The tool brush Flash CC suddenly stops drawing when the step is small

Similar Questions

• Fuze suddenly stops and then powering Refreshess

  I recently started having a problem with my rocket GB 8.  When you listen to MP3 or WMA files the player suddenly stops.  When I restart happening in mode 'Refreshing Media' and made his thing.  Everything seems normal after the update, except that he may well repeat the same thing again in a few minutes.

  This happens only when I physically move the player - could be a kind of stress with the power cord.  It doesn't happen when I'm listening to the FM band.  So far, it does not happen when the player is locked (but can go in as soon as the player is unlocked).  I usually use a 4 GB SD card, but the player he will be with the card inside or outside (I usually Podcasts on the SD card and my music on main memory.  It happened while listening to the SD card or the internal memory (but no FM).

  The version is 1.02.026A.  The problem is not new and does not seem to be associated with this update.

  Black Rectangle wrote:
  Call 1-866-SANDISK in the United States (or search for a number corresponding to your country) immediately. Don't waste time on the e-mail system. Especially if you have just one week left.

  In fact, I used their online chat (it's fast and I end up with a paper trail).  The agent had me do all sorts of things in the sense you suggested and asked that if this does not work which I repeat by using another computer.  A little pain as the freezing problem not immediately shows up (so it takes awhile to find out whether the problem is resolved).

  The problem persisted in various forms and I contacted them again via chat - in view of the extensive literature that produce the transcript of the conversation, they conceded that it was a hardware problem and provided an RMA (most paid shipping charges).

  I guess I should check the box of "resolved".

• Professional tool 2015 brush Flash CC attracts only straight lines! THE PREVIOUS SOLUTIONS DO NOT WORK

  Hi, I have a student subscription and have had the intelligence of worse trouble... : Flash. Each time it updates the tool brush stops working and draws only straight lines. I use a dual monitor set up with Windows 8 and a Cintiq 13HD. I tried to change my display settings to 100% which was recommended as a solution - it worked the first time, but no longer works. I reinstalled both Flash (latest version) and my cintiq drivers. It still does not work. I don't see the point of my payment for your subscription if the software does not work! It is totally unacceptable and extremely frustrating when I have to work to deadlines. Please have a specialist contact me immediately and secure it to the

  Kristofer Hey,.

  Thank you very much, but when I tried this, my pen wouldn't work, just the mouse. Anyway, I changed it to what it was before (extended desktop computers) and it seemed to work. I don't know what makes the work because I had not tried before making changes today, but fingers crossed it stays like that!

  See you soon

• Satellite Pro M10 suddenly stopped starting or to reach the POSITION

  Hi all, hope someone can help or advise me on what to do.
  My Pro M10 suddenly stopped starting or to reach the POSITION.
  When the switch is pressed, green light turns on and stays on and that of about it, no display and not even the rotation of the fan to the top. :(

  Funniest, it is the battery always fresh and is fine.
  As you know, this model is out of warranty now and I'm technically minded and disassembled laptops before so I don't mind open my machine.

  Just thought I would ask here first before doing so.
  Hope someone can point me in the right direction of what's wrong, have heard a rumor that the M10 with a video fault, but surely would not stop the machine POST'ing would still.

  Thank you very much
  JayZ

  Hi Jay,.

  Difficult to pin-point your problem remotely as you will understand, however, I expect the laptop either emit a series of beeps (in a type long, short of the boss) or else Flash HQ led to give some clues as to the reason for the failure of the POST.

  First I'll try to remove/replace the modules of RAM, hard disk and also the optical drive to see if it improves the situation. Otherwise, I would tend to suspect the motherboard failure.

  Kind regards

• Hi my printer suddenly stopped and execution runtime error. Question of debugging Microsoft Visual c ++ runtime library. I have reset the drivers but still does not. It's windows vista 32 bit

  Hi, my printer has suddenly stopped.

  Program c:\windows\windows\system32\spoolsv.exe
  c:\windows\windows\system32\spool\drivers\W32X86\3\lxdidatr.dll

  Run the time check failure #3-la variable is 'sinumberofTopic' is used without being defined
  If I try again it said failure of the assertion
  File dmrclibrary.cpp
  Line 415
  Expression: m_hlibModule

  First of all, you can try using system restore if the problem just started happening.

  Go to your Start Menu > Accessories > system tools > system restore.

  Select a point of dated system restore to before the problem started happening and then restore your system at this point. During the system restore, you can restore the configuration of your system and you will not lose any personal data, the system restore affects only your configuration.

  After doing the system restore you don't like something that has changed on your system, you can "undo" the restoration of the system.

  If the system restore is not an option for you, or System Restore does not resolve the problem, you can take the measures put forward in the Microsoft Knowledgebase article below:

  You can also try diagnostics automated web site Windows Fix It:

  http://support.Microsoft.com/GP/printing_problems

  or take the advanced stages described in the following knowledge base article:

  http://support.Microsoft.com/kb/810894

• My computer keeps showing random parts "suddenly stop working" and the computer needs to reboot - I think it's a virus.

  I have a problem when occasionally and randomly my computer components apparently all of a sudden "stop working and must close ' which translates into my computer restart itself. This happens a lot, but I can not associate with any particular issue, as it changes each time. I think it's a virus, but nothing seems to be wrong, it's just the inconvenience. I had the computer more than a year and nothing wrong with it. The only other common thing is a program called "twonkymedia" seems to be on my pc and "must be closed", but I can't find anywhere to remove it.

  It's driving me crazy now, as can happen at any time during the game, work or other passtimes of the computer.

  Hello

  1 make thorough scrutiny for malware and don't forget no one program intercepts all methods of overkill use so much.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-ID/default.htm

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Service Windows wireless suddenly stopped working because of problem with the KeyIso service

  Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

  Hello

  What is the antivirus installed on the computer program?

  KeyIso Description:

  The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

  Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

  Method 1:
  

  Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

  a. Click Start, type services.msc and press enter.
  b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
  c as. under the general tab, change the startup type to Automatic and click on the Start button.
  d. click on apply, then ok.

  Method 2:

  To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  You can uninstall and reinstall the network card and check.

  a. click Start, type Device Manager in the Start search box and press enter.
  b. locate the network adapters and expand the same.
  c. Select the Wireless connection, right click and choose Uninstall.
  d. restart the computer, if prompted.

  Drivers should settle automatically after the computer restarts.

  Now you can install the latest network card drivers and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Response with status so that we can help you.

• Note the tool works do not suddenly in CS6

  I use Ps CS6 and note tool suddenly stopped working. Displays Panel but cannot enter any text. Any ideas?

  To answer my own question, comes to realize - even if I used it for years - that when you click to display the note tool Panel, it does not automatically create a new note until you also click anywhere in the working area and the small yellow icon. Too easy.

• OSX suddenly stopped and restarted but does not restart. Lines of color on the screen

  Hello

  I'm on OSX 10.10.5 (I think) at least, I use EL Capitan. I can't tell the exact version, because my computer does not start correctly. The software is installed on an I mac for some time around mid-2011.

  The day began like any other day. I turned on the computer. Opens the web browser and lightroom. All of a sudden my screen turned gray and my second was a line downwards in the Middle, almost as if two screens of office have been posted on a monitor. Screens flashed several times with some funky patterns and then the system restarted with a carillon.

  When he did, white vertical bands turned towards the bottom of the screen while the Apple was displayed at startup. Sold turned screen gray, then rebooted again. This time, the bands were purple. It's the same thing again but next time the lines were orange and the system restarted a third time. At this point, I turned the computer off and tried again, but I was immediately greeted with several orange bands.

  Can someone help me find a solution or help me pin point the problem?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• My ability to thunderbird to receive the mail suddenly stop and it worked before. What can be the reason? Now, I'm not able to receive all e-mails.

  My ability to thunderbird to receive the mail suddenly stop and it worked before. What can be the reason? Now, I'm not able to receive all e-mails.

  This forum is the official place to support Thunderbird. There is no phone support.
  If you think that this helps to explain the problem, you can add a screenshot to your message.
  You are supposed to follow instructions and suggestions that precede.

• The keyboard and mouse bluetooth suddenly stops working

  I asked this question before using Dell, but none of the answers provided.
  The keyboard and mouse bluetooth suddenly stops working.

  Given that this only happens when I'm online I make this question to the FireFox support.
  I have the latest version of FF:

  I installed the new BIOS and Shipset, but that does not change.

  Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

  R

  FredMcD said

  Keep a log of when this happens. What did you do when...

  Check the batteries.

  Hello

  Thanks for the help

  Just for information:

  I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

  Concerning

  R

• the sound has suddenly stopped working

  I have the Macbook Pro (15, early 2011), 10.11.6 version. Cannot determine why it suddenly stopped - checked its prefs, tried using headphones, or worked. don't have not added any new software-worked yesterday, today is not. has ran disk utility and I TTPro 7, Drive Genius and Disk Doctor, but those who seem to be more inclined to look at files, storage, etc.. Warranty is out. any ideas, anyone?

  Try troubleshooting help here > troubleshooting problems with no audio from speakers on the Mac - Apple Support

• suddenly stops when the external usb hub is attached

  My imac 27 inches 5 k 2015 suddenly stops when an external USB hub is attached supposedly designed specifically for the mac. (Cutting) The mac does not start I have to unplug it and reconnect to restart. I tried different hubs of this manufacturer and all do the same thing. Remove the hub, the computer is fine. Any ideas?

  Well, try an another factory USB hub, I had good success with USB hubs powered from Belkin.

  Question... are the hubs help powered or are bus powered USB? They are bus powered USB is your problem, the USB ports on iMac didn't supply enough power to power bus-powered USB hubs.

• For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  For some reason any my iphone 6 has suddenly stopped to reduce emails, they are just sitting in the waiting area, I'm running on iOS 9.3.1 can anyone help.

  Hello. Try a few troubleshooting steps here: get help with Mail on iPhone, iPad and iPod touch - Apple Support

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.