The user should not have Edit access in EA

Similar Questions

• How do to set the policy, the user should not change/reset password twice within 24 hours

  Hello

  I have a requirement in which, the user should not change/reset password twice within 24 hours. Is there a way to achieve the IOM.

  Is there a property in IOM whereby we can set this property?

  I checked the password and all the properties of the system strategy, but he could find a?

  Could you please suggest, how to get there. all references are greatly appreciated.

  Thanks in advance

  If you set password history on don't allow orevious you can reference the table pwh.

  You can also create a UDF who inquire about the handler reset passwoed and check against it. IOM has many points of validation of your code to.

  -Kevin

• I have a HTML5 form that sends a null (%) if the user does not have a choice. It works fine, but I get an error of W3c on the value of '% '. Is there another way to send a NULL value?

  I have an HTML5 form that allows the user to select 1 of 6 provinces of Costa Rica. If they do not select a Province, I use php code to send a NULL value and the other selections research of the form looking for all Provinces. If they choose a province, we are looking for database records that are found in this province.  Currently I use the value = '%' as the selected value if the user does not have a choice. It works and looks in all provinces, but I get an error of W3c checking on the value = '% '. Y at - it another way to send a NULL value. PS: I have the same problem on the following form which allows you to select the Business category. The page is http://www.yellowpagescr.com

  Here is a copy of the code. The RED line works but gets a W3c issue error of the test page. :

  < form = class "navbar-form Center navigation bar" role = "Search" action = "#searchresults" method = "get" name = "selectterms" id = "selectterms" title = "" >

  < select name = "province" autofocus class = 'copyright' title = "Click to select a Province (optional)" >

  < option value = '%' selected = "selected" > all Provinces < / option >

  < option value = "alajuela" > Alajuela < / option >

  < option value = "cartago" > Cartago < / option >

  < option value = "Guanacaste" selected > Guanacaste < / option >

  < option value = "heredia" > Heredia < / option >

  < option value = "Limon" > Limon < / option >

  < option value = "Puntarenas" > Puntarenas < / option >

  < option value = "San Jose" > San Jose < / option >

  < option value = "Other" > other < / option >

  < / select >

  The correct way.

  " value =" " " selected disabled> - optional Province.

  Nancy O.

• If the user does not have their e-mail address defined

  Hello
  
  If some users don't have their email address in the fnd_user table, then will goto the user notification work? What should I do to ensure that the workflow is not raise an error in such a situation and always send a notification to this user?
  
  Thank you
  
  Kumar

  Kumar,

  Notifications are assigned to users regardless of the email address they have. If a notification is the target of a user so the user will be able to see it in the list of tasks of notification, as long as the notification is open. Now, if the user turns out to have a valid e-mail address and sender of workflow works correctly then the user will also be sent an e-mail with the content of the notification.

  There is an error or warning if a user does not have an e-mail address; the notification will be always accessible from the task list.

  Kind regards

  Alejandro

• Part to the homegroup does not have editing permissions

  Hello

  I have two computers windows 8 in the same homegroup.

  When I share a folder for the homegroup and give him the view/change permissions, view, it changes after the restart of a computer.

  I think it might have something to do with the fact that records are on a drive defined as a storage space in the storage pool, since I have done some tests on folders in the drive ordinary and it does not reproduce on them.

  Did someone familiar with the issue?

  Thank you

  I think I found the cause of the problem.

  It has nothing to do with storage spaces.
  It is located in the folders that have been added to a library.
  Adding to the library itself a lose the change permission.
  I guess that once that windows support is the append action and causing records to lose editing permissions.
  I take everything simply a folder where I gave a display/change permissions for the homegroup.
  I add it to your library.
  Check the permissions and now it can't be read.
  Tried it on a second computer that has windows 8, and happens too.
  Never happened to me on before windows 7.
  You know the problem?

• I get the error message "logon failure: the user has not been granted the type of logon required on this computer." on the workgroup computer.

  Original title: home network problems

  Here's what I have-

  1 PC connected via LAN - named PC - running Windows 7 pro 32 bit

  1 computer connected via WiFi - named TECRA running Windows 7 pro 64-bit

  1 computer connected via WiFi - named TOSH running Windows 7 Starter Edition

  Network LAN named changed to have the same name as the network WiFi (SSID)

  All computers have the same workgroup name

  Initially, I had a home group for them, created by TECRA but trying to solve the problem I deleted it.

  PROBLEM:

  PC and TOSH communicate perfectly both ways

  TOSH and TECRA so

  HOWEVER, the PC can access TECRA via the NETWORK, but sees TECRA PC and can not access

  Error message:

  \\Parents-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if access you permissions. Logon failure: the user does not have the type of logon required on this computer.

  Attached the screenshot:

  Please Please HELP...

  Thank you

  

  Hello

  I suggest you to run the next fixit mentioned in the following link and check:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034/en-us

  Please answer us on the State of the question to help you further.

• Cannot open my encrypted Documents? -Cannot open the document: user does not have access privileges

  I am using Window7 and I got some of my encrypted files by opening the properties of the file and selecting the encryption option. I have not had any problems so far, but all of a sudden I can't open my encrypted files. There is an error message indicating "cannot open the document: user does not have access privileges. But I have no other user account on my computer and I am logged in with my administrator profile. I turned off my computer, rebooted and tried various methods, but when I open the file it shows the same message as above. Help, please?

  Hello

  Please follow the steps from the link below.

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

  Also check out the links below.

  Encrypt or decrypt a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  Recover encrypted files or folders

  http://Windows.Microsoft.com/en-us/Windows7/recover-encrypted-files-or-folders

  Import or export certificates and private keys

  http://Windows.Microsoft.com/en-us/Windows7/import-or-export-certificates-and-private-keys

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Adobe Illustrator for error message "unable to save the picture. You do not have enough access privileges. "ID:-5000"

  Trying to save the illustrator on new Macbook pros and the system file gives me the Illustrator from Adobe to the error message "unable to save the picture. You do not have enough access privileges. ID:-5000 "... No idea what it is how to get a rise out of privileges?

  You are not allowed to write to the specified folder.

  CHEK your access privileges.

  Also: in case you save to a network: do not.

  Try to save in the Documents folder in your user folder. Then close the document and check what needs to be checked.

  If you need additional assistance, please we say system and version of Illustrator and where you want to save.

• I need to install Flash Player on a computer that does not have internet access. The 'flashplayer18_d_install.exe' I copied everywhere that 'no Internet' computer wants to deal in the internet to do something and of course fails. I need a ins

  I need to install Flash Player on a computer that does not have internet access. The 'flashplayer18_d_install.exe' I copied everywhere that 'no Internet' computer wants to deal in the internet to do something and of course fails. I need an installation file that won't connect to the internet. -help

  Hi colinkerr22,

  Offline installers are displayed at the bottom of the Installation problems | Flash Player | Windows in the section "problems".

  --

  Maria

• I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

  Thank you

• Satellite Pro M30 - error message: the user is not authorized to update BIOS

  Hello

  I bought a Satellite Pro M30 of second hand. This one has the Bios 1.30... I would like to install the bios v1.70.

  I am running Windows XP Pro SP3 and tried first update in Windows.
  I however got the message "the user is not allowed to update BIOS.

  This message is quite surprising given that I have administrator privileges.

  I read that you can use a floppy disk to update, but I did not...

  So, is it possible to update the Bios with the CD?

  See you soon,.
  R.S.

  Hello

  I checked the page European driver of Toshiba and found the version of BIOS 1.7 WIN in the field of ARCHIVES.

  As you can see, it's a version of BIOS Windows and not a traditional version of the BIOS (trad BIOS can be updated using the diskette).
  This BIOS win can be improved only from a running OS Win.

  In any case, I see that you have installed SP3. It could have a bad influence on the update of the BIOS.
  Then maybe you should try to update the BIOS without SP3 installed?

  Remove SP3, download the good BIOS, unzip correctly and then try to run the BIOS update file.

  _Ps: If you laptop then runs without problem a BIOS update is not necessary! _

  Concerning

• Our published application crashes when the user is not connected to WiFi

  It became clear after the last launch edition our published application crashes when the user is not connected to WiFi.

  This is a new one on us, someone at - it ideas?

  There was a bug in all versions of Viewer 24 and earlier that have arisen during the last iOS updated acme outside. If you upgrade to v25 or later version the issue will go away.

  Neil

• See the users that you have shared a Script with

  Is there a way to see the users who you have shared a script with?  I spent in and added the email addresses of a few people with different roles and wating to do a couple things:

  • Make sure that everyone who needs to access, I added
  • Who are the co-authors or commentators on the color code

  I don't see anywhere that I can view those which I gave access, to check or do one of those two things.

  Your help is appreciated.

  So that the script is not accepted by all the world appears as a Document not shared. If you click not shared Document your name would appear there with the owner role. As soon as the first person to accept the script, it looks like Shared Document (2 users) and clicking on it would reveal your name and the name of the worker. This number and the information contained in this area would be keep to increase as users increasingly accept the sharing of the script.

• AMT-01190: the user is not authorized to perform the requested listener com

  Hi all
  I just reinstalled forms10g oracle and oracle 10 g rel 2 on windows vista. The first time I installed both software, I swithched d pc switched off without turning off the earpiece on my laptop. When I rebooted, I found that I could not start the two forms 10 g and oracle 10g database, not to mention loggin. I have therefore re-installed two prodcts. Whenever I try to turn off the listener I get error TNS-01190: the user is not authorized to perform the requested listener com. I tried several ways to turn this off, but every effort has failed. After reading several books on this subject, I learned that if you change the password for any user who knows the password should be able to turn off the listener. But I still get the same error when trying to add a password. Please can someone help me by telling me how I can deduct the oracle user who has administrative rights to perform this task.
  Pls forgive me for the long text. Thanks again. PLS, note I'm not an expert so pls be explicit in your explanations.
  
  see you soon
  AJ

  You are welcome.

  Another method could be this:
  -try to identify the Oracle home for the listener. This should be the same house where the DB.
  -Open a prompt on your vista, the ORACLE_HOME value this folder location, and then cd to this location of ORACLE_HOME.
  Now, enter the following text:
  lsnrctl start

  You should do as a user with administrator privileges.

  AMN