The two speakers play left audio channel only.

Similar Questions

• 15 n series Pavilion: Pavilion 15 computer n097sa laptop. L and R audio that passes through the two speakers at the same time.

  Hi, so basically, I just upgraded to this laptop 15 n097sa (new to me) of my old sucks, and it's so much better.
  Only, I just noticed that when his left or right is out at the same time the two speakers. I noticed you access with your headphones. the left certainly comes out the left a little more and the right thus respectively, but they always come out of two speakers much.
  To clarify that, the only left channel is coming from the two speakers at the same time, instead of just the left speaker. And similarly for the right channel.
  I only did a real test on youtube videos of stereo test, even I tested it on my old acer before, that came out of the correct speakers.
  I have a sound dts, no matter who is and it could be reduced to just change the settings, but I don't think that's it.
  Does anyone else have or had this problem too?
  I know I'm a sucker for pc, but please go steady on me, your.
  Win pro 8.1.

  will you please and thank you very much indeed, couch.

  Malygris1 wrote:

  Hi there @SofaQueue

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with the audio balance on your laptop, and I am happy to help you with this. First of all, I would say reinstall the audio driver.

  ETC.

  Let me know if you still have problems and view the details of what happens.

  I will mark it as resolved now. Very useful, thanks.
  What I found was the following: I have really no problem at all, it was the parameters of the audio DTS after all.
  Simply turn off the audio improvements and testing showed once again that's all it was.
  

  Thanks again though, nice to see people are willing to help so much!

  Edit: Is PS it OK to mark my answer as a solution? I don't care if or whatnot, it just is the right answer and makes sense. I'll do it if he lets me.

• using outer joins if the two column is null? Use only (+)

  Hi all

  create the table xxc_tr_num (tl_number number, tr_no number tl_no_id);

  insert into xxc_tr_num values (123,100,222);

  insert into xxc_tr_num values (124,100,333);

  create the table xxc_od_tab (tl_number number, tl_id number);

  insert into xxc_od_tab values (123,001);

  insert into xxc_od_tab values (null, null);

  create table xxc_oth_tab (name varchar2 (10), number of tl_id);

  insert into xxc_oth_tab values('abc',,001);

  insert into xxc_oth_tab values (null, null);

  Wait it out put

  tr_no tl_no_id name

  100 222 abc

  100 333

  using outer joins if the two column is null? use only please of outer joins

  And I tried to use outer joins on both tl_id column but not get values and I use have County (tr_no ) > 1

  Rajesh123 wrote:

  Thank you Kiss it is not possible to use having clause?

  You need to understand the functioning of the group. If you will not be asked this question.

  Check this box

  SQL> select tr_no,
    2         tl_no_id,
    3         count(*)
    4    from xxc_tr_num a,
    5         xxc_od_tab b,
    6         xxc_oth_tab c
    7   where a.tl_number = b.tl_number(+)
    8     and b.tl_id = c.tl_id(+)
    9   group
   10      by tr_no
   11       , tl_no_id;
  
       TR_NO   TL_NO_ID   COUNT(*)
  ---------- ---------- ----------
         100        333          1
         100        222          1
  

  See what returns the count? You have grouped according to TR_NO and TL_NO_ID. You must take into consideration the TL_NO_ID just put COUNT (TR_NO) does not increase the NUMBER of the whole group. To get the NUMBER on the whole group, I used the analytical function and did. Like this, see the number of the analytical function here

  SQL> select tr_no,
    2         tl_no_id,
    3         count(*),
    4         count(*) over(partition by tr_no)
    5    from xxc_tr_num a,
    6         xxc_od_tab b,
    7         xxc_oth_tab c
    8   where a.tl_number = b.tl_number(+)
    9     and b.tl_id = c.tl_id(+)
   10   group
   11      by tr_no
   12       , tl_no_id;
  
       TR_NO   TL_NO_ID   COUNT(*) COUNT(*)OVER(PARTITIONBYTR_NO)
  ---------- ---------- ---------- ------------------------------
         100        222          1                              2
         100        333          1                              2
  

  So to answer your question, yes you can't do in the HAVING clause...

• How to increase or decrease the effect of an adjustment brush in Lightroom CC? In Lightroom 5, I could hover over the PIN and drag the two-way arrow left or right. This feature seems to have disappeared in the CC version.

  How to increase or decrease the effect of an adjustment brush in Lightroom CC? In Lightroom 5, I could hover over the PIN and drag the two-way arrow left or right. This feature seems to have disappeared in the CC version.

  I'll answer one of your three messages that asked this question.  If possible, please remove the other two.

  Hover and dragging moves the axis as it should.  The cursor turns into a hand to indicate the area brushed, it moves.

  Hover over the pin code, press the Alt/Opt key and drag left and right and the effect will become less and more.   The cursor turns into a two-headed arrow to indicate that the function of the drag has changed.  If you are not hovering over a pin code and press the Alt/Opt, then the cursor turns into a brush to erase to remove the adjustment every time you paint.

• Can someone tell me the default settings for the internal speakers (Realtek HD Audio Manager) on HP G62 454TU laptop pls?

  I had problems with IE11 and Outlook, both kept gel (not answer) more and more each day.  Outlook is still difficult sign in, I have to sign at least two times and once I got to sign on 7 times.  The drafting of emails, I'd get msg "cannot connect to Outlook - try again later. IE11 is also unstable permanently "unresponsive" my sound stopped working also and I found that he lacked Realtek HD Audio Manager.  It took nearly a week trying to figure out how to reinstall.  (I am 60 years old and not informed techno) Finally, I downloaded and installed (with no help from HP) but speakers still does not.  I approached then Microsoft Help Desk who suggested that reset IE11.  I did it yesterday and now all seems ok with IE11 and Outlook but I have still no sound.   Where to find the default settings for programs that use audio ie itunes, youtube, etc?

  I have only a couple of theories left to isolate the problem, but have no idea how to go on this issue.

  1. I received a msg when I lit the notebook from HP saying storage battery was low and the battery can be replaced.  I've never used this notebook on sector so I ignored msg but with freezes and random low cut that I removed the battery which seems to solve that problem, but I wonder if firm random downs could have damaged files, software or anything.

  2. Windows updates put things here that seem to be more for Windows 8 for example. Touch screen program.   Can we update caused problems for the sound on my laptop?

  I have run virus/malware programs with no threat found.  I also installed Glary to find and fix registry problems, but still no sound.

  Can someone help me please?

  Hello

  I'm sorry for the delay in response and for the inconvenience this problem did you. According to the description of the problem, you can't access your account and receive the error message "unable to connect to Outlook - try again later.

  I suggest you check the service state on https://status.live.com

  Note: you must identify yourself on the site to find out the exact state of the server, your account may be placed on

  I also suggest you to optimize your browser and check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• The external speakers with bluetooth audio playback stops working after 20 minutes

  I have a weird problem with bluetooth audio on my Acer Aspire 7600U. I have a bar of his JBL SB200 with support bluetooth and when I'm playing audio to it from my laptop (Sony Vaio) or my phone (Nokia Lumia) it works fine. But during audio playback of the IOA, the soundbar goes off after about 20 minutes in the middle of a song with such as Spotify. I suspect it's something different with the Aspire AIO bluetooth adapter which does not sound bar to stay on. No idea why? Does anyone else have this problem?

  I have now solved. It's another computer, I had who took control of bluetooth speakers every now and then...

• Toshiba KIRA - 10 d - left audio channel / speaker distortion

  My left speaker is still quieter than the right one, and it often produces a distortion/crackling sound.

  This happens when listening to audio, and same notifications from Microsoft could skew. It is with the audio, set to about 25.

  For example, if I listen to the following audio test:

  https://www.YouTube.com/watch?v=qNf9nzvnd1k

  my left speaker makes a sound of crackling between about 260 and 340Hz. It comes with audio of YouTube value max and my audio portable fixed at 25.

  Any ideas?

  my left speaker makes a sound of crackling between about 260 and 340Hz

  Just a question: have you noticed the same problems of sound using headphones too?

  In case the sound distortion is not noticeable by using headphones, I guess the problem might be related to the failure of speaker... but it's just an idea... know you...

• How to select the right and left a track audio channels in the graphics editor?

  I put my 2 keyframes for gradual and hit the chart next to the Audio levels. Then in the graph Editor to see the slope of the fade.

  I would like to use the Bezier handles to edit bland. But when moving them around it just doesn't move right and left audio channels separately, and I have no idea how to adjust them in unison or at least take the other to the same position as the first.

  Thanks for the help

  In General, audio Ae tools are not only versatile, so do not expect to have a hard time with them. your questions - it seems that if you want to manipulate the keyframes for Audio levels in the graph Editor, you will need to adjust the two handles, one at a time.

  two workaround solutions: I can think of:

  1. If you want to control the volume, it is better still to use stereo mix effects and not audio levels. It also has 2 values, only this time both are visible in the timeline panel if you can drag the two simultaneously (how you couldn't front with audio levels) and manipulate your chart.

  2. If you still want to control audio levels after reading the 1st work around: you can connect your audio levels to a cursor of expression: Add a cursor of expression to your audio layer alt now (Effects-> expressions-> slider control control) click on sound levels to activate the expressions for this layer and drag the pickwhip expression. This will make the slider to control the sound levels and you'll have only one value in the graph Editor.

• How can I get a pan left music to come out of these two speakers?

  Logic Pro x, I have a split track (music on the left) and voices on the right.  I want only the music but when I pan the channel left out only of the left speaker.  How to make the music out the two speakers?

  Right-click on the button String Format. This is the area to the left of the button entry indicating that. The pop-up menu allows you to set the string Format. By clicking the toggle button only between Mono / Stereo

  

  For example, if you have a stereo Audio with stereo Audio track regions, you can choose to 'Left' and the logic set the Audio track in mono, using only the left in the region of the Audio channel. Definition of the string Format to 'Right' will only use the right of the region of the Audio channel.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• How to Exchange audio channels in Windows 7 on laptop?

  I have a laptop of Lenovo Y200.
  When I connect the Bose headphones to the laptop, the left audio channel detaches the listener right and vice versa.
  Bose headphones can be used in reverse.

  Is it possible to exchange the audio channels in the software?

  I use Windows 7 and any way to replace the audio channels in speaker properties widget is not found.

  Hello

  You can't exchange audio channel in windows 7, but you can check if the connection between the headset and the computer is properly connected.

  Disconnect and reconnect the cable between the headphone and the port of the computer and see if it plays well.

• Clip > edit > Audio channels: no Enable

  Page 281 of the first PDF, he States:

  Change the mapping of channel audio source to one or more clips...

  2. in the dialog box change Clip Audio channels pane, do one of the following:

  • Select a format in the Format track list.
  • To enable or disable an audio channel, select or deselect Enable for a source channel.

  I'm trying to find the Activate button in my CS6. So I went to the video suggested in document PDF CS6 and I see the Activate button, but it is not displayed in my first. See screen capture. My window is on the left; the video window is on the right.

  

  Where can I find the enable column in CS6?

  Where can I find the enable column in CS6?

  You do not have... the screenshot in this video is of CS5:

  

• Use hp officejet 5610 all in one and hp scanjet g4050 (the two usb) on the same computer

  Have an officejet 5610 that I used for years to digitize documents, faxes, printing and copying on Acer computer with windows XP. Recently, I moved my scanner flatbed scanjet g4050 wifes to my computer to scan photos and negatives. The problem is when I install the G4050, I can scan is no longer with my Officejet 5610. Get an error message; "An error occurred just by contacting the HP imaging device. Try the following steps. Turn off and unplug for 60 seconds. The cord is properly attached. Reset. Uninstall and reinstall the device. Reinstallation of photosmart software.  Have tried all these. Does not help unless I have uninstall and remove the two devices and reinstall officejet 5610 ONLY. If I reinstall G4050 default folder which is recommended for multiple hp devices work properly then the 5610 can sweep is no longer. Error message as above. Running scan doctor and it says that there is a problem of façade. Go to the solution Center, click settings, scan settings, scan to Setup. When I click scan to Setup, I get the same error message as above. Both devices appear in the HP Solution Center each with its own tab. Is it possible to use these two devices on the same computer?

  These two devices will not be able to work together. The ScanJet uses a newer than the 5610 software the 5610 will not work with. You can try to install the ScanJet, then the 5610, but I don't think it will help. I'm sure that just does not allow two devices on the same computer because the software conflict. I'm sorry.

• The BX18 OTP play SACD?

  Forgive me if this has been asked/answered already, but I didn't know if anywhere...

  The BDP-BX18 plays Super Audio CD?   I had heard that newer models of Sony BD of reading SACD support, but this player I found the Sam Club does not have a lot of information about this.

  Thank you

  Jeff

  Hi Darthmaher,

  The BD player can not play Super Audio CD. refer to page 22 of the manual provided for more information on the types of discs that can be read and cannot be played in the BD player.

  http://www.docs.Sony.com/release/BDPS185_BX18.PDF

  Thank you for your message.

• Multi-cam sequence only ONE AUDIO CHANNEL LEFT, Adobe Premiere Pro CC TIMES.

  Hi all

  I was wondering if someone could help me out here. I have several hours of short clips (1-3 min) of an event of 3 days I am organizing and preparation for editing.  I wasn't on the shooting, but the cameras record the external microphone (main audio) on one channel and the internal microphone (audio reference) on another channel; but it varies on what channel they recored reference main vs.  For the clips where someone talking directly to the camera and I know that I will not need the audio reference, I went and made "audio editing" and mixed the "stereo" until "mono" and then selected the channel with the "audio main' to be source channel.   It works now great when the person talks it comes in evenly on the left and right speakers instead of being unbalanced.

  However, when I then try to take 2 of these clips which were mixed at the bottom of 'mono' and create a new multi-cam sequence, new sequence plays constantly audio only from the left lane.  I tried many configurations where do the multi-cam of sequence (automatic, mono, stereo, Adaptive). Nothing works - he ONLY plays the left side.  I also tried to change the audio channels after I do the new sequence and put "Channel 1" in both channels left and right.  Nothing, he still plays on the left side.

  Any idea on how to get my mono source channel to play regularly in the left and right channels instead of only in the left?  Also, if I try to Pan right in the effects window, it's just quieter, not balanced.

  Thanks for the help!

  Found a solution here multicamera Source Audio sequence of 1 speaker instead of two? HELP Please!

  CTRL + N or command + N for a new sequence, select your preset (in my case DVProHD > 1080i) and make sure the audio channels are all mono. Then copy and paste all your clips into the new empty sequence.

  When I upgraded from Premiere Pro CC 2014 and 2015, all my sequences blocking started playing mono audio through the left speaker only. I'd just create a new multi camera sequence or if I opened one I had created in 2014.

• Only Audio stereo imported .mov file plays in 1 channel

  Hello:

  Only, I imported a .mov file, which, when you look at its properties, said that the Audio is STEREO at 48000 Hz. Yet, when I play it, the sound comes only from 1 channel and the other speaker is silent.  I looked everywhere in the forum to find answers, but none of them seem to work.  Basically, I want to just duplicate the left channel and copy it to the right channel, so the same sound can be heard from two speakers.  (I think that the person who registered used a mono microphone and somehow he went alone to one of the stereo channels).

  Any ideas?

  Use the audio effect of fill (right or left). This will duplicate the right channel on the vacuum.