The video is cropped with cache by changing size to export approach?

Similar Questions

• Is it possible to play or pause a video by clicking on the video itself than with a set of the command bar and stop buttons?

  Is it possible to play or pause a video by clicking on the video itself than with a set of the command bar and stop buttons? If Yes, how can we do?

  When you set the video object, just add a listener for events such as:

  myVideo.addEventListener (MouseEvent.CLICK, toggleVideoPlayback);

  private void toggleVideoPlayback(e:MouseEvent):void {}

  If play, pause

  If in pause, play

  }

• Tried to replace the video card integrated with card pci-e x 16 and lost audio - help please

  Is this normal - when you replace your car video with a pci-e video card you would lose your sound.  The system I have is a Pavilion a1450n and has 3 pci slots and 1 pci-e.  I changed the pci-e video in the bios and everything is fine, but no sound at all.  When I took out the card then I would sound.

  Please help.

  The former system of video seems to give me a little trouble.  He keeps hide and freeze from time to time.  Don't know when that will happen.  But when this happens, a blue screen it freezes or just blanks out and comes back.  It will happen nobody knows.  Everything else works fine.  Hate to give up this old gem - for a lot of software installed to lose.

  Thank you all very much for help.

  William

  Hi, William.

  Yes, when you have an old PC where the BIOS does not have HDMI.

  Your PC thinks that you have installed a sound card and a video card because of the HD audio chip on the video card.

  Thus, he disabled the integrated audio system.

  The fix should be easy...

  Go into the BIOS of your PC, look at the options menu and find the onboard audio setting.

  It will be set to auto or off.

  Change the setting to "Enabled". Save the configuration it and yet when you go out (save the settings and exit).

  When you restart, you should have the back of Board.

• MKV files can be recognized by WMP 12 video in the video library, do not help registry changes.

  It is a problem I've had for a long time.  I'm trying to share content and encoded in H264 and AVCHD videos in the video container Matroska (MKV).

  Currently, the MKV files in folders assigned to the 'Vidéos' library are listed in the folder 'other media '.  Windows does not share the folder/library / "in other media" via DLNA or home group streaming...
  Thus, these MKV files can be shared via the Windows library system;  Even another computer (not a "device" like a cell phone) or a TV can not see it this way... Only via the standard file sharing and printing.
  I went to this for awhile, and I tried the following: d

  (1) Yes, I have the codec.  the files play fine in WMP.

  (2) Yes, I have FFdshow and Haali media splitter/Matroska splitter

  (3) Yes, I changed the registry by using the following:

  Windows Registry Editor Version 5.00

   

  [HKEY_CLASSES_ROOT\.mkv]

  "PerceivedType"="video".

   

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Multimedia\WMPlayer\Extensions\.mkv]

  "PerceivedType"="video".

  'Permissions' = dword:0000000f

  "Runtime" = dword:00000007

   

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\MLS\Extensions]

  "mkv"="video".

  (4) Yes, I followed the procedure in the first answer on the following page:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-cant-get-WMP-12-to-automatically-find-MP4-files/68a04456-089d-4181-a7c9-db8a1e313d7e

  (delete the database in memory inside the localappdata folder)

  (5) Yes, I tried to activate the function that adds the files recently played at the library...

  I am trying to share these MKV files without having to spend hours and hours demultiplexing and Remultiplexage or (worse) flows of reendoing cannot be multiplexed to MP4...

  I must say, if Microsoft does not support the MKV, which is the only answer for why these files are not supported natively, by 2013 while they are busily flipping through their nose to their most loyal customers.
  Some people have had better luck with shark 007 codecs
  http://Shark007.NET/win8codecs.html
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• HELP: When I export and play the video, the video is 'cropped '!

  Hallo

  I really need help and I would greatly appreciate if someone could help me.

  Where to put my clips in first Elements 8, are looking for fine but when I export him are "cropped" and are not played in 'full screen '. That's how the video looks like: http://www.youtube.com/watch?v=DpyEHqpEj7E

  I tried to export to SEVERAL different formats and other things, but none of this does not work. Is there som settings wrong or...? in the recording, editing or exporting?

  I hope understand you my crap English and will try to help me.

  -Stefan

  Start a new project in Premiere Elements.

  Before saving the project to a folder, go to settings and select the project settings for this camcorder.

  You have to shoot in full HD or full EN in order to use this video in first Elements 8, and then select the project preset for 1920 x 1080 AVCHD stereo.

  If you do this, your video should change quite effectively in Premiere Elements and your output, using one of the presets hand standard, should not appear cropped.

• How to read the video stream directly with Flex?

  I'm trying to get Flex Builder 3 to play a video stream with Flash Media live
  Server and Flash Media Live Encoder.

  I am able to stream pre-recrorded (VSD) files in flex FLV go the Flash media server.

  I am able to stream live using Flash/FMS/Flas Live Media Encoder, but do not
  with Flex.

  This stream of video on demand flvs, but not live streams prerecorded code:

  If I change the source to 'rtmp://localhost/live/livesream.flv, I get nothing.

  What I am doing wrong?

  <? XML version = "1.0"? >
  <!--controls\videodisplay\VideoDisplayFMS.mxml-->
  "< mx:Application xmlns:mx ="http://www.adobe.com/2006/mxml">".

  < mx:HBox >
  < mx:Label text = "RTMP FMS 2.0" / >
  < mx:VideoDisplay
  autoBandWidthDetection = "false".
  source = "rtmp://localhost/vod/Legend.flv" / >
  < / mx:HBox >
  < / mx:Application >

  Oh and sorry for the double post. I didn't know there was a separate instance of the FMS.

  I use the video display component, but there is no "on-line" property. Try what setting to true. If it still does not work, try to remove the name of the stream of the .flv extension.

• BlackBerry Smartphones Sure would like to watch the videos I took with my phone on my PC.

  Do anyone know where to get the software so I can watch videos that I take with my 8330 on my PC? I have windows XP and apparently he won't play 3gppfiles. I would have that no matter what software I needed should have been included on the CD-ROM supplied with, but I do not. I really don't want to have to pay for it either because, in my opinion, he should have been included. Help, please?

  A program called VLC will these files correctly, even if they may seem small

• My audio does not sync upward with the video when editing... no not after have exported them.

  So, I use Adobe first Pro CC and it's been great so far. For reason of som I get this problem a lot recently, my voice does not synchronize with the video. I use Audacity to record my voice and my recording software to record sounds in the game. My voice doesn't sync upward with the video DURING editing (no not after export).

  Also, before you save I say "3, 2, 1, record" so I can sync my voice and video, so it's not me being stupid... It is really strange.

  Any help? See you soon.

  First will not work with variable rate, you will need to use a program like Handbrake (for Windows) to convert the first.

• Problems when you use the video plugin cured with Premiere CS4

  Hello

  I encounter this problem now for some time and I can't tell what I am doing wrong or what I missed in the process.

  I am trying to remove noise and grain of old records and neat video made this same success. The problem is that I get a distorted on bodies in motion. I have attached the screenshot how it looks like (look at his hand).

  

  The original video is NTSC DV 720x480px 0.9091 pixels format. When the video renderer, I use square pixels because these videos are intended for the screens of computers (through videos of members on our site).

  Other than that, everything is fine.

  I would appreciate your help and advice on what I can do to get rid of this distortion.

  Thank you

  Carpet

  Mast,

  That looks like the classic Interlacing artifacts and usually a problem of reversal of field.

  I use video Neat often and with hardware DV - AVI, without all these questions. Now the DV - AVI on DVD and not progressive, as I assume that you are. I would check the order of the fields, to see if there is a problem.

  Good luck

  Hunt

• The videos are jerky with FMS 2.0

  I use FMS 2.0 for videos. It works fine on my computer, but a lot of people complain about the videos are choppy.
  
  This is the web page - http://www.ncswlearn.org/components/videos/?id=33 are the videos jerky for you? If so, what is your internet connection and how much RAM do you have?
  
  Any other ideas for what could cause this and how can I solve this problem? Thank you! Any help / answers is greatly appreciated.

  What I am getting, it's how much bandwidth is available on the server. Assume that the server is connected to the internet via a T1... that gives you 1.5 Mbps. also assume the video is encoded at 500 Kbps... that would mean you can't support 3 simultaneous viewers both before, it is short of available bandwidth. When the 4th viewer connects, the server bandwidth will be contributed to the maximum, and video will get hectic for everyone.

• problems with quality vs. file size in export to YouTube 1080 p

  Hello

  I used to use NCH videopad as a Publisher began. He had shocking performance but gives really good quality and small size files.

  That is to say, I could export 1080 p 30 min video of good quality for YouTube in less than 2 GB file size, but Premiere Elements can

  Get anywhere near the same quality, even at 4 GB.

  So what I need is someone to tell me the parameters I need.

  Currently I export the shadowplay film recorded in 1080 60 fps 50Mbits (according to shadowplay).

  If I export to AVCH (whatever) with YouTube Widescreen HD - set it to match the source, I can't

  get a good quality. I even put the target at 20 and the other at 18 and it is still grainy quality and file sizes

  4 GB. The only way I can get the same quality I received of Videopad is with a 7 GB file into elements.

  Today I tried to export a video (30 minutes) and all day trying to find a good setting, and

  each parameter gets me grainy footage.

  If someone can you please just give me the detailed settings, I need (without the jargon) please.

  The problem is with file sizes as what he deletes my additions to my half a string because

  limits on usage of my data.

  Thank you

  NeonsStyle

  corn

  I think that you need to remove temporarily and advanced then refreshed. Then go through the following.

  The first link in your last message does not, but that a second was full of information (really great).

  If this is supposed to represent the output of VideoPad, here's the story.

  1. you have an AVCHD.mp4 file MPEG2.mpg is not. The file is 1920 x 1080 @ a progressive frame.

  2. our goal is progressive rate - variable and not constant, noted that the 3 frames rate in playback of video properties...

  minimum frame rate = 10,000 frames per second

  frame rate = 29,888 frames per second

  maximum frame rate = 30,000 images per second

  First Elements not managed well with the video recorded with a variable rather than a constant rate. Symptoms range from Premiere Elements of audio desynchronization to not being able to import the video at all. The typical remedy is to take video in the free program of brake hand to get the H.264.mp4 with constant frame rate (29.97) model. Then, you take the export of brake hand in Premiere Elements project using first elements add Media/files and folders.

  https://handbrake.fr/

  Also note that VideoPad product export with a low flow, i.e. 7759 Kbps (equivalent to 7.7 Mbps). You were trying for 36 / 50 Mbps in the export of Premiere Elements. It is an explanation of the difference in size of the files that run you in your comparisons of software.

  Since you don't seem to be involved with video MPEG2.mpg, I write what follows for information purposes... What do you do with an xml file if you used the 1080p29.97 HDTV high quality predefined with Publish + share/computer/MPEG? You should get a single file, MPEG2.mpg. If you use one of the presets whose name begins with MPEG2 (interlaced preset who is not progressive), then you will get two files, the video file and a file of information m2t.xmlses. Nothing to do with the xml file. All you want is the video file that will be MPEG2.m2t.

  Right now I'd take that video in Handbrake for 1920 x 1080p29.97, like H.264.mp4, import this file in Premiere Elements, export as a AVCHD.mp4 MP4 H.264 1920 x 1080 p 30, get a core file line with default transmission speeds and, if necessary, start to lower the bitrate to 8 Mbit / s by looking at the quality.

  Please consider.

  Thank you.

  RTA

  Add on... If you need a how tos tos for handbrake, let me know. It is quick and easy with the adjustment under video tab key.

• Running on the video line basic VGA screen display changes.

  Sometimes, when I discovered an online video like you Tube etc... the screen goes to a very basic VGA mode and I have to manually change the screen to its normal parameters. How can I prevent this from happening. I checked for updated drivers, and mine are currently being updated. I'm running a Toshiba laptop Satellite 115-S103 with Windows XP Home Edition SP3. Thanks in advance for the help.

  http://get.Adobe.com/Shockwave/ Make sure you have this and if you do not download it. Several youtube videos are created using Adobe Director and require shockwave to view properly.

  http://get.Adobe.com/flashplayer/?promoid=BUIGP  You already have flash youtube if you would've said but make sure you have the latest version.

• Resize the video after cropping?

  I would like to ask if it's possible/how change video size to our point of interest after cropping?
  What it looks like...

  

  Its 480 p and I want to make without these black boards. Im sorry total beginner

  After cropping, nesting the clip and use the movement built on the new nested sequence controls. Or scaling the image and then crop.

• Clean the video folder Lightroom user cache

  Hi everyone, I tried to make the free space on the hard drive of my computer when I discovered that my "user/username/Library/Caches/Adobe/Lightroom/video/MediaCacheFiles' was containing more than 100 GB of data.

  I intend to erase these data in order to save space. Is it safe? I think that these data are used to get a quick view in Lightroom (in grid panel) of the different video files that have been imported into my Lightroom library. I kind of never to use LR to manage or preview my files video (first is more efficiently, besides) I don't need these very heavy additional files to share my disk space.

  Can you tell me that I can do it without problems?

  Thank you

  Tristan

  Lightroom CC 2015.3

  MAC OS 10.9.5

  Hi MonPortraitPhoto,

  Could check you what is the space allocated for cache Lightroom video.

  Check under Lightroom > preferences > file management

  Also click on clear Cache in the cache of video settings.

  

  Let us know if that helps to clear up space on your computer.

  Kind regards

  Assani

• Expand the video or HTML with DPS

  I'm looking for a way with DPS to have an item on a page, and when you click it, it expands to the size of most of the page (screen). For example, when you make an interactive PDF in InDesign, you can add a movie and be the size of an icon. It configure you in media settings, when you click on the movie, it grows to the size of the movie. I would like to do with the web content as well.

  I don't want to use all the space on the page for the original size of the content web/movies, so this works very well.

  Does anyone have any advice on how I can accomplish something like that with DPS?

  Thank you.

  
  Dave

  Use a MSO. Put web content in a State of superposition and the button to go to that State.

  Bob