The user interface resolution problem

Similar Questions

• Data flow of the User Interface general problem (LabVIEW 2012)

  I have problems reading & checking to a tab group user input (see the "Test settings" tab in the attached example).

  Essentially, I need to define and test many parameters.

  In the example, I need to create a bitmask of four switches to selection. Only the system works a treat, but in the context of

  the Panel tabs switches are never 'reached '. I tried to put some time structure around the switches (which works ex vivo

  See attached 'channelselect.vi') but the switches are never reached when I'm not in the code. Basically, I don't want

  Leave the pane until all parameters have been set and verifyied.

  I tried business structures (per group), structures plate Structures (group picture by picture), event (change nutton event)

  I expect the same problems with the other parameter sets. I need to change - set - check, in an order any.

  Understand that the "adjustment" mechanism is linked to a sub-vi/class method where the parameter is tested, defined and verified.

  It is a long-term approach to the fundamental question "How would you have it out"? I don't know that it is a misunderstanding of basic

  my part of the dataflow paradigm. I'm not looking for anyone to do my work for me, but I want to understand how this

  Works I can get on with my day.

  Thanks in advance for any help that you can present.

  You can still have the tab control.  It is just useless to do all your processing when the user changes the tab.  You can do event on the button presses as well.  Treat the VI as a whole VI, not different tabs that you have to manage.

• The user interface related problem: cannot add the status buttons

  Hello

  I'm developing a screen where I need the header and status with controls like buttons and the EditFields. Please take a look at this code

  editField = new EditField();
  
        updateButton = new ButtonField("Update");
  
         cancelButton = new ButtonField("Cancel");
  
        /**        * set up Status manager       */       VerticalFieldManager statusVerManager = new VerticalFieldManager();       HorizontalFieldManager statusManager = new HorizontalFieldManager();
  
          /**        * Add fields in status manager        */       statusManager.add(editField);     statusManager.add(updateButton);      statusManager.add(cancelButton);
  
          statusVerManager.add(new SeparatorField());       statusVerManager.add(statusManager);      /**        * Set status as status manager        */       setStatus(statusVerManager);
  

  Here I can see my edit of the status field but may not see a Cancle and update buttons.

  Previously, I have tried with subLayout() for both the Manager but could not display buttons.

  Waiting for your comments on my code. Atleast help me understand what it is wrong.

  Thanks in advance people.

  Hello

  Solved the problem myself.

  Here's the summary I've done.

  1 removedStatusVerManager. In fact, it has been used only to a separator above the horizontal management of State.

  2 called sublayout inside the statusManager and delimited the height and width.

  3. called setLayOutChild() to do my fiedl edit fixed width and height.

  (I had followed procedure until 3 before I had done new is in step 4)

  4. calls the setPositionChild() method. In fact when I throw a child I have defined his position and the position of all the children who will be added in the same manager. So also set the position of other controls of BROTHER with her.

  5. Add the controls in the Manager.

  He spent setStatus. And I am able to make the desired screen.

  Thank you @ekansh for your answers.

• The User Interface is larger than it should be, how can we solve this problem?

  Our marketing director is an issues with its user of Acrobat interface.  His vision of the overall UI is twice as big as it should.  We uninstalled and checked preferences but nothing has changed, everything up in the toolbar and stickies are larger than it should be, anyone have any suggestions or fix for this issue?

  Thank you

  Billy

  Hi Billy,

  I suspect that the size of the text in the control panel of the system is 150%?

  It can simply go in Acrobat preferences-> General-> then change the 'screen resolution grid' at 100%. This will force the user interface to operate at 100% as it did before.

  Please let me know if it works.

  Thank you

  Luke

• Update the user interface problems

  I have an application that has three buttons at the top of the other, but is never visible at a time.  On the initial configuration of the application, the user interface is correct, but once one of the clicked button events fire several buttons appear at the same time.  All buttons are dynamicslly created and stored in a table to access.

  A few snippits of code:

  The buttons are created like that and then added to a canvas:

  
  browseButton.label = "Browse";
  browseButton.id = trackNumber.toString ();
  browseButton.width = 92;
  browseButton.height = 30;
  browseButton.setStyle ("right", 0);
  browseButton.addEventListener (MouseEvent.CLICK, fileRef_browseHandler);

  
  removeButton.label = 'delete ';
  removeButton.id = trackNumber.toString ();
  removeButton.width = 92;
  removeButton.height = 30;
  removeButton.setStyle ("right", 0);
  removeButton.addEventListener (MouseEvent.CLICK, removeButton_clickHandler);

  
  clearButton.label = "clear";
  clearButton.id = trackNumber.toString ();
  clearButton.width = 92;
  clearButton.height = 30;
  clearButton.setStyle ("right", 0);
  clearButton.addEventListener (MouseEvent.CLICK, clearButton_clickHandler);

  canvasButtons.addChild (removeButton);
  canvasButtons.addChild (browseButton);
  canvasButtons.addChild (clearButton);
  canvasButtons.horizontalScrollPolicy = 'off ';

  Pretty easy.  Where the problem occurs is removeButton_clickHandler.  It passes through and hides all buttons and makes the Browse button active thus active / disable another image.  Turns on and off the visibility making:

  public void HideFileButton(currentButton:Button):void {}
  currentButton.setVisible (false);
  } / / HideFileButton (Button)

  public void ShowFileButton(currentButton:Button):void {}
  currentButton.setVisible (true);
  } / / ShowFileButton (Button)

  I see that the visible property is changing, but the UI is not hide the buttons that are no longer visible.  I got around this origin by setting the alpha to 0, but it seems I'm missing something simple.

  Can anyone shed light on what I'm missing?

  In general, you define the button visible = false immediately except the one you want to be visible.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• How can I change the size/scale of menus of the user interface in CS6?

  Recently got a new laptop to work running windows 7, CS6 and menus of the user interface are almost unreadable. Help, please!

  I can't tell you how many times I hear it, and it's something that has to work on Adobe. The problem that you are running is that, as our instructors to expand and the resolution increases, all the elements in our software applications (buttons, menus, etc.), are getting smaller. Your only current option is to reduce the screen resolution of your computer. To do this, right-click on your desktop, and then choose the resolution of the screen. Slide the resolution down until everything is readable for you. Usually, something in the neighborhood of 1280 X 800 works but it is very subjective for each user.

• Type the size of the user interface

  It's almost the end of 2015 - y at - it a solution to the ridiculously small UI in the CS6 / CC products?  I use Illustrator and PS a lot, and the size does not work.

  I have 20/10 vision, do not wear sunglasses.  I just upgraded to dual Dell UltraSharp U2515H 25 "monitors with a native resolution of 2560 x 1440.  The user interface in CS6 products is almost unusable and I can't find any way to change that.  I see the forums full of this problem since at least 2013 and probably before.

  Adobe, fix this.  There are alternative package graphics and I'm not locked in your products.

  Ideas of pragmatic community or solutions would be welcome - don't waste all the time will tell how it works fine for you, or preaching us on how we should just use Adobe products as they are.

  This is a problem, it's true, and I'm not alone in this observation (notice I didn't say "notice").

  Thank you.

  I have everything set to CC (2015), and it seems now the user interface option is available in both I and PS

  As much by the support of the HiDPI, it will now be on the same scale scale level because the OS (Win 7 x 64 in my case) - 100, 150, 200%.

  Looks now much better and more usable.

  BTW - I hate the interface for the new DC Acrobat - I'll be restoring the Pro XI.

  Thanks for responding.

• Offset of the user interface after update of El Capitan

  Hello. Since I upgraded my Macbook Pro late 2013 to El Capitan retina, I've known GAL of the user in function, mainly opening animation of safari and switching between desktop computers. These issues are only to make my user base, I created a test user and concluded that the test user was not the offset of the user interface. I have reinstalled the operating system, as well as talked to apple. Apple had me reset the Pram so that delete files, including:

  / Library/LaunchAgents

  ~/Library/LibraryAgents

  / Library/LaunchDaemons

  / Library/Caches

  ~/Library/caches

  and many other files like these.

  None of that helped, my UI lag is still there and fine. Also, I'm not sure if this is relevant; However, my recovery HD (available from start by pressing the alt/option key) is not an option. I'm not sure if the files I deleted with apple support caused it or reinstalling the operating system has done this. IM thinking delete files because I reinstalled the operating system using the HD recovery.

  Does anyone know how to fix the lag in the UI? I know other people have this problem, google search and this forum but no clear answer has not developed.

  Thank you

  Caulin Bloom

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• WIN8 registers touch but no reaction from the user interface?

  Anyone having problems with Win8 button when your fingers are clearly registered (Windows gives this feedback from the spherical ripple effect) but the user interface under your finger does nothing? No not the button and so on.

  I live it with some Chrome for example, with the small button tab when it is near the top edge of the screen.

  If I drag the window to the center of the screen, I have no problem with getting keys recorded. Hit the button new little tab gives no trouble.

  When user interface elements are close to the edge, no reaction, even if the wave indicator appears.

  Cannot know if it is a driver or a HW problem. I use X220T.

  Example screenshot

  May be a problem with Chrome, in fact. Tried with Firefox and the new tab button is a lot easier to hit. ---> will give Chrome devs a hint

  EDIT: what you know! The new beta version has already dealt with this issue:

  https://www.Google.com/chrome/browser/beta.html

• Flatten to a string to send arbitrary objects by messages from the user interface?

  Hi people,

  I am trying to send arbitrary data by messages from the user interface defined by the user to my labview interface. Something funny happens then: if I send the data through the message of ui, it seems I have something strange. There is only one character or nothing in the message of the user interface that reached my reminder.

  It seems that flatten channel also creates control characters that are interpreted by NI TestStand and Labview not as members of the chain, and for this reason I only get incomplete data. within the action of testand, which creates the flattened data, I put a dialog box to display the string data, and it seems that at least up to 255 (ascii) characters are used.

  Is there something like uuencode/uudecode to avoid this problem?

  Thanks in advance

  Okidoki, found.

  His «binary"produced by «Flatten the string» string Apparently I thought, the LabVIEW data type is incompatible with the API of TestStand from LabVIEW. In conclusion I would classify this as a bug (sorry people, at least there should be documentation) API for LabVIEW TestStand 2014.

  As a solution, I use flatten it in XML, which is a printable and human readable 'normal' string.

  It was trial and error, and I'm not enjoying this.

• Why me disables the user interface click on another button, while it performs a scan?

  Hello

  When I run the user interface and click on a button that is sweeping the voltage for a period of time, I can't press any other button that sits on my Panel, lets say the Abort button that would prevent the action.

  So when I take the data and I realize that I should stop him before he finishes the scan, I can't and it's a really bad drawback.

  How can I improve this problem?

  Thank you

  Hi m.s.taba,

  It seems to me that your code runs the function leave but does not exit the loop you are, then the program stops at the end of the loop.

  To avoid this, you can:

  • use a global variable to the time your long recall and the recall of quit smoking
  • Call ProcessSytemEvents in the loop
  • reminder for the button leave defines the global variable
  • inside the loop, immediately after ProcessSystemEvents, you should test the value of the variable, and if the value you must break out of the loop
  • only after the exit of the loop, you can complete your program

• Error variables look a tab after race change the user interface

  Hello

  I have a problem which seems to be a bit like this:

  http://forums.NI.com/T5/NI-TestStand/error-viewing-variables-tab-in-runtime-operator-interface/m-p/1...

  The VI I'm running is a step of edit of a type of step. LabVIEW checks if the property 'Step.Setup.ReadMeasName' exists, fills a listbox with her if she does. An another ListBox with all available measure names will also appear on the user interface. The user has an Add and Remove button to remove the 'ReadMeas' list box measures or add them to it of the listbox 'MeasNames '. Several names may be added/removed according to what is selected when you press the buttons. Once 'Fact' is clicked the VI writes the 'Ref' to the list box "ReadMeas" property to "Step.Setup.ReadMeasName", using a node to set the value of property that is passed the TestStand sequence context. If the property does not exist it creates.

  The only time where I have any problem is when I try to remove items from the property, after it is already initialized (i.e. non-empty). In other words, if I run the VI of teststand, put several names as in "ReadMeas" click on done, again run the VI (already added names appear in the box when the user interface is displayed, LabVIEW reads "Step.Setup.ReadMeasName"), then remove the names. IF "ThisContext.Step.Setup.ReadMeasNames" has opened in the tab 'Variables' step when you try to remove the names, I got this message in the Variables tab: 'one or more errors occurred. Please save your work and restart the application. "If I'm careful of not having expaded 'ThisContext' in the variables tab, but check the property before and after the removal of names in the list it does not work properly, and there is no error.

  This isn't a big problem because I doubt that the end user will check to see that the property has actually filled, but I still want to fix the bug if possible. I installed the patch for TestStand 2010 and the .net Framework 4.0. Someone has an idea of what might be happening here?

  Thank you

  -Josh

  Josh-

  Looks like you are running in a known issue 193751, which is documented in TestStand 2010 and 2010 SP1 known issues list. It is a problem that we intend to fix in a future version of TestStand.

  I hope this helps and I'm sorry for any inconvenience this issue may cause you.

• Impressive transformation slow due to the updating of the user interface

  Hello

  I feel a huge slow down in my test as engine

  I update the display after each test. It consists of a rather

  "simple table" with a subtle change of color and bold

  to indicate the failure or success of the test:

  

  I have also tried several things to determine what routine was

  make the program almost crawling like a snail, here's my

  results:

  No UI refresh: 0m48s (same as Teststand with no updates of the user interface)

  The discount but no page table switch: 1m06s

  Bay of refreshment and switch page: 1m26s

  There are 314 tests, up to 314 redraw and possibly

  switch page 314 to reposition the view. Which gives the

  following user interface refresh costs:

  

  Update of the table: 18 years/314 = 57ms (replacing just a single line, Center to top)

  Switch to page: 20 s/314 = 64ms (bottom right corner)

  Is this really the case? Is there a way to make the refresh of the user interface

  faster? Create two separate loops/threads, one to make

  the test, one for updating the UI asynchronously?

  I understood for an overall picture about different

  widgets, but here I'm 'just' display of channels...

  David Koch

  Well, multi-listbox control is a problem if your change causes access to the muliple property node. For each property node LabVIEW normally does a refresh of the user interface which is very quickly. Fortunately, there is a fairly easy way to fix this.

  Use a node of property for the current VI (just drop a property node and change its class type VI Server-> VI reference) to get the reference of the Panel. Then use another property node connected to your reference of the Panel and select update from the Panel to postpone. Set this value to true before your Listbox (and any other updated user interface) and set the value to false then.

  

• The best way to separate the user interface in the model LV 2012 queued Message Handler?

  If you create a new "queued Message Handler" new model 2012 LV, you will see a blue box in the case of "Update view" that says the following:

  Code Recommended - If you wish to decouple the Message Handling Loop from your user interface, consider creating User Events (like the "Stop" event in this VI) to message the Event Handling Loop whenever the user interface needs updating.
  

  I would like to give a suggestion, but I am struggling to find the best way to do this and still keep code modular.  The template creates a user - Stop.lvlib "event with a create/Destroy/fire Subvi.  I would like to create a library of "User event - Update UI.lvlib" similar with similar Create/Destroy/fire Subvi keep this new modular and separate user event.  The problem, I am struck, is that there may be only two hydrants in case Structure dynamic event so, how I modularlize creating user events in separate SubVIs and always maintain this dynamic event terminals?

  As a follow-up on the issue, it would be preferable to have a library of user by indicator events that must be updated or that a single UI update of the user and then event pass a cluster as the message that contains the name of the control for the update (to use with a structure of matter), then the data to go with it?

  Thank you!

  Instead of having the events to record in the 'create' methods, you could be part outside your 'create' SubVIs and then simply bundle them. Then, you create your individual event of the user management. See excerpt where I created a vi 'Create user event - Update' in front of the stop.

  

• Slow response from the user interface with acquisition of data of type long time

  Hi all

  I have a question to ask more out of curiosity than necessity right now. I've built a program that acquires data from the accelerometer and the Treaty in a number of ways: filtering, FFT, FRFS, things like that, but the answer of the UI is still slow, because I need a resolution of frequency of 0.2 Hz for my data domain, which means that the sample acquisition time is 5s and all this awaits before execution.

  My question is this: is there a way to completely isolate the user interface of data acquisition so that it responds immediately?

  I tried a design model of producer consumer with queues, but found everything to be always waiting for samples to be taken. Maybe it was exactly as I did.

  Thank you

  Phil

  If you need to sample for 5 seconds in order to have enough data to analyze, so unless you can "predict the future" and "knowing" the five seconds of data, simply wait for the data that arrives.  Using parallel loops of producer-consumer will allow data acquisition to proceed (for the next 5 seconds of data) while you do the analysis, but you still have to wait for the data to be analyzed.

  Note that the previous paragraph assumes you are collecting data in 5 seconds 'chunks' and analyze each "chunk" (independent) on arrival.  You could also do something like having a "second 5 sliding window" which moves, say, a second at a time, giving your FFT a finer resolution of 'time' (at the expense of their independence).  This would be a (slight) change in your loop of producer (you want to taste in 1 second pieces, accumulate 5 these pieces) and the consumption loop (start analyzing, spewing a FFT every second, while replacing the older "chunk" with the most recent - a queue with loss can do for you).

  Bob Schor