The wait for the customization of the vm finish

Similar Questions

• Stuck "waiting for the printer to be available."

  After initially looking at it's going to print, the printer dialog box displays "waiting for printer to be available" and it's there (even if the printer - inkjet HP series C3800 - is ready).

  Here is what I tried:

  Using the HP utility software on the same computer, I am able to successfully print a test page, which rules out a problem with the printer and its connection to the computer.

  Printing worked normally before moving on to the Sierra. I tried resetting the printing system and add new printer (Sierra recognizes very well). I also tried to run in case disk utility have a permissions problem.

  I'm stumped at this point. Help much appreciated.

  Same story, but with a HP Laserjet P3005dn, specific scenario, the exact symptoms, exact attempts to improve...

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• Still waiting for the new Satellite U840T-102

  We sent the laptop in the subject to support Toshiba in Italy on 5 May. File n. 73040100. After a few emails June 20, we received the proposal to change the product and sending us a new.

  We have NOTHING yet. Our clientele is more waiting for two months for a WARRANTY SERVICE.

  Is this right? It is the policy of TOSHIBA?
  CAN WE HAVE A CERTAIN DATE?

  I understand you very well buddy.
  It s always pity if the laptop is not working properly and if something needs to be replaced.

  I think there is a reason for the delay and I recommend you contact the ASP in Italy once more in order to clarify this matter.

• Ive been waiting for 20 minutes waiting for the consultant to apple. Must be a lot of problems apple these days

  Ive been waiting for 20 minutes waiting for the consultant to apple. Must be a lot of problems apple these days

  A twenty minute wait is not at all unusual.

• Should I buy a MacBook Pro now or wait for the WWDC

  Hello

  Well, I want to buy a MacBook Pro (my first one ever). However, I have read on some sites there is a new version of the MacBook Pro this year (at WWDC).

  Now I'm totally confused. I want to use a MacBook Pro 15 "(8 Go de RAM et 552 Go SSD) to work on large data / Business Intelligence technologies and programming."

  But I don't know if I have to wait for these new features or go ahead and buy this one now. And if these new features will be most useful for what I want to do.

  Thanks in advance.

  Apple has specifically discourages discussions on these forums about what and when the new products will be introduced and what changes there may be.

  The best advice is, what your needs are and this current model meets the.  If so, buy it, if not, don't buy it.   My observation of past changes in the introduction of new models is that the changes are incremental, not radical.  My primary MBP is a 2011 model (with 16 GB of RAM and an SSD hard drive) and I still do not feel outclassed by the current culture.

  Ciao.

• Tecra M3 or get overheated - need to wait for the new motherboard

  My Tecra M3 (serial number X5621357G) fan started working at maximum speed in November.
  Technical support Toshiba in Greece kept for repair of 26 November 2007 to 14 December 2007.

  They changed the motherboard and the fan. After this repair, the fan started working again at maximum speed and immediately after that the computer has been 'frozen getting' (has stopped working - had to pull the power cable to restart).

  Toshiba service asked me to reinstall Windows, but this doesn't solve the problem.
  Took the computer back to ASP on December 24, 2007. Now, they say that it is still a hardware problem and they have to wait for a new motherboard. It will be available on January 7, 2008!
  I don't have a laptop for over a month.

  Post edited by: ADMIN

  Hello

  Really, I can understand your frustration and it s always a stupid situation if any equipment malfunctioning, and if certain parts need to be replaced.

  I guess you have to wait a little bit more because the motherboard seems to be on hand and must be provided of the warehouse of head of Toshiba.
  Extra, you should consider that you sent it to EPA on December 24, 2007 and as I m not wrong most companies and service points are closed for Christmas

  Good luck and please don t lose patience. Happy new year

• I try and put music on my phone through the Apple music and it says something about waiting for 90 days. Anyone know what it is or how to ignore it?

  I try and put music on my phone through the Apple music and it says something about waiting for 90 days. Anyone know what it is or how to ignore it?

  Looks like you may have recently changes your Apple ID you use iTunes on your iPhone.  When you change this ID, you are locked for 90 days.  You can change to another code, but you can download past purchases or save the content on your device until the expiry of this original lock.  When you change IDs the first time it is a nice warning that appears and asks if you are sure that you'll be locked in this ID for 90 days.  There is no way around the lock, other only of waiting.  I think that this prevents you form jittering in all your Apple ID friends and just download all, but that's probably what you're going through right now.  Good luck!

• "Waiting for in time (RT PXI target) real answer" error when the program is waiting interruptions

  Hello

  I developed an application to detect interruptions generated by an electronic card and act accordingly. The program was developed in labview, but she calls a dll; created with labwindows. The dll is scheduled to open the visa communication, select the events and install the interrupt handler and when an interruption is detected, it reads the value of the different registers of the map and returns to labview to view.

  The problem is that when the program expects an interruption, a prompt appears with the message "Waiting for real-time (RT PXI target) real answer" and the only option I have is to click on the button to disconnect the pxi or just wait. If I wait and I generate an interrupt, the prompt disappears and the application view data as it was planned.

  To wait for the following code the interruption has been programmed into the function:

  While (flag == 0)

  {

  Sleep (1000);

  }

  When an interruption occurs, the value of flag set to 1 and function continues without any problem. I am not really sure, but here is probably the problem and it probably isn't the best way to wait for a break because the sleep function suspends the thread to the configured time, but at least the load calculation in the PXI is between 0 and 1%. I was wondering if anyone knows how to wait for a break without 'lost' communication with PXI and if there is a better way to do it.

  Any response will be welcome and thank you for them,

  Jaime

  Hey there.

  You see problems with connectivity it's because the thread by DEFAULT CallLibrary nodes running in is the UI (UI) thread - UI thread manages also the important things like, say, communications (especially all the connections for the VI server) and other things that you could run all the time.  A CallLibraryNode is not, by default, intended to be used to execute code that runs for a long period of time.  If you want to do this, you assign the execution of the CallLibrary node to run in the context of a LabVIEW run-time engine thread (by selecting to make it work "in any thread") and not the UI thread.  This can be done through the properties of the CallLibraryNode.  By selecting "run in any thread" the call DLL will be generally in the context of the thread running in the run LabVIEW, which is usually what is meant when even.  The VI CallLibraryNode color change of Orange (UI) to blue (LabVIEW thread) so that you can quickly tell what context the appeal will be in.

  The reason the interface thread user is the default thread is because most often DLLS calls need to be serialized (because of functions is not not thread-safe) and so it serves to protect the integrity of the system.  However, if you know your threads are thread-safe, or you will use these threads for a while, it is best to program the CallLibraryNode to use a Thread of LabVIEW execution rather than the UI thread.

  For more information on this review on these pages:

  https://decibel.NI.com/content/docs/doc-9069

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvexcodeconcepts/configuring_the_clf_node/

  DLL' happy ing.

  -Danny

• Status: Unexpected error has occurred. The timeout of waiting for an answer UVSC error internal

  Work with labview ARM and it was working fine this morning.  I went to run a program and the build failed with the following message.

  [13: 34:50] status: error
  An unexpected error has occurred.

  [Source: the timeout of waiting for an answer]

  Internal error UVSC

  Detail: [UVSC_PRJ_LOAD, MSG: 0x1000, STATUS:]
  [0x1] code: 1]

  Did normal things as restart the computer.  Plug and unplug the Board of Directors of the computer.

  I tried to reinstall the whole arm labview and it does not work.

  Even from labview so you go to tools > ARM > show keil does not work either.  I can open keil in itself, but it doesn't seem to be communicating with labview.

  Figured it out.  Somehow the projects I was working on has been corrupted somehow.  After another reinstalled, I opened a sample project, not one of the many that are mine, and it worked.  I had copy and past the code on the project and in a new, but it works.  Don't know how my projects I screwed up in the middle of work on them.

  Now, back to actually do the work.

• Looking for a Boolean function similar to or, but do not wait for the second entry in case he gets a 'real' a single entry

  my program works in 2 processes in parallel inside a while loop and should stop when one of them ends.

  How can I do? Uses the function 'Or' wire loop the stop condition will not do the job, waiting for the two processes to give their comments before running.

  What I really need is a function that waits until she gets a 'true' through one of its entry and then executes without waiting than the other.

  Y at - it such an option?

  If not, does anyone have an idea how to achieve what I have described here?

  Thanks in advance!

  What you need is a "not synchronous or", i.e. "do something if Item 1 becomes real GOLD point 2 becomes true.  One way that comes to mind to do is with a design of producer/consumer model (event), where the consumer is a State Machine with a shutdown state.  Get 1 point to trigger an event (perhaps using a user event or property Value Change (follow the signs)) when it turns out true, and have it send to the consumer the Stop State.  Download point 2, to do the same thing.  Now one of them becoming true will cause the shutdown state be registered (without taking care of doing the other element), in other words, that becomes a real, (consumer) loop stops.

  Bob Schor

• Wait for the execution of all the

  Hello

  I have a simple question about the option "wait for complete execution" using new:

  the appellant until AFTER the execution of the cleaning or just after the main sequence?

  concerning

  At the end of the cleaning to the tag.

  Hope this helps,

• get the structure of the event inside the while loop to wait for event occurs before the execution

  Hello

  I have a small problem, when I raise an event using a value change button, which works very well.  The problem is that the VI does not wait for me raise an event and instead runs the same event again, even if I have not pressed the button to start again.  The mechanical action of the button switch is released is.

  I was wondering how you get the structure of the event to wait for a user event, after that he executed the first time.

  James.Morris wrote:

  There is no reason that the event should be raised twice as much that the only way that it fires in your code is by the user by clicking on 'Hall measure only'.

  Oh yes, there is, and I deserve a kudo for this one.  Mechanical action on the button is set on the switch until published, so click to generate an event, on the bottom and on the square, attached is an example.

  My boy has my students hate this question, and to be honest, I hated it.  When never would you do that intentionally?  Honestly?  Anyway to change the button back to normal (as default latch when released) and move the terminal button in the structure of the event where it is managed and it will work as usual.

• remove the pop up message "Waiting for in time real (target CompactRIO RT) to answer.

  Is there a way to remove the pop-up message "Waiting for in time real (target CompactRIO RT) to answer" what power is removed the cRIO or when the network cable is disconnected?

  Hey Danny,

  How did send you the commands to the Windows PC the cRIO? You use the remote FPGA host Interface?

  I've seen the pop-up dialog box when the LabVIEW project is not present.

  If you create a Windows VI that sends orders via shared variables or other network mechanism to a VI RT, which in turn controls your FPGA VI, then you should not ever see the popup you speak.

  This tutorial walks through creating an example of monitoring on cRIO with three screws as indicated:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/11199#toc4

  This tutorial is an example of the use of a shared variable to implement a heartbeat, to determine if the cRIO is connected:

  http://decibel.NI.com/content/docs/doc-11046

  I hope this helps.

• Delay (30000 milliseconds) waiting for the SNMP service to communicate.

  When I start the SNMP service in Windows Server 2003 Enterprise 64-bit (SP2), the event ID 7009 (Timeout (30000 milliseconds) waiting for the SNMP service to communicate.), kindly help me to solve this problem.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads