the VMDK files are more and more and more...

Similar Questions

• the vmdk files are compatible with ESXi 4.1 and Vmware server 2.0?

  I would like the two 4.1 ESXi and Vmware server 2.0 use the same vmdk file, of course, not at the same time just to the emergency plan. Is this possible?

  Hi Spitzmann,

  Welcome to the forum.

  Yes, they use the machine material virtual version 7. Take a look at this kb .

  Useful another link .

  Concerning

  Franck

• flying over the vmdk files after storage vmotion

  People,

  I finished a few vmotions storage and I see that there are some vmdk files left belonging to a virtual machine by flying over in the source data store.

  Storage vmotion however was very good. Time last modified files are several months old.

  If the vmdk files are old players was dismantled some time back?

  There are also a few - zdump.000 left side files in source data warehouses. should you be worried about those?

  Rahul-

  Although I suppose the files are orphans, I always double-check for use before deleting. Virtual disk file (hard) can be changed only in case Active snapshots exist for them. What you can do is run RVTools, to see if these files appear as 'Zombies' and if so, I would say you first create a subdirectory and move the "orphans" files above and - if everything continues to work as expected - delete at a later date. Alternatively you can check the vmware.log of the virtual machine file to see if the files appear here.

  Zdump files are created if something unexpected occurs. However, it is difficult to say what the brought to be created and if they are old and have any problems, you can delete just them.

  André

• Clone host (error caused by the vmdk file)

  Hello

  We try to clone the server to a scsi with resources as:

  

  
  During the operation of clone, a 'problem' error caused by the vmdk file is thrown and clone to work stoppages. Server uses thin provisioned (40 GB) and thick (250 GB) / place.

  My question is: in target store, is 579 GB free space and space end implemented is 503 GB. While cloning thick storage (250 GB), do we need at least 250 GB of capacity between space free and put into service? If this is not the case, how can I solve my problem of clone?

  Thank you for your attention...

  Yes, you need this amount of free space (at least 250 GB freespace) available between the space free and put into service.

  TM

• I tried a trial version of lightroom 6 and edited hundreds of photots I need to find the export files are small non-printable, about 600 kbs. So I bought lightroom 6 hoping to save my changes on all the photos. However with my purchase of more than a week

  I tried a trial version of lightroom 6 and edited hundreds of photots I need to find the export files are small non-printable, about 600 kbs. So I bought lightroom 6 hoping to save my changes on all the photos. However with my purchase of more than a week, my picture exports are still about 600 kbs. Not printable! I'm signed and registered. Whats happening?

  Looks like you have been in the library module and chose with a preset export or export to email. Whatever it is, your Presets 'export' were to reduce the size of the image exported to about 600 k.

  In Lightroom, the library module and under the file menu, simply select the Word Export. Who will open another dialog box. GO through each option in this dialog box to choose where you want to export the file, what color space to use, what name to give to each folder, what metadata to include and do not forget to select the export size! I included a few screenshots for your reference.

  If you export exactly the same path several times, you can create your own export preset to make this process faster.

  

• Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site.

  Jerky mouse mouseover function for all while the menu (file, options, help) and the key back/forward/home too. More scrolling is choppy every Web site since the update to version 3.6 to 4 RC1.

  Gel mouse pointer when it comes across objects that use some sort of animation or gradual highlighting when hovering on (which is basically all the Firefox 4 items menu, tabs, etc.) But also a lot of things on the Web pages as the green buttons on this page that change color when you hover over them).

  After rebooting my system, however, the problem seems to have disappeared!

  [, WinXP SP3 - 4 GB RAM, Core i5 M520, driver Nvidia NVS3100M 6.14.12.5738, Firefox 4.0]

• Message: 'Ehtray' under the (x 86) HP program files are corrupted and unreadable, run chkdisk utility

  Original title: corrupt files and running chkdisk utility

  I get a message (with the yellow triangle) that "ehtray' under the (x 86) HP program files are corrupted and unreadable and run chkdisk.  I do not know how to run the chkdsk utility, but by running AVAST on the HP (x 86) program I have ID had two "unreadable" files, but cannot delete them.  It first appeared when I installed Webshots Desktop on my laptop, but when I tried to uninstall it, it wouldn't uninstall.  My PC just guard close after having been just a short time, so I need to figure this out!  Any help would be appreciated!

  Hi mama mia,.

  1. What is the name of the HP program?

  Try these steps and check the result.
  Step 1: Restore the computer to an earlier time when it was working fine
  a. Click Start, type system restore in the search box and then in the list click on the system restore program.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  e. restart the computer and check if the problem persists.

  See What is system restore?

  Step 2: If the problem persists, then reinstall the HP program and check the result.

  You can get in touch with HP Support team for more help on the HP program.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to open streets and trips 2011, I thought that the registry files are not correct.

  HI, I keep trying to install streets and trips 2011 on my Windows 7 computer.  The installation files say it is installed correctly but when I try to open, I get an error message that the registry files are not correct. Must re-run Setup. It is a brand new program that I just bought.  What is going on?

  original title: streets & trips 2011 will not be installed. Incorrect registry problem files. Windows7

  You're more likely to get a useful response to the Highway, Streets & Trips, MapPoint Forum

  Good luck with it,

• If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with el

  If I buy adobe Elements 10 or later what software should I make the DVD to mov files, the files are large and I know they must be compressed and I don't want to lose quality... I know that adobe pro you still need software, but will still work with the elements and may itself make the compression... I know it can burn DVDs...

  vidog

  If you burn to a DVD disc in first items 10 and later versions, some choices are

  a. DVD-VIDEO standard screen or 4:3 16:9 on DVD disc

  Both will have the frame size of 720 x 480 pixels. But the big screen comes with a 16:9 flag that extends approximately 856/480 16:9 display video after encoding. The screening is not adjustable by the user... and you end up with the DVD-VIDEO format @ 29.97 images per second interlaced.

  b. format of the AVCHD on DVD

  Here is the video display 1920 x 1080. And, depending on the version, can be 29.97 images interlaced per second, or 23.976 progressive frames per second (if not just 29.97 images per second interlaced). Although you can generate some AVCHD DVD with a regular DVD burner, DVD AVCHD is in need of a blu - ray player that supports supported AVCHD DVD or one of these drives multimedia multi which is also.

  c. If the player allows... you can export your Timeline file saved on a USB Flash drive and then insert this USB Flash drive in the drive to get the reading of the file. On this route, you can set the Premiere Elements avancΘs to customize your choice of export preset.

  Please consult the bulletin and consider then, let us know if we have targeted your question. If this isn't the case, please give more details in the areas where we do not have.

  Thank you.

  RTA

• Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe.

  Original title: files missing error

  Whenever I start the system complains that the following files are missing, c:\\Windows\System32\igfxpers.exe, igftray.exe and hkcmd.exe. Everything started after I ran scan and scan deleted some files infected. However, I can use the system. Where and how to download the missing files? Or how the system does not deliver messages?

  Simon

  Two of the three files are probably part of the malware infection and not the files infected. The third is probably the same details in this link:
  http://www.Runscanner.NET/file/Hkcmd.exe.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig. You will find the three points and they will have a description 'file is missing' against everyone. Your antivirus software has removed the files, but not the startup entries in the registry. All you need to do is delete the entry using Autoruns to eliminate the error messages.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• The computer says to run chkdsk b/c the program files are corrupted. When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk. When I reboot, the chkdsk never runs.

  Original title: Program Files gone?

  Recently, I started my computer and noticed that a bunch of files are corrupt, and left most of my shortcuts.  I went into Program Files and discovered the entire file completely empty.  The computer says to run chkdsk b/c the program files are corrupted.  When I run chkdsk/r, it indicates that the NTFS is locked and I have to restart to run chkdsk.  When I reboot, the chkdsk never runs.

  My wife has all of its graduates work on the computer, I backed up since then, but I try to avoid doing a restore of the entire system.  Can you help me?

  I am running Microsoft XP.

  Sorry to hear that you are having problems with your XP system.  For XP support please visit the link below
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.WindowsXP.General

  Also, try to start the computer in Mode safe.
  When the computer is switched on 1, start pressing F8 until you get a menu of Windows startup, choose Safe Mode.

  Sounds like something important happened (corruption).  If you have important data there (for example, your wives, diploma work), I would strongly suggest taking the computer to a qualified technician so that they can recover data out of there before the drive goes down or the o/s is too damaged.

  Good luck

• Search for Windows 7 is not find, I know that the files are there and when I go into the control panel and select indexing options, it doesn't seem to work

  Windows 7 search is not finding I know that the files are there and when I go to the control panel and select the indexing options, it doesn't seem to work. I guess that's a place where the problem of index - what can I do?

  Microsoft has NO solution.

• How to plan interfaces or packages, if the files are windows and my server is AIX 7.1?

  Hi Expertise,

  I have to plan the interfaces and packages in studio ODI tends in Windows and the server is located in AIX 7.1

  While I'm with Agent to run the interface, it is been display of the file not found error. But while running without an agent he was running, the files are placed in the windows system, but not the AIX server.

  but when I put these files in AIX, I am able to run the interface with the agent. but in my scenario, the files are regardless of operating system.

  Can someone help me in the performance of the interface in which the DISHES files are in the Windows system and ODI server is IBM AIX 7.1 server.

  Please help me correct on how to program (I just calendar because, if the interfaces are able to run with agent then obviously they must provide, please correct me if I'm wrong.  ) interfaces using agent. ???

  I am very new to AIX.

  Thank you

  Shakur.

  1. Install Agent ODI on Windows Server? It solves your problem.

  2. the second way is sharing directory with files Windows OS using samba, and your agent on AIX server could take the files in the shared directory

  IBM how to export a share in Windows and mount the disk on AIX with CIFS. -United States

  P.S. I have never work with AIX, but do the same patterns on Linux

• I can't seem to edit PDF files in Adobe Acrobat, as it says the files are protected and I need to enter a password of Permissions?

  I can't seem to edit PDF files in Adobe Acrobat, as it says the files are protected and I need to enter a password of Permissions?

  If the files have a permissions password, you must know it and delete security, before you can edit the files. That is right.

• How files are disconnected and how to reconnect all the?

  How files are disconnected and how to reconnect all?

  The files are disconnected when you move, rename or delete these files (or files that contain) outside of Lightroom. Under Windows, this can also happen if the photo files are on an external drive and drive letter changes.

  If you have moved the photos, the best way to reconnect to them is to bring back them to their previous location.

  Otherwise, you must use the file-> to reconnect.