The upgrading and switching platforms

Similar Questions

• Error 651 PPPoE VPN connection after the upgrade and reboot

  I have Win7 and a PPPoE VPN connection working perfectly well until tonight after the upgrade and reboot, the VPN just stopped working and gives an error code 651.  I have nothing newly installed.  What was wrong?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will support what ask you

  http://TechNet.Microsoft.com/en-us/ms772425

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• Windows 7 upgrade advisor, Vista, says that Firefox must be uninstalled before the upgrade and that I won't be able to reinstall it, is it true?

  I'm currently running Vista, 32-bit. I am considering upgrading to Windows 7. I ran the report Upgrade Advisor and he said "Mozilla Firefox 20.0.1 must be uninstalled before the upgrade to Windows 7. You will be able to reinstall it after upgrading to Windows 7. "This seems inaccurate info, based on the Firefox site, but I want to check what I have to do before you start the upgrade. Leave Firefox installed and in place when I update or uninstall and reinstall then after the upgrade?

  Hello herplaw, you're right, this doesn't look good - firefox will work fine on windows 7. I leave it installed and to proceed with the update. in any case (if you need to reinstall it later), you can also save personal information that is stored in your firefox profile before continuing: back up and restore the information contained in the profiles of Firefox

• I don't want to upgrade to 7.0, I attend college online, and the update version does not work with my school. How can I stop Firefox upgrade? I have to keep uninstalling the upgrade and install the old.

  How can I stop Firefox automatically upgrade? My college online is not compatible with the upgraded version. I have to keep a new uninstall and reinstall the old.

  Tools > Options > advanced > update

  Uncheck the box automatically updates to Firefox.

• Some iBooks missing after the update and switch to iCloud

  Updated in 9.3

  Agreed to use iCloud, now some of my iBooks issue are missing

  Since the upgrade to ios 10.11.4, when you go to iBooks, asked me if I wanted to synchronize using iCloud. What I did. Then, about 100 + iBooks has shown on my Mac but not on my iPad or iPhone, despite having the same on all devices 3 apple ID and correct synchronization enabled buttons. When I looked at the LIST iBooks on library iBook of my mac (next to all the books, collections, authors and categories), many of my books has appeared as zero KB in size, but I could still open them on my Mac. They has not yet shown on my other devices. I deleted all my books zero KB. Then went to TRASH, moved into my OFFICE and then trained in iBooks once more. This time, they showed as having a value greater than zero KB and now appear on all my devices. So: delete, restore, import again. Must be synchronized.

• WinXPsysytem: The upgrade and have questions

  Have a dell e521 that I train and some questions.  Have already updated to 3 GB of memory on x 86 operating system.  Bios version active what 1.1.6 4/7/2007.  Have checked Dells site and they offer a version of bios 1.1.11 released on 04/09/2007.  Having checked their previous versions and mine is not yet in there.  Don't know if I should go with the 1.1.11 version or stick with what is on mine, any suggestions?  Also, I put in a 500 GB seagate HDD.  Have a 80 GB drive there now which is pretty maxed out.  Playing with the idea to put xp pro on the 80 GB and using the programs and storage 500 GB.  I would like to know if it's a good idea or not!  Could use pointers and how much others who have more experience I have of course on my best options for installation.  for performance and features.  Thank you in advance, Ron.

  It's sad to say, you should probably have spent your money on a new computer rather than on the RAM and a new hard drive.  Windows XP (you posted in a forum of Windows XP, that's what I assume you have) will be supported is no longer starting in April 2014. This means no more security updates and therefore increases the vulnerability to malware.

  That said, your system now-updated can probably support Windows 7. You must run the Windows 7 Upgrade Advisor to check the remaining material.

  As you say, Dell does not list the intervening versions of BIOS with 1.1.4, 1.1.10, so unless someone at Dell or in the Dell forums can tell you what "improvements" in your version or with your version 1.1.10, you have no way of determining that. Based on omissions, I think there were only minor changes in these versions.

  Normally, I would leave the BIOS alone.  Note, however, that Dell "recommends" 1.1.10 be installed because
  The update contains improvements or changes that will keep your system current and compatible with other system modules (firmware, BIOS, drivers and software) software.
  If you want to stick with XP, I would leave the BIOS alone. If you want to install Windows 7 (assuming that there are Windows 7 drivers for all your hardware), I would Setup 1.1.11.  Be sure to read and follow instructions carefully.

  BTW, it's a little surprising that you only have a 80 GB drive.  CNET review of the Dimension E521 said he came with a 320 GB drive.

• Error7 message about the signature unidentified, the upgrade and installation of iTunes 10.5 for Windows Vista.

  Original title: error upgrading and installation of iTunes 10.5 for Windows 6.

  I tried all kinds of ways to solve this problem, but I can't seem to find a solution. This all started when I tried to update my iTunes to version 10.5. Then came the error message 7 on unidentified signature etc. I could not even run my iTunes more then. I started download iTunes again to repair and it just doesn't work. I don't have problems with the installation of my iTunes for the first time a year ago and upgraded whenever I allow it.

  All other methods I tried to correct the error includes:
  • Uninstall iTunes completely and everything that it supports the programs and files (Quicktime, supporter of Mobile, Hello, Safari etc.)
  • Download Quicktime separately after you have uninstalled it as suggested by other users in some forum.
  • Update the frame Microsot.NET as suggested by the Apple Support site.

  • Manually started the installation of such Windows program suggested by one of the answers on this site:

    a. click the Start button, and then type services.msc in the start search box and press ENTER.
    b. Locate the Windows Installer service.
    c. check that the status is started. If the condition column is empty,
    d. right-click on Windows Installer, and then select start.
    e. If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
    f. restart the computer.

    I have tried for at least 10 times and I have not yet set and am frustrated. Would be really grateful a solution to this soon.

    Windows Version: Windows Vista Home Premium - Version 6.0 (build 6002: Servie Pack 2).

    Thank you.

  Hi Junetyl,

  What is the complete error message you get?

  Method 1:

  You can see the article next to the Apple support and check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  You can also consult the following article:

  iTunes for Windows: "Error 7" message when you open iTunes

  You can also try the following steps and check.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check if you can install iTunes.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  You can also get in touch with Apple using Arthur support.

  Apple iTunes Support

  Hope this information is useful.

• After the upgrade and 'restart', with the first step, vista hangs in blue screen. memory dump. then restart windows, continues with the upgrade installation.

  This is the update installed.

  Update type: Important

   

  A security issue has been identified that could allow an authenticated local attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

   

  More information:

  http://go.Microsoft.com/fwlink/?LinkId=179062

   

  Help and Support:

  http://support.Microsoft.com

   

   

  It's crash results.

   

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.0.6002.2.2.0.256.6

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               d1

  BCP1:                                                    00000001

  BCP2:                                                    00000002

  BCP3:                                                    00000000

  BCP4:                                                    8056662A

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini021710-01.dmp

  C:\Users\Robert B Benson\AppData\Local\Temp\WER-778569-0.sysdata.xml

  C:\Users\Robert B Benson\AppData\Local\Temp\WER147.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Some time after the closing of applications and stop, at startup, the system "says" there was an "unexpected", even if stop at the previous stop, 'things' seem close, hault and close.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem, repost in the appropriate Forum:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Configure the DHCP on the router and switch

  Good afternoon

  I'm trying to set up DHCP using CLI on a 2610 router and switch 2950.  With my current config, the host at the end of the switch (set to receive ip via DHCP) does not have anything assigned.  Here are a few shows:

  Router:

  Router_1 #show ip int br
  Interface IP-Address OK?   Method State Protocol
  192.168.10.1 FastEthernet0/0 YES manual up up (leading to pass)
  Serial0/0 YES no not defined administratively down down
  Serial0/1 no YES not defined administratively down down
  Ethernet1/0 YES no not defined administratively down down
  Ethernet1/1 no YES not defined administratively down down
  Ethernet1/2 no YES not defined administratively down down
  Ethernet1/3 no YES not defined administratively down down

  Router_1 #show ip dhcp pool

  Pool acer_pool:
  Brand usage (up/down): 100 / 0
  Size of the subnet (first/next): 0 / 0
  Total addresses: 254
  Rental addresses: 0
  Waiting for the event: no
  subnet 1 is currently in the pool:
  Range of addresses IP of Current index leased addresses
  192.168.10.1 192.168.10.1 - 192.168.10.254 0

  Switch:

  Switch_1 #show ip int br
  Interface IP-Address OK?     Method State Protocol
  Vlan1 unassigned YES NVRAM up up
  FastEthernet0/1 no YES unset upward, upward (leading to the router)
  FastEthernet0/2 not assigned YES unset down down
  FastEthernet0/3 not assigned YES unset down down
  FastEthernet0/4 not assigned YES unset down down
  FastEthernet0/5 not assigned YES unset down down
  FastEthernet0/6 not assigned YES unset down down
  FastEthernet0/7 not assigned YES unset down down
  FastEthernet0/8 not assigned YES unset down down
  FastEthernet0/9 no YES unset down down
  FastEthernet0/10 not assigned YES unset down down
  FastEthernet0/11 no assigned YES unset down down
  FastEthernet0/12 not assigned YES unset down down
  FastEthernet0/13 not assigned YES unset down down
  FastEthernet0/14 not assigned YES unset down down
  FastEthernet0/15 no assigned YES unset down down
  FastEthernet0/16 not assigned YES unset down down
  FastEthernet0/17 no assigned YES unset down down
  FastEthernet0/18 no assigned YES unset down down
  FastEthernet0/19 not assigned YES unset down down
  FastEthernet0/20 not assigned YES unset down down
  FastEthernet0/21 no assigned YES unset down down
  FastEthernet0/22 YES no assigned unset upward, upward
  FastEthernet0/23 not assigned YES unset down down
  FastEthernet0/24 no assigned YES unset down down

  What other info I can provide to solve this problem?

  Thank you.

  I think that you need to configure the router-on-a-stick.

  Post your DHCP configuration.

• Install the drivers for the upgrade and clean

  I ordered a drive to upgrade dell for my laptop that is currently on vista premium, do I need to download all the drivers on an external source before the upgrade?

  In addition, my office is on vista Basic, I am not sure if I have to do a clean install or upgrade, will not lose all the drivers after formatting the hard drive to do a fresh install? or is there another good way to do it? or... it's just better for me to go with the upgrade option?

  No, you will not have to uninstall Vista once you have upgraded to Windows 7.  Windows 7 will be the only operating system on your computer.  You can perform a clean install of Vista to Windows 7, but after installing Windows 7 in this way, you will have to reinstall all your programs, settings and files.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Accidentally, I installed the upgrade to Windows 7 without the first installation of Vista on a new hard drive. How can I remove the upgrade and install Vista?

  I replaced the failed hard drive and then inadvertently loaded upgraded Windows 7 before I reinstalled Vista.  Now I can't understand how to remove the upgrade to Windows 7, so I can install Vista.

  Boot from the Windows Vista DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  or you can try this for Windows 7:

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

• The upgrade and image quality [compare the elements to Photoshop]

  Hello:

  I've been using 6 items (yes I know, pre-historic) to edit and organize my photos. My collection of items has about 2600 images. Time to upgrade and I am convinced that Lightroom is the way forward for the organization. My question is for the Assembly. Almost all of my editing has been managed by the elements basic stuff. I wonder if I need the full Photoshop provided with Creative Cloud.

  My first question is program Photoshop will produce a better quality in a picture if I did the same editing with my old Elements 6. There was an improvement in the image processing program?

  Notice please.

  Jim Rendos

  Hi Jim

  Camera RAW is certainly improved, the come of great change with PV2012 (process Version 2012 aka ACR 7) introduced with Photoshop CS6.  Other changes have been made to Camera RAW, and Lightroom even more, but their impact on the image quality is zero (AFAICR).  Of course, you'd have the same version of treatment with the recent versions of Lightroom if you take this route.

  The difference between PV2012 and PV2010 are noticeable in the shadow and highlight recovery.  Especially to hide him.  You remember produces bad artifacts setting shadows / highlights.  PV2012 allows you to push the bejazus from a RAW file while keeping things at least somewhere near sensitive.  I've always hated the shadows / highlights and could never understand the fuss people do about it.

  Who help me?

• Why Adobe Premiere Pro offers more effects for the windows and Mac platform?

  Whenever I find a new cool effect that I would use it seems that it is only available on the windows platform.  I am a mac user and I was wondering why this is.

  Hi Producme1,

  This is because as Premiere Pro, for once, a single application of Windows (between CS3 and Premiere Pro 1.0). Effects developed in this time period still exist. When version has been ported to Mac, not all effects was coded based on timelines - as it was quite a monumental task to recode the entire application. You still see the remnants of this change to date. Rather than a lot of these recode effects, some of them are being deprecated since Windows.

  I suggest that you look into the use of plug-ins from third parties who can close some of the gaps between the Mac and Windows versions. I hope that helps answer your question.

  Thank you
  Kevin

• The upgrade and installation of Adobe Acrobat

  Hello

  I have Adobe Acrobat 8 Professional on my PC (part of the Adobe Creative Suite 3 Design Standard - version upgrade). Although I'm not able to upgrade Adobe CS3 to CS6, I believe that it is possible to update Acrobat 8 Pro to the latest version. Most importantly, I want to install the upgrade Acrobat on a new PC running Windows 7.

  The serial number for my existing Acrobat upgrade version begins with 1118-xxxx, although the registered version of Adobe Creative Suite 3 upgrade begins with a different suffix.

  If I buy the upgrade to Acrobat 8 Pro, told me that I can put the new upgrade drive in my new PC and will be asked my previous serial number (1118-xxxx, etc.). Once this is all going to work on my new PC and I don't have any software on my PC's previous owner. Is this correct?

  Thank you

  Phil

  You are unable to move suite-bundled versions standalones and who. Your serial number does not work. Is a "either / or", not "maybe / perhaps it could work".»» Save yourself the trouble, just get Creative Cloud.

  Mylenium