The UCSC C22 M3 RAM error

Similar Questions

• Satellite L30 - 10Y: error checking after the 2 GB of RAM

  Hello

  I have a Satellite L30 - 10Y ^ months ago I walking the RAM 1.5 GB by adding a card of 1 GB of RAM in the 512 MB card provided it worked well.
  I also have walking my son Hi-Grade lapto with exactly the same specifications of RAM that worked well also. So I decided to grade until my L30 10Y with another card of the same specification to bring it up to 2 GB as specified by TOSHIBA.

  I booted the computer to find Hay presto after the message following the start screen appears * "_the file is possibly corrupted.
  The file header checksum does not match the calculated checksum_ "* the computer then froze and I turned it off."

  Controls, I did tried two cards into the two slots without change, 1 card in both slots (an empty) works very well. Other card in the two sons of slots (works Fine) the two card slots in my computer (works very well) all three cards and 512 MB card in the configuration of the slots and cards (works fine). The three cards 1 GB in all configerations cards and slots to the error message and other times 1 long beep and 2 short.
  Yes, the cards have been installed correctly. Impossible to change something to do with the BIOS, even though it may be accssed. Cannot run dvd player although I can select.

  I went back to 1.5 GB and reinstalled all OS the drive recovery Toshiba try all over again the same results. Running windows Vista Edition family Basic, Bios is the last download. RAM is compatible. Cheep Hi-Grade son accepts that all RAM in all Configurations without sentence windows XP operating system.

  Can anyone think of anything either, I have not tried, or I just have to go and by a Hi-grade computer?

  Hello

  I read your announcement carefully, and it seems that you have checked that everything what is possible
  So in my opinion the two ram modules are not compatible set
  It's the only plausible explanation for this problem.

  AFAIK the L30 - 10Y needs DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

  Finally the short beeps are coming from the BIOS and it means that the error has been detected.

• Hi I HAV a question... I use PS cs6 m having major problem can you please help me... whenever I have use the filter on sumthng Gallery or if I use a Quick Selection over all things low RAm error levonorgestrol tool... Although I have a huge memory?

  Hi I HAV a question... I use PS cs6 m having major problem can you please help me... whenever I have use the filter on sumthng Gallery or if I use a Quick Selection over all things low RAm error levonorgestrol tool... Although I have a huge memory?

  
  

• BIOME-1 error when you run the diagnostic material for RAM test

  In recent months I've known several blue screen errors during startup. Initailly, initially, I thought that maybe it's a hardware error, but after running Diagnostics of material (press F9 to start) and have all the tests passed so I assumed it was a software problem, I focused my attention on that. However, today, I started to run hardware diagnostics and I discovered that I had a RAM issue with the BIOME-1 error code. Is it possible that the hardware diagnostics can not full capture errors and that a RAM issue was first the cause of blue screen errors?

  I called HP support and they sent an engineer to the bottom. After you open the computer case, the cause of the problem has been established as a RAM module that was not properly secured. After getting the RAM module, the blue screen errors did not reappear again. The engineer also ran some tests and confirmed that everything was fine.

• Windows XP: I have 448 MB of RAM available. What happened to the 64 MB of RAM lack and how can I solve this problem. Thank you

  I am trying to install application constant guard Internet Security of Comcast.  After trying to download and install the product, I get and RAM error message indicating I need 512 MB of RAM to install this product, and I only have 448 MB of RAM available.  What happened to the 64 MB of RAM lack and how can I solve this problem.  Thank you

  The only way to see more of RAM is to install a graphics card and disable the onboard graphics of your motherboard. If you do this, you should be able to see all the 512 MB of it.

  That being said, I will repeat what I said before...
  You can always buy more RAM and install it on your motherboard. Go to crucial.com for more information.

  In addition, you should review install 'Internet Security' application or suite. They are not necessary (you can easily configure Windows so that it is very safe) and they often ruin the performance of a PC.

  If you want advice in "hardening" your PC security, let know us.

• My Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1

  My computer (W7/64) sometimes fall to restart. I checked HD and the memory of Mrs. rescue disk - no error.
  Event Viewer says ATAPI: the driver has detected an error in the controller on \Device\Ide\IdePort1.
  The fact is that the cd-rom drive is behaving oddly. Reads the DVD of film without problem, but does not read floppy disks to install Windows (good on an another two comps).
  I therefore launched Verifier.exe and checked the other drivers. The result is dumpATA.sys is not running. (Is BTW not MS driver?).
  How can I force to load this driver?

  I checked the installation disc to compare the original version, boot.win opened, but the pilot is nowhere. Where did it come from?
  So I recorded the dump file, but the analysis of what this file is beyond my capabilities.
  Link to my file https://skydrive.live.com/redir?resid=4AF01405E5CE0354 dump! 114

  You could any body help me to find the source of my problem?

  Thank you.

  These are all good things:

  *****************************************************************************
  * *
  * Bugcheck analysis *.
  * *
  *****************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: 0000000000000020, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc000009d, error state (state code of e/s normally)
  Arg3: fffffa80077f95b8, the current process (virtual address for the lock type 3 or PTE)
  Arg4: 0000000000000000, virtual address that could not be paged in (or the contents of the PTEs if arg1 is a PTE address)

  Debugging information:
  ------------------
  ERROR_CODE: (NTSTATUS) 0XC000009D - STATUS_DEVICE_NOT_CONNECTED
  DISK_HARDWARE_ERROR: Error occurred with disc material
  BUGCHECK_STR: 0x7a_c000009d
  CUSTOMER_CRASH_COUNT: 1
  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
  Nom_processus: System
  CURRENT_IRQL: 1
  LAST_CONTROL_TRANSFER: from fffff80002c7fcac to fffff80002c8bc00
  STACK_TEXT:
  fffff880 '03578-88 fffff800' 02c7fcac: 00000000' 0000007 a 00000000'00000020 ffffffff 'c000009d fffffa80' 077f95b8: nt! KeBugCheckEx
  fffff880 '03578-90 fffff800' 02c74ba7: fffffa80 '077f9550 00000000' c000009d 00000000 00000000' fffffa80' 077f95e8: nt! : FNODOBFM: 'chain' + 0 x 50080
  fffff880 '03578b 50 fffff800' 02c7e617: fffffa80 ' 07654b 50 fffffa80 '07654ba0 fffffa80' 077f9550 fffffa80 ' 077f95b8: nt! IopCompletePageWrite + 0 x 57
  fffff880 '03578b 80 fffff800' 02c8181d: fffffa80' 07654b 50 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiDeliverApc + 0x1c7
  "fffff880 ' 03578 c 00 fffff800 ' 02c4e4fb: 00000000 00000010' fffff800 '00b 96080 00000000 00000000' fffff800' 02c229a0: nt! KiCommitThreadWait + 0x3dd
  "fffff880 ' 03578 c 90 fffff800 ' 02c229fa: fffffa80 '07654b 50 00000000 00000001' fffffa80' 069ed040 00000000' 00000000: nt! KeWaitForGate + 0xfb
  fffff880 '03578ce0 fffff800' 02f29ede: fffffa80' 07654b 50 00000000'00000000 00000000'00000080 00000000'00000001: nt! MiModifiedPageWriter + 0x5a
  "fffff880 ' 03578 d 40 fffff800 ' 02c7c906: fffff800'02e06e80 fffffa80 '07654b 50 fffff800' 02e14cc0 00000000' 00000000: nt! PspSystemThreadStartup + 0x5a
  "fffff880'03578 d 80 00000000 00000000': fffff880'03579000 fffff880 ' 03573000 fffff880 ' 03578a 80 00000000 00000000': nt! KxStartSystemThread + 0x16
  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! : FNODOBFM: 'chain' + 50080
  fffff800'02c7fcac cc int 3
  SYMBOL_STACK_INDEX: 1
  SYMBOL_NAME: nt! : FNODOBFM: 'chain' + 50080
  FOLLOWUP_NAME: MachineOwner
  MODULE_NAME: nt
  Nom_image: ntkrnlmp.exe
  DEBUG_FLR_IMAGE_TIMESTAMP: 5147d9c6
  FAILURE_BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080
  BUCKET_ID: X64_0x7a_c000009d_nt! _ ?? _::FNODOBFM:_string_ + 50080

  And this page explains what you have:
  http://msdn.Microsoft.com/en-us/library/Windows/Hardware/ff559211 (v = vs. 85) .aspx >
  (Short version of an argument 9 d: "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive.")

  It seems to intimate that it's a hardware problem rather than a driver. You say that you are having problems with the optical drive. If you log out, you still have problems to restart or boot?

  This probably isn't a memory problem, but a better method of verification, it is with Memtest86 + http://www.memtest.org/#downiso>
  Download the ISO and then create a CD with it and boot from it. If you have more than one piece of RAM, pull all but one test, then close, replace it with another and test, etc. I find it a little faster than the test at a time.

  SC Tom

• RAM is not visible, I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS. All the 4 sticks of RAM are the same brand and compatible with my motherboard.

  I have 16 GB installed in the case (4x4Go), but only 8 GB has, even in the BIOS.
  All the 4 sticks of RAM are the same brand and compatible with my motherboard.
  I'm running Windows 7 Home Premium 64 - bit, which limit memory is 16 GB, so this isn't the issue.
  I got a few BSOD - 0 x 00000109 - errors that I work.
  I ran memtest86 for a few hours and he scored 4 errors during test cycles 7.
  These memtest errors concern the bars invisible RAM or the work those?
  Any ideas as to what should I do next?
  See you soon!
  Data sheet:
  Windows 7 Home Premium 64-bit
  Intel Core i7-3820 @ 3.6 GHz
  ASUS P9X79
  GeForce GTX 650
  Team elite Dual Channel DDR3 4 GB 1333 Mhz x 4

  Thanks Joel,

  I started to individually test RAM when I noticed a quirk in the way they were organized in their locations.
  I downloaded the manual for my P9X79 and he confirmed that they were arranged in mirror mode.
  I switched two of the sticks to adjacent slots and, Lo and behold, the full 16 GB presented at startup.
  So that's one mystery solved at least.
  I'll raise the memtest to see if it includes several errors and if so will continue to individually control the RAM sticks.
  Thanks again.
  Nick

• Fehler bei Videovorschau - Fehler beim create movies. (Error in the video Preview - 'film compilation error. Unknown error.)

  Hallo,

  ICH habe seit Kurzem problem beim Exportieren aus Premiere Pro 2015.2.

  ES opens sich ein Fenster mit found message:

  "Fehler bei Videovorschau - Fehler beim create movies. Unbekannter Fehler . »
  
  As sharps Fehlers habe ich meinen Rechner neu aufgesetzt, aber er is experienced.

  Ich weiss, wie also provozieren kann ich jetzt Aber. Wenn ich beim export die Zielbitrate [Mbps:]

  Auf unter 10 stelle tritt der Fehler auf.

  =======================================================

  Hello

  I recently problems when exporting from Premiere Pro 2015.2.

  It opens a window with the following message:

  "Error in the video Preview - 'film compilation error." Unknown error. ».

  Because of this error, I restarted my computer, but he persists.

  I know now how I can cause the error. When I export the movie and put the target bit rate [Mbit / s:]

  less than 10, the error occurs.
  
  ==========================================================
  
  Windows Pro 10
  First Pro CC 2015.2
  Intel Core i7 - 4930 K CPU 3, 40GHz
  32 GB of RAM (checked with MemTest, no error)
  NVIDIA GeForce GTX 780 (game ready Driver, Version 368.39)

  With the 2015.3 version, the problems seem to have disappeared.

• The system has encountered an error during the interview of the application. If the error persists, contact the system administrator

  Hi all

  We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.

  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  
  

  Then I checked all the services, they are running.

  
  

  Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095

  logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr

  PRINTER = noprint

  mailto = applmgr

  Restart = N

  diag = N

  sleep = 30

  PMON = 4

  quesiz = 1

  Reviver is ENABLED

  CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.

  Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -

  Shut down the internal concurrent Manager: April 2, 2014 14:21:59

  List of errors encountered:

  .............................................................................

  _ 1 _

  Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE

  error 1403 in get_responsibility_data

  Cause: get_responsibility_data

  has failed because of the ORA-01403: no data found.

  The SQL statement being executed at the time of the error was: and

  a exe

  .............................................................................

  APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.

  List of errors encountered:

  .............................................................................

  _ 1 _

  Routine AFPCAL has received the code of failure while running or analysis of your

  simultaneous program CPMGR

  Examine your log file of concurrent application for more information.

  Make sure that you pass arguments in the correct format.

  .............................................................................

  The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.

  I need your help. Please suggest me.

  Thank you

  Prabhakar

  Hi all

  Thank you for your support. I solved the problem. Find the info below.

  ===================================================================================================

  Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:

  Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)

  After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)

  Once the name of the node is changed he started creating problem in starting the application services.

  One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.

  Solution: I followed these steps.

  (1) stop all services on the LAYERS of the DB and APP

  (2) change the new contextfile permission if not 755 and the .env at the level of the source DB

  (3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

  (4) change the name from old host to the new host name, so find in contextfile.

  (5) start listener, then the database

  (6) listener status, it must must give service to the db instance

  (7) perform autoconfig with new contextfile (DB Tier)

  (8) perform autoconfig (pane APP)

  (9) start all services

  ======================================================================================================

  It works for me, and now the application is running. I hope that it will also work for others.

  Thank you

  Prabhakar

• Photoshop does not use the value amount of ram. Stuck at 6 GB

  Hey guys, recently started having issues with photoshop do not receive the fixed amount of ram needed. I have it set to use 24 GB of Ram (I have 32 GB) tried a reset, tried to reset back to the factory, then put it back, nothing. The strange thing is that if I put it to use only 1 GB of ram, it is still idling to 6 GB. Advice on how to approach this would be greatly appreciated I during the execution of projects that require a lot of attention.

  Thank you.

  Mac or Win?

  If you give complete and detailed information on your configuration and the matter in dispute, such as your platform (Mac or Win), exact versions of your operating system, Photoshop and bridge, specification of the machine, what troubleshooting steps you have taken so far, what you receive error messages if problems with opening files raw as the exact camera brand and model that generated the , etc, someone may be able to help.

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• 35.0 Firefox is report the SSLV3 security on site errors not using SSLV3 when you will fix it

  I was in the middle of a transaction on chaseonline when firefox me hunting and showed a page about the SSLV3 security issues. When I started this morning the version of firefox has been 34.0.5 after what is is that the version of firefox was 35.0. I did the test of SSL site and that the site does not use the Protocol SSLv3, see the link below:

  https://www.ssllabs.com/ssltest/analyze.html?d=chaseonline.Chase.com

  I've been using version 34 and more for some time and did not have problems accessing chaseonline website, until the 35 version has been installed.

  I haven't restarted the browser since it happened, but my guess is that the problem will continue. When this will look?

  Thanks for the quick response.

  The site wasn't trying to redirect, I was typing in e-mail secure at the time.

  I tried several times to reconnect to my account and only got the page generic message about firefox is not able to access the site due to problems with SSLv3 safely. During this time I never exceeded this point trying to connect to the site.

  Meanwhile, I realize now that the browser was stuck between versions (34.0.5 and 35). Although I still don't know why 34.0.5 through this error when I used it for a long time I was able to resolve the problem by closing and restarting my browser.

  In other words, I am now able to access the site of hunting without errors.

  That is why I am rarely, if ever, to host software auto-magiquement update in the background. I'll be this switch off voltage and installation of the updates manually.

  Thanks for you comments and feedback!

  His

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000 does anyone know what this means?

  The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000

  Anyone know what this means?  Next steps?

  styner55 wrote:

  The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000

  Anyone know what this means?  Next steps?

  An error in temperature sensor associated with the component of battery on the CPU

  Your only option is to take a test 'Apple Service Diagnostics'

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Satellite L100-179 - cannot use the full amount of RAM

  Hello

  I have the laptop above and for some time have been under Windows XP with the RAM, he came with, I have now bought 2 sticks of 1 GB, after checking the max RAM allowed, the problem is that when I install Windows reports that 896 MB of RAM installed.

  Latest version of the BIOS is installed and I changed the setting MAXMEM in Windows, but still no go. These two circuits are fully operational (installed on another laptop and the right amount is shown), my question is how do repair this laptop to recognize the full amount of RAM I have installed.

  Concerning

  Hey Buddy,

  It is difficult to say something... What new bought exactly RAM modules?
  I mean, theoretically, that they are not compatible

  How much RAM will appear in the BIOS?
  Perhaps of missing memory capacity is reserved for the graphics card and internal devices.