The upgrade to 8.54 tools user interface fluid of hcm 9.2 8.53.03

Similar Questions

• I have the new apple TV, and he had the new user interface.  Friday he returned to the old version of apple TV user interface.  Anyone know why this could have happened

  This is a silly question, but I'm not too tech savvy.  I don't know I have changed something somewhere.  I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research.  This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return?  I did a reset to the original values Apple TV and it did not work.  The tvOS is 9.1 (13U85).

  Try to understand the issue.

  Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3?  You can attach a screenshot?

  I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...

• Event generation of click for the Run button programmatically in LabVIEW User Interface

  Hello

  I use the user interface of LabVIEW Simple (Simple OI - VI.vi first level) for my application teststand with small changes. Here, I don't want to click the button run every time. Generate the click event of the Run button (which tringgers the TS gear) by programming the interfacr VI user or is there a method for tringger TS gear?

  More information:

  LabVIEW worm: LabVIEW 2010

  TestStand worm: TestStand 2010 SP1

  My sequence Run point enry's 'Test DUT'

  Thank you

  Alaka

  Hi Adarsh,

  There's a DoClick method for the TS user interface buttons! Just wire the ref button to invoke node and locate the DoClick method.

  Kind regards

• Control the layout in a dynamic graphical user interface

  I have a main panel using BorderLayout with two sub-panels, a control panel to the North, and a billboard in the centre. The control panel contains a set of controls, and this set of orders grows and shrinks dynamically when the user interacts with the application.
  
  I have this stated control panel using FlowLayout. My problem is that when the set of controls is too long to fit on one line, the next control to add never appears, because the Panel does not grow to two lines. I like control panel to develop at the expense of the main display panel in the Center (and shrink again when controls are removed so that the rest fit again in one line).
  
  Essentially, the behavior I want is analogous to how JTabbedPane: it adds and removes tabs in a JTabbedPane, the tab region shrinks and grows dynamically.
  
  Of course, there is an extra step that I have to run every time that I add or remove a control, to force the various layout managers to do their work. I tried various combininations to invalidate and revalidation of the Control Panel, the main panel and so on, but I have nothing seems to have the desired effect.
  
  Thanks for your suggestions.

  The code that I provided was really useful? So, what is your final solution? I'm sure that others in the forum would like to see your solution.

  If the answer to the question marks, he said. You don't want to ask another question and that people trying to answer.

• Paste as quote non-functional with the upgrade to 38.1.0 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; RV:38.0) Gecko/20100101 Thunderbird/38.1.0

  Change the drop-down list edit and click right 'paste as quotation' = no action.
  'Paste as unformatted text' works

  Start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?

• The best way to separate the user interface in the model LV 2012 queued Message Handler?

  If you create a new "queued Message Handler" new model 2012 LV, you will see a blue box in the case of "Update view" that says the following:

  Code Recommended - If you wish to decouple the Message Handling Loop from your user interface, consider creating User Events (like the "Stop" event in this VI) to message the Event Handling Loop whenever the user interface needs updating.
  

  I would like to give a suggestion, but I am struggling to find the best way to do this and still keep code modular.  The template creates a user - Stop.lvlib "event with a create/Destroy/fire Subvi.  I would like to create a library of "User event - Update UI.lvlib" similar with similar Create/Destroy/fire Subvi keep this new modular and separate user event.  The problem, I am struck, is that there may be only two hydrants in case Structure dynamic event so, how I modularlize creating user events in separate SubVIs and always maintain this dynamic event terminals?

  As a follow-up on the issue, it would be preferable to have a library of user by indicator events that must be updated or that a single UI update of the user and then event pass a cluster as the message that contains the name of the control for the update (to use with a structure of matter), then the data to go with it?

  Thank you!

  Instead of having the events to record in the 'create' methods, you could be part outside your 'create' SubVIs and then simply bundle them. Then, you create your individual event of the user management. See excerpt where I created a vi 'Create user event - Update' in front of the stop.

  

• Citing the part of the user interface of the game without head in an app without head

  Hello

  I try to call my interface section user app without head of service class (part long term without a head), as shown below:

  application of BB::System:InvokeRequest;

  request.setTarget ("com.myDomain.myAppName");

  request.setAction ("com.myDomain.myAppName.START");

  InvokeTargetReply * response = m_invokeManager-> invoke (request);

  {if (Reply)}

  QObject::connect (response, SIGNAL (finished (()), this, SLOT (onInvokeResult ()));

  _invokeTargetReply = response;

  }

  else {}

  qDebug()< "failed="" to="" start="" invocation:="">

  }

  the error response is always "not objective". I double checked that the id of the target is my id app (user interface section) and that it is registered as target to call in the xml file bar

  
  application
  myAppName
  
  Icon.PNG
  
  myAppName
  

  I don't know why he keeps giving me the error response target?

  Made a typo, the Notification and NotificationDialog are part of the bb: platform.

  Here are their respective documents:
  Notification https://developer.blackberry.com/native/reference/cascades/bb__platform__notification.html#function-...

  NotificationDialog https://developer.blackberry.com/native/reference/cascades/bb__platform__notificationdialog.html#fun...

• Some software does not display the user interface, such as my mcafee antivirus

  For some time I have problems in some of the software running, they show any user interface when they start up. They just start and work properly but I have no display to change any thing or work on it as McAfee, hotspot shield etc thanks for the help

  My problem was that some program did not display on them.

  I solved this problem by using the mcscriptfix file
  Thanks for the reply

• is there anything that can be done to improve the appearance of the user interface?

  In applications based on the web at this point a user interface can be made to resemble anything. I was wondering how much flexibility there is in the interface user of Adobe Lightroom?  My client think the plugin that I do for him is bad in Windows. Also - I noticed things I should be able to do to affect the size of the font on the labels, etc..  have no effect. For example, size = 'mini' does not make a tiny font.

  Flexibility of the UI is indeed limited.

  That said, you can use any font on the user's computer. The trick is to know which fonts will be available on Mac and Windows (assuming that the cross-platform plugin).

  In addition, there is no way to specify a default font, to include the police everywhere specifier so you want.

  I suggested some fonts install Lr so plugins could count on a common set, but so far without success.

  Having said that, your plugin installer could install fonts, then you would be able to explicitly specify the fonts who look more beautiful for you or your client...

  Here are some examples:

  --[[        Font name:      set to named font on your machine, or one of the following:                            *                              *                             *                             *                         or, set to a table with these values:                            name = font-family-name                            size = {regular|small|mini} - or if that doesn't work, then a number.                        or, set to nil to get default font.
  
          Examples:       _t.font = nil                                      -- use default font and size.
  
                          _t.font = 'Helvetica'
  
                          _t.font = { name = "my-custom-font", size = "mini" }                        _t.font = { name = "Arial", size = 12 }--]]
  

  Rob

• Localized user interface

  Hello

  I have some problems to reload the complete dictionary (GSD file)

  with the LabWindows/CVI 'User localized Interface' tool.

  DO NOT run a multilingual, with the good translation software.

  The final executable works perfectly, with LWL file.

  BUT if I need to correct an error of translation (I'm only a man ).

  and try to reload the previously saved dictionary (GSD file) for that.

  After leaving the tool,

  many completed translations previously disappeared (see pictures attached).

  You can save the dictionary as much time you want.

  After put again and again... the same missing translation.

  Whenever you reload, after the tool 'User Interface localized',

  some translated lack again and again in the tool.

  See the attached example.

  See with 'Fonction_EN. GDL' and 'OK (enter)' message button of the Panel "in context".

  It is correcly filled in the final file of LWL, so the executable is correctly loaded.

  But it still does not save in the GDL dictonary file.

  We had the problem, since almost LabWindows/CVI 2012 (and perhap previously).

  And especially with some IUR with many panels on the inside

  and/or using the same translations (__OK, __Cancel, etc...).

  Thanks a lot for your help.

  Hello

  A solution was given by another post.

  Sorry, I lost the link.

  Thank you.

  Process:

  LabWindows / CVI-> tools-> localized user Interface...

  -File-> open User Interface (*.uir, * .tui)...

  '... \Elements.uir '.

  --> Dictionary Translation of the dictionary (*.lwd)...

  '... \Elements.lwd ' (-online form "Chains" successfully imported file dictionary)

  -File-> load location (*.lwl)...

  '... \Elements_En.lwl ' (-online 'channels successfully imported the language resource file)

  The translation are fulfilled.

  

• Oracle BI Presentation Services User Interface Customization

  Hi, I read the chapter
  Oracle BI Presentation Services User Interface Customization
  in the manual
  Oracle Business Intelligence Presentation Services Administration Guide (Version 10.1.3.2 December 2006)
  
  There's a note (copied from this manual)
  
  NOTE: In Oracle BI, customization of the UI presentation Services and appearance
  is done by changing styles and the message XML files and skins and not through the use of
  JavaScript. You should not change the JavaScript files located in the SAROOTDIR\web\app\res folder.
  where SAROOTDIR is the installation directory. This is because the objects and methods in these
  scripts can change, and because these files may be replaced during the upgrade. (In a dashboard
  users with the appropriate permissions can customize an individual dashboard section by adding
  HTML to it. This HTML can include JavaScript. For more information, read Oracle Business
  Responses of intelligence, dashboards and offer interactive user guide.)
  
  My question is:
  When there is an upgrade, will be replaced only the javascript files?
  Should I need to customize, I have modified the files in SAROOTDIR\web\app\res files? (using IIS, not OC4J)
  When there is a willingness to upgrade, image, css, replaced xml files files files?
  If the files (for customizing the User Interface) will be replaced after the upgrade, is it possible to avoid replacing?
  
  
  If there is a deployment to another machine, do I need to copy files that have changed (for the customization of the User Interface) to paste the SAROOTDIR\web\app\res
  folder? is this a correct way? or correct anyway?
  
  
  Thank you very much!

  Not really. Best practice is not to touch the original skin + style files and work with the own. In this way there is no worries when you upgrade.

• Several monitors, duplicate user interfaces

  Hey everybody,

  My application consists (as the title suggests) a computer running 4 touchscreen monitors. Three of the monitors will be completely different, but the 4th will be one combination of the other 3. The 4th is larger, so it will be good in fact whole face front of monitor 1.

  Here's a representation of what will be setup.

  The hardest part is that I need 4 monitor to act exactly like the other monitors in its respective sections. It would be nice to be able to do it without having to send my data to several places each time or code duplication. Someone of you have experience in the duplication of the user interface, or knows of a clever way to do this?

  I think I have to do is create a new interface for the 4th monitor which triggers other user interfaces and vice versa. The disadvantage is to further development on the top of the UIS, I already have, and if I change something with the first 3 UI, I have to come in and change the 4th manually. I also have to do an event overall fantasy trip LIKE THIS in order to communicate between two different screws

  Any help is appreciated.

  Thank you!

  If the VI opened on monitor 1-3 is re-entering, you can use a subgroup of experts to open a copy of it on the "master" VI If you are handy with the sub-panels you have small portions of the unique façade of several visible screws on the front of the master VI. The hard part is going to be designing a system of communication that allows screw incoming control safely the same resource without any kind of race condition.

  Search example: Create User Interfaces > General > live multiple in a Subpanel.vi

  Edit: lynn beat me to it

• Failure of logon user interface after windows update

  After a recent windows update I get the following error.

  Winlogon.exe: The application or DLL c:\WINDOWS\system32\OBDC32.dll is not a valid windows image. Please check this against your installation diskette.

  After this window I get:

  User interface failure: could not load the DLL msgina.dll of logon user interface. Contact your system administrator to replace the DLL or restore the original DLL.

  The only option at this point is to restart that puts me in a vicious circle of the same mistake.

  I tried to login in safe mode by following the instructions in this article , but the same error messages.

  I use VMWare Fusion 2.0.8 and on OS X 10.5.8.

  Someone at - he had this problem and found a fix?

  Thank you!

  You will probably need to run a repair of Windows, the installation looks beat some key Windows components.

  KB.VMware.com/kb/1013846

• The upgrade from ESX3.5

  I intend to improve 3.5 U2 to U4 production environment. Definition of ESX for maintenance mode is perfect, but after the upgrade the upgrade of VMware ESX tools should be mounted on all virtual machines that require the restart of these VMs. in this case all of my production.

  Forgive me, but what is the point of the maintenance mode if you still need your complete production environment is restarted?

  MikeWazowski wrote:

  I confirmed in my test environment that goes from U2 U4 require the update vmtools. Restart also required.

  In the release notes for U4, he states that VMware tools will require an upgrade

  http://www.VMware.com/support/VI3/doc/vi3_esx35u4_rel_notes.html

  Need to plan the basis by restarting server. Thank you all for your answers

  Discover RVTools , it will help in the automation of your comment tools.

• User interface changes after an upgrade of the DBMS/Apex

  My Organization recently migrated to Oracle 11 g 12 c and Apex 3.1.2 to 4.2.5.00.08 when we moved to a new server.  There is an old Apex application of 6 years who now has the following when open to 42.0 Firefox:

  1. the page appears with the right pair of blue no white background.

  2. the tabs also have a background white, but taken sandwiched between 2 small images at the beginning and the end of the tab.

  3. the same white background is in all regions; That is to say, none of the regions have the correct background color that is there on the old server.  And the bottom of buttions is also white, so they all appear as text with a small image at the beginning and at the end, just like the tabs.

  This application uses the blue and Tan - theme 2, which contains a custom page template that is based on 'a level Tabs '.   Header section of this model makes reference to theme_3_1_GNT.css, which is a modification to a built-in css css this body tag contains a reference to the required blue background color: background-color: #003399 and I've confirmed that this css is in the correct path on the new server.   The models used for the regions of the page are: region between square brackets, forms area, Navigation area and region reports.

  The pages also contain a jpg image at the top containing the name of the application, which displays correctly.  This image was imported into the application itself.

  The application seems to work OK except for these user interface problems.

  So if the model is the same as on the old server and the css is the same, what is causing this problem?

  I suspect that the solution is simple and some of the problems may have to do with how the game of the tab has been implemented, but I have not used this tool in so many years that I can not find the cause.

  If I missed some piece of information you need to resolve this, let me know.

  Thank you.

  The custom theme stylesheet is (obviously) not found at https://apex.oracle.com/i/themes/theme_2/theme_3_1_GNT.css

  Please download this as a static enforcement on apex.oracle.com file.

  As the appearance of the page with this lack of resources is exactly as you described initially, I suspect strongly that independently have "confirmed that this css is in the correct path on the new server" that it is not loaded. What browser do you use? Use its tools of web inspector to check on the status of the application of the style sheet.