the update of the firmware on compaq 510?

Similar Questions

• How to enable the WLAN of Compaq 510 in Windows 7 Starter?

  Hi, since I was on the dial-up connection and turn off my WIFI connection, I don't know how to turn on my WIFI, when I click on the switch for WLAN, bluetooth on and it also shut down, I don't know how to activate it, please I need your help, as soon as possible.

  Hi Justin,

  Thanks for posting your query in Microsoft Community.

  I suggest to check the Autoconfiguration WLAN service and set it toAutomatic and check if the problem persists.

  a. click the Start button.

  b. type services.msc in the search box and press on enter.

  c. Locate the autoconfiguration WLAN Service and check if it set to Automatic & not automatic delayed.

  If you are still facing the same problem, then turn on tracing for a local wireless network when you start a Windows Vista-based computer.

  To enable tracing for a WLAN in Windows 7, follow these steps:

  a. click on start to reduce this includes this image and then type cmd in the box start the search .

  b. right click on cmd in the programs list and then click run as administrator.

  The collapse of this includes this imagIf you are prompted to confirm that you want to continue, click continue.

  c. type the following line at the command prompt and press ENTER:

  netsh wlan set tra persistent

  The monitoring starts immediately and is persistent. When you restart the computer, the tracking begins shortly after the start of the WLAN auto configuration service. Existing monitoring log files are overwritten.

  Note: To stop the follow-up after you activate it, use the following command:

  Netsh wlan set tra no

  For more information, please see: How to enable tracing for a LAN wireless in Windows (for Windows 7)

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• An error occurred during the update the firmware.

  Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

  Thank you in advance for your help! ... soon a

  If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7

  After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.

  It was the update of the firmware with certainty that has made this... no doubt about it:

  • My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
  • Before the update, everything is OK
  • After updating, my mouse mouse start jittering
  • < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz

  Restart to e TM Mo doesn't change anything.

  In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.

  Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:

  • Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
  • However, this is not the best solution... I don't want 2 SSID.

  It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.

  I also had bad experiences with OS updates lately and postpone the as much as possible.

  The problem is that I can't go back... or can I?

  Any help is welcome.

  THX

  The problem is that I can't go back... or can I?

  Of course, you can, but it may or may not help.

  Open AirPort Utility

  Click on the image of the AirPort base station

  Hold down the option key on your Mac while you click on the version number of the firmware

  A drop down menu appears

  Choose the version of the firmware you want to use

• The update of the firmware bricked just my time capsule.

  I followed the prompt to update the firmware today and I got a 'did not finish' message type. (I don't remember what it was because I just clicked on past)

  'The airport' (which is my Time Capsule) is now Undiscoverable. I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  Now, I'm stuck in a dystopian nightmare of the 1980s with all the promises of technology and yet none of its features.

  Help!  (I write from my phone. A device that I've recovered from the future)

  I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  If you Hard Reset the TC, it is normal that AirPort Utility cannot find the TC... given that AirPort utility displays only devices of the airport that have already been configured.  The TC is not configured, so it's a Station of Base AirPort "nine" with the default settings.

  Start over and set up the TC to help "Assistant" Installation of Apple on your Mac or your iPhone / iPad.  After the back if you need some advice on this.

• An error occurred during the update the firmware. -16

  I tried to update the firmware, after restarting Airport Extreme. But the Airport utility shows that an error occurred during the update the firmware. -16

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I had to restore the factory settings by using Utility button and physics of the airport, but it has not solved the problem.

  I'm not sure what is the problem...

  Your airport is now not working? That is, the reset did not work.

  OR

  It doesn't have to be upgraded after several attempts?

  The airport is connected to the network as usual? You have full internet access through the airport?

  What model is the most convenient airport?

  The real model number could be a help. A1xxx of the base except the newest one... Suffice to say a grand.

  What is the current firmware?

  If it is a very old model, they can sometimes give wrong if it has never been updated.

• How can I update the firmwar in the tv 48T5445DG?

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T544DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder update by Sam currend?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Hallo,
  According to Overview_direct_updates_for_end_customers_worev.pd f, I downloaded yesterday, the latest firmware for my Toshiba 48T5445DG is Version 3.6.3c.
  By TV now has:
  Softwareaktualisierung V.3.6.0.b
  SoftwareVersion V.3.3.6k
  I tried pressing the button OK on Softwareaktualiserung, but he told me, that software is up-to-date.
  It does not try to update on the Astra satellite.
  I also tried on the portal page, but did not find any option to update the firmware.

  So my questions:
  s ' Please explain step by step on how to upgrade the firmware
  -What are the parameters of sat/transponder currend update satellite (Astra / Hotbird)?
  -would be even better, if the update would be possible by download and USB
  -It would also be good to know what has been fixed.

  Main reason for me to update the firmware, is that the remote control react also on order remotely from other devices. For example, sat-receiver and amplifier. Here are other manufacturers. Thince each manufacturer shall forward its own specific code, it seems to be a bug in the TV. (Regardless of manufacturer - a part of the signal of the remote control code). I hope that this could have been fixed.

  Thanks for your help

• Problem with updating the firmware on 40TL838G

  Hello

  I am very happy owner of Toshiba 40TL838 screen (G).
  Recently, I tried to update the firmware on it.
  Next steps in the user manual I tried to do the update of the network. "No new updates available" poped upward. I goggled solutions and came across a manual update of the USB.

  I downloaded the firmware recent Telefilm, coppied to usb (4 GB, formatted FAT32).
  Following the online instructions I have unplluged TV power.
  Plugged in USB. Connected TV to the power and he lit. And nothing happened.

  After 20-30 sec info abut being plugged usb pop uped question I wish to put on the Media Player.

  Firmware: 6.1.0M.1
  MBoot: 00480288
  MFC: 240226

  Any ideas how to proceed with this case.

  Concerning
  SLim

  Hello

  The firmware can be downloaded and updated via the network.
  But as far as I know you need to change the drive media or software update settings can not be started.
  Media Player-> USB media player-> installation
  Then press left or right, and select THE
  Now we turn on the TV
  Insert the USB key containing the firmware and after inserting the USB firmware update information appears on the screen.
  Then choose YES

• Update the firmware, Toshiba TL 838

  I have problems with my TL838, I heard you can update the Firmware and this has solved some of the problems. Where can I find these updates?

  > I have problems with my TL838.

  What problems do you exactly with the LED Toshiba TL838 TV?

• Satellite Pro A200 error (PSAE4E) during the firmware update Disc Creator

  Hello

  I get the following errors when you try to update firmware for Disc Creator I use Windows VIsta Home Premium.

  An unexpected error has occurred.
  Error code: 32007C-26-00000015

  Followed by:
  Error code: 320129-26-00000015 - then application goes down.

  All solutions to this
  Thank you

  Hi guys

  I'm a bit confused of m.

  > when you try to update firmware for Disc Creator
  Where did you get the firmware update for Toshiba Disc Creator?

  I checked the page European driver Toshiba and Satellite Pro A200 (PSAE4E) download area and, unfortunately, I didn t find updates for Toshiba Disc Creator.

  So I really wonder about this problem. He s strange

• Photosmart 5524: MGP1CN1610AR update the Firmware on HP PhotoSmart 5524 on September 14, 2016 broke wireless printing

  I have a question which I believe is related to the MGP1CN1610AR firmware update that was released on September 14, 2016 and auto installed on my HP Photosmart 5524.  Since the update I can print is no longer my laptop Windows 10, or my iPhone with iOS 10.  I can, however, send an e-mail to my HPEPrint account and this shows with success - which proves that the printer is connected to the internet and WiFi.

  My network is provided by my BT HomeHub 5 with BT infinity.  The status of router, the printer displays intermittently as connected then disconnected.  This is since the update of the firmware.

  Is it possible to restore the firmware on the printer? OR is there a known solution to get my WiFi printing works again.

  Hi RTD_HPUser,

  Thank you for your answer!

  I'm glad you found a solution that worked for you. About the firmware, as long as the Web service is enabled, you can select the icon Web Services, settings, and then select printer Update, then the update is automatic, and turns off. This will prevent the firmware update on the printer.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that answers your question!

• Update the Firmware of Calc for the first HP gives first HP V13 recovery mode.

  I tried the firmware update procedure prescribed using the latest updates to 2015.   Calculator is V13.  Windows 7.  When from the firmware update the calculator immediately shows the first HP V13 recovery mode. and then nothing happens to the progress bar.   I tried the reset and tried several times, same thing.  Before the attempt of firmware, I am capable of a screenshot so connectivity exists but firmware update fails every time.  Any ideas or suggestions?

  Please do not follow the previous answer. It will make you lose your data on the calculator and probably not anything.

  ===================================

  You are connected to a USB 3.0 port? If so, it is probably the cause of the problem. This problem has been solved, but would require the calculator to run the latest version.

  Basically, the problem is more likely when the calculator "toggle" in the normal mode in mode 'updater '. Recently, with ports USB, windows stopped to reload the usb driver in mode "updater" on some systems.

  A simple thing you can try is this:

  1. try your method of update.

  2. once it is in the form "updtate" - go ahead and disconnect the calculator.

  3. close the connkit leave the calculator in update mode.

  4. now connect the calcualtor to a DIFFERENT usb port.

  5. Windows will probably appear a driver installion thing or detects the device, or something similar. It's what you want.

  6. once everything has stopped, rerun the connectivity kit. After a few seconds, you will be asked if you want to update. Click Yes and if all goes well it will run well this time.

  If you continue to have problems, try the continuation of this support document. If you continue to have a problem, post it here and we will try to get by.

  http://support.HP.com/us-en/product/HP-Prime-graphing-calculator/7298643/model/7298644/document/c04674521/

• Update the firmware to distance Apple TV4

  My volume control on Samsung sound bar does not work.   I upgraded tvOS 9.2 but the remote will never update new firmware 245.   I did the update on Monday.

  I then restored by default yesterday and not always no chance.

  Any ideas?

  http://www.idownloadblog.com/2016/03/01/how-to-update-Siri-remote-firmware/

• Tecra A10 - 1GW (PTSB1E) - update of the firmware & chipset failed

  Hello!

  in fact, I have two problems on my laptop (32-bit) windows 7:

  Burning programs do not find my burner (called 'MAT * a DVD-RAM UJ880AS' Device Manager) and even the [update of the firmware | http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 5 & selSeries = 155 & selProduct = 809 & langua ge = 17 & selOS = 29 & selType = 50 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 12 & 1 7 = selectedLanguage & type = 50 & page = 1 & FROM = windows7 & ID = 68407 & DISO =-1 & driverLanguage = 42] cannot [find him | http://img705.imageshack.us/f/fehler2.png/]. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  Internal burning function Windows works _sometimes_ and disc playback as usual.

  Chipset driver updat doesn't work.
  The [error message: http://img827.imageshack.us/f/fehler1.png/] said 'requirements for the installation of this software is not met. the installation program is abandoned.
  I don't know, I chose the right driver.

  All attempts have been made under administrator rights and disabled antivirus.

  Thanks for help
  Tablerocker

  p.s.: the windows shortcut (just the shortcut!) + e works, too ([unknown error | http://img137.imageshack.us/f/fehler3.png/]). but I don't think it's a problem toshiba ;-)

  > Burning-programs do not find my burner (Device Manager named him "MAT * a DVD-RAM UJ880AS") and even the firmware does not find it. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  What is the status of the STRANGE in Device Manager?
  Are there any yellow exclamation marks?

  I recommend you remove/clear the STRANGE since the Device Manager.
  Then start the registry and delete the upper and lower registry key filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device. Windows should recognize the STRANGE again.

  Regarding the driver chipset;
  The A10 - 1GW supports the Chipset mobile Intel GM45 Express.
  http://www.Intel.com/products/Notebook/chipsets/GM45/GM45-overview.htm

  If you use the driver from the Intel page, then you should try installing the chipset in Device Manager. This allows to force Windows choose the driver Intel