe is almost completely false, there are a lot of blind spots.

  I suggest reviewing and reconfigure your deployment following this guide:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.PDF

  I hope this helps.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Replace the TMS device

  Hi all

  I only appliance TMS with VCS and TMSagents (applications MOVI), then my TMS has error and had to be replaced by a new.

  is there any procedure to do this replacement for the TMS have TMSagents with VCS to ensure that replication will not be problem. Sorry, I just worriying on replication to be failed.

  because I have a large number of users MOVI.

  Thank you all

  Hello Kalinda

  What kind of error you see on the server of TMS? Maybe the ist possible to fix it?

  Before you replace your server TMS device, you need schedule downtime for maintenance.

  You should back up your sql database and the agent MSDS database. Then install the new TMS server with the corresponding version of the former and restore and backup agent MSDS database. You can then enable replication again.

  Keep in mind that the TMS appliance server is EOL and EOS, but also you can be able to take advantage of the Cisco migration program.

  Please visit this link:

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11305/ps11316/ps11338/end_of_life_notice_c51-683062.html

  Concerning

  Rafal

• Allow outgoing SIP URI dial on the TMS system Type: room

  Hello

  I ve added a VC-end point unsupported to the TMS with system Type: room.

  If I check the planning parameters on MSDS for this endpoint, I see that I can only plan entering, but not outgoing calls.

  We´re with the help of BBFRR and if I book this endpoint in a Multipoint meeting, I get an error of TMS routing, because the outgoing call missing clearances characteristic.

  Is there a way to activate the planning coming out for this type of endpoint?

  Is it possible to configure the device manually type for example in the MXP880 to get the outbound features?

  Is there maybe a flag in the comic book, were I can define the type of device manually?

  Thank you

  Tino

  System of 'room' type is intended for endpoints that TMS does not support, but which can be saved to the guardian or register SIP (and therefore be composed by any other endpoints). MSD cannot control endpoint, it cannot force the end point to dial a number to someone, but logical routing TMS allows incoming calls, because it assumes that the doorman / SIP registrar can route calls to it.

  Makes sense?

• Windows backup - Some Confusion over the Date of backup

  I have back up once a week on Removable Drive L:

  When we look at control panel > backup and restore, I see that my last backup was on January 3, 2011, as planned.  I also see that three files have not been saved because backup Windows could not find them.  No problem.

  When I look at the Drive: Explorer > computer > l: However, I don't see that the folder that contains the backup is dated 12/26/2010 under "update."  I remember correctly, is that it is all the time that I turned on my backup to a C: partition on my removable disk L:, probably create this folder on the first backup on removable disk L:

  As time passes, the backup on L: folder should not reflect the date of the last backup?  How can I know that the backup works (see other than the correct data in the control panel > Backup and Restore)?

  Here are the results: right click on the inf file: containing the backup (the file displays the "Save" icon), then the properties > Previous Versions shows no available versions.  Properties > general tab shows the typical parameters of a file; e.g., size of 0 bytes, date of creation, etc.

  Because it is a folder, there are no properties > Details tab.

  Dating back to the control panel > Backup and Restore > manage space, I see that two backups are stored in the inf file: Reader corresponsding for scheduled backups performed two since I have configured backup for this drive.  Everything seems normal.

  On further reflection, it seems that Windows 7 works normally, because the "Date Modified" column in Explorer mode don't not one) that reflects the changes made to existing files in a folder root or additons b) new files/folders in a folder root were made; rather the 'modified date' refers only to the changes that could be made to the properties of the folder root after its creation that is, in terms of sharing, security, etc.

  Since Windows 7, at least, you have no control over the name of the backup that is created and used for the backup folder, and there is (apparently) no exception to the general rule of Windows about how the "Date Modified" column is - at least in the case of backups - it seems that a user is more or less in "trust me". , rely solely on the information available in the control panel > restore and backup to determne if the backup does not work (other than to do a restore of your time immediately after the backup, not a good idea).

  I guess that the preschoolers old like me just feel more comfortable using the Explorer to display the properties for the actual backup file and see the date of creation.

  Maybe a suggestion that might be implemented in next SP?

• Check if the TMS directory is accessible from codec

  Hi all

  I'm starting a new configuration of telepresence. I have problems with directories. Seems that codec are not even trying to search the TMS directory.

  How can I check if the codec is configured to query the directory TMS?

  In "Advanced-> directory server 1 Configuration" ID has the default value, type MSD and URL to http:///tms/public/external/phonebook/phonebookservice.asmx

  When users press the directory key in remote control no shows, only my Contacts.

  Thank you

  Concerning

  Thanks for the update - the question is usually a proxy or a firewall - your endpoints need to have direct access to port 80 on the box of TMS on the subnet, they are on.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.