The update of my phone!

Similar Questions

• I'm trying to update my phone.  The only list update is iOS 9.2.1.  When I try to update, it tells me that I can't because I am not connected to the internet.  How can get the update on my phone.

  I'm trying to update my phone.  The only available update is iOS 9.2.1.  When I try to upgrade, it tells me that I can't upgrade because I am is no longer connected to the internet.  How can I upgrade my phone?

  Connect to the internet.

• How to revive the update of softBricked phone stagefright

  I have a unlocked bootloader moto x XT1095 and after updating stagefright as my phone is blocked on the page "Bootloader unlocked warning."

  I can connect to the phone via fastboot. I want to give a stock image. When I run the command:

  fastboot flash partition gpt.bin

  I get the following error:

  (bootloader) Preflash validation failed

  FAILED (remote failure)

  How can I solve this problem?

  My 1095 has done exactly the same thing, after a lot of pain and suffering and lost hours, I had Flash the stock rom to 4.4.4 and then OTA upgrade up to 5.1 with the patch stagefright. Ignore the part of gpt.bin... It did not work on mine either, and the rest of the flash was very good. However, if you find out how to fix the part of TPG, which would be lovely. I want to clarify that the devs will remove your access to google reader to the stock ROM after a month or so, so if you have access, save them on your hard drive somewhere!

• Since the update to ios 9.2.1 my phone randomly stops and requires to turn the key so much power and touchid.

  I upgraded 9.2.1 last night. I woke up this morning (late) to realize that the reason why my alarm has ever blown up is because my phone turns off automatically informed during the night. I couldn't initially it come back using the button power (as usual), apparently when it does now, I have to act like I'm it restart and press the power button and the touchid button (I don't know what it's really called, but that's where I do the touchID is what I am the appellant) and hold until the phone starts to power. My battery does not drain. I listened to an audio book all day and play games on and outside and it is still 57% so it is not a battery problem. Last night after the update, I have configured to download a book and update applications (my usual ritual) and plugged in and fell asleep. Wake up, the phone is off, Chapter Book downloaded but not the applications. He just cut himself again and I had to force him to turn back.

  Does anyone else have this problem? As I have said, as my battery does not drain, I don't think it's a battery problem. ..

  Also, I have an iPhone of 64 regular G 6. Nothing broken top and remains in a Pelican case.

  I have exactly the same problem with the same exact phone. Not only my phone, but my wife phone ' e as well. I have 2 iPhone regular 6 64 g (not more) iOS 9.2.1. Stop randomly no matter what percentage. I saw he stopped as high as 87% on my phone and my wifes phone does the same thing. It always seems to happen when you take a picture or a video, or if I do something that maybe is the intensive process and don't know if the picture/video is intensive process but happened when using other apps as well. It cannot be by chance that my wife and I have updated around the same time. Didn't he remained 9.1 no problem there. I also think it has something to do with the update of your phone OTA (over-the-air) possibly a corruption that do. I had back luck with OTA only. Whenever something goes wrong, it seems that the solution to is updated via itunes. My mother also has the same exact phone 9.1 without reported problems. Apple keeps you guys kill us here! Currently I'm going to do what follows I have had success with this process in the past when my wife is having problems with her phone battery losing battery too fast and this is the only procedure that it is resolved:

  -Backup my phone and my wife through iTunes and iCloud

  -Put my phone in DFU mode and restore to factory via itunes.

  -Setting up the phone as a new iphone and restore thanks to iCloud backup (in the past I restored from backup itunes but its past battery problem persisted through icloud backup restoration it is resolved)

  I'll post my results and see if this fixes my problems.

• BlackBerry smartphones HELP! my phone died during the update process

  in the middle of the update process, my phone shuts down completely! He did not complete the update... the red light blinks away like crazy, and the worst thing is my computer can't identify my bb bold more.

  I tried everything like linking agin and restart the process of updating... I don't know what to do... I can't even start up my phone.

  Please helpp me!

  Hai Good Day.

  Here's a solution that hope can help you upward.

  (1) connect devices

  (2) Goto my computer--> C drive-> program-> common file file-> Research In Motion.

  (3) Goto AppLoader-> click on the Loader.

  (4) Minwhile click charger: press enter together.

  5) try for some time.

  (6) don't try to redo the step still no work, but with on the dough.

  * must already set up the device manage and with firmware

  happy train

• For the update for user in OIM11g

  Hello...
  
  To update a field (email ID) of a user learned about the following steps.
  1. change email IOM profile identification and save the user form
  2 IOM then checks compared to Lookup.USR_PROCESS_TRIGGERS searching for a task name that is mapped to the Email field - typically "change Email".
  3. Add a task in the name of the process of the supply of the system target like "change Email".
  4. now write code using the IOM API that will update the Email field of the target form system configuration process with the new Email ID.
  5. connect this adapter in change Email' task.
  6. then when the form of courses is updated that triggers a process task to update the Email for that given resources - "E-mail update"
  
  May I know what APIs are to be used for step 4 so that the update can take place of IOM form of process for the target system.
  
  Thank you.

  Amruta Agarwal wrote:
  Hello...

  To update a field (email ID) of a user learned about the following steps.
  1. change email IOM profile identification and save the user form
  2 IOM then checks compared to Lookup.USR_PROCESS_TRIGGERS searching for a task name that is mapped to the Email field - typically "change Email".
  3. Add a task in the name of the process of the supply of the system target like "change Email".
  4. now write code using the IOM API that will update the Email field of the target form system configuration process with the new Email ID.
  5. connect this adapter in change Email' task.
  6. then when the form of courses is updated that triggers a process task to update the Email for that given resources - "E-mail update"

  May I know what APIs are to be used for step 4 so that the update can take place of IOM form of process for the target system.

  Thank you.

  Just copy adapter that reads the user profile data and the copy to treat the form field.
  Not for Oracle:

  (1) assume a created a UDF: UDF USR_UDF_BUS_PHONE phone number called 'Phone number' form field users user defined in the Console Design

  (2) then double-click "Définition Lookup" under the tree of the Administration Console Design and query that this code "Lookup.USR_PROCESS_TRIGGERS".

  (3) add "Information of Code Lookup" like that.

  (i) enter the UDF column, created in step 1 for Code key as USR_UDF_BUS_PHONE
  (II) enter the word "Change" without the quotes, followed by the name of the field in the column UDF created in the column of Decode. So in this case decoding is "Change phone number" without the quotes
  (III) language: en
  (IV) country: U.S.

  (4) then create a task in process of type adapter
  (i) move to the tab list of Variable and create a variable 'var1' resolve at run time.
  task logic II) Add-> DEFINE the VARIABLE and click on continue
  (III) in the Add Set parameter Variable of the task dialog box, select return value of adapter in the drop-down variable name, Type of the operand as a Variable, the qualifier operand-> 'var1' created in 4i).

  (5) add a process task under the definition of process of the resource object in Design Console called "Change phone number" without the quotes. Note: The name of the task must be
  exactly even decode the value in the choice list definitions and then make it conditional and also check "allow multiple Instances".

  ((6) in the tab 'Integration' of the task add the adapter, you created in 4) then map it on the variables of the adapter.
  (i) card adapter return Variable to process the data, and then select the form field in process (example: UD_ADUSER_PHONE) that you want to update with field of Business USR_UDF_BUS_PHONE of the user's phone.
  (II) then map the other variable of the adapter to the definition of the user-> field of Business USR_UDF_BUS_PHONE of the user's phone card.

  Result: Now when business phone is updated, business phone user change will trigger in and inserted to this resource and copy the profile to your process change. If the connector already has the task of process 'Affairs updated phone' in the definition of process that has an adapter to update the target and then due to the update to business phone in the form of process, the 'Business phone day' task will be triggered and target will also be updated with the new change.

  HTH,
  BB

  Published by: bbagaria on Sep 5, 2011 10:44

• Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

  Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

  Hello

  Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

  Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

  

  21:34 on Friday. 7 October 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• My update is my phone keep cycling through the settings of update iCloud

  My update is my phone keep cycling through the settings of update iCloud

  What should I do

  Try disabling the Contacts under settings > iCloud. When you are asked if you want to keep them on your phone, select "keep". Tomorrow or Saturday, rallumer turn it back on again, select "Merge" and see if the problem is resolved.

  See you soon,.

  GB

• My phone is locked and needs iTunes to restore it.  I think so?  But I don't want to update.  How to bypass the update.

  My phone is locked and needs iTunes to restore it.  I think so?  But I don't want to update.  How to bypass the update.

  Is it blocked because of the wrong password?

  If Yes: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say that because I changed my IPhone in a Bar in engineering (Brazil) 6, precisely because of this problem an

  My IPhone 6s did the update of battery charge you change the time manually or time zone. I wonder if the problem is in the IOS or mobile phone? I say this because I have changed my 6 IPhone in a Bar of genius (Brazil), precisely because of this problem, and the new cell has exactly the same problem

  This is a known, problem if the time is not set correctly.

  us-not-displaying-accurate-battery-data http://AppleInsider.com/articles/16/01/16/Apple-promises-Fix-for-iPhone-6S-6S-pl

• Phone stuck in recovery mode after reboot during the update

  I tried to update to iOS 9.2 when I leave my phone in my room and went to get some breakfast. When I came back the phone seems to have already completed the update, but when I try to turn it on it goes into recovery and invited to connect to iTunes mode. When I connected to my computer iTunes doesn't detect all recovery devices, and it's the same thing when I put the phone in DFU mode.

  So far, I have tried to reset my computer, my phone, tried the mode of recovery, DFU mode, reinstalling the drivers Apple but none seems to work, and to this day iTunes on my computer and my father did not detect my phone when it is connected.

  Any other suggestions on how to fix this?

  You may have a hardware failure. Make an appointment at the Genius Bar Apple Store nearest you to have rated unit.

• CLIQ: Motoblur: unable to delete accounts of events or check the updates on phone

  I just went through a password reset with my Motoblur account online. Now when I try to check the updates system I get the message "the attempt to upgrade has encountered an error because of the failure, connect". I am also unable to delete accounts of Happenings so that I can configure them again to reactivate the Happenings. It seems impossible to get the password for my Motoblur account on the phone.

  
  

• We received a phone call saying that Microsoft could not send us updates. Is this a legitimate call and you can do the updates direcetly online?

  We received several calls saying updates could not be performed on our computer.  We were warned that the computer may crash.  They asked us to turn on our computer and they would try to make updates in this way.  I have a question the legitimacy of the request and how they got to our phone number.  Please respond by email and tell me it is OK.  In addition, the appellant also had a strong accent, it was very difficult to even understand.  Thank you for your response.

  Scam!

  I received a phone call from someone who claims to have a Virus
  http://answers.Microsoft.com/thread/4489f388-d6de-416d-9158-0079764bb001
  (10 Aug-09 &ff; 44 pages/88 posts from 27 Jan-12)

  Avoid scams phone & other support Tech Cyber scams
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Avoid scams that use the Microsoft name fraudulently [phone & email]
  http://www.Microsoft.com/security/online-privacy/msName.aspx

• The ICS update failed. Phone cannot turn on.

  Hi, I tried to update my phone software through the update of Sony Service last night. Let him download & when I wake up, EXTRA said failure to update & now my Xperia P cannot be turned on. All solutions? Any attempt to connect the phone via PC failed, he can see a red light indicates which means power exists, but the PC can't detect the phone.

  you need to charge your phone, connect it to a charge of wall for an hour and try again

  Don't forget to mark the correct answers & useful answers

  Another issue, if you have time please check this thread

  http://talk.sonymobile.com/thread/44888

• Z10 blackBerry I want to put up-to-date OS 10.3.1 OFF my Z10 phone. Desktop factory reset just reinstall the update?

  Somehow I woke to this update on my phone. IM NOT happy. My phone does not work now. I can't shout. I can't text. For not to mention the battery now drains in 4 hours and get hot super fast. I never had any of these problems before. My battery until yesterday lasted while using the day /. All THE features on my phone worked.

  This new update is * beep *. There was nothing wrong with the previous version. I want this back and cannot get it.

  Suggestions before you throw this phone and buy a Samsung?

  BLACKBERRY - YOU BETTER BE LISTENING FOR YOU CUSTOMERS. I SEE MANY HERE ARE NOT SATISFIED WITH THE SO-CALLED IMPROVEMENT.

  YOU ARE TO LOSE YOUR MARKET.

  SMARTEN UPWARD!

  OK... see:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...