The upgrade of the storage Appasure drives

Similar Questions

• Why my windows 7 installed on drive hard Seagate IDE goes into blue upon awakening from sleep screen while everything goes well when I installed it on the SATA hard drive.

  I did a Chkdsk/f/r hard disk and no errors not found. Is it because of the incompatibility of your IDE hard drive with windows 7 or other?

  Hi Auggy,

  I could not roll back the driver for GIGABYTE GBB36X controller, instead, I uninstalled the driver and now the problem seems to be resolved.

  There will be consequences if I ever install the storage controller driver and what is the use of the controller driver?

  Thanks for the comments.

• Satellite Pro M10 - the (original) display driver upgrade?

  Hello

  is it possible to upgrade my display driver on my laptop M10 with the original driver? I'm using the latest drivers nVidia Toshiba (36,48) but NVIDEA has already more recent upgrades, but it will not recognize the my graphic card and refer to the use of Toshiba drivers.

  Any way to install the original NVIDIA driver instead of the Toshiba driver?

  Thanks for the help
  Andreas

  Hello Andreas

  I put really don't know if it is possible to install the original NVIDIA driver but it is recommended to use the driver provided by Toshiba. The reason is very simple. This kind of restriction is done to save the cell damage equipment. As you know the cooling of the hardware components is not so easy and.

  Because of this, he cannot allow that this graphics card works with maximum power. In this case, it produces a lot of heat and it may happen that the card may be damaged or the laptop turns off due to overheating. If there is a message that the card is not there it's just a mechanism of protection, and there is no way that the hardware may be damaged. Believe me the repair costs are very high.

  Good luck!

• Icloud takes the storage drive?

  Icloud takes the storage drive?

  Yes.

• Satellite P10: Question about the limits of upgrade of RAM and HARD drive

  What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

  RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

  Hello

  In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

  I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
  In my opinion the BIOS does not recognize the larger HARD drive.

• HP ProBook 470 G3: upgrade memory and storage in the HP ProBook 470 G3 17.3 "

  Hello

  I would like to buy HP ProBook 470 G3 17.3 "after reading the review of this laptop in Notebookcheck.net site,

  The laptop has a large 17.3 display, I think in ZBook but is too expensive so I need Quadro GPU or CPU high range this ProBook G3 17.3 "is the best choice as I thought... by the way

  My question on the model with the product number: T6D90UT

  CPU: Intel® Core™ i7-6500U with Intel HD Graphics 520 (2.5 GHz, up to 3.1 GHz with Intel Turbo Boost Technology, 4 MB cache, 2 hearts)

  RAM: 8 GB of SDRAM DDR3-1600 (1 x 8 GB)

  Internal drive: 1 TB 5400 RPM SATA

  Display: 17.3 '' diagonal backlit flat antireflection FHD LED (1920 x 1080)

  GPU: AMD Radeon R7 M340 - 2048 MB, Core: 1021 MHz, memory: 1000 MHz, DDR3, 64 bit interface

  Website of notebookcheck and HP site says the laptop has DDR3-1600

  http://www.notebookcheck.NET/HP-ProBook-470-G3-core-I7-6500U-Radeon-R7-M340-notebook-review.155142.0...

  http://store.HP.com/us/en/PDP/laptops/HP-ProBook-470-G3-notebook-PC-%28energy-star%29-t6d90ut-ABA#SP...

  While the HP parts store said that the portable DDR3L?

  Memory module 8 GB 1600 MHz, DIMM DDR3L PC3L-12800 (SHARED)

  Reference number: 693374-001

  Visit this link please

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=709EC0F980AD4FC3A887C0C5C3DB5C46&SearchIn=P...

  It's great so far but what make me confuse is the price of RAM, there are two parties with the same name, the two net price is $209.00 (it's too expensive there technical error or what)

  I can buy 16G. B (8 x 2) Kit from Newegg in the 57 to 100 such as price range below

  CORSAIR Vengeance Performance 16 GB (2 x 8G) 204-pin DDR3 SO-DIMM DDR3L 1600 (PC3L 12800) laptop computer memo...

  Priced at $ 69.99

  Case latency: 9

  Time: 9-9-9-24

  Voltage: 1.35v

  Multi-channel Kit: Dual Channel Kit

  Model #: CMSX16GX3M2B1600C9

  Item #: N82E16820233587

  But I say that if I could, but the same part in HP it will be better for the stability and the use of long date because the series HP's ProBook made with too many test and the part use inside, he is selected to make the laptop to run higher stability.

  If the price is right and it's expensive so can I but the corsair with latency case kit Timing: 9-9-9-24 and tension: 1.35v, is also the RAM inside the laptop DDR3L with voltage: 1.35v

  Another question if I want to use the SSD for the system slot m2 inside the laptop only used there not I think to buy

  SSD Samsung 950 PRO - Series 256 GB PCIe NVMe - M.2 SSD internal 2 inches MZ-V5P256BW

  and as a primary partition for the windows system and the 1 TB drive will be secondary disk for my files is that fine or the laptop works with some LAGS and slow.

  Here is the Service Manual:

  Manual

  It has doors on the bottom so is very easy to upgrade. It takes DDR3L-1600 low voltage (1.35) up to 2 x 8 modules for total 16 concerts. It is the specified memory:

  8 GB (PC3L-12800 1600 MHz, DDR3L) 670034-001

  It has a slot of the WSSD m2 using modules with this form factor:

  

  If you need assistance more let us know.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Compaq Desktop Mod CQ511OF: W7, using the upgrade on the new hard drive disc

  Hello everyone; The 5 years, 320 GB hard drive on my HP Compaq CQ5110F desktop model is tired and I would like to replace it with a hybrid drive SSD Seagate 1 TB. My concern is that this computer has been upgraded from Vista to Windows 7. The vignette, I placed on this computer that came with the disc to upgrade the readings; "Windows Vista HmPm - Win 7 HmPm UPG fill HP".  So my question is can I use the drive of W7 upgrade to install W7 on the new 1 TB hard drive, the 'system' will use the product code located on the sticker provided with the upgrade disk? The computer is supported up to 1 TB Seagate Backup Plus.  The computer is, bicoeur AMD 2.5 GHZ, 32 bit, 3 GB of ram. I would be happy to provide additional information. I appreciate all the comments really. Thank you very much for your help, Oscarmint

  You cannot use an upgrade disc to install an OS on a new hard drive.

  You could clone the old hard drive to the new hard drive using a program like Macrium reflect free

  http://www.Macrium.com/reflectfree.aspx

• Pavilion WA782UA #ABA: need help for the Intel Rapid Storage Technology driver

  Hello

  I have recently reinstalled Windows 7 after putting in a new drive hard 1Terabyte. I then had problems with Windows Update, and just my overall use of my laptop has been slower. After reading on other forums with people who got similar error messages from Windows update told me to update my driver Intel Rapid Storage Technology. (Link forum here)

  However when I visit my list of drivers on the HP site, I find not the Intel RST driver to update. Can someone direct me to the Intel RST driver that corresponds to my laptop?

  Laptop HP Pavilion dv6 - 2173cl

  Hello:

  You must use this version... you want the 3rd file listed on the left.

  https://Downloadcenter.Intel.com/download/23496/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  Do not click on the most recent version of the driver is available because it is too recent for the chipset has your PC.

• The upgrade on Pavilion 9667ea hard drive to SSD

  I think the upgrade my computer laptop 9667ea Pavilion by replacing the first hard drive of 160 GB with an SSD, as the Cruicial M500 240 GB SATA 111, or similar.

  Could you tell me if there are problems in doing this, because I see no other posted messages it may be according to the model of your laptop?

  I advanced and bought the SSD (Samsung 840 EVO 250 GB), which has been installed on the HP Pavilion dv9667ea. Everything went well and I used the Samsung software cloning with the SSD drive (I backed up the C drive beforehand). I have power and data cables, so I need just the package base. The new 250 GB SSD drive replaces the original 160 GB hard drive, I decided to take out the other drive so hard 160 GB. The laptop is much faster at startup and is also faster by using the programs on the laptop. As there are now no hard drives on the laptop, there is now virtually no fan noise, which was inconvenient.

  Thank you for your advice.

• need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

  need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any

  Hello

  You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

  Reference:
  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/308422
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/320820
  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340

• Digital West of the mass storage device driver download

  After I joined my hardrive western digital, my computer tried to add material to the system but the system could not add to cause corrupt driver. I talked to a Western Digital technical support and was told to the mass storage device driver MS Wimdow. Where can I get this driver or how can I solve my problem?

  Hello

  1. did you of recent changes to the system before the show?

  2. What is the model of the drive?

  3A this works much earlier?

  4. what happens when you try to connect to the device?

  5. do you get an error message?

  6. have you checked if the device is detected on another system?

  Method 1:

  Follow the link below, run the fix it tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Follow the link below and update the drivers for the external hard drive.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps.

• How do I take a VISTA system which has a drive with a C and D partition and combne in C only a partition with the storage of which was C and D?

  How do I take a VISTA system which has a drive with a C and D partition and combne in C only a partition with the storage of which was C and D?

  Hello

  Make sure that D: is not the partition recovery including the manufacturer put there to make the recovery disks from and eventually to return your computer to how you bought

  You cannot combine C: and D: and their data using the Vista Disk Manager

  with Vista, you will need to save the data on D: - D: delete - and then extend C: into the now unallocated space where D: was to do a 1 partition 2

  read the tutorial below

  How to remove and extend a Partition with Vista disk management

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

• Vista does not recognize the mass storage controller driver

  How can I get microsoft to recognize their own software and files show as my controller driver of mass in diagnostic checks and updates storage?

  * original title - BUG not installed mass storage controller driver *.

  I don't really understand your question. The mass storage controller driver is available from the website of your computer mftr. (if you have a machine of brand OEM like HP, Dell, etc.) and is included in the card mother/chipset drivers OR you would get the driver from site of the card mother mftr. If you have a generic construction machine. You don't want to update these drivers from Microsoft Windows Update in all cases. If you installed Windows 7 and that you have not installed these drivers, this is your next step.

  General information on the drivers:

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  MS - MVP - Elephant Boy computers - don't panic!

• Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

  Original title: bitllocker Windows 7 issue

  Hello

  I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

  Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

  I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

  Hello

  Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

  You can read the articles and check:

  What is the difference between BitLocker Drive encryption and EFS file system?

  Protect your files using BitLocker Drive encryption

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• storage system on the external hard drive recovery?

  storage system on the external hard drive recovery?

  When you request support, please provide the name number and produces complete model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  You do not save the HP system on an external hard drive recovery. You must create your recovery media personal HP for recovery works. HP Recovery can be created using DVD + R discs or a 32 GB USB Flash drive. Please see create recovery discs or record a recovery Image on a Flash USB (Windows 8) drive or create recovery discs or record a recovery Image on a Flash drive (Windows 7) for instructions on creaing your HP recovery media.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation