Running on the video line basic VGA screen display changes.

Similar Questions

• The letters on my keyboard on the screen are passed. that is the A is now in the first row of letters, the M is in the middle line. How can I change?

  The letters on my keyboard on the screen are passed. that is the A is now in the first row of letters, the M is in the middle line. How can I change? I don't know how he has changed as a first step.

  Try the settings > General > keyboard > English > typing on the QWERTY keyboard. -AJ

• Analyzer of sequence running from the command line in TestStand 2010

  Hello

  I would like to be able to run and control the stand-alone command line sequence Analyzer.  I can do that in 2014 TS (and it seems that I could patch versions as soon as 2012 TS to give them this ability), as described here: http://digital.ni.com/public.nsf/allkb/B927893F26BFB64A86257ECE006E442D

  However, I work with a large existing codebase in 2010 TS (with no intention to migrate to a newer version, in the foreseeable future).  Is it possible to get the same functionality from command line in the 2010 version of the parser?

  I know that I can open the command line parser, but are the commands, I am interested in: analyze, report, / save, /clearMessagesOnSave, / minimize, / help, / / leave.

  Thank you!

  Thanks Ryan, Jigg,

  Yes, I can run the parser (and opened a project), but basically, I can't run anything.

  I realized what I do by writing a TestStand sequence that calls the parser to sequence through its API (attached).  I can then run TestStand (and call this sequence) from the command line.

• Reinstalled Windows and can not get the video past standard vga

  I had to reformat my hard drive on my Studio 1749 and reinstall it from the disk operating system (which seems to have only the standard drivers on that).  Then, I went to the page of Support for drivers and installed the wireless lan driver and video driver.  But when I try to adjust the screen resolution, the only option for display is generic pnp monitor on standard vga adapter.  How can I get that back at the higher resolution and it supports?

  Thank you

  Dan

  First thing to do is determine whether you have an Intel or ATI video (BIOS - F2 at startup screen - will tell you).

  Make sure that you have installed the Dell system software

  www.Dell.com/.../Studio-1749

  Then install the video driver.

• When I plug my webcam and open Skype and try to start the video my computer blue screens, BCCode: d1

  I have this problem when I plug in my webcam and Skype open and try to start the video my blue screens, the info is shown after restart. My system is Vista Edition home premium 64. I find it more frustrating to have bought a new webcam as I suspected wrong a man!

  Does anyone have the answer?

  Bob

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  More information about the problem:

  BCCode: d1

  BCP1: 000000000000000A

  BCP2: 0000000000000002

  BCP3: 0000000000000001

  BCP4: FFFFFA6006555AA2

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\Mini051112-02.dmp

  C:\Users\bob\AppData\Local\Temp\WER-63586-0.SysData.XML

  C:\Users\bob\AppData\Local\Temp\WER1D6E.tmp.version.txt

  Read our privacy statement:

   http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Thanks, but I have resolved the problem with the help of the forum, it was caused by the presence of old webcam drivers corrupted in the registry

  under

  HKEY_LOCAL_MACHINE, expand SYSTEM , expand CurrentControlSet , Control , class

  Then, in category, click on {{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}}

  Once I had deleted the value contained in the upper filters all then worked.

  Thanks again

  Bob

• Upper half of the video is missing (black screen) - Help!

  

  I work with Adobe Premiere Pro CS6 and I installed updates. This is my first time posting and I only use CS6 for a few months so I'm still a beginner. That being said, here's my dilemma: now half video missing one superior project I worked on yesterday without any problem. I didn't have a problem before and it's the first time I'll have to deal with that. For some reason, the problem is only occurring when I use of files larger than 1 GB. When I switch to a low quality video file which is 160 MB, for example, I don't have the problem of lack the upper half of the video. I also tried export to see if the problem is corrected during the export process, but it will also be released lack the upper half of the video.

  Any help would be greatly appreciated. Thanks in advance.

  Marisela

  We had exactly the same problem in our software.  We have reduced to updates of windows under MS technology MS13-057.  Specifically, on kb2834904 XP and windows 7 kb2803821.

  For us, it happens when the decoding of WMV9 files.  Not all uses of decoding WMV are affected, but I have confirmed that when linking the WMV decode DLL to a sample for RGB32 video grabber, executives are black on top, so that points directly to the internal data of the dll to decode WMV decoding.

  You can uninstall these windows updates to fix your problem.  I hope that Adobe can join Microsoft to fix this properly as soon as possible.

• MKV files can be recognized by WMP 12 video in the video library, do not help registry changes.

  It is a problem I've had for a long time.  I'm trying to share content and encoded in H264 and AVCHD videos in the video container Matroska (MKV).

  Currently, the MKV files in folders assigned to the 'Vidéos' library are listed in the folder 'other media '.  Windows does not share the folder/library / "in other media" via DLNA or home group streaming...
  Thus, these MKV files can be shared via the Windows library system;  Even another computer (not a "device" like a cell phone) or a TV can not see it this way... Only via the standard file sharing and printing.
  I went to this for awhile, and I tried the following: d

  (1) Yes, I have the codec.  the files play fine in WMP.

  (2) Yes, I have FFdshow and Haali media splitter/Matroska splitter

  (3) Yes, I changed the registry by using the following:

  Windows Registry Editor Version 5.00

   

  [HKEY_CLASSES_ROOT\.mkv]

  "PerceivedType"="video".

   

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Multimedia\WMPlayer\Extensions\.mkv]

  "PerceivedType"="video".

  'Permissions' = dword:0000000f

  "Runtime" = dword:00000007

   

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MediaPlayer\MLS\Extensions]

  "mkv"="video".

  (4) Yes, I followed the procedure in the first answer on the following page:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-cant-get-WMP-12-to-automatically-find-MP4-files/68a04456-089d-4181-a7c9-db8a1e313d7e

  (delete the database in memory inside the localappdata folder)

  (5) Yes, I tried to activate the function that adds the files recently played at the library...

  I am trying to share these MKV files without having to spend hours and hours demultiplexing and Remultiplexage or (worse) flows of reendoing cannot be multiplexed to MP4...

  I must say, if Microsoft does not support the MKV, which is the only answer for why these files are not supported natively, by 2013 while they are busily flipping through their nose to their most loyal customers.
  Some people have had better luck with shark 007 codecs
  http://Shark007.NET/win8codecs.html
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• A virtual machine running from the command line

  Hello

  I installed, with an XP VPC to VMWare player.

  I would firstly the VPC via a command line instruction, but Im getting an error message when I do (so I hope someone can help me with it).

  I use the command: -.

  "" C:\Program VMware Player\vmplayer.exe D:\My virtual Machines\Windows XP Professional x"

  Windows Player Thew opens, but I get the message following up: -.

  Error when opening the virtual machine, error opening 'D:\My Virtual Machines\Windows XP' Professional: access is denied.

  The VPC opens perfectly if you start from a few players GUI.

  Please can someone indicate what mistake I make?

  Thank you very much

  Have you tried or are you, run cmd as administrator prompt?

  Also, try pointing to the file like this .vmx extension:

  "" C:\Program VMware x D:\My Player\vmplayer.exe virtual Machines\Windows XP Professional\Windows XP Professional.vmx ".

• There is a white bar on a half inch of vertical running on the right hand of my screen and it is causing my firefox malfunctioning. What's wrong?

  As the question says. The problem is that my mouse must be about a cm or 2 to the right of the icons and everything that is clickable to highlight the element and to be able to click on it. Don't know what's the problem?

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;

  Type of topic: preferences< enter > in the address bar

  Select Advanced > General.
  Find and stop using hardware acceleration.

  Search web sites secure. Are there problems?

  Then restart.

• How to change the direction of laptop computer screen display

  My laptop screen seems to have shifted from horizontal to vertical and don't know how to get back to normal.

  Hello

  This will show you how to rotate back:

  How to rotate the screen in Windows XP
  http://www.ehow.com/how_5146797_rotate-screen-Windows-XP.html

  Right-click on an empty area of the desktop - graphics Options - Rotation

  CTRL + ALT + arrow key it also runs.

  CTRL + Alt + (up arrow), Ctrl + Alt + arrow (pointing down), Ctrl + Alt + arrow (left) and also Ctrl + Alt + arrow (right)

  I hope this helps.

• Colors of the Windows 7 basic theme will not change

  HI I have a mini HP with Windows 7 Starter and when I use the basic outline of Windows 7 that I can not change the options of color... once I chose to apply color options, that I touched and I always get only the basic blues... I noticed that this kind of "flat" so

  Hello Saiajin,

  In classic Windows help, you will be able to change the colors of the active title bar, etc.

  You can experiment with different color options in the games of different colors at your disposal in order to determine the exact combination you prefer.

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The video is cropped with cache by changing size to export approach?

  Hello!   I have a video layered with a background image for the sidebars.   I used a white square as a track matte to crop a part of the Central video.

  Now, the weird thing is that the sequence is more heavily cropped in the exported file that's in my first previews.

  

  

  Because it appears perfectly fine in the excerpts, I find it very difficult to solve the problem by trial and error.   What could be the cause of this discrepancy between the previews and my exported images?

  Edit: actually, now that I'm looking at them side by side, the colors are little stripped too.  Keeps?

  Post edited by: Christopher Jacob

  I apparently solved the problem.   If someone else happens on a similar problem, I selected the matte layer and change its size through the motion effect.   I have it narrowed down and then brought back to the correct size.   For some reason any after that it has exported correctly.   Yay!

• on-screen display changed from horizontal to vertical. How can I get it back to normal?

  display went vertical instead of horizontal... back?

  Hello

  Right-click on an empty area of the desktop - graphics Options - Rotation

  CTRL + ALT + arrow key it also runs.

  CTRL + Alt + (up arrow), Ctrl + Alt + arrow (pointing down), Ctrl + Alt + arrow (left) and also Ctrl + Alt + arrow (right)

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I have one and a 5 s iPhone, videos do not show. The file looks like to only as a picture and not the actual video. Download photos perfectly. How can I solve the problem of the video? Video is on VGA is said by the way, please help

  Help

  What you trying to do? Transfer files between iPad and iPhone or what? Please give more details.

  That means "the video is on VGA? VGA is the old connector between a computer and a monitor.

  Videos on iOS Photos have thumbnails which resemble pictures with a small camera icon and the playing time. But when you click on them, they play.

• Script SQL Developer runs all the lines

  I have a group of scripts that I want to execute in the order since a main script.  I created a file referencing these scripts as follows below.  My problem is that when I run this script (via F5 or another script referencing it), it runs only the first line and stops.  I have excluded questions with my references to file by changing the order - always the first runs and stops.  I have tried such as displayed below and with a semicolon; to separate each command.  I have scoured the web and can not find any reason why it does not work.  Each of the scripts listed below contains multiple statements separated by a; that wraps a file to a NAS where he is picked up by our external file transfer program.  It all works properly - the only thing that I have problems with using 1 script to call several files and run them in order.

  Any help is greatly appreciated!

  @EMSTATUS.sql

  @EMPLOYEE.sql

  @HREMPUSF.sql

  @HRHISTORY.sql

  @HRSUPER.sql

  @JOBCLASS.sql

  @JOBCODE.sql

  @PAACTREAS.sql

  @PAEMPLOYEE.sql

  @PAEMPPOS.sql

  @PCODES.sql

  @PCODESDTL.sql

  @PERSACTHST.sql

  @PRDISTRIB.sql

  @PRPAYCODE.sql

  @PSGRELATE.sql

  @REVIEW.sql

  Hello

  Note You can place in the path: Tools-> preferences-> database-> spreadsheet-> "path select default to search scripts"

  
  

  I tried the following:

  c:\tmp\calltwoscripts. SQL

  set echo on

  @zone.sql

  @ztwo.sql

  Select 'done' double.

  c:\tmp\zone. SQL:

  Select 'one' double;

  c:\tmp\ztwo. SQL:

  Select 'two' SQL;

  executed in a worksheet:

  @c:/tmp/calltwoscripts.sql

  Output:

  > @zone.sql

  > select "one" of the double

  'A '.

  -----

  one

  > @ztwo.sql

  > Select "both" of the double

  "TWO".

  -----

  two

  > select 'done' double

  'DONE '.

  ----------

  Finish

  The things that could go wrong:

  Your scripts could end with "quit".

  Paths can mingle: try (not @) and full of paths.

  You could hit a code issue, the spreadsheet does not recover-in which case you should get the output on the command line and or Page logging of messages in the view.

  Turloch

  SQLDeveloper - team

  http://www.thatjeffsmith.com/archive/2012/06/how-to-collect-Debug-Info-for-Oracle-SQL-Developer/

  http://totierne.blogspot.co.UK/2013/07/user-check-on-sqldeveloper-worksheet.html