the user has been created even after the deletion of system.dbf

Similar Questions

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov

• Catalyst business for web hosting, the site has been created in Dreamweaver, it can change it in BusinessCatalyst?

  So if I have my customer buys Business Catalyst for web hosting, and its Web site has been created in Dreamweaver, can she change in BusinessCatalyst? If this is not the case, how can she change his Web site? Should I get a sort of extension for Dreamweaver?

  Or even not at all, it must integrate specific widgets and allow the browser edition by Muse and BC account settings, but this process is limited of course. You cannot change the structure of the page in this way, simply replace some text and images. Otherwise the only way to get fully editable character uses a dynamic system with a database, HTML files not individual, that would of course render expensive account BC pro with all the trimmings, but you still work in the frame. Anyway, without more information about what really needs be editable person cannot counsel specifically.

  Mylenium

• All the messages in my Inbox display a response message has been sent, even if no message has been returned. How can I fix it?

  Hello

  I had set up a POP3 to my gmail account when I was away from the office to set up an office off so when I got home, because I is more necessary than this account and it was causing some problems for me, I deleted it. I think that's when the question began that I describe in the subject line: all messages in my Inbox display a response message has been sent, even if no message has been returned.

  Is there a way to fix this?

  A side-question: I used the POP3 account to respond to some emails so I was missing and since deleting that account, I can not longer see these details... message there at - it a way to recover these?

  Thank you!

  PS - Please, if in response, use profane... as I'm not very versed in thunderbird or computer General technical mumbojumbo!

  move to the queue of the Thunderbird product

• When I start the Director I get "the collection of files its not valid or its corrupted. A new empty collections file has been created ".

  I've been using Director windows 2.6 on my operating system from vista for several months.   I just did the upgrade to windows 7 and now I get this message.

  "The collection file is not valid or its corrupted." A new empty collections file has been created "."

  Then, it closes the program.

  I had to rename a file called FFDshow.ax to another program called Muvee AutoProducer 6.1 works but I do not see how would the file collections of this program.

  Help, please.

  Thank you...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support

  Original title: error reading from a photo cd

  Error message "Windows Media Player cannot play the DVD. The disk has been created in a way that the player does not support"when the disc is inserted into the PC HP Touchsmart yet he plays on the laptop.  Help please

  Hello

  (1) what is the file format of the photos on the CD?

  (2) you are able to play another CD/DVD on this computer?

  (3) have you made recent changes to the computer before the show?

  (4) is it a Blu - ray disc?

   

  Install the codec for Blu - Ray. Your Blu - ray player should have come with a medium containing the codec. You can also use your favorite search engine and free research Blu - ray codec.
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  If you have a program that supports Blu - ray, then I suggest you to use the Troubleshoot utility and check for the issue.

  You can try the following methods and check if it helps.

  Method 1: Play a CD or DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

   

  Method 2: Types supported by Windows Media Player files
  http://support.Microsoft.com/kb/316992

  NOTE - using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

   

  I hope this helps.

• When I try to read Blu - Ray, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Original title: Blu - Ray

  My computer can read blu - ray, but when I try to play one, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "How should I do?

  Hello
   
  The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray Disc, you must use a non-Microsoft program that supports playback of Blu ray and a device that can play Blu ray discs.
   
  See the article mentioned below:
   
   
  Read a CD or a DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player
   
  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  Hi all

  I copied a video to holiday on a Virgin DVD + RW but when I try to play on the same laptop where it was copied from, I get the message "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "Any ideas please? I can normally play DVD pre-recorded ok.

  Thanks in advance.

  =====================================
  DVD Maker might be worth a try:

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• Windows Media Player 12/Windows 7; Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support.

  Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "?  I have Windows Media Player 12 and it comes a new movie.  I can play other discs blue ray on this computer, but not this one.  Is there an update that I'm missing or a codec I need?

  Thank you

  This new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...

  http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.

  If you can not play... try using third-party codecs, but at your own risk :D

  Hope this helps you :)

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• Webutil: I can get the DATE of a file on the server has been created/modified

  I need to extract the date of a file on the server has been created or changed-for example, the date that will be displayed as a result of "ls * .fmb" on Unix.
  
  Anyone know of any Webutil function or procedure that can return this information?
  
  Thank you

  You can use HOST and put the rsultminto a text file, and then read that you use TEXT_IO, as

  HOST('ksh ls -ltr file.fmb > /tmp/file.txt');
  

• an answer file can be changed after it has been created?

  What is the name of the answer file after it has been created?

  If you mean an for an unattended Setup answer file, you must ask your question in ITPRO TechNet for Windows Vista.

  Please click on the link below:
  http://social.technet.Microsoft.com/forums/en/itprovistadeployment/threads

  They would be better able to solve your problem.

  Sincerely,

  Marilyn

• Responsibility has been say-published after end date in Oracle Applications 11i

  Responsibility has been say-published after the end date. We have the end date, a responsibility, and when we ask ourselves the same back he is not visible.

  But we can see the backend responsibility. Could someone help us please on this?

  Finally, we found the problem, it is Version column is null in the FND_RESPONSIBILITY table, but the trace query that displays where the clause is:
  WHERE (version = ' 4 'or 'W' = version or version = am'), as well as the following changes:

  a. create a liability on your TEST instance and save it and assign it to your self. Verify that you can re - consider it.
  b. date of the end of the responsibility.
  c. check if you can re - question it.
  d. What is the result of the version column in the FND_RESPONSIBILITY table for the responsibility?
  e. If it has a value, no one out and see if you can re - consider the responsibility of the forms.
  f. If the problem recurs, change the version of the table '4' or 'W' and see if you can re - query responsibility.
  e. If you can now interrogate the responsibility, remove the end date and a test to see if you can use it.

  Problem has been resolved after changing the version. This has been resolved with the help of the Support of Oracle.

  Below the reference is useful:

  https://community.Oracle.com/thread/2438822?TSTART=0

• NoScript installed accidentally, cannot get rid of it and JavaScript has been deactivated, even though it says that it is enabled - help!

  I accidentally installed NoScript when you try to remove the ads/pop-ups. Now it is at the origin of the problems on sites that I use regularly and I can't get rid of it. It does not appear on the Tools/Add-ons so I can disable and JavaScript has been deactivated, even though it shows as "Enabled".

  Help would be appreciated.

  It has never worked exactly as ghostery has never worked all that I get is not the extensions plugins

• How to save a copy of Windows XP that has been created by an image?

  I used 'Image for Linux' to create an image of a PC with Windows XP, SP3.  With that done, I can copy the image to a new PC and it works fine (assuming that I stay within the limits of the PC HAL).

  My problem is that I don't have to enter a new key of Windows XP when I installed the image on another PC. for example, I use a license of Windows XP on two PCs.  Since I want to be legitimate on my software license, I tried to activate Windows XP license to new PC - but the computer says that the license is already activated.  So it is logical that the new PC would react like that - I put the picture of an activated copy of Windows on a new PC, the new copy of Windows must also think that it is enabled.

  All this brings me to my original question: how to save a copy of Windows XP that has been created by an image?

  Hi RichardMatt,
   
  I recommend you contact the customer service of Microsoft for queries on activation for clarity.
   
  See the following article to do the same thing:

  How to activate Windows XP