The volume of the different files in the SAME HUGE RESULTS

Similar Questions

• compare 2 files for the same, but different

  I have 2 files TrueCrypt 7.1 Mac OS X.dmg and TrueCrypt 7.1 Mac OS X (2) the .dmg that compare with hash sha256 identical (04db58b737c05bb6b0b83f1cb37a29edec844b59ff223b9e213ee1f4e287f586) and compared with the help of the cmp command. The two compare properly.

  When I try to install 1 file I get the message "error truecrypt requires Mac OS X 10.4 or later", but the other recipes to install correctly. Why, if the files are the same?

  The problem was with the security and privacy settings. Because Truecrypt is not an application recognized by Apple, it concerned differently for one file on the other. I suspect because I had already tried to install the previous file.

• 4.3 pages: how to print files of different text on the same page at the same time?

  This concerns 4.3 Pages, I prefer.

  I have written two different books, both with notes - one with a lot of notes.

  I would like to print them both, at the same time, on a single page legal-size, 8 x 14. I can get.

  I did this time in divvying up toward the top of the page itself and by running the paper into the printer twice - once for the top the half and, again, once for the lower half. It worked very well... but my printer is becoming tired! (former HP).

  Recently, I tried to print the most complex book on top, with all the heavy notes, in a 'box' above. I managed to get this set only to discover that you are unable to print notes in a text box! Curses.

  Unfortunately, through the raggedy of the time evolution, these books are more than a length. However, I know that I can squeeze and tweezers to them by giving them different sizes and depths of the page. Certainly, foreign and unknown.

  Why the question is: is it possible to print simultaneously two different files (texts not only) on the same sheet of paper? Each of these texts has notes.

  Hi aws.

  4.3 pages. It will work for you?

  

  A single page with two columns

  

  Insert a column break between the two versions. Notes appear on the same page.

  Kind regards

  Ian.

• Why the same photo's file size different in Photos and in the Finder?

  I have a photo size 4608 x 3456. When I open the file information in the Apple's Photos app, it says that the file is 7.8 MB. When I open the same photo in the Finder and look at the news file, it is said that it is 3.1 MB on the disk. Why does this happen? All other metadata is the same in the pictures, Finder, Lightroom or Photoshop, but I can't understand why the file size seems to have changed since I dragged photo pictures to the Finder.

  Thank you.

  How you view the photo in the finder (you shouldn't be messing around inside the photo library)?

  If you export or drag / drop you create a new file with a different compression - using export allows you to control what

  LN

• Can't see the different files open at the same time

  Hi all!

  I have this serious bug which is very difficult to describe... I'll use a picture to explain it better.

  Normally, it is possible to open different types of files on the same desktop and see them at the same time (such as writing on a file texedit during playback of a PDF one), but unfortunately whenever I click on the pdf file, the text disappears and vice versa (see figure 1 and 2 - in figure 2 the normal desktop would show two files not only one alone).

  

  

  This bug is not related only to these types of files... It also happens with files, images...

  I remember this strange behavior began after an update of Snow Leopard, continued after a clean installation of Lion and the following improvements (Maverik and, now, Yosemite).

  Accordingly, also mission control is affected as you can see on picture 3 (in the upper part, you should see two documents open, not one).

  

  I looked for a similar problem anywhere on the web, but I couldn't find any solution.

  Thank you all!

  Try going to your Preferences Library home folder and the removal of com.apple.dashboard.plist, com.apple.desktop.plist, com.apple.dock.plist files. It will recreate it.

• automatically load the different files.txt

  Hello

  I have an app that loads a file.txt previously created by a user... When the user lanuch of VI application ask the path of the file to load!

  This user can create various files that configure the various points for his test...

  What I want to do is launch the app and be able to load different files without having to ask the way once again automatically!

  For example, the user create 4 files (point1.txt, point2.txt, point3.txt & point4.txt) my application could support only a single file, but I want to make a loop which allow the user to define the test sequence: point1.txt for 1 minute then point3.txt 2 minutes... etc...

  Thanks for your help

  
  

• How to save pictures from different files in the order in which I've rearranged?

  I moved pictures of several different files in a new folder.  How to save the in the new order, that I want what they?  They keep returning to their numerical order.

  The contents of the file can only be sorted by name, date of creation, file type or file size.  To put them in order, you need that you probably need to rename them.  Try adding 01 at the beginning of the name of the first file, 02 for the second, etc.   (If you have more than 100 then use 001, 002)

• Trying to clear up the questions of the AA: E200 & Fuze different files?

  Just to check before doing something like throwing a sansa against the wall...

  I try to get my Art of Album appears in my 260. I drag & drop my files into it. Do not use anything to synchronize with. I use the same settings for my Fuze & have no problem. But with the 260, I get nada showing if I rename the files to the Album Art.jpg folder.jpg.

  Is this good? Both players recognize different file names? Do I really need two different versions of my album art to see on these two players? Please tell me I'm missing something very basic here. If not, does anyone know an EASY way to package, rename the files?

  E260 V1/Fuze V1 - the two Rockbox running.

  Thank you.

  I got that cleared up, I think. Don't know what the problem was, but I re-installed RB from scratch, and now all the art appears. Puff. Thanks for the help, anyway.

• I have two different file names, but the files inside of them are exactly the same

  Hi all

  I was running a double Finder folder.  I realize that in my Directory user (c:\users\myname) there are a few paths to the same folder, but referred to by different names.  One of them is C:\users\myname\AppData\Local\ the other folder is C; \users\myname\Local Settings.  Both of these 'files' link to the same files on the hard drive.  The double file Finder think that these files are duplicated because they seem to be in different folders, but they are in fact the same files singled twice.  The C:\users\myname\Local settings directory has a symbol that looks like a shortcut, but it does not behave as such.  There is no way to remove it without deleting the file in the other folder.

  Is a problem in the file system, or is it simply one of the oddities that I should just ignore?

  Thanks for any help

  It is a feature of the NTFS file system. Vista uses in several reasons such as compatibility.

  • http://msdn.Microsoft.com/en-us/library/aa365006 (v = VS. 85) .aspx
  • http://en.Wikipedia.org/wiki/NTFS_junction_point
  • http://en.Wikipedia.org/wiki/Hard_link
  • http://blogs.technet.com/b/joscon/archive/2011/01/06/how-hard-links-work.aspx

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• How can I transfer files between different users on the same computer

  I set myself upward under a different name on my laptop father but necessary for the transfer of files from the original user (IE my father'd Office) to my new! How can I do this?

  The following instructions assume that you want to have two users on the computer and you do not want to move some files from one user to another user.  If this isn't the case, skip the following and post a reply.

  If the above assumption is correct, log in with administrator privileges or the user who currently owns the files and click Start > computer (in the list of the menu Start right under Documents, photos, etc.) and in the computer, double-click the drive where the files are located and then double-click on the 'Users' folder and double-click with the record of the original user and work your way to the files you want to move.  Leave this window open (and possibly drag it to the right of your screen until the mouse touches the edge and it automatically resizes to fit the right of your screen or you can resize it manually).  Then repeat the same instructions (start > computer, etc.) but the second time, when you open the 'Users' folder, navigate to the new user.  The two windows open you can now drag files from one window to the other.

• Cannot delete the file and the error is "the specified file is not valid or too long." Specify a different file name.

  Hello

  I have filenames with weird values inside (created by Application software).
  Here is an example:
  GIBtmpphoto0_11:27:16.145.png

  When I try to delete it, I have the following error:
  The specified file is not valid or too long. Specify a different file name.

  And it takes a lot of space in my hard drive.

  How is it possible to remove it?

  Thank you.
  Best regards
  Marc

  Original title: delete files with weird names

  Hello

  My corrupt files are found on a disk of material on my computer.
  I have re-formatted the full disk to remove these files.

  Best regards
  Marc

• A target table is in charge of two different sources but the same columns, but a source is one database and another in a flat file.

  We all hope you are doing well.

  I have a business problem to implement in ODI 11 G. It's here. I'm trying to load a target table from two sources that have the same column names. But a source is to the file format and the other is in the Oracle database.

  That's what I think I'll create two mappings in the same interface by using the Union between the sources. But I don't know how the interface would connect to different logical architecture to connect to two different sources.

  Thank you

  SM

  You are on the right track, all in a single interface. Follow these steps

  (1) pull model of your data in the designer of the source file and your table model target to the target pane.

  (2) all relevant columns map

  (3) in the source designer to create a new dataset and choose as the UNION join type (this will create a separate tab in the source designer pane)

  (4) select the new dataset tab in the source designer pane and pull your source oracle table data model in the designer of the source. All columns that are relevant to the target card

  (5) make sure that your staging location is set to a relational technology i.e. in this case the target would be an ideal candidate because it is where the ODI will organize the data from source two files and oracle and perform the UNION before loading to the target

  If you want to watch some pretty screenshots showing the steps above, take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

• Same colours appear different on two work plans of the same file!

  From a model of Illustrator, I create a trifold brochure. I used the work same exact and copied and pasted page 1 (outside) on page two (inside). The colours are pantone and the document is set to CMYK. But when I export to PDF, for some reason, on page two colors appear brighter on the screen colors on page 1. I am totally confused, I checked and double-checked the color in place, used my dropper, everything. When I print on a model on my ink jet, everything seems to print perfectly - all colors are the same. I'm terrified to send this to print! Help!

  Page 1:

  

  Page 2:

  

  Mac OS X.X.5 Yosemite, Illustrator CC

  When you say "a page and not another", you mean different documents or even different document plans work?

  If the same document, try this first: open the color chart > select all unused colors, and delete them. Then, open the swatch (s) of remaining tones and make sure they are all CMYK.

  Then select all and flatten transparency. At this point, you should have a file have fairly clean. In addition, if you have used any fake envelope but did not yet develop, you can have an element RGB hidden somewhere in there.

  But the effects can be a problem. I never use one of the 'Photoshop effects' (binary). Dangerous stuff if directs you to a printing press.

• The different poses in the same psd file store

  Hi, I imported a character of fuse for Photoshop - now my question is: how to back up different poses for the same character?

  I watched layers, but it seems that this would require duplicating all active 3D - which means that I would not be able to update the character and then export it in different poses, I have set myself.

  After trying, it seems not possible to update a fuse character and these changes appear in Photoshop. I get another file with the same name in the library. Apparently the fuse does not recognize when there are two files with the same name and it seems not to be a dynamic link between the fuse and Photoshop. Perhaps there is a function in Ps similar to the function of sequences to replace or recharge in After Effects, but I don't the have not found.