The user AD setAttribute questions
I try to use the AD_User.setAttribute method as part of an workflow to unlock a user account, I can read the attribute, but it does not appear to be written correctly.
My code is:
User.setAttribute ("lockoutTime", "0");
When the user is of type AD: User
The workflow runs successfully, but I can read the attribute and the lockoutTime value has not changed.
I'm this call correctly, or is this a bug?
It turns out that SSL is NOT required to do this. After a bit of back & comes with some internal contacts, I advanced and tried again in my dev environment...
Windows 2003 domain controller...
Set group policy to accounts to lockout during 120 minutes after 3 failed password attempts
Connection attempt 4 times with password invalid
experienced account has been locked
Confirmed my plugin announcement has been configured with and ADMINISTRATIVE account
The following code to unlock the locked account:
user.setAttribute('lockoutTime','0');
In the line above, 'user' is my AD account: User has been locked. After the execution of the workflow containing this code, I have confirmed that the user was more llocked outside and could connect to my Windows 2003 domain.
UPDATE: just as tested in a different environment to test this using a Windows 2008 R2 domain - same results as above. Account successfully unlocked using user.setAttribute('lockoutTime','0');
Post edited by: Burke.
Tags: VMware
Similar Questions
-
Quiz slides forward until the user can answer questions
In Captivate 8 quiz, quiz slides are turning to the next slide automatically themselves rather than wait for the user to answer. Why would it be?
The problem is due to an unusual combination of factors. In the preferences settings quiz, submit all them is activated. On each slide of questionnaire, or at least on some slides of questionnaire, you moved the button send off the slide completely. On these transparencies where the Send button is not at least partially superimposed on the slide of quiz, the quiz slide advance to the next slide when the duration of the slide is over. If you have the duration of 3 seconds by default slide, the slide of questionnaire where the Send button is off the slide advances automatically after 3 seconds.
-
OIM 11 g - authorization of the user management policy questions
Hello
(1) created a body-> human resources
(2) created a role-> HR_Admins
(3) assigned HR_Admins roles as the administrative role of human resources
(4) user1 created with the Organization as a role of human resources & HR_Admins assigned to this user.
(5) permission policy created for the management of users with the following selections
-> Create user authorization.
Constraints of data-> Selected "Users who are members of certain organizations" & selected above human resources organization.
Transfer-> role of the HR_Admins.
now, when I log in User1 I am not able to see Administration tab where I can choose create user.
I'm working on this issue for a few days, but not able to find the solution & I missed some configurations?
Thank you
Rahul ShahHello Rahul,
I tried your scénarion... with clause below
1) founded an organization-> human resources
(2) created a role-> HR_Admins
(3) assigned HR_Admins roles as the administrative role of human resources
(4) user1 created with the Organization as a role of Human Resource & allocated HR_Admins to this user. : default role all users
(5) permission policy created for the management of users with the following selections
-> Create user authorization. :-* "Select ALL."
Constraints data-> Selected "Users who are members of certain organizations" & selected above human resources organization.
-> HR_Admins role assignment.Data constraints
Organization security setting hierarchy aware (include all children's organizations)Now I am able to see the user tab to create, and I can create user in resources human org only.
If it does not work for you. Just assign 'ADMINISTRATOR of REQUEST' in the AUTH POLICIES. The result of the test.
Also, what is your version of the IOM?
Test with updated as new role name, org, and user data.
-kuldeepPublished by: Kuldeep on May 22, 2012 04:19
-
I need to create a complex scenario that results represent the user choices
Here's the scenario:
The user answers 20 questions that offer every three choices (not a quiz). Based on collated responses, a 'score' or 'level of advancement' leads to a specific page.
So, if they answered questions and the "score" indicates they are a beginner on average, a page will load with links to resources for a beginner.
If they are advanced, an advanced results page will load etc.
The problem is that there is no right or wrong answer, these are attitudinal and behavioural issues.
I want to also create five categories with a percent complete when they arrive at the page "score" relevant to their level there are five bars indicating their level of development in each of the five categories, and if they are at beginner level into three categories, intermediate to that and advance to one pictured, but the collective means of 'mark' are a way of "Beginner".
I have never attempted anything of this complex, would appreciate an overview.
I don't really agree with rod that questions could not be used at all the. I used MCQ to create sort of a survey measuring more than once. Here is an example of a different use case, but perhaps you will see the link to what you want to achieve:
Classified the investigation? -Captivate Blog
With the help of some system of quiz variable to store the results in variables user is another tip.
Secrets of cpQuizInfoAnswerChoice and... - Captivate blog
This conditional logic card is in fact the first thing I would say to create. And take into account all possible situations and combinations. This is certainly the first step.
Remember that Captivate comes with training interactions that might be useful if you decide to create also custom questions: buttons, checkboxes, drop-down list. They could save you time.
You don't say if you have marked you quiz in different parts that you want to branch to (beginner, intermediate, advanced)?
-
questions about the message of the user
I use TS to run a sequence of audit scope nor and want to display measurement in the user interface developed with LV I want just fresh my chart of waveform of the user interface after a measurement is complete if I use the method postusermessageex as file attatch. The question is that the will of the user interface does not not to this message and I think that something is wrong with my UI code. Anyone can pls look at my code and give me suggestions, thank you very much.
A brief look at the code, I noticed the following:
- It seems that you are passing in the SequenceContext to the UIMonitor reference, but the UIMonitor expected an applicationManager reference. You must pass this (a reference to the current applicationManager) in your sequence instead:
RunState.Engine.GetInternalOption (InternalOption_ApplicationManager)
- In addition, you will need to change the reference to applicationManager in your monitor to a reference rather than a container activeX (otherwise you will create a new instance of the applicationManager). The best way to proceed is to change it to a constand, then return to a control.
I am unable to run your code due to lack of dependencies, then please let me know if you still have problems after the implementation of the foregoing.
- It seems that you are passing in the SequenceContext to the UIMonitor reference, but the UIMonitor expected an applicationManager reference. You must pass this (a reference to the current applicationManager) in your sequence instead:
-
I create an account, but the user receives email to activate account, but a message account activate has been exceeded my question how reactive to this account id
Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html
-
How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.
[Profanity removed... MOD]
Hello
I just checked the details of your team, and the license that you have assigned intervenes as well on the same Adobe ID.
Please see the below help documents:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
How can I make a question that the user is able to update and respond again? Thank you.
I am creating a question that the user can update if it gets its bad to try again. Is this possible and if so, how?
I gave you a link that explains how to reset a such blade, was it not clear?
-
Background:
I created a questionnaire in which the user must answer each question correctly before to proceed to the next slide. That's what I did:
- Set preferences Settings > required > respond to everything - the user must answer each question to continue
- Set the number of attempts at the level of the question to infinity
- Made the Next invisible button and disabled the PlayBar
In this way, the user can proceed to the next slide in the issue with the submission process - and, since attempts are endless, this means that after having answered the question correctly.
Current objective:
I want the user to be able to click on a prompt for a hint. To configure this, I did the following:
- Created a smartshape titled 'click_for_hint' to display the text that says: "click here for a tip.
- Created a smartshape labelled 'hint' text display
- Show "hint" success value "click_for_hint".
Now, when the user clicks on the text that says: "Click here for a hint," the suspicion appears. So it works - great! However, once the indicator is activated, I would like to for the user to continue endless attempts until respondent correctly to the question... and then only after answering correctly, proceed to the next slide.
The problem:
If the user has submitted one or more wrong answers, and then activates the indicator, the slide just waiting until the user has answered the question correctly. Instead, it will be set in playing, proceeding to the next slide. I tried the smartshape 'hint' to take a break on the success of adjustment, but it does not work.
Is there a way to make the slide to wait until the answer to the question correctly before moving on to the next slide, even after the indicator has been activated?
Are you aware that your required parameter can cause problems, the blocking of the user? It is also completely useless because you have unlimited attempts at the level of the issue and hid the next button (hope, you don't need review, otherwise, I would recommend not to hide this button but slide it under the Clear key: the Question slides in Captivate - Captivate blog)
The index problem is related to the fact that a simple gesture going out of reading. I would like to see the timeline of the slide, to compare the points of suspension form and the question slide button. And maybe this blog can also clarify difference between simple/advanced: Why choose Standard Simple action?-Captivate blog
Regarding the buttons on question slides form: buttons on slides of Question/Score of Captivate 6?-Captivate blog
-
Hello
Pls can someone answer my question pls its here is the link
Q just quick who:
Won't COMPLETE event triggers of level FEIELD, even if the user clicks ABOUT on the field in question?
Thank you
Hello
Here is an explanation of the output events of the specification XFA (page 391).
get in, get out
Enter the event fires when the field gets keyboard focus, that it was caused by a user action
(in the field of the tab or by clicking with the mouse) or by a script by setting programmatically the
Update. It is also raised when a new selection is made from a list of choices, but this behavior can be prevented.
See below.
The exit event is triggered when the field loses keyboard focus. It has also triggered whenever there is a new selection
in a list of choices (followed by an input event), but this behavior can be inhitibited.
I hope this helps.
-
After a quiz can show you the questions and answers of the user to review of test
After taking a quiz, is there a way to show the questions and answers of the user to review of passing the test.
And those who failed the quiz would go to the first slide again to retake the test.
Thank you
Add an interactive object received, such as a button or slide 1 clickbox. Then the review will begin from there because Captivate counts of any object marked as belonging to the scope of Quiz.
-
STOP the user until that corrections of the question of implementation in the form?
Hello
(As I am very very beginner to Java SCRIPT, no pls pls pls syntax error)
I am allowing the user to enter a specific number of characters in the field (for example, COUNTRIES with a maximum of chacratars is 3, as the USA), so I put a posting on the VALIDATION MODEL, works very well, but, say, the user is entered in CANADA... my popup form Testament error message, some maximum is 3 characters only... then, the user presses the OK button on the pop-up window... and no has NOT resolved the problem (user suppose to do CANADA can), jumped and... continued to enter data into the rest of the fields... but I want to STOP the user THERE IT SELF!
Unless and until the user formatting LAMBASTS (maximum number of characters here) question, shape/system must not allow the end-user to go further / to enter data in other areas/grey all the REST of the stuff... User must set to go ahead. Pls let me know how I can get it?
Thank you
Hello
I'm not sure what exactly your needs.
If you want to hide all other objects in a subform, and then test the user on the event entry exit. If user input does not exceed three characters, then you could show the subform.
Does this sound like a solution?
Niall
-
The user of FrameMaker start question
I have almost zero experience with Framemaker. During my days of thesis, I used framemaker for a short time and returned to the latex! Finally, 10 years, I've been using Microsoft Word.
Now, after I've finished about 30% of the book, my Publisher is pushing me to move to Framemaker. (I have concluded that this thing of Framemaker is the BEST software EVER WRITTEN or my Publisher really really hate Microsoft Word!) :-):-))
As everyone here has more experience with Framemaker, I ask for advice on the following:
I have about 10 chapters in a book of engineering graduate with a large number of visio diagrams, tables and a large NUMBER of equations. Equations were created using Microsoft Word 2007 Equation Editor.
I first have to import the given in a book in framemaker and then continue to write in Framemaker. I do not have the luxury to learn first of all the software for several hours and then start using it. I'm looking for so for pointers on a quick way to get productive with it.
Here are my specific questions:
1. What is the best way to reliably import the current word document in a framemaker book? (Currently, it's a single word file and is one of the reasons to move to Framemaker to be able to deal with the separate files for each chapter. I don't mind create a separate for each chapter in Word file - if it comes to that.)
2. What is the best place to learn more about how to perform the task described in the previous question?
3. What is a good reference - either electronic or the dead - trees version I need once I start using Framemaker? The software I have is Framemaker 9.0, and it seems to be still too recent for books. But it is pretty close to Framemaker 8 can I go out with one more book for my current needs?
4. how import Visio diagrams works with Framemaker, moving forward?
If you have any other useful suggestions, I welcome them also.
Thanks for your time.
See you soon; "best,
Shankar swamy
He long ago, in a universe of FrameMaker far away, square1.nl used to
advertise a product or service or both who converted various
graphics to editable FM chart. Give them a try.In addition, there used to be a conversion utility that converted from latex
to the mif or vice versa all or maybe both. I don't know if he
would help you to find a way to convert, create new or recreate your
Word equations to latex, then to the FM band; I don't know if the utility works
for equations. I'm not sure if this is a FM-unix utility only, or if
There is a version of Windows. Just a wild stab here.FM9 interface offers radically different appearances than any
FM sooner, you may know, but many frequently used features and
the controls are always accessible through the menus of the FM, even if some call it
the new interface elements, and some call it the 'old'. Adobe has a
Webcast of the FM 9 interface in use free online; Maybe a list any
Member can give the link. It is not only educational about the user interface,
but also as to its use in a certain number of common situations.IMO, anyone who is comfortable in latex should be able to manage in FM,
especially with some experience recovered memory and resources of
This and other lists of FM.Good luck! Stay in touch with assistance list. It is always
educational for me (and probably many others, too) all what
interesting and creative, corners that you can paint yourself in what
convert to or from FM. Kind regards
Peter
__________________
Peter gold
Know-how ProServices -
Hi guys,.
I am a newbie to PL/SQL.
I really appreciate it if save you a little of your time to respond to this message.
According to paragraph reference 10 g Release 2 (10.2) and Guide the user to the PL/SQL in Oracle® database labeled using subtypes, I found that the constraint of the subtype defined by the user can be overridden when you declare variables.
Questions:
1. Why does PL/SQL compel user-defined subtype substitution? Or is this an unexpected bug that exist in PL/SQL?
2. is it arrive at Oracle subtypes as INTEGER, CHARACTER, etc.. ?
I have reproduced this problem using the PL/SQL code following against Oracle9i 9.2.0.1, which produced any error or exception whatsoever.
TO ELIMINATE ANY CONFUSION, THE ISSUE IS HIGHLIGHTED IN BOLD
-THE SAMPLE CODE TO REPRODUCE THE PROBLEM
DECLARE
-a user-defined (Xtype) subtype is defined with a precision and scale force;
Subtype Xtype IS NUMBER (1.0);
-However, Xtype is overridden when you declare the variable "var_num".
Xtype var_num (2,0);
BEGIN
var_num: = 10;
DBMS_OUTPUT. Put_line ('var_num =' |) To_char (var_num));
EXCEPTION
WHILE OTHERS THEN
DBMS_OUTPUT. PUT_LINE ("ERR: ' |") SQLERRM);
END;
/
-HERE IS THE RESULT
SQL > @D:\LocalWork\dummy.sql
var_num = 10
Edited by: HappyJay 05/09/2010 01:48Send me on email offline (remove the spaces) damorgan11g @ gmail.com and I will convey that to the person who is just that kind of decision regarding Oracle 12 currently.
-
Easy question: router WRT54G: how to rename the user and give a new password?
Not very computer, but following the recommendations in the FAQ, I have reset my WRT54G router to the default settings by hitting the reset buttong and entering into the Web site. I got a new computer and I forgot the old password. After reset to defaults now the link is not secure. How can I go about renaming the user and giving it a new password of my own - it was a while that I have configured the router, and I don't have the CD. Any help that you can offer or the direction you can piont me is appreciated.
Try to proceed as following:
Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...
For wireless settings, follow these steps: -.
Click on the Wireless tab
-Wireless network mode must be mixed...
-Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...
-Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
Please take note of the name of the wireless network (SSID) because it's the network identifier...For wireless security: -.
Click the sub-tab under wireless > Wireless Security...
Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
Please note the 1 WEP key as it comes to the security key for the wireless network...Click the settings advanced wireless
Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
Now let's see if you can locate your wireless network and try to connect...
Maybe you are looking for
-
Satellite A660 - Windows 7 startup problem
Hi, I have I think the biggest problem I have ever had. I have the Toshiba Satellite A660. I have Windows 7 ultimate 64-bit (just to know.) Computer laptop freezed so I pressed to shutdown (stop) to close. Then I tried to start it but I saw only "sta
-
Printing of booklets in windows 8.1
I have a computer with windows 7 and the other using windows 8.1. I can print my book in windows 7 but the same brochure in windows 8.1 drops after about 2 or 3 pages, and the order is wrong. Microsoft said that because regular documents print from
-
The Defragmenter report is:Fragments of files in file size that cannot be defragmented32 330 MB \Documents and Settings\Bill & LaVerne\Local Settings\Temp\~PST5291.tmpI tried to find this file in order to remove it, but were unsuccessful. I have the
-
32-bit Windows VISTA update problems
I have a Windows Vista Home Premium (32 bit) system. It seems that the automatic updates does NOT work properly. My system has not been verified (automatically) for 5 days now. It was every day. When I try and ' check for updates ' manually update go
-
Impossible to copy the image to jpg to the document
Original title: Photo of IMGjpg a document When I try to copy an image of IMGjpg to a document, it opens in the document as a filled box symbol that says > select your encoding that makes your document readable