The video driver is not installed!

Similar Questions

• video driver is not installed

  I'm running a dell optiplex gx 280, I installed the driver of display as well, but the video controller is not install... Please help

  Hi RORO REHMAN.

  I suggest to contact Dell support for further help and information as there are no drivers for Windows 7 has.

  http://support.Dell.com/

  http://www.Dell.com/support/drivers/drivershome/download/PLX_GX280

• 3005 pro MT: the coprocessor driver is not installed

  Product no.: VS638ut #ABA

  [Personal information]

  Error "the coprocessor driver is not installed.

  The hardware ID you posted is present in the pilot, so the manual installation should have worked (unless the W7 driver is not compatible with W10).

  [NV. NTamd64]
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_03F4
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_07DA
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0753
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0AA3
  %SMU51Desc%=SMU51_Inst,PCI\VEN_10DE & DEV_0D7A

  I shot the driver in the compressed file it upwards and attached it below.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device of coprocessor requiring the driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Restart the PC.

• Cannot print on the HP LaserJet 4050 printer - "the printer driver is not installed. Can't find a Package of basic driver required by the printer driver Package.

  Running Win7 32 bit.  Have had the printer HP LaserJet 4050tn installed for 2 years.  It is on the network and is always accessible from other computers on the network successfully.  I was printing to it in a billing program web-based when my PC froze.   Rebooted and was no longer able to print to it.  Tried to delete the printer, the spooler of compensation / Max ', and re-installing the printer with drivers downloaded from HP (tried the standard and universal drivers).

  When I try to install the printer I get a message "Player of the printer was not installed.  Can't find a Package of basic driver required by the printer driver package"

  I have a Brother MFP 2820 it is USB and it works very well.

  Any help would be greatly appreciated

  Try HP Print and Scan Doctor
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

• software for the printer driver does not install

  My printer is C7100 all-in-one.  My OS is windows 7 - message comes back "could not install any software.

  I recommend traverse "Programs and features" in your control panel and manual uninstall of the printer, then shut down and restart your computer. If the files do not uninstall, then you can have a deeper problem with your operating system.

  Once the software is missing, try again after the above link and by installing the full setting software.

  Let me know!

• installation CanonCP800 says driver is not installed

  I am trying to connect the Canon Selphy CP800 photo printer to my computer via a USB cable. He tells me that it can not install. When I troubleshoot it, it says, "the CanonCP800 driver is not installed. Install the latest driver for the device. I click on 'Apply in trouble', and he said to me, "CanonCP800 is not a pilot." I don't know what that means. Is there a way I can connect photo printer to my computer so I can print photo turned the computer off?

  You have the right drivers W7 for it? (32 bit or 64 bit depending on your OS)

  Usually best to check with the manufacturers - http://www.canon.co.uk/For_Home/Product_Finder/Printers/Direct_Photo/SELPHY_CP800/#p-specification (UK) Web site

  Of the foregoing:

  I think these are the ones (32 bit) - http://software.canon-europe.com/software/0039222.asp or (64-bit) - http://software.canon-europe.com/software/0039223.asp

• MSM7x27 (Samsung GT-S5830) driver is not installed on windows 8

  I have recently upgraded to windows 8 (64-bit) on my computer... Maybe it's a bad blow but anyway...

  As the title suggests, the drivers of my Samsung GT-S5830 work well with windows 8... the MSM7x27 driver is not installed by windows 8... Unlike windows 7 (64-bit), it is automatically installed on it... even without the driver installation files. I even tried to install the driver files in windows 8, but no luck, instead of MSM7x27 as the name of the driver, it will show unknown device... and yet windows does not detect my phone
  PS. Windows doesn't detect my phone when it is in download mode (Android)
  Hardware ID:
  USB\VID_04E8 & PID_6601 & REV_0100
  USB\VID_04E8 & PID_6601

  wait!, I found the driver here: http://downloadcenter.samsung.com/content/SW/201306/20130610184736640/SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.25.0-retail.exe

• «The video add-on drive could not install: impossible to validate the license online.» How can it help me? I tried the Extension handles CC too. But no success.

  «The video add-on drive could not install: impossible to validate the license online.» How can it help me? I tried the Extension handles CC too. But no success.

  This error indicates usually that one of the following problems:

  • You are not connected to Creative CC Cloud Desktop App and/or Adobe site with the same Adobe ID modules.
  • More than one user is logged in your Adobe software on your computer using an Adobe ID different from yourself, or indeed you have more than one Adobe ID that you used to connect to and the license file is damaged.
  • You are behind a firewall that blocks our license server calls.

  Please first make sure that you are connected to the Adobe website modules (top-right) and the desktop application CC (high button on the page of good settings, preferences, account) with the correct ID. If you are, then next steps are please uninstall and reinstall the extensions, reset between Manager.

• Cannot install the video driver intel

  When I install windows 7 32-bit and started driver intall ti doesn't have the video driver installation intel and this error msg appear, someone help me please

  laptop: hp probook 450 G1 core i7

  

  Hello:

  Then you install only the AMD driver that installs the drivers for the amd and intel gpu.

  Impossible to install the stand-alone intel graphics driver or allow windows update to install either or switchable graphics do not work.

• no disc in the drive? And file is not supported or the required codec is not installed?

  I have been w work on a project for over 6 month. yesterday, it would not open. First he asked me to point to the location of the video files for 18 files I fortunately work for the last 6 months, and then once I went that it gives me the message:

  ' There is none in the hard disk drive. Insert a disk in the drive\Device\Harddisk2\DR2'

  .. .and constantly stopped upward when I tried to ignore or Cancel to exit (forcing me to go to the Task Manager to close items).

  I should point out that I have worked off the coast of files stored on an external hard drive of 1 terrabyte. However, I am still able to view and open all the ext HD files in Windows Media Player, etc. which eliminates me the idea of a problem with the drive.

  I can open a new project and add the same file/s (first few files for a test run). Following its telling me

  "This type of file is not supported or the required codec is not installed."

  .. .but it worked just the other day, so it IS supported and must have the required codec.

  Moved some files on the hard disk of the PC. Seems to work ok... take back me to the fact that the external hard drive can be a source of the problem, but I can open all the files there in all other programs... so you have PE? Or is it?

  I can't find any similar link on the forum... but if anyone can help or have any suggestions I'd appreciate your comments! See you soon

  Gila Valley,

  Welcome to the forum.

  Can provide you details of your system, your project and your source files?

  It may be best to start a new thread to do this, so that zero confused between your questions and the OP also, since this thread has been marked as answer, many people eventually spend on watching and miss your problems. The more eyes on a problem, the better.

  I would like to look at this ARTICLE for suggestions on the types of information that would be so useful.

  Then, if you collect this info, take a look at this ARTICLE to settle pre, your operating system and also the computer.

  Good luck and thanks for this info,

  Hunt

• Dell Optiplex PC 390: the driver for the PCI device is not installed

  In "Devices and printers" my desktop unit shows a yellow triangle with an exclamation point.

  When I click on "help" I get the message "PCI device driver is not installed. When I try 'apply this correction', nothing happens, it retains only the search.

  I've read to go to "Control Panel > Device Manager" and click on the part of the problem, then click on "Details > hardware ID" and I get the following:

  PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4 & REV_00

  PCI\VEN_1FD4 & DEV_1999 & SUBSYS_01011FD4

  PCI\VEN_1FD4 & DEV_1999 & CC_070800

  PCI\VEN_1FD4 & DEV_1999 & CC_0708

  I don't know where to take from here. Can anyone help?

  Thank you

  Kathy

  Hi, Kathy:

  Here is the link for the driver you need...

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=DMD90&FILEID=2967023673&osCode=W764&ProductCode=OptiPlex-390&LanguageCode=en&CategoryID=cm

  For later use, there is a Support Forum of community Dell for Dell desktop PC.

  http://en.community.Dell.com/support-forums/desktop/

• Network driver is not installed and have no option for the wireless

  Hello

  My network driver is not installed and I have not listed in my device manager wireless driver. For this reason, I am unable to connect to the internet.

  I've seen previous posts that you need network controller ID for this problem, they are:

  PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C & REV_01

  PCI\VEN_168C & DEV_0036 & SUBSYS_18E3103C

  PCI\VEN_168C & DEV_0036 & CC_028000

  PCI\VEN_168C & DEV_0036 & CC_0280

  Excuse my lack of knowledge in this area, but how to download new drivers if I can't get an internet connection.

  Appreciate your help.

  Best regards and thanks,

  Jeff.

  Hello

  Please try:

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63802.exe

  You also have the following for Bluetooth:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64678.exe

  Kind regards.

• Windows Media Player error "cannot play the file because the required video codec is not installed on your computer.

  Original title: Windowo Media Player error

  Why do I get an error whenever I try to view a video WMV?

  Here's what he said:

  Windows Media Player cannot play the file because the required video codec is not installed on your computer.

  Is it really not installed? I double click on the video on other computers and it works fine.

  Please advise...

  Thank you

  Martin Adam

  http://www.filehippo.com/download_klite_codec_pack/

• Windows Media Player cannot play the file because the required video codec is not installed on your computer

  Windows Media Player cannot play the file because the required video codec is not installed on your computer

  can help me is it you pls with this.i am unable to find.where can I download codec windows media player video

  There are many video codecs out there. What is the suffix (.xxx) on the video you are trying to play?

• Impossible to play a video file, error: Windows Media Player cannot play the file because the required video codec is not installed on your computer.

  I am unable to play the video file and get the error "Windows Media Player cannot play the file because the required video codec is not installed on your computer."

  Can someone help me how to solve this problem. Thank you

  I am unable to play the video file and get the error "Windows Media Player cannot play the file because the required video codec is not installed on your computer."

  Can someone help me how to solve this problem. Thank you

  May be that the video file format is not compatible with Windows Media Player.

  Options: -.

  1] download and install VLC Player. It's free and supports file formats more than WMP.

  2] download and install the codecs

  Personally, I prefer VLC Player-if you have that then not need to download and install the codec of any third party.