The Win7 installation select a driver

Similar Questions

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• 4540 proBook s: help to the New Installation of hard drive recovery

  I had a bad hard drive crash. I installed a new and got the bios to boot from the cd drive, with windows 7

  orginal cd of installation in the drive.  He acknowledged drive 0, I clicked again in the options. He created a system partition.

  Installed windows 7 apparently very well. Inserted the recovery driver and application and installed disk. Everything seemed fine. This morning I turned it on and it the hard drive error (3F0) Please install an operating system. I shut it down and restarted, it seemed normal.  I installed a few programs, stop it again. Returned by, it starts again and it took me to screen diagnosis saying SMART Check - not installed and short DST - not installed...  Can someone tell me how to remove that partition and I can format the drive in a usb sata enclosure and try again.

  Please tell me the correct procedure to return this laptop running to a factory State. I have the original Windows7 and Windows8, Driver and Application for the two OS disks ' are...  I want to stay with the installation Windows7.

  Thanks for any help on this problem. I have no idea where I was wrong!

  It is not impossible that the new disk is bad, have seen before. It is also possible that the controller sata on the motherboard is bad, but I'd watch this last possibility. You can get an Exchange on the new hard drive?

• What is the Windows Installer requires a drive of market research?

  all of a sudden when I try to print something a box appears saying that the ' '...      "WINDOWS INSTALL NEEDS A DISC"MARKET RESEARCH. " I DOWNLOADED ALL THE PATCHES FOR XP AND ALSO DELETED AND REINSTALLED THE PRINTER.  WHAT IS THE MICROSOFT REPAIR INSTALL?

  Hi FondaWhitefield,

  ·         Do you have any program related market research?

  ·         This fixes that you already tried?

  Try the following.

  Method 1: Go through the Add/Remove Programs list and see if market research is listed in the list of installed applications. If so, uninstall it and see if that solves your printing problem.

  Method 2: Follow the steps in the article mentioned below.

  Error message "Could access the Windows Installer Service" when you install a program in Windows XP

• Default values for the Win7 installation in Chinese?

  Hello

  New to the Mac world, but still need some MS products to run on an image of Win7 (MS PRoject, Visio).  I installed VMWare Fusion 4 and then created an image of Win7 using my install media.  However, it has failed to install Chinese and I'm not invited anywhere in the install to correct this.

  Anyone faced similar experiences and how come me on that?

  Appreciate any assistance.

  Mark

  Welcome to the community,

  I guess that you have selected the 'Easy Install' function when creating the virtual machine. This sometimes causes questions of 'language '. To resolve this problem, run the installation without using Easy Install.

  André

• Qosmio F60 - new SSD now will not appear in the BIOS or at the Win7 Installation

  I recently bought a new OCZ Vertex 4 128 GB Solid State Drive to upgrade my PC laptop Toshiba Qosmio F60 with.

  After that I installed it first of all, it has been detected immediately in both the bios and during the installation of Windows 7. However, for some reason any approximately 40% of the way through installation, the computer restarts and the drive has disappeared since the BIOS all together and now, after several reboots it does not always detect!

  Note that I already have the latest version of the BIOS installed on my laptop V2.70

  I'm not sure what I would do here and any help would be appreciated?

  Can you please set BIOS to default settings and check if the SSD is recognized in the BIOS again?
  > Please note that I already have the latest version of the BIOS installed on my laptop V2.70
  In my opinion it is not relevant at all.

• Identify the ESXi Installation on Local drive

  Hi teams

  We use ESXi 5.0 and have 2 Local datastore disk detected.

  I want to know where the ESXi installed OS and how to get it?

  Rgds

  Pet

  esxcfg-scsidevs - f

  Should steer you the VFAT devices and where they are stored. The devices are used by the installation of ESX.

• Qosmio X 875-installation of the Win7 graphics driver

  I recently bought a TOSHIBA Qosmio X 875 - Q7380 with Windows 8. I went down to Windows 7 64 bit OS.
  Everything is fine except for the graphics drivers. When I try to install the driver NVIDIA (GeForce GTX 670 M) it says that I need to install the Intel driver first.

  So I find and attempt to install the Intel graphics driver and it says that my computer does not meet the minimum requirements for this software.
  What Miss me?

  How did the laptop changes between the use of the cards? I can't find anything in the Bios. I'm not able to install the graphics card intel because it is disabled for the NVIDIA card?

  How can I get the graphics driver intel installed so I can install the NVIDIA driver?

  Have you tried the Intel® HD Graphics 4000 driver?
  This is the driver that should work:
  http://Downloadcenter.Intel.com/Detail_Desc.aspx?lang=eng & changeLang = true & dId = 22376 DWNL

  The zipped package.
  You must decompress this first. Then you might want to update the driver through Device Manager by pointing to the folder of the driver that you have unpacked above.

  and there is no possibility to switch between graphics cards.

• j6410 over wifi is detected but not settled it on Win7 with the new installation of OJJ6400_Full_13.exe

  Dear all,

  I try to install my printer all in one HP Officejet J6410 (connected to an access point) wireless to my HP Pavilion dv5-1155eg laptop running Windows 7 Professional (ENG). I am trying to install using the new "HP Officejet Full Feature Software and Driver" (OJJ6400_Full_13.exe) for the specified printer. ""

  The rest of the HP software installation succeeded it. I am able to see the web interface of the printer from my browser. In the past, before the release of this new driver I could even print wirelessly, using the base driver provided by Win7.

  What fails is the installation of the printer itself:

  I use the software to 'Add a device' the HP that successfully locates my printer wireless in the screen "found network printers." I selects the printer, press 'Next', Network Diagnostics seems to run ok and then start the installation of the printer, it is firstly says 'printer detected... ". "but she eventually fails with the message:" printer setup is not complete - click Retry to try install again... blah blah. "

  To make richer information, I use a firewall of G Data Internet Security 2010 that I followed him and I can see that it is not blocking anything. I even tried installing with the firewall disabled, anyway...

  In addition, I tested my printer with HP Network Diagnostic Utility. The utility comes with all the information correctly (network configuration, configuration of the computer, HP printer running services, found wireless).

  Any help is appreciated to make it work because it's a major drawback, as you can understand...

  Thank you in advance...

  Thanks for the reply, but that was not the solution... As I mentioned earlier, I had tried in the first place without the firewall installation.

  But, I found a good solution to the problem, and because it might be useful to others I write it here:

  After the movie with the help of HP without success, I managed to find a workaround for the problem:

  1. I uninstalled everyhting about printer software/drivers & restarted windows.
  2. I installed the begin shape everything (the file I downloaded on the site of HP), using the USB option this time and not a wireless.
  3. RESTART WINDOWS (sucks bigtime - respect for unix/linux "reboot is for material changes!")
  4. After you have installed successfully with the USB cable, I chose the option 'Configure wireless settings' Installer extracted files resulting from the file I downloaded frrm the HP site (if after installation, the installer window is closed you will need to locate the extracted in your Temp folder files or just run the file again..). Just follow the instructions of the installer.
  5. This should make the thing! REBOOT (again) and you're ready to go!
  6. (OPTIONAL) For me, the installer actually worked at the last moment, where he stuck permanently. But that was ok, because it's stuck after you set up the printer and corresponding software. After some time, the installer came out with the usual submit an evaluation form. Just ignore it, reboot and everyhting should work. At least it did for me...

  See you soon

• Bookmarks to Safari from backup to the New Installation drive

  Failing HARD drive. Fortunately just copied HDD external HDD before the failure. New Safari installation on the new HARD drive. How to make bookmarks and favorites of the old disk backup on external drive for the new Safari installation on the new HARD drive?

  How do you have copied the data externally? You want to backup the folder User/Library/Safari, but how to get that depends on how you copied. If it's a Time Machine backup, go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select library/Safari. Enter Time Machine and restore this file.

  If the outside is bootable, boot off of it, do what above, and then copy the folder to the library user to internal drives.

• Because I bought a full version of 7, I buy a license and install the win7 os or I have to buy another drive for an upgrade to another machine?

  WinXP Win7 upgrade options

  I had a HP machine with xp that has failed. Bought a full blown and installed on a new PC win7 os. I still have another machine hp with xp on it. Because I bought a full version of 7, I buy a license and install the win7 os or I have to buy another drive for an upgrade to another machine?

  Product keys are not sold without installation media.

  Don't buy product keys for sites that sell just a product key - they are not authentic.

  You can buy Windows 7 Upgrade here (or at a local store):

  http://www.microsoftstore.com/store/msstore/cat/CategoryID.44066700

  There is no discount on a second license of Windows 7 If you already have a Windows 7 license.

  How to install Windows 7:

  When you have XP:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

• Legalize the illegal installation of Win7

  Some time ago I installed a copy of Windows 7 Premium torrented and activated using a kind of rootkit. However, the rootkit is wrong, and although it would be possible to repair it, I can't be arsed.

  Basically, I just want to buy a legal copy cq. product key for Windows 7 and use it to activate my current installation.

  However, the installed version is the ultimate and I never have, I want to just buy a copy of the Home Premium edition. A few mentions of document helps that I'll have to make one adjusted install "downgrade" my ultimate to Home Premium edition. However I can't find any other information. I seriously don't want to reinstall Windows at this point.

  I know that install Windows 7 on an existing installation will move the main directories in a directory 'Windows.old '. This means that it would be a completely clean install, as a matter of fact. These directories include the program files, users, and windows. Older versions of Windows used to have options 'replaces the current installation"but I don't see that here.

  I feel like a sell-out anyway because I am fundamentally opposed to online activation systems: p. because it's an addiction that requires internet access. A bit like the Logitech EU Smart Radio, which cannot play the music (on the network) If you have an internet connection active on the servers of Logitech. And some hardware device drivers (for gaming Razer products, for example) only loads the driver/config when the Setup program is able to connect to their "cloud". They thought it would be cool if the driver settings had been registered on the internet. Screw that, more horrible config program they ever designed.

  For Windows, the problem is less pronounced, but I do not like my system "phone home" after a few days/weeks/months check the «activation status» This implies a current dependence that one day may begin to bite me in the lacrosse. (You can even buy Windows 7 no more in the Microsoft store, nor are it possible to just buy a key and this forced obsolescence is not something that I'm willing to support, or in my own interest.)

  Providers can even dismantle these activation systems when they want more people to use (this version) software.

  So, I'm still not clear what I want to do, but I thought I'd ask anyway if it was possible to go down and then enter a new product key.

  Best regards, Bart

  Some time ago I installed a copy of Windows 7 Premium torrented and activated using a kind of rootkit. However, the rootkit is wrong, and although it would be possible to repair it, I can't be arsed.

  Basically, I just want to buy a legal copy cq. product key for Windows 7 and use it to activate my current installation.

  Well, you can buy a package of retail or OEM System Builder License for the desired edition you want in order to get the product key. Product keys are not sold separately.

  However, the installed version is the ultimate and I never have, I want to just buy a copy of the Home Premium edition. A few mentions of document helps that I'll have to make one adjusted install "downgrade" my ultimate to Home Premium edition. However I can't find any other information. I seriously don't want to reinstall Windows at this point.

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Version upgrade-

  Microsoft Windows 7 Home Premium Upgrade

  Family Pack:

  Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)

  You can use the following method to downgrade the current edition installed all while preserving your personal files and applications:

  http://techingiteasy.WordPress.com/2012/05/12/how-to-downgrade-Windows-7-editions/

  I know that install Windows 7 on an existing installation will move the main directories in a directory 'Windows.old '. This means that it would be a completely clean install, as a matter of fact. These directories include the program files, users, and windows. Older versions of Windows used to have options 'replaces the current installation"but I don't see that here.

  Because you're downgraded to lower edition, he of course by default requires a custom installation that moves from the old installation to a folder named Windows.old. That's how it's done:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  I feel like a sell-out anyway because I am fundamentally opposed to online activation systems: p. because it's an addiction that requires internet access. A bit like the Logitech EU Smart Radio, which cannot play the music (on the network) If you have an internet connection active on the servers of Logitech. And some hardware device drivers (for gaming Razer products, for example) only loads the driver/config when the Setup program is able to connect to their "cloud". They thought it would be cool if the driver settings had been registered on the internet. Screw that, more horrible config program they ever designed.

  For Windows, the problem is less pronounced, but I do not like my system "phone home" after a few days/weeks/months check the «activation status» This implies a current dependence that one day may begin to bite me in the lacrosse. (You can even buy Windows 7 no more in the Microsoft store, nor are it possible to just buy a key and this forced obsolescence is not something that I'm willing to support, or in my own interest.)

  Providers can even dismantle these activation systems when they want more people to use (this version) software.

  So, I'm still not clear what I want to do, but I thought I'd ask anyway if it was possible to go down and then enter a new product key.

  Best regards, Bart

• Tecra S3 RAID-0, the Linux installer does not recognize the hard drive

  Hello

  I've been googleling much and the only one I found is a post on this forum: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8758

  I have the same problem, the RAID controller is not recognized by one of the distributions of linux in circulation, and so the hard drive is not recognized, so the linux installation is not possible. I tried FC7 and SUSE9. Due to the demands of work, I need to install FC7.

  If there is no driver available for linux, it is possible to disable the RAID controller on the laptop? If so, is that someone could put a guide of how do, or send me to a good link on the subject?

  Thank you
  Alex

  You will be very happy if someone with S3 and Linux will write here. Until you wait for the check you must fill the pages of Linux support:
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html

  Maybe you will find some info here.

  Bye and good luck!

• Driver.cab cannot copy on the re-installation of windows xp... help

  well hoping that someone can help because I'm lost...

  two weeks that ag has a virus that struck my notebook bad, then last night, that I decided re - install windows xp using the cd, everything has started big until the computer failed to copy some files to the cd. I chose to ignore copy them these files to upload later installation had compeleted. This is where I am stuck I can't get them anywhere. I tried to copy from the CD-ROM I386 folder, but it fails to make the copy.

  Anyway the files I need are;

  Driver.cab

  Hypertrm.chm

  Iashlpr.dll

  iasnap.dll

  Iassam.dll

  kodak_dc. ICM

  If someone could point me in the right direction to a place I can download these files or can happen to other ideas that will solve my problem, it would be much appreciated. also if someone could tell where each file should be copied in which would also be a great help

  Thanks for your comments, but now solved the problem I had. I copied the file from another computer driver.cab, updated some drivers for my network card, then I was able to get the rest of the files I needed through automatic updates, end only took an hour and so far no problem

• How can I empty the Windows installation on my hard drive?

  How can I empty the Windows installation on my hard drive, please?  I was going to re - install, then I changed my mind.
  Now, every time that I reboot, instead of launching Windows XP Pro, it try to run Windows installation.  The installation program appears as a second menu item under "Windows XP Pro" on the black screen at launch.

  How can I remove it from the startup screen and flush it out of my system?

  Any correction, automated for this?

  Thank you.

  It is difficult to determine what you did, but the symptoms you describe can be eliminated by editing the boot.ini file (you can also make things really difficult if you make a mistake when you edit the boot.ini file, so be careful).  Will not be "flush out the Windows installation" of your system, but it will stop the menu from appearing at startup time.

  See http://support.microsoft.com/kb/289022

  Your boot.ini file probably has a second line in the [operating systems] section.  Make sure that you delete only the line that points to the installation routine.